Windmill Suppliers and Manufacturers

We take pleasure, introducing ourselves as a manufacturer and supplier of renewable energy systems like, micro windmills only or solar only and micro windmills+solar light system and solar water heaters / solar steam generators and range of led lights and other allied products. Our company is supplier of various solar equipments for domestic as well as industrial applications; we offer our product and services at very competitive rate. We bring together all aspects of green building engineering and green infrastructure design, and engineering audit work all as required by client under one roof. The green engineering design & electrical audit services we generally provide are as listed below: Wind power Solar power Hybrid systems Solar steam generating system Electrical audit Green building prospects We have the range of windmills starting from 650 watts to 4.2 kw. Weight from 21 kgs to 89 kgs only without packing.

Vs/vsm model has simple design and is good at setup. It's very easily started. 3 phase permanent magnet ac generator, direct driven, no gearbox, and not need windward. It has perfect performance especially in the low wind speed area or city buildings. Furthermore, because of its multiblades, fully sucking in wind, it can arrive high power range as 5kw even in small sizer.

Model : C-30 1-2pcs : 50 3-99pcs : 8.62 100-999pcs : 5.46 >1000pcs : 3.38 N.G(g) : 112

Introduction: Windmill blade transport adapter trailer is used for the wind blade transportation in mountains mainly. Because of the multiplex road conditions in the mountain, the normal extendable type flatbed trailer for wind blade transport can not work for its length up to 50-80 meters after extended, this is why we design this type of adaptor for the blade transport. The rotor blade adapter trailer has mainly two parts including the walking trailers and the rotor adapter. The walking trailer is designed according to the modular trailer normally. With different types of blade requirements, we shall take different options. The rotor adapter on the top is designed according to the windmill blade that is provided by the customers. https://www.sinoheavytrailer.com/product/en/Product-wind-blade-adapter-blade-haulage-trailer.html FAQ: 1) Is the rotor blade adapter trailer suitable for normal road transportation? Yes, the rotor blade adapter trailer is able to work on the normal road, but because of it's costly than the normal extendable type flatbed trailers. It needs to be concerned about it's open to a question. 2) Can we use the Nicolas type modular trailer for the windmill blade adaptor trailer? It's possible. There are questions like this, the Nicolas type modular trailer is much costly than the trailer that we use, and also the stability of the Nicolas it not so stable too. 3) I notice that the axles of the rotor adapter trailer are extendable, why is that? The windmill blade trailer that we produced with extendable axles is used for the super long blade transport to strengthen its stability. Key features: Extendable axles for different road conditions to guarantee the stability of the blade transportation. Extending axles are controlled by the hydraulic system, it's able to extend no matter it's running or stock-still. Engineers who have more than 20 years of trailer designning to support the trailers producing. Rotor blade adapter trailer is able to transport 40-80 meters wind energy blade transportation with different models of adapter trailers. Length extendable rotor blade adapter working platforms provide enough space for the counterweight.

With a piece solar panel on top to absorb sunshine to make the power for the light W a small led light Can add other function on the pedestal, such as clock, thermometer, hygrometer, compass, name card holder and more Can engrave the logo information Material: abs Light: led lamp Solar panel: polycrystalline Compliant with Ce standards and Rohs directive

Wind Driven Turbine Air Ventilator Roof Fan Exhaust Fan Stainless Steel Wind Turbine Ventilator with Base Plate 610mm /Model NO. 600mm/Material Stainless Steel/Blade Material: Stainless Steel/Type: Axial Fan Mounting :Roof Fan /Certification: ISO, CE, CCC /Ball Dia: 750 /Throat Dia: 600/ Weight: 11.6kgs/Usage: Ventilation/Transport Package : Standard Export Carton/Origin: China

About us: Is a professional wind turbine manufacturer. Our hot products have following three series: 1.Vertical axis wind turbine: Packaging details: plywood cases or according to your need Delivery detail: within 7 -15 days, this according to the quantity

3D Christmas Santa Claus on Bike Windmill

wind turbine Models: 1). FD 2.2-300W ( Rotor diameter 2.2m) 2). FD 2.5-500W ( Rotor diameter 2.5m) 3). FD 2.8-1kW ( Rotor diameter 2.8m) 4). FD 3.2-2kW ( Rotor diameter 3.2m) 5). FD 3.8-2.5kW ( Rotor diameter 3.8m) 6). FD 4-3kW ( Rotor diameter 4m) 7). FD 5-5kW ( Rotor diameter 5m) 8). FD 8-10kw ( Rotor diameter 8m) 9). FD12-20kW ( Rotor diameter 12m) 10). FD14-30kW ( Rotor diameter 14m) 11). FD 23-60KW ( ( Rotor diameter 23m) horizontal axis 3 phase ac permanent magnet generator 3 blades Blades material: FRP Can provide complete system: wind turbine + controller + inverter + tower Small wind turbine sales 300w to 60 kw. High quality units manufactured in an ISO-9001 facility and has CE certification. On Grid or Off grid configurations available. Free standing or Guy wire towers available. plywood case

Wind power generator, vertiacal-axis wind turbine, hawt.......

Quality guarantee: 1.Two-year limited guarantee 2.Highest quality manufacturing standards (iso9001) 3.Wide range of temperature tolerance (-20¡æ¡§d65¡æ) 4.High salt fog, dust and sand resistance 5.Strong wind resistance and high survival wind speed 6.Durable materials and components(i.E. Sweden's skf bearing) Easy transportation and installation: 1.Light and compact size 2.Intuitive online installation guides 3.Wide installation and maintenance network worldwide 4.Perfect after-sales service system Dimensions Technical specifications¡êo Model Airforce 4.1 Rated output power 5 kw Max. Output power 5.1 kw Rated wind speed Grid-tied 380vdc / off-grid 48vdc Max. Wind speed 12 m/s Survival wind speed 20 m/s Start-up wind speed 60 m/s Cut-in wind speed 1.5 m/s Rated rotational speed 2 m/s Max. Rotational speed 390 rpm No. Of blades 455 rpm Rated output power 3 Rotor diameter 4.1 m Blade length 2.02 m Blade material Frp Generator 3 phases pm generator Braking system Electromagnetic braking control system Type Downwind rotor Yaw control Passive Total weight 120 kg Warranty Whole system-2 years Controller Full-automatic control Tower 12 m(optional) Power curve¡êo Totla weight¡êo188 kg Generator¡êo73cm*60cm*53cm 0.232cbm Blades¡êo210cm*55cm*56cm 0.646cbm

Product description Wind turbine / wind power generator 1. Dual, automatic emergency braking system. 2. Unique anti-vibration design. 3. Waterproofing. 4. Unique anti-vibration design. 5. Efficient aero-dynamic design, compared with the vertical shaft, power utilization rate is greatly improved. 6. High strength, corrosion resisting aluminium alloy. 7. Unique permanent magnetic material generator, small size, light weight, power output is very high. 8. Low noise level. Model Nl-3kl-w Rated powe,3kw Rated voltage(dcv) 240v Rated voltage(dca) 17v Wind wheel diameter 4m Blade material Gfrp strengthening Blade numbe,3 Started wind speed 3.0m/s Rated wind speed 10 m/s Safety wind speed 40m/s Upwind method Upwind Rated rotating speed(rpm) 300 Tower height 9m Generato,Asynchronous Braking system Electronic magnet+manual Protection grade Ip55 Noise level ¡Ü55db Insulation class F Operation mode Automatic or manual Suggested battery capacity 12v 200ah 10pcs Efficiency 0.85

Leo at qdfzy.Com Model:Fzy300w, Rotor diameter:2.2m, Blades quantity:3 pcs, Blades material:Frp (fiber reinforce plastic), Rated speed:400r/min, Rated output power: 300w, Max output power: 450w, Output voltage: dc24vor 12v/ac220v, Start wind speed:3m/s, Rated wind speed:8m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation:Yaw& magnetic resistance, Charge control:Aic (automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 750kwh, Recommended accumulators:12v100ah 1-2 pcs( 200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower(optinal), Tower height:6m (optional), Weight:20kgs (without tower), Can supply power for: lighting, electric fan and charger, Plywood box

Leo at qdfzy.Com Model: Fzy600w, Rotor diameter: 2.5m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 400r/min, Rated output power: 600w, Max output power: 750w, Output voltage: dc24v/ac220v, Start wind speed: 3m/s, Rated wind speed: 8m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw& magnetic resistance, Charge control: Aic (automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 1500kwh, Recommended accumulators: 12v150ah2pcs( 300ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower(optinal), Tower height: 6m (optional), Weight: 40kgs (without tower), Can supply power for: color tv, lighting, electric fan and charger, Plywood box

Model Fzy1kw, Rotor diameter: 2.8m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 360r/min, Rated output power: 1kw, Max output power: 1500w, Output voltage: dc24v 48v/ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 2500kwh, Recommended accumulators: 12v150ah4pcs( 600ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 45kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box

Model: Fzy2kw, Rotor diameter: 3.2m, Blades quantity: 3 pcs, Blades material: Frp (fiber reinforce plastic), Rated speed: 320r/min, Rated output power: 2kw, Max output power: 3kw, Output voltage: dc48v 72v 96v /ac220v, Start wind speed: 2.5m/s, Rated wind speed: 9m/s, Working wind speed: 3-25m/s, Security wind speed: 40m/s, Speed regulation: Yaw&magnetic resistance, Charge control: Aic(automatic intelligent control), Wind turbine type: pmg (permanent magnet generator), Working temperature: from -40 to +60, Annual average energy production: 5000kwh, Recommended accumulators: 12v200ah6pcs( 1200ah ), Accumulators full charge time: about 8 hours, Tower type: pull wire tubular tower or cone tower, Tower height: 6m (optional), Weight: 80kgs (without tower), Can supply power for: air-condition refrigerator water pump electric cooker tv washer illumine fanner charge, Plywood box

Model Fzy3kw, Rotor diameter 4m, Blades quantity 3 pcs, Blades material Frp (fiber reinforce plastic), Rated speed 260r/min, Rated output power 3kw, Max output power 4500w, Output voltage dc120-240v/ac110-240v, Start wind speed 3m/s, Rated wind speed 10m/s, Working wind speed 3-25m/s, Security wind speed 40m/s, Speed regulation Yaw& magnetic resistance, Charge control Aic (automatic intelligent control), Wind turbine type pmg (permanent magnet generator), Working temperature from -40 to +60, Annual average energy production 7500kwh, Recommended accumulators 12v200ah10 pcs( 2000ah ), Accumulators full charge time about 10 hours, Tower type pull wire tubular tower, Tower height 8m (optional), Weight 120kgs (without tower), Can supply power for air-condition. Refrigerator water pump. Electric cooker.Tv.Washer. Illumine. Fanner. Charge, Plywood box

Horizontal axis wind turbine. Wooden packing

Small wind energy systems that are connected to the electricity distribution system are called grid-connected systems (on grid). A grid-connected wind turbine reduces the power consumption from the utility company and can be used for lighting, appliances, electric heat etc. When the wind system produces more electricity than required, the excess is sold to the utility company. Whenever wind powering is insufficient, the grid system fills the gap. The grid connected applications are implemented successfully in countries that have introduced an incentive plan for renewable energy. The incentive plan may include subsidies on installation, net metering option, and subsidized feed-in tariffs (fit) otherwise known as renewable energy payments. Calla glory grid tied wind turbines including eg30kw, eg50kw which can work under on-grid circumstance without an extra inverter which is different from regular wind turbine generator system. Wood box