Power : 400w , minimum wind speed : 3m/s , battery:12v, 150ah , inverter : 1kva
Type Rice Milling Machine Condition Used Automatic Grade Fully Automatic Driven Electric Material SS Port India port
Rice Rubber Roller is a spare part for the rice huller machine. The rice huller machine can operate continuously at high hulling rates for 24 hours non-stop thanks to its superior abrasion resistance. In order to separate the rice husk from the grain, rice mills use rice rubber rollers. Rice Rubber Rolls have a significant impact on the rice production businesses. To get the most milled rice out of the paddy with the least amount of breakage, we provide different sizes of high-quality Paddy De-Husking Rice Rubber rolls. 1. Rubber Roll 6 2. Rubber Rolls 10 3. Rubber Rolls 12 4. Rubber Rolls 14 5. Rubber Rolls 20 Advantages Adequate Resiliency Well-balanced hardness Great resistance to wear Maximum hulling rate and capacity Lowest breaking rate Climate Resistance Heat Resistant Opt for each variety of paddy produced in the world
Model name V400 Rated power 400w Max power 500w Output voltage 12v/24v Start wind speed 2.5m/s Rated wind speed 11m/s Working wind speed 2.5-45m/s Gross weight 9kg Rotor diameter 1.33m Blade number 3 Blade material Cfrp Generator Three-phase permanent magnet synchronous generator Control system Manual&electromagnetic brake Tower pole type 6m Capacity and quantity of battery(reference) 12v100ah 2pcs Can supply power for Lighting, electric fan, tv 79*40*23cm 11.5kg
Model name V600 Rated power 600w Max power 700w Output voltage 24v Start wind speed 2.0m/s Rated wind speed 13m/s Working wind speed 2-45m/s Gross weight 15kg Rotor diameter 1.85m Blade number 3 Blade material Cfrp Generator Three-phase permanent magnet synchronous generator Control system Manual&electromagnetic brake Tower pole type 6m Capacity and quantity of battery(reference) 12v100ah 2pcs Can supply power for Lighting, electric fan, tv, washer. 98*58*26cm 18kg.
Parameter Rated power(W) : 10000 Rated voltage(DCV) : 240 Rated current(DCA) : 42 Rotor diameter(m) : 8.0 Blade material : GFRP Rotation direction : Clockwise Start-up wind speed(m/s) : 2.5 Rated wind speed(m/s) : 10 Cut-out wind speed(m/s) : 16 Survival wind speed(m/s) : 45 Net weight(T) : 1.0 Wind turbine type : Upwind Rated Rotating speed(RPM) : 180 Blades No. : 3 Hydraulic tower height (m) : 12 Yaw mechanism : Electrical Annual yield(kwh) : 24000 Yaw mode : Auto/manual Efficiency : 0.85 Wind turbine tilt-angle : 6¡ã Protection mode : Yaw -Hydraulic brake -Dumpload. Plywood cases and weave bag.
Model S-600 Rated voltage dcv : 24 Rated current dca: 25 Rated power w : 600 Start-up wind speed m/s : 2.5 Rated wind speed m/s : 9.5 Security wind speed m/s : 45 Protection mode :Dump load Generator type : Pmg Rotor diameter m : 1.6 Blades quantity pcs : 3pcs Nacelle material : Carbon reinforced fiberglass Blades material : Carbon reinforced fiberglass Designed life time year :15 Warranty(year) : 2. Plywood cases and weave bag.
Generator Rating 50KW 59 rpm 50HZ/60HZ Windward way: upwind mode & down wind mode (recommend type is downwind mode) Induction motor: 55KW 1500RPM provided by SIEMENS(CHINA) Gear box type: level helical Service factor: 2.1 Weight: 3000kgs Blades Material: Fiberglass reinforced polyester Rotor diameter: 13.8m Swept area: 150m2 Weight: 240kgs Controller: Mitsubishi PLC Schneider contactor GPRS/ADSL remote control Touch screen interface . IP65 cabin Protection Mode High speed shaft brake--failure type brake Low speed shaft brake--disk brake Yawing brake--disk brake Operational Data Start-up wind speed: 2.5m/s Rated wind speed : 12.5m/s Cut-out wind speed: 20m/s Survival wind speed: 45m/s Tower Tower type:24m free standing tower Material: Hot dip galvanized steel Weight: 4200kgs. Plywood Cases And Weave Bag.
Quality guarantee: 1.Two-year limited guarantee 2.Highest quality manufacturing standards (iso9001) 3.Wide range of temperature tolerance (-20¡æ¡§d65¡æ) 4.High salt fog, dust and sand resistance 5.Strong wind resistance and high survival wind speed 6.Durable materials and components(i.E. Sweden's skf bearing) Easy transportation and installation: 1.Light and compact size 2.Intuitive online installation guides 3.Wide installation and maintenance network worldwide 4.Perfect after-sales service system Dimensions Technical specifications¡êo Model Airforce 4.1 Rated output power 5 kw Max. Output power 5.1 kw Rated wind speed Grid-tied 380vdc / off-grid 48vdc Max. Wind speed 12 m/s Survival wind speed 20 m/s Start-up wind speed 60 m/s Cut-in wind speed 1.5 m/s Rated rotational speed 2 m/s Max. Rotational speed 390 rpm No. Of blades 455 rpm Rated output power 3 Rotor diameter 4.1 m Blade length 2.02 m Blade material Frp Generator 3 phases pm generator Braking system Electromagnetic braking control system Type Downwind rotor Yaw control Passive Total weight 120 kg Warranty Whole system-2 years Controller Full-automatic control Tower 12 m(optional) Power curve¡êo Totla weight¡êo188 kg Generator¡êo73cm*60cm*53cm 0.232cbm Blades¡êo210cm*55cm*56cm 0.646cbm
CE,ISO certified for "Small Wind Turbine with High Reliability". 2.Low start up wind speed,less weight with low torque starting technique applied. 3.The design of blades: The blade casted into molding at one time with balance up to 99%. 4. Amazingly quiet operation with little or no vibration. 5. The turbine tail and yawing part (nylon and fiberglass materials with high strength) processed with reinforced ribs, enhance the reliability and can withstand the typhoon. 6.Carbon brush casted into molding at one time, it can reduce the contact resistance effectively and the lifetime is up to 100000 times 7.Easy installation, no welding needed. one pc in one carton
Product information Model: hummer wind turbine 2kw H-3.8-2kw wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power (w) 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter(m) 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0-370 Generator efficiency >0.8 Tower diameter(mm)114*2000*5 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs Plywood container.
The 5kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type) . It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for illumination, driving appliances, communication devices, electric tools and so on. The 5kw wind turbine is mainly composed of generator, blade, tail, hub, manual brake system, controller, dump loader, inverter, tower, tower base, cable , accessories. Main technical performances: Rotor diameter (m): 5.0 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 5000/7500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-25 Survived wind speed: 40 Rated rotate speed(r/min): 300 Start torque (n/m): 4.5 Working voltage: dc48v/dc240v Generator style: three phase, permanent magnet, ac Charging method : constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 8/10/12/13/15/18 Life time: >15years Generator/blade/tail /hub 164*61*38cm 140kg Controller 49*45*31cm 16kg
The 1kw wind turbine is an equipment to convert wind energy into electric power which is changed into storage battery group(off-grid type ) or feeding to ac grid (on-grid type). It can be widely used in rich wind areas but without normal energy supply from any power system .It is capable of providing power for lighting, tv, telecommunication equipment and so on. The 1kw wind turbine is mainly composed of generator, blade, tail, hub, controller, dump loader, inverter, tower, tower base, cable , accessories . Main technical performances Rotor diameter (m): 2.8 Material and number of the blades: reinforced fibber glass*3 Rated power/maximum power : 1000/1500 Rated wind speed (m/s): 10 Startup wind speed (m/s): 3 Working wind speed (m/s): 3-20 Survived wind speed: 35 Start torque (n/m): 1.5 Rated rotate speed(r/min): 500 Working voltage : dc24v /dc48v Generator style : three phase, permanent magnet, ac Charging method: constant voltage current saving Speed regulation method : electromagnetic brake+ yawing Stop method: electromagnetic brake+ manual Tower style : guy wire tower /free stand tower/ folded tower Tower height (m): 6/7/8/9/10 Life time: 15years Generator/blade/tail /hub 142*61*31cm 120kg Controller 49*45*31cm 16kg
Green energy---300w wind turbine Model number: fd2.6-300w Rotor blade diameter: 2.6m Number of blades: 3pcs Materials of blade: glass fiber Rated rotation speed: 400(r/m) Type of generator: permanent-magnet 3 phase ac Rated power: 300w Max power: 450w Output voltage: 12v/24v Cut-in wind velocity: 3(m/s) Working wind velocity: 3-25(m/s) Survival wind velocity: 40(m/s) Tower height: 6m Output controlling system: electrified controller & inverter Recommended batteries: 12v100ah, 2 pieces Can load: light, fan and charge and tv within 29 inch Authentication: ce and iso certificate Ce, iso
Green energy---5kw wind turbine Model number: fd6.0 íºc 5kw Rotor blade diameter: 6.0m Number of blades: 3pcs Materials of blade: glass fiber Rated rotation speed: 200(r/m) Type of generator: permanent-magnet 3 phase ac Rated power: 5000w Max power: 7000w Output voltage: 220v Cut-in wind velocity: 3(m/s) Rated wind velocity: 10(m/s) Working wind velocity: 3-30(m/s) Survival wind velocity: 50(m/s) Monopole tower height: 8m Output controlling system: electrified controller & inverter Recommended batteries: 12v100ah, 18 pieces Can load: light, fan, charger, tv, pump, washer, refrigerator, electric cooker and air conditioner Authentication: ce and iso certificate Iso, ce, tuv
Rooted from the former Dongguan C&G Wind Power Co., Ltd. We provide wind turbine from 150w to 20kw. MW series is the smallest ones. It's designed for the situation that with strict requirement of wind turbine dimension. The MW 200 with the rotor diameter less than 1m, and the MW 400 with the rotor diameter only 1.03m. Also you can install it easily with 48-51mm OD pipe. It's largely used in boat, small tree house or such situation. YW series is with a good apearance. It's widely used for government project, such as street light. It's usually be used together with solar panel to build the hybrid system. It's used in the 2008 Olympic games and also will be probably used in the coming 2010 world cup.
250w wind turbine MW series is the smallest ones. It's designed for the situation that with strict requirement of wind turbine dimension. The MW 200 with the rotor diameter less than 1m.
400w wind turbine YW series is with a good apearance. It's widely used for government project, such as street light. It's usually be used together with solar panel to build the hybrid system. It's used in the 2008 Olympic games and also will be probably used in the coming 2010 world cup.
1kw wind turbine YW series is with a good apearance. It's widely used for government project, such as street light. It's usually be used together with solar panel to build the hybrid system. It's used in the 2008 Olympic games and also will be probably used in the coming 2010 world cup.
Green energy---50kw wind turbine Model number: fd18-50kw Rotor diameter: 18m Number of blades: 3pcs Material of blade: frp Rated rotation speed (r/m): 80 Type of the generator: permanent-mangnet 3 phrase ac Rated power: 50kw Max power : 55kw Output voltage: 380v Cut-in wind velocity: 3.5(m/s) Rated wind velocity: 13(m/s) Working wind velocity: 3.5-25(m/s) Survival wind velocity: 50(m/s) Tower height: 18m Main body weight (exclude tower): 1000kg Tower type: 400s. Tube Output controlling system: electrified controller inverter Life span : 15years Warranty: 1year Can load Light, fan, charger, tv, pump, washer, refrigerator, electric cooker, air conditioner, village power supply Authentication: ce and iso certificate Net weightú¦4674.00kg Gross weightú¦4870.00kg Volume : 10.265stere packing numberú¦ 8pieces packing : veneer box
