Astm steel plate s45c 1.Specifications of astm steel plate Round bar Diameter(mm) Length (mm) 20~800 3000~5800 Plate Thickness(mm) Width (mm) Length (mm) Max:800 1600~2300 3000~5800 2.Chemical compositon(%) C Si Mn Cr Ni Cu S P 0.42~0.50 0.17~0.37 0.5~0.8 Â?¤0.25 Â?¤0.3 Â?¤0.25 Â?¤0.035 Â?¤0.035 3.Delivery condition and heat treatment Forging 1100~850* Normalization 840~880 Hardening 820~860 water Subcritical annealing 650~700* Isothermal annealing 820~860 600x1h* Tempering 550~660 4.Characteristic Nice machanical porpertys and worse hardenability, so, it is used for machine parts 5.Application of astm steel plate 1): can be used in many fields such as building, automobile, shipbuilding, Petrochemical, machinery, medicine, food, electric power, energy, space, building And decoration, etc. 2): can be made into mould template, mortise pin, column. 3): this kind of steel have good mechanical property, is widely used in structural parts Which may support stress alternation, especially made into some connecting Rods, bolts, wheel gear... 4): this kind of steel is the most common blanks and materials of shaft part.
12V energy storage battery modules 200AH lifepo battery Detailed parameters of 12V energy storage battery modules 200AH lifepo battery Cell model GLP200Ah-88*173*268 Capacity(0.5C) 200Ah rated voltage(V) 3.2V Typical Impedance (mΩ) â?¤1mW Battery material Lifepo4 battery Lithium ion phosphate battery pack Combination method 1P4S Minimal capacity(0.5C) 200Ah Nominal voltage 12V Max. charge voltage 14.6V Discharge cut-off voltage 9V-10V Max Charge current 100A Max Working current 200A Standard charge current 60A Standard discharge current 100A Pack Impedance standard â?¤25mW Weight (Approx.) â??26.5Kg Max. dimension(LÃ?WÃ?H)(mm) â?¤ 363*1175*283mm Operating temperature Charge temperature 0â??~45â?? Discharge temperature -20â??~55â?? BMS Single cell over-charge cut-off voltage 3.85V over-charge release voltage 3.65V Single cell under-discharge cut-off voltage 2.3V Discharge release voltage 2.5V Over-discharge cut-off current 400A Over-discharge cut-off current delay 1.5S Condition for the recovery of over-current and Short-circuit Charging remove Balance current / Balance Condition / Communication protocol / Packaging & Shipping: Packaging: Paper Packaging and Wooden Packaging for DG. Shipping:By Sea; By Air; EMS
12v 40ah lithium battery pack for solar street light system Product Description Detailed parameters of 12v 40ah lithium battery pack for solar street light system Cell model GLP20Ah-70170240 Capacity(0.5C) 20Ah rated voltage(V) 3.2V Typical Impedance (mΩ) â?¤2mW Battery material Lifepo4 battery Lithium ion phosphate battery pack Combination method 2P4S Minimal capacity(0.5C) 40Ah Nominal voltage 12V Max. charge voltage 14.6V Discharge cut-off voltage 9V-10V Max Charge current 20A Max Working current 40A Standard charge current 12A Standard discharge current 12A Pack Impedance standard â?¤35mW Weight (Approx.) â??3.2Kg Max. dimension(LÃ?WÃ?H)(mm) â?¤ 62*176*270 Operating temperature Charge temperature 0â??~45â?? Discharge temperature -20â??~55â?? FAQ (1). Whatâ??s kinds of battery will you provide? We have three type battery: Lithium ion battery,LiFePO4 storage battery,LiFePO4 electric vehicle battery.There are many different model battery here, we can supply 3.2V 3.5ah-400ah LiFePO4 battery, 3.7v 100mah-3.7V 300Ah battery, 12v 0.8Ah-12v 400Ah battery. (2). Your battery can meet CE RoHS requirements? Our battery are with the certificate of CE/RoHS. (3). Can we change the color based on the original? Yes, the color can be customer-made according to your requirement. (4). Can you print my picture or logo on the battery cover? Yes, OEM is available,we can print your picture or logo on the battery case, and you can offer your logo. (5). What kind of guarantee you give? Our battery products can be used for more than 3 years. For LiFePO4 battery our warranty time is 3years.If it has quality problem during the warranty time we will change new battery for you. Long time warranty also can be customized.
Features: â?? Adopts luminance separation and 3D DNR technology, high-resolution, better image â?? No delay, real-time transmit video up to 500M â?? Supports D1/960H, ISP and TX 2 in 1, compatible with analog Matrix/Distributor etc. â?? Built-in double IR-CUT filter, No color deviation â?? Adopts Long-life and SMART 6pieces Epistar IR Arrays, IR range up to 80meters â?? 1.7mm/F1.2 big Megapixel lens â?? Support BLC (backlight compensation), auto white balance, color reproduction and high, less noise, illumination lower, more stable performance â?? Adopts double glass, the image more clear and bright â?? 960p HD-AHD â?? Aluminum housing Specification: Model:DLX-FA13 Pixel 1280X960 Signal System PAL/NTSC Lens Fixed 1.7mm/F1.2 Megapixel lens Min. Illumination 0LUX(IR ON) IR 6pieces Epistar IR Arrays, IR range 80M BLC Auto AGC Auto Electronic shutter 1/50(1/60)s to 1/100,000s S/N >69dB Gamma correction >0.45 Video output 1.0Vp- p75Ω(BNC) Power DC12V ±10% Material Aluminum Operating Conditions -18 °C - 50 °C, Humidity 90% or less (non-condensing) Dimension 130x80mm Weight 300g
*Features of HDPE plain T-Shirt Bag/Plastic bag/Shopping bag/Grocery bag/Vest handle bag/Vest carrier bag 1). Material: HDPE( High Density Polyethylene). 2). Bag Type: T-Shirt Bag/Plastic bag/Shopping bag/Grocery bag/Vest handle bag/Vest carrier bag 3). Main Usage: goods packing for Supermarket or Retail store. 4). Size: ANY size is available. Usually the bag width is from 150MM to 500MM, the bag length is from 370MM to 610MM, and the normal thickness is from 8microns to 35microns (=0.008MM to 0.035MM). 5). Film color: ANY color is available, such as transparent, white, black, grey, red, orange, yellow, green, blue etc. 6). Printing: No Printing, or customized printing. 7). Packing: Loose packed Inner packing can be with or without outer plastic bag or rubber band. Outer packing is usually in plastic bag packing or Brown Corrugated Export Carton with Customized Printing. 8). Special Features: a. OEM order is available. b. Can add oxo-degradable additives like d2w to become a Oxo-biodegradable plastic bag. * Trade terms 1). Payment terms : Normally LC(Letter of credit) at sight, or 30% prepayment, balance before delivery or against COPY of BL. But this issue can be negotiable. 2). MOQ(Minimun Order Quantity) : Normally MOQ per each non-printed items should not be less 3 metric tons (This will go up to 7 metric tons for printed items), and total order quantity (with other items) should not be less than 1x20'FCL quantity. But this issue can be negotiable. 3). Delivery time : Normally 20-30 days after getting LC(Letter of credit) at sight or 30% prepayment. 4). Loading port : Normally Port of Jiangmen (which is near Macao), or Guangzhou port, Shenzhen port.
Automatic both-ends-wire cutting stripping stranding soldering machine Product features: 1. The machine is powerful, can double dip tin, single-end stranding and soldering, double ends stranding and soldering, ultra short wire stripping and soldering. 2. Wire feeding part in front-end of this machine adopts two sets of wire feeding wheels to make machine more stable control wire length while it's being produced 10 wires simultaneously, the rear part adopts cylinder braking mechanism for rear-end stripping. 3. The main part of the machine is the use of japanese sanyo stepper motor drive, panasonic plc control system, its operation is simple, accurate positioning, high accuracy, long service life, etc. Machine working video Machine working video Machine working video Technical parameters Model no. Fully automatic double-ends wire soldering machine bj-z803 Function Wire cutting, single/double-end stranding soldering Wire range Ul1007 22awg-32awg Speed 7000-18000 pcs/hour (decided by wire) Wire cutting length 8mm-9999mm Cutting accuracy +/-0.1mm Wire stripping length Front:10mm rear:10mm Stranding length Front:10mm rear:10mm Pressure capacity 0.5mpa-0.7mpa Blade material Import tungsten steel/high speed steel Power Ac220v
Automatic cut-to-length strip flat ribbon cable terminal crimping machine Product features: 1. Mainly is used for crimping communication terminals on ph, xh, eh, zh color flat ribbon cables, Terminal on scn, sm, vh, dupont ribbon cables. 2. Automatic production ensures the fixed length cutting, precise splitting stripping, balanced Crimping, making the wiring harness terminal crimping neat, good consistency and quality of The products is very stable. 3. The machine adopts imported servo motor drive, regardless of how much the quantity of Cable harness, terminal precise pressure control, to ensure that the wire harness, cable guide Positioning performance through more accurate truly achieve the effect of stability, precision, High speed, low noise. 4. Fully automated production, saving human labor: from feeding flat ribbon cable for fixed length Cutting, stripping and separating, crimp double (single) terminals, all the process is finished Automatically without manual participation. 5. High efficiency : the pressure of the 15k terminal per hour, the device can work 24hours. 6. Electric adjust blade, length, wire separated length, stripping length and etd, easy operation, stable, high efficient. Technical parameters Model Bj-p806 Function Fully automatic flat ribbon cable double ends crimping Processing wire range Awg26-awg18 6p-12p various flat ribbon cables Production capacity 2000-4000 wires per hour (decided by wire gauge) Cutting length 90mm-9999mm Cutting accuracy Mute hybrid stepping motor each step 0.1mm Stripping length 0.01-8mm Crimping force 19600n (2t) Detection function Detection for wire missing, terminal missing, crimping, air, voltage Power Ac 220v 50/60hz (single phase) Body size 1000x750x1500mm (excl. Projections) Body weight 550kg Cutting tool material Sweden asp60 powder high speed steel
Automatic cut-to-length thick wire stripping machine Product Feature: The machine adopts hybrid driven microcomputer LCD screen control system, in the processing range can be arbitrarily set the length of the cutting line, stripping length, has quantitative and timing start function. Specialized for thick wire or cable , especially for BV, BVR cable wire processing used in the automotive, power distribution box. 4 Wheels: Machine Working Video 6 Wheels: Machine Working Video 8 Wheels: Machine Working Video Technical Parameters Mode BJ-900 BJ-960 BJ-980 Function Wire Cut, Both-ends Strip, Intermediate Strip Wire Cut, Both-ends Strip Cutting wire core 0.1-25 mm2 (BV 16mm2, BVR 35mm2) 0.1-50 mm2 (BV 16mm2, BVR 35mm2) 0.1-50 mm2 (BV 25mm2, BVR 50mm2) Production Capacity 1000-4000 wires/hour(decided by wire type) Cutting Length 0.1mm-99999.9mm Intermediate strip no. 13 strips Stripping Length Strip front 0.1-50mm Strip rear 0.1-30mm Strip front 0.1-250mm Strip rear 0.1-120mm Strip front 0.1-250mm Strip rear 0.1-120mm Accuracy of inlet outlet motor Mute Hybrid Stepping Motor 0.1mm per step Remark Function Auto-outlet, Auto-inlet, Timing start Driving Mode 4 wheels 6 wheels 8 wheels Dimension 420X297x345MM 530X420x370MM 570X420x400MM Net weight 35KG 35KG 45KG Blade material Import tungsten steel/Highspeed steel
Main features and applications This machine is made to gain a beautiful linear seam on circumferential shape tank, rectangular shape tank, or butt welding two pieces of metal sheet Watch the video of the linear seam welding machine: Https://youtu.Be/s32daltsp4w Https://youtu.Be/3t_3ch_yu60 ? Automatic argon arc(plasma) straight seam welding machine mainly includes two parts: specially designed straight seam automatic machinery part and standard welding source part ? According to different welding requirement of various materials, the automatic straight seam machinery part can be designed into two kinds: plate type pressing mechanism and keyboard type copper pressing mechanism, to get the regular and stable clamping and cooling effect. ? Standard welding source part includes tig(tungsten inert gas shielded arc welding), mig(metal inert gas shielded arc welding) mag(metal active gas arc welding) saw(submerged arc welding)paw(plasma arc welding), etc, automatic machinery part can be equipped by the standard welding source manufactured by our company , can also work with other well-known brands of welding power ? Automatic machinery part is adopted plc control, dc motor drive has variable welding speed and interfaces with any power source. ? Weld seam back up design has a groove to form a weld on the bottom of a welded plate and provide consistent gas flow to the back of the weld, to assure the stable gas shield and ensure double-side forming in single side welding. ? Automatic straight seam welding machine is mainly used for the high quality and low distortion automatic straight welding, such as metallic cylinders and aligned plates made with stainless steel, iron, aluminium and brass, etc. ? Compared with the traditional manual welding way , high welding efficiency and speed, well welding quality and good consistency
Zg-d6mwh2-c security display holders for mobile phones With alarm function, this zg-d6mwh2-c is mainly designed for retail security displays of live merchandises such as mobile phones, mp3/mp4, pda, gps, and etc.. Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises. Technical parameters: 1) with alarm function 2) stand height: 5.5cm (standard) or customize 3) aluminous stand, remote control, double protection, with adjustable top holder, use for mobile display, can charge for mobile phone. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately. 4) without retractor (pull box) inside the stand. 5) inbuilt battery type: 3.6v/er14250 6) exterior power adapter: dc-6v 7) maximum battery standby: 1 year 8) alarm volume: 85-105db 9) alarm indication: red led light twinkling 10) tamper indication: green led light twinkling 11) low battery indication: red led twinkling with a "beep" given 12) turn on / off alarm: sound & light indication 13) alarm switch: remote control . 14) adhesive base: t-shaped metal mounting base. (if required, please make statement before ordering) 15) shell material: abs & aluminous stand. 36 sets per carton.
Zg-d6a1-w secure merchandise displays With alarm function, this zg-d6a1-w is mainly designed for high-theft solutions of open merchandises such as mobile, mp3/mp4, pda, gps, and etc.. Secure & neat displays of these merchandises, interactions between consumers and merchandises are also realized with this product. And thus better promote sales of open merchandises. Technical parameters: 1) with alarm function 2) 13cm (standard) or customize 3) abs stand, use for mobile, mp3/mp4, pda, gps, and etc.. When the exhibit is separate from the sensor, or the sensor is separate from the stand, or the sensor is cut, or the stand is separate from the table, it will alarm immediately. 4) retractor (pull box) inside the stand 5) inbuilt battery type: 3.6v/er14250 6) exterior power adapter: dc-6v 7) maximum battery standby: 1 year 8) alarm volume: 85-105db 9) alarm indication: red led light twinkling 10) tamper indication: green led light twinkling 11) low battery indication: red led twinkling with a "beep" given 12) turn on / off alarm: sound & light indication 13) alarm switch: key (standard) (if remote control is required, please make statement before ordering. Thus we can pre-design it for you!) 14) adhesive base: t-shaped metal mounting base. (if required, please make statement before ordering) 15) shell material: abs stand. 36 sets per carton.
Sargassum seaweed is a type of seaweed found along the coasts of Japan and China. Two species, Sargassum fusiforme and Sargassum pallidum, are both referred to as sargassum seaweed or gulfweed in English and hai zao in Chinese. Sargassum seaweed is a brown algae with leafy segments supported at the surface of the ocean by air bladders. Many species of sargassum are found worldwide. In fact, the Sargasso Sea, an area of the Caribbean near the West Indies, is named for its large floating masses of sargassum seaweed. However, sargassum used in healing is usually of Asian origin. General Use Sargassum seaweed, or Hai zao, has been used in traditional Chinese medicine (TCM) since at least the eighth century A.D. In TCM it is characterized as having a cold nature and a salty, bitter taste. The primary use of sargassum seaweed is to treat goiters. The thyroid needs iodine to produce a critical hormone, thyroxin, that regulates body metabolism. The primary natural sources of dietary iodine are sea salt, fish, and vegetables that live in the ocean. Using sargassum seaweed as a source of iodine to treat goiters is a scientifically sound practice. In TCM, sargassum seaweed is also used to treat such other thyroid disorders as Hashimoto’s disease. It is also used to treat pain from hernia and swollen testes. Sargassum seaweed is found in many common Chinese formulas. In combination with silkworm, prunella, and scrophularia, it is used to treat scrofuloderma. When sargassum seaweed is combined with water chestnut, it is used to treat silicosis, a lung disease. Sometimes modern herbalists use sargassum seaweed to promote weight loss because it encourages the body to discharge water through the urine. In China and Japan, fresh sargassum seaweed is sometimes stir-fried and eaten as a vegetable. Sargassum also can be used for base material of alginat powder or natural fertilizer.
Riou industrial brine chiller mainly consists of compressor, control panel, condenser and evaporator. You can choose the type and brand of these components yourself. Or we may help you according to your needs. 1. Compressor Riou uses the famous compressor, like bizer, copeland, danfoss, sanyo, taiwan hanbell and taiwan fu sheng, to ensure the quality. Riou believes that diversified choices can meet most of the clients' needs. 2. Control panel Normally, scroll chiller is equipped key control panel with led display and screw chiller is controlled by touch screen (human-machine interface). You can choose punp (usual), siemens or mitsubishi brand. According to your needs, the chiller can be long-range controlled. 4. Condenser Riou industrial brine chiller normally adopts shell and tube type condenser. The refrigerant will be cooled down here by the water cooling tower. That’s the reason why water cooled chiller need water cooling tower. As the water cooled chiller doesn’t need fan, it’ll not influence the surrounding temperature. Besides, the surrounding temperature impact on the water cooled chiller is small. 5. Evaporator For the brine chiller, you can choose “ti coil tube” or “heat exchanger” type. Which are both anti-corrosive. 6. Water pump For brine chiller, it needs stainless steel pump. 7. Water tank The chiller usually is equipped a water tank inside. Besides, riou can provide different capacity of water tanks inside or outside the chiller for clients to keep the liquid temperature in the water tank. The material of water tank is 304# stainless steel in usual. 8. Others Danfoss electromagnetic valve, emerson filter, lg contactor and lg thermal relay.
anti-corrosion resistant non-toxic practical round plastic ring seal Product Description We are a company specialising in customized products, and there are various types of Good anti-corrosion resistant non-toxic practical round plastic ring seal we can make ,and more information about them are as following: Product feature High temperature resistance. Self lubrication. Wear resistance. Flame retardant properties. Product Specification Material nylon ,mc nylon, POM,ABS,PU,PP,PE,PTFE,UHMWPE,HDPE,LDPE, PVC,etc. Color Black,white,red,green or any color according to Pantone colors Size As per customer's request Processing Technic CNC machining,injection molding & extrusion Hardness Shore D Working temperature —60~350? Tolerance ±0.05mm Density 0.9-2.5g/cm³ MOQ 1 pc Service OEM or ODM Production basis Samples or drawings Certification ROHS,FDA,ISO9001:2000 Conductivity Conductive or insulative Working life 1-30 years Lead time 7-10 days after receiving the payment Samples 1-2 pcs of free samples are available Application 1.transmission system in areas of industrial equipment 2.medical device,automotive,office equipment,household 3.appliances,digital electronic,toy etc. Lead Time 3-7 days for samples 3- 15 days for lot production
Talc is a metamorphic mineral resulting from the metamorphism of magnesian minerals. -Talc have several kinds 1- steatite which is pure talc, it refers to high-purity, dense, very fine-grained talc that can be machined. On firing, it has good electrical insulating properties and is used in the manufacture of electrical porcelain. 2-foliated talc use in several industry 3- tremolite talc This is fine-grained “hard” talc, which have magnesium concentration about 10 %, and traces of carbonates and quartz. Uses: Talc enter in several industry around the world like 1- painting 2- insecticides: as a carrier 3- tanning leather 4- soap 5- filler: in carpet and textile backings, wallboard joint compounds, adhesives and sealants 6- ceramic and pottery: Talc for ceramic applications is low in iron and carbonates, uniform in chemical composition and fired shrinkage, hard and fine grained, controlled in particle size distribution, 7-plastics: Talc is used in thermoplastics to control melt flow, reduce creep in molded parts, increase molding cycles, increase heat deflection temperature, and improve dimensional stability. 8- paper: Its low abrasion and ability to preferentially wet oily materials in the presence of water are unique among mineral alternatives, talc is used for TiO2 extension and for improved gloss, opacity, brightness, and ink holdout. 9- pharmacological cosmetics and talc powder: Only high-brightness platy talc of exceptional purity is used in cosmetics and pharmaceuticals. 10-printing ink 11- electric isolation 12- Talc is used for flow control in animal feeds, as a dusting agent for rubber, as an anticaking agent for fertilizers 13- Coatings The principal use for talc in coatings is as a TiO2 extender.
Why We are different: • Direct Trampoline Factory • Full testing certificates ( CE, TUV-GS) • 9 Years of super market experience More Trampoline information? 1.Trampoline Material--Steel + EPE + PVC+PE 2.Trampoline parts-- Ladder + Rain cover+Tent+Basketball hoop 3.FrameTube---Steel tubes galvanized both inside and outside 4.Spring Cover Pads ---Water proof, UV resistant and fade resistant (1.pad for safety 2.High density and thicker EPE foam.with buffer function.3.Cover is PVC.UV resistance.Longer using life outside.) 5.Springs---Biconical Spring ,galvanized. This ensures the springs are protected against weathering and prevents the formation of rust. 6.Jumping Mats---Black heavy duty matt.PP Mat from USA, UV-resistant, heavy-duty and durable.UV protect long-lasting use of trampoline for years to come. 7. Pads---Middle EPE foams, to protect the springs and be safety 8.Target User--Suitable for kids and adults 9. Max User Weight---150kgs 10.Usage---Put in gardens,amusement park,school,fitness centers and so on. 11.Assembling--Easy to assemble,please follow the assembling pictures below. 12.Certification--- TUV/ GS, CE 13.PAH Test--- Yes 14.OEM orders--- Accepted,customized color,size and others 15.Packing--- Trampolines with safety net packing; Unified carton packaging
Gym rubber flooring Rubber flooring is playing a very important role in sports events and gym, it shows the quality of the gym. Epdm rubber is one of the most popular gym flooring materials as it is relatively inexpensive and extremely durable. Strong enough to support heavy weight crush, such as barbells and dumbbells.And most important, our rubber gym flooring is made from no smell, non-toxic recycled rubber, making it an excellent choice of flooring option. More details of the rubber: Thickness could be 15-50mm. Use top quality epdm granules and with high density, the rubber is super tough. Easy installation, smooth surface, easy cleaning with water. Multiple color options, let your gym fashion and extraordinary. Qingdao jianli rubber & plastic products co., ltd. Is a research, production and construction as one of professional rubber manufacturing company. The company has over 10 years of experience in the production.The rubber products are on behalf of the advanced level, and provides many well-known professional fitness club ground services, were loved by the customers. The products processed with high-density rubber surface layer with rubber granules, have features of nontoxic, flexible, wear-resistant, durable, heat insulation, sound insulation, fire-retardant, environmentally friendly, easy to clean, not easy to broke, can bear high temperature, not easily deformed, elegant appearance, etc. Can be customized with a variety of colors.Funtion as weight area in the gym and private education room. Faq 1 what is order delivery time? As soon as possible.Within 5-7 working days 2 can you send sample to me? We can provide you free sample, after you place an order, we will refund the sample shipping fee to you asap. 3 what is your moq? Usually our moq is 200 square meter. 4 how can i pay the payments? You can pay us by t/t , western union or alibaba. 5 how about your after-sale services? Any inquiry will be replied in 24 hours. Timely and professional service all the time
2.5l hot sale tpu water bag water bladder with high quality Colour Army green(white , gray black , blue etc. Also available) Capacity 2.0litre (1 l, 1.5l, 2 l, 3l, also available) Material Food-grade tpu Size 39*17cm Weigt 200g Film thickess 0.3mm(can be customizd from 0.3mm to 0.6mm) Tube length 100cm Certificate Sgs Hose cover Based on customer's request Cleaning kit Negotiable Pakaging Polybag for each piece 80pcs/ctn Sample lead time 1-3 days Order lead time 10-15days Tpu film have simple molecular structure ( including only c.H.O.N ), tpu doesn't pollute the air while burning and incinerating and will be degraded naturally within 3~5 years under the action of humidity and microorganism after being buried in soil, so it is a good substitute of pvc products and a main-stream product for environmental production. - highly elastic, wear-resistant, - anti-yellowing, weather-proof, oil-resistant, acid-proof, warping-resistant, - anti-fungus, antibiosis, anti-static, recyclable and degradable - safe and durable even in severe environment - environment friendly - good hydrolysis resistance and weather fastness. - no affected by oil, chlorine, sweat, cosmetic and seawater - smooth surface is advantageous to screen printing - no losing elasticity in cold or hot environment - smoothly rounded edge keep your skin from irritation Width : 20-1700 mm Thickness : 0.012-2.0 mm Color : Foggy , clear , any color can be customized Hardness : 80a , 85a , 90a , 95a Anti-uv grade : Grade 4 Melt point : 135-175 ? Gravity : (g/cm3)
Plastic film making machine Diameter range for rotary cutting: max diameter 900mm min diameter 105mm Thickness range of rod for rotary cutting : 0.2-7mm Power of main motor :37kw Total power of machine : 42.2kw Specification of blade : l 2100mm*w 80mm* t 13mm Outside size of machine : l 6945 * w 2500 * h 1600. Description of plastic film making extruder Ptfe teflon film has made extensive investments in the latest skiving technologies, enabling us to provide customers with high quality, competitively priced products. For its excellent dielectric capability, anti-aging and anti-corrosion property, super thin ptfe teflon skived tape&film has been used in a wide range of industries including the electronics and semi density industries.Furthermore, it is classified into oriented film, semi-oriented film and non-oriented film. Superthin ptfe teflon skived tape&film is available in a wide range of widths, thickness and colors.Especially, senrong’s new investment in a high precision film skiving machine will make the production of ultra thin film or sheet possible, and can Consistently achieve the tightest tolerance of ±.05 mils so that we can meet these exacting demands from customers worldwide. Features of plastic film making machine 1.Anti-voltage intensity 2.High breakdown voltage 3.Wide operation temperatures 4.Chemical resisting 5.High working temperatures 6.Low friction 7.Surface protect material
Features of ptfe corrugated pipe 1.To absorb effectively vibration, noise, thermal expansion from pipeline system; 2.To resolve minor deviation because of piping connecting and eliminate the Pipeline residual stress; 3.Applied to repeated motion in high temperature areas, good anti-fatigue performance; 4.Good flexibility, resistant to high temperature, resistant to corrosion. 5.Applied in the fields of petroleum, chemical industry, aerospace, metallurgy, electricity, Gas, building, mechanical, construction, iron and steel, paper making, fabric, medicine, Food and vessels ect. Specifications of ptfe ptfe corrugated pipe 1.Trustworthy quality 2.Low minimum order quantity with competitive prices. 3.Good after sale services. 4.100% virgin ptfe resin and recycled materials available 5.Our ptfe tube comes with flat and tidy surface without defects or crevices. 6.We can also produce according to drawings provided by customers. Teflon ptfe corrugated pipe characteristics One key important advantage of teflon corrugated tube is its operating temperature Range, it can easily out perform other engineering plastics by being able to perform Continuously at -250°c, right up to an amazing 250°c. Another important advantage Of ptfe is its outstanding co-efficient of friction, teflon corrugated tube is in the Record books as having one of the lowest friction values known to man. Teflon corrugated tube also has excellent acid and chemical resistance. Another feature Of teflon corrugated tube is its ability to set by or due to compression. Teflon corrugated tube has excellent electrical resistance. Teflon corrugated tube is also Water repellent and is often used in the manufacture of modern high performing, Water repellent and breathable clothing.
