Water Treatment Chemicals Suppliers and Manufacturers

Properties:MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300f¦). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields. Specification: items: Water treatment agent Accessory detergent Appearance; Clear brown liquid amber transparent liquid Solid content %: 48 min& 50 min Free monomer (MA) %: 9.0 max& 5.0 max Density (20f¦)g/cm3: 1.18 min& 1.18min pH(1% solution): 2.0~3.0 &2.0f+1.0 Usage: MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments. Normally In 250kg net Plastic Drum, IBC drum can also be used as required

Properties: AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index. Specification: items& index Appearance: Colorless or light yellow viscous liquid Solid content %: 40 min Free monomer (as AA)%: 0.8 max Density (20f¦)g/cm3: 1.15 min pH(1% solution): 3.5-4.5 Viscosity mpa.s: 90-200 Usage: AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5. AA/AMPS can also be used as dyeing auxiliaries for textile. Normally In 250kg net Plastic Drum, IBC drum can also be used as required

Properties: T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225can be used under high pH situation and has good compatibility with other organophosphines and BTA, T-225 can effectively withhold sediments of zinc salt and calcium phosphate, it has good scale inhibition and dispersion properties under high temperature and alkaline situations. Specification: items index Neutro Acid Appearance Colorless to light yellow viscous liquid Solid content % 30.0 min 30.0 min Free monomer (as AA )% 0.5 max 0.5 max pH(1% solution) 7.5f+1.0 2.5f+0.5 Limiting viscosity number (30f¦) dl/g 0.060~0.095 Density (20f¦)g/cm3 1.10 min 40%, 50% PAA are also supplied. Usage: T-225 can be used in circulating cool water system in situation of alkaline and excess of phosphate. It can be used as scale inhibitor and dispersant for heater, none-column evaporator boiler, circulating cool water and oilfield dirty refilling water with high calcium content. The dosage of 10~30mg/L is preferred. It can be built with organophosphines to form full organic alkaline formula. Normally In 200kg net Plastic Drum, IBC drum can also be used as required

Zinc chloride

Papemp Itemsindex Appearancecolorless or light yellow transparent liquid Active component (pbtc) 50.0 Phosphorous acidas po33-% _0.8 Phosphoric acid (as po43-)% _0.5 Density 20¦g/cm3 1.27 Ph value1 water solution 1.5~2.0 250kg in plastic barrel. Storage for one year in room shady and dry place.

Ii. Items, index Appearance, clear, colorless to ale yellow aqueous solution Active content (hedp)%, 58.0-62.0 Phosphorous acid (as po33-)%, 2.0 max Phosphoric acid (aspo43- )%, 0.8 max Chloride (as cl-) ppm, 100.0 max Ph (1% solution), 2.0 max Density (20¡æ)g/cm3, 1.43-1.47 Fe, mg/l, 10.0 max Colour apha (hazen), 30.0 max Acetic acid %, 0.5 max Ca sequestration (mg caco3/g), 500.0 min

Properties of ATMP: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification of ATMP: Appearance colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95min Chloride (as Cl-)% 2.0(or1.0) min 1.0 min pH value (1%solution) 2.0 max 2.0 max Fe (as Fe3+) (ppm) 20 20 Density (20C)g/cm3 1.33 min - Colour APHA (Hazen) 40 max - Package and Storage of ATMP: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.

Chlorine contents-35-36% Stability-1/20 Moisture-0.10 Particle size-100 through 1.7mm sieve 25kgs hdpe bags 45kgs hdpe drums 50kgs ms drums

Water based anti mold agent, safety shoes.

1.White granule/powder 2.Molecular weight:8-20million 3.Solid content:90% min 25kg/bag

Liaocheng yongxing environmental protection science and technology co., ltd. Is a super manufacturer specialized in water treatment chemicals anionic, cationic, nonionic, zwitterion polyacrylamide (pam) and polyaluminium chloride (pac) & oil displacement agent for over 10 years. 25kg kraft bag or bulk packing.

English name: polyaluminium chloride(poly aluminium chloride), short for pac Flocculant /coagulant synonyms: pac; aluminum chlorohydrate; aluminum chlorhydroxide; aluminum chloride, basic; aluminum hydroxychloride; poly aluminum chloride; polyaluminum chloride Cas no.: 1327-41-9 Molecular formula: [al2(oh)ncl6-n]m Technical standard: gb15892-2003 Pac-01(white powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 29-30; bacisity, 40-60; water insoluble, less than 0.3%: Pac-02(light yellow powder, spary drier type): for drinking water treatment or wastewater treatment.Specifications: al2o3, %, 29-32; bacisity, 70-85; water insoluble, less than 0.5%: Pac-03(yellow powder, drum drier type): for drinking water treatment or industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 29-30; bacisity, 80-95; water insoluble, less than 1.5%. (new product)pac-s(yellowish powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 30; bacisity, 60-80; water insoluble, less than 0.2%:(water solution: totally transparent) Pac-04(yellow brown powder, drum drier type): for industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 25-28; bacisity, 85-110; water insoluble, less than 1.5%: 25kg/bag 1*20gp=20mt without pallet

Poly aluminium chloride(PAC) Water treatment chemicals 25kg/bag (net weight)

Water treatment 25kgs

Hydrolyzed polymaleic anhydride (hpma) Cas no.: 26099-09-2 Structural formula: Properties: Hpma is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330íµ. Hpma has obvious threshold effect under high temperature (350íµ) and high phú¿8.3ú¬level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300íµ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement. Specification: Items Index Appearance Clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Phú¿1úÑ solutionú¬ 2.0-3.0 Density ú¿20íµú¬g/cm3 1.18 min Usage: Hpma is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place. Safety protection: Acidity, avoid contact with eye and skin, once contacted, flush with water. 250kg net plastic drum

Water treatment Water disinfection units. Variety of multi-purpose high-class water purification units for the cleaning and disinfection of raw water. The equipment does not require chemical additives, just a little salt and electricity. The highly reliable units efficiently and ecologically produce superior quality drinking water in conformity with the german drinking water directives.

Sodium Bisulfite- Industrial/Technical Grade Sodium bisulfite is a fine crystallized sodium grain that releases sulfur gas when dissolved in liquid. Manufacturers use sodium bisulfite in foods, cleaning products and pharmaceutical research. Common uses for sodium bisulfite include food preservation and cleansing to sanitize equipment and kill mold, bacteria and germs. Additionally, metal workers use sodium bisulfite to finish metals. Industrial/Technical Grade Sodium Bisulfite is widely used in various industries. 1. Leather Industry: Sodium bisulfite is used as leather processing chemical to make finished leather products softer, wearable, waterproof and longer lasting. 2. Water Treatment: Sodium Bisulfite plays an important part in the treatment of water, wastewater and waste as a strong reducing agent. The chemical removal of dissolved oxygen by chemically treating with sodium bisulfite reduces the corrosion rate in steel material. Sodium bisulfite also assists in the dechlorination of drinking water as well as in the chlorine removal in waste waters. Another treatment method that utilizes sodium bisulfite's effectiveness is in the reduction of chromium. All three reactions allow for chemical removal to be controlled by the amount of sodium bisulfite that is reacted with the solution. 3. Medicine Industry: The medicine industry uses Sodium Bisulfite for manufacturing semifinished product of metamizole sodium and aminopyrine. 4. Rubber Industry: Sodium Bisulfite is used in Rubber Industry as coagulative agent. 5. Textiles Industry: Sodium bisulfite is an important component in the preparation of dye intermediates. There are also areas of substantial utilization in the processing of wool as well as for the antichlor treatment required of many textile products. 6. Chemical Industry: Sodium bisulfite is a common reducing agent in the chemical industries. In biochemical engineering applications, it is helpful to maintain anaerobic conditions within a reactor. 7. Photography Industry: Sodium bisulfite serves as dual purpose in photographic industry. It is responsible for preserving the thiosulfite in the fixing baths and scavenging the dissolved oxygen in the developer solution. 8. Water Pipes: Sodium bisulfite is also used in the process of purifying water, cleaning water pipes and reverse osmosis membranes in desalinization equipment as it is an antibacterial. It is usually added to large piping systems to prevent oxidative corrosion. Food Grade Food Grade sodium bisulfite is used to preserve and extend the shelf life of manufactured food items. As an additive, the food processing chemical helps to prevent the oxidation of fresh-cut produce. It is used to preserve color and inhibit bacterial growth on fruits, vegetables, some seafood and wine. Sodium bisulfite can preserve many of the qualities of fruits and vegetables, including the color, taste and nutritional value. It is a common ingredient used in the canning process; the sodium bisulfite protects the fruits and vegetables from oxidizing and changing color. Sodium bisulfite is used in beverages, fillings, sauces, dressings. Soft drink manufacturers use the pH-lowering properties of sodium bisulfite to reduce the tartness of many beverages. It is also present in wines and beers, as it is used as both a sterilizer and an antioxidant in the process of brewing beer or fermenting wine. Sodium bisulfite acts as bleacher (Sweet, pastry, water-soaked bamboo slices, etc.) loosening agent (bread, biscuit, etc.) corrosion resistance antiseptic (fruit juice, can, brewing, grain storage, etc.); antioxygen antistaling agent (acupuncture needle sprout, sea food, garden stuff, etc.) 50 KG BAGS with liner

Aluminium sulphate Aprearance: white Fom : slab Al2(so4)3 = (56.5 to 57.5%) Al2 o 3 : (16.5 to 17.5%) Fe2o3 : max 0.007% Inssoluble materials (t.S.S) : : max 0.05% As required by the customer

Polyacrylic Acid Sodium (PAAS) CAS 9003-04-7 Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. Package and Storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.