1.Light yellow granule/powder 2.Solid content30% 3.25kg/bag 25kg/bag
Properties: ATMP has an excellent chelation, a low threshold inhibition and a lattice distortion ability. It functions to prevent scale formation, calcium carbonate in particular, in water system. It has a good chemical stability and is hard to be hydrolyzed in water system. At high concentration. It has a good corrosion inhibition. It is used in industrial circulating cool water system of thermal power plant and oil refinery plant. Atmp can decrease scale formation and inhibit corrosion of metal equipment and pipeline. It can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of atmp is crystal powder, soluble in water, easily dissolvable, suitable for usage in winter and freezing districts. Due to its high purity. It can be used in woven & dyeing industries and as metal surface treatment agent. Package and storage: Liquid: normally in 200l plastic drum, IBC (1000l) can also be used as required Solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by customers. Storage for 10 months in a cool and dry place.
Properties: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95 min Chloride (as Cl-)% 2.0(or1.0) min 1.0 min pH value (1% solution) 2.0 max 2.0 max Fe (as Fe3+) (ppm) 20 20 Density (20¡æ) g/cm3 1.33 min Colour APHA (Hazen) 40 max Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. Package and Storage: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.
The product has the features including wide applicable range of PH value, large granule, and quick speed in sedimentation. It is widely applied for treating the domestic drinking water, domestic sewage and industrial waste water. 25KG/PP woven bag with a PE layer inside, 18MT/20'FCL.
Cationic polyacrylamide APAM Cationic PAM, copolymerized by cationic monomer and acrylamide monomer, is a water ¡§Csoluble and linear organic polymer with high molecular weight. Application: As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, to clarification, concentrate and sludge dewatering processes. The main applications: 1). Industry wastewater treatment: urban sewage treatment, food processing, petrochemical, metallurgical, miner dressing, dyeing, sugar. 2). Papermaking: dry strength agents, retention agents and filter aids, which can be greatly improved paper quality, save cost and improve the production capacity. 3). Oil field: anti-clayswelling, acidifing densifier. Use Method: Being used, PAM should be dissolved in solution of 0.1-0.2%, If not use the matching dissolved equipment and dosing system, a solution should be put in the diluted cans. Practice on machine via screw pump and adjust the amount according to the actual.
CAS: 6419-19-8 Molecular Formula: N(CH2PO3H2)3C Molecular weight: 299.05 1, Properties and usage ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. in water system ,it can prevent scale formation, particularly for calcium carbonate. in water, ATMP has good chemical stability and is hard to be hydrolyzed. At high concentration, it has good corrosion inhibition. ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield.. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, easily soluble in water, easy moisture absorption, particularly suitable for using in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. 2, Specification: ITEMS Index Appearance Colorless or light yellow transparent liquid Whitecrystal powder Active content (asATMP) % ¡Ý 50.0 50.0 92.0 Phosphorous acid (as PO33- )% 5.0 3.5 -- Phosphoric acid (as PO43- )% 1.0 0.8 0.8 pH (1% Water Solution) 1.5-2.5 1.5-2.5 ¡Ü2.0 Chloride (as CL- )% 3.5 2.0 2.0 Fe(as Fe3+) ppm ¡Ü -- 20.0 20.0 Density (20oC) g/cm3¡Ý 1.28 1.30. 3, Application range&using method:ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, The recommended dosage is 20-80mg/L. 4,Safety Protection:ATMP is Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
CAS :2809-21-4 Molecular Formula:C2H8O7P2 Molecular weight: 206.02 1, Properties HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn etc. metal ions and form stable complex compound. It can dissolve the oxidized materials on these metals'surfaces. Under250OC HEDP shows excellent scale and corrosion inhibition ability. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid of HEDP is high purity product, suitable for using in winter and freezing districts. it is quite suitable for using as cleaning agent in electronic fields and as additives in daily chemicals. 2, Specification: ITEMS Index Appearance Colorless or light yellow transparent liquid White crystal powder Active content (as HEDP) % ¡Ý 50.060.0 89.0 Phosphorous acid (as PO33-)%¡Ü 2.02.0 0.80 Phosphoric acid(asPO43- )% ¡Ü 0.80.8 0.50 Chloride (as Cl-)% ¡Ü 1.01.0 0.10 pH (1% solution) ¡Ü 22 2.0 Density(20OC)g/cm3 ¡Ý 1.341.40 ¡ª¡ª Fe ion ppm ¡Ü 10 10 5.0. 3,HEDP Application range&using method HEDP is widely used in the in circulating cool water system of electric power, chemical industry, metallurgy, fertilizer, etc. and widely used as a scale and corrosion inhibitor of low-pressure boilers, field waterflood, oil pipeline. In light&textile industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. 4,Safety Protection:HEDP is Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
CAS No.2809-21-4 Dequest:2010 Molecular Formula:C2H8O7P2 Molecular weight: 206.02 Properties: HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metals'surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250 centigrade degrees. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. Specification: Appearance:Colorless or light yellow transparent liquid;White crystal powder Active contentú¿HEDPú¬%:58.0-62.0;89.0 min Phosphorous acidú¿as PO33-ú¬%:2.0 max;0.5 max Phosphoric acid ú¿asPO43- ú¬%:0.8 max;0.5 max Chloride (as Cl-)%:0.01 max;0.01 max pHú¿1% solutionú¬:2 max;2 max Density ú¿20 centigrade degreesú¬g/cm3:1.40; Fe ion ppm:10 max;20 max Colour APHA (Hazen):40 max; Usage: HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage: HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
CAS No:15827-60-8 Dequest: 2060 Molecular Formula:C9H28O15N3P5 Molecular weight: 573.2 Properties: DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210 centigrade degrees) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: AppearancE:Brown transparent liquid Active acid %:48.0-52.0 Phosphorous acid(as PO33-)%:3.0 max Chloride (as Cl-)%:12-17 Density(20 centigrade degrees)g/cm3:1.35-1.45 pH(1% solution):2.0 Fe ppm:35 max Usage: DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelements carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.íí Keywords: DTPMPA,DTPMPA China,Diethylene Triamine Penta (Methylene Phosphonic Acid) Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
English name: polyaluminium chloride(poly aluminium chloride), short for pac Flocculant /coagulant synonyms: pac; aluminum chlorohydrate; aluminum chlorhydroxide; aluminum chloride, basic; aluminum hydroxychloride; poly aluminum chloride; polyaluminum chloride Cas no.: 1327-41-9 Molecular formula: [al2(oh)ncl6-n]m Technical standard: gb15892-2003 Pac-01(white powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 29-30; bacisity, 40-60; water insoluble, less than 0.3%: Pac-02(light yellow powder, spary drier type): for drinking water treatment or wastewater treatment.Specifications: al2o3, %, 29-32; bacisity, 70-85; water insoluble, less than 0.5%: Pac-03(yellow powder, drum drier type): for drinking water treatment or industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 29-30; bacisity, 80-95; water insoluble, less than 1.5%. (new product)pac-s(yellowish powder, spary drier type): for drinking water, paper-making, medicament, cosmetics auxiliaries, etc.Specifications: al2o3, %, 30; bacisity, 60-80; water insoluble, less than 0.2%:(water solution: totally transparent) Pac-04(yellow brown powder, drum drier type): for industrial wastewater and municipal wastewater treatment.Specifications: al2o3, %, 25-28; bacisity, 85-110; water insoluble, less than 1.5%: 25kg/bag 1*20gp=20mt without pallet
Molecular formulaú¦c3cl2n3o3na Molecular weight: 219.95 Physical and chemical propertyú¦at present is a kind of which internationally promotes highly effective, low poison, fast sterilization disinfectant. Can effective fast eliminate each kind of bacterium, the fungus, the gemma, the mold, the cholera orphaned fungus, is one greatly strengthened disinfectant, the oxidant and the chlorizating agent. Appearance: white pewder or granular. Usage:as a kind of disinfectant, it can sterilize drinking water, swimming pool, tableware and air, fight against infectious diseases as routine disinfections, preventive disinfections and environ-mental sterilization in different places, act as disinfectant in raising silkworm, livestock, poultry and fish, and also can be used to prevent wool from shrinkage, bleach the textile and clean the industrial circulating water. The product has high efficiency and constant performance and has no harm to human beings. It enjoys good reputation both at home and abroad. Index first second Effective cl í²56% í²60% Ph(1%solution) 5.5-7.0 5.5-7.0 Water(h2o) 5-10% ín3% Packing: in plastic drum, cardboard 25kg or 50kg, plastic knitting bag 1000kg (or decided by customer).
Our flocculants(polyacrylamide) in type as under: Nonionic : 0~10% ionic Anionic: 10 ~ 100 ionic Cationic : 5 ~ 100 ionic Amphoteric 15kg or 25kg paper bags
Polyacrylic acid sodium (paas) Properties: Paas is innoxious and soluble in water, paas can be used in situations of alkaline and high concentration without scale sediment. Paas can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paas is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Items index Appearance colorless or light yellow transparent liquid Solid content % 30 min Free monomer (ch2=ch-cooh) % 0.5 max Density (20f+)g/cm3 1.15 min Ph(1% solution) 6.0~8.0 Notes: solid content 40%, 45% and 50% are also available Usage: Paas can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/l is preferred. When used as dispersant, the dosage should be determined by experiment. Package and storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place. Keywords: paas Related products: polyacrylic acid sodium (paas) Polyacrylic acid (paa) Copolymer of phosphono and carboxylic acid(pca) 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
Polyacrylic acid (paa) Cas 9003-01-4 Properties of paa: Paa is innoxious and soluble in water, paa can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification of paa: Appearancecolorless or light yellow transparent liquid Solid content %30 min Free monomer (ch2=ch-cooh) %0.5 max Density (20c)g/cm31.09 min Ph(1% solution)3.0 max 40%, 50% paa are also supplied. Usage of paa: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Package and storage of paa: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place. Keywords: paa Related products: polyacrylic acid (paa) Polyacrylic acid sodium (paas) Polyhydric alcohol phosphate ester (pape) Paa, paas, pape, polyacrylic acid, polyacrylic acid sodium, polyhydric alcohol phosphate ester Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
Cas 26099-09-2 dequest p9000 Properties: Hydrolyzed polymaleic anhydride (hpma) is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330¬. Hpma has obvious threshold effect under high temperature (350¬) and high ph(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300¬ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement. Specification: Items index Appearance clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Ph(1% solution) 2.0-3.0 Density (20¬)g/cm3 1.18 min Usage: Hydrolyzed polymaleic anhydride (hpma) is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package : Normally in 250kg net plastic drum, ibc drum can also be used as required.
Cas 9003-01-4 Properties: Polyacrylic acid (paa) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Items index Appearance colorless or light yellow transparent liquid Solid content % 30 min Free monomer (ch2=ch-cooh) % 0.5 max Density (20¦)g/cm3 1.09 min Ph(1% solution) 3.0 max 40%, 50% paa are also supplied. Usage: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Normally in 200kg net plastic drum, ibc drum can also be used as required.
Product Name:Poly(carboxylic acid) Identification Molecular Formula:(C3H4O2.H3O2P.Na)x CAS Number:71050-62-9 Storage conditions:2-8�°C Odor: Slight odor Active content (as acid)% :40%;50% PH(1% solution) : 3.5-4.5 Density(20ºC) g/cm3 : 1.15 - 1.25 Appearance : Llight yellow transparent viscous liquid PCA, or Poly(carboxylic acid), is a key member of the family of organic phosphonates,widely used in water treatment applications. A scale and corrosion inhibitor for cooling circulation water units and boilers;Metal chelate agent and color fixing agent for print and textile; Complexing agent for electronplate and water scale cleaning agent for metals.
Water processor Carton
1. Trichloro isocyanuric acid, tcca water treatment Chemicals 2.Type: powder, granular, tablet 3.Packaging: 25kg/50kg per fiber drum 25kg/50kg per fiber drum; 25kg/50kg per plastic drum;
7. Payment terms :, tt and l/c at sight , 8. Usage, :widely applied for treating the domestic drinking water , domestic sewage and industrial waste water . , 9. Package: pp woven bag with pe lined bag (25kgs/bag) or pe bag (20 kgs/bag) , 10. Storage: the products shall be sealed and stored in the dry and ventilated place to prevent from rain , high temperature and strong sunlight . , 11.Application method: 1)the liquid product can be, used, directly or, used after dilution. , , , dilution is necessary before, used for the solid product. The normal dilution ratio for the solid product is 5%-15%. , 2)the specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton. Plastic woven bag with pe lined bag (25kgs/bag)
