Description YL-09 NP is naphthalene-based non-chloride set-accelerating water-reducing admixture, it significantly accelerates setting time, and reduces the quantity of mixing water necessary to produce concrete of a given consistency, while providing greater economy for a given strength. It increases strengths and significantly improves permeability, workability and finishing characteristics. It complies with GB 8076-2008, GB50119-2003 and ASTM C494, Type E. Uses This product is designed for the constructions requiring earlier strength for normal concrete, steel-reinforced concrete, and pre-stress concrete under normal temperature, low temperature (-5 to 30 degree C). Widely used in pre-cast & deposit concrete, armored concrete, pre-stressed reinforced concrete and fly-ash-cement concrete. Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc. Suitable for self-cured concrete and its formulations. It has remarkable effects of water reduction and enhancement, especially at the early stage. The modulus and site utilization can be improved. Advantages Accelerating setting time across a wide range of temperatures. Increasing early and ultimate compressive and flexural strengths. Water reducing 10-15% with low dosage of 1.5-2.5% After application, all physical properties of concrete can be improved to a certain extent. 10%-15% of cement will be reserved when it is applied as a condition of blending in which collapsibility and strength are fixed forehand. Specifications Item Norm Item Norm Appearance Gray powder PH value 7-9 Fineness (0.315mm remains) % ¹12% Chlorine content Non Moisture ¡¨¹10% Fluidity of cement 160mm Technical Data Sheet Item Actual results Criteria Water-reducing rate (%) Y12 Y8 Bleeding rate ratio (%) 90 Air content (%) ¡¨¹2.5 4.0 Setting time difference (min) Initial setting -30+30 -90+90 Final setting -30¡«+30 -90+90 Compressive strength ratio (%)Y 1 day 145 135 3 days 140 130 7 days 120 110 28 days 110 100 Shrinkage ratio (%) 28 days ¡¨¹120 135 Corrosion reinforcing steel bar Non Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Power Tools & Other Tools: Power Tools, Cordless Power Tools, Hand Tools, Power Drills, Cutting Tools & Machines, Gardening Tools & Clamps Etc Electrical Supplies & Electronic Equipment: : Generators, Batteries, Stabilizers, Switches & Sockets, Air Conditioners, Deep Freezers, Ups, Led Lights, Led Bulbs, Decorative Lights, Welding Equipment, Pumps & Motors Etc, Safety Kits & Ppe Supplies: Safety Shoes, Safety Masks, Safety Goggles, Safety Gloves, Safety Jackets, Safety Helmets, Hearing Protection, Safety Signs & Signals, Ppe Kits, Raincoats, Falls Protection Equipment, Disposable Workwear, Safety Kits Etc, Hardware & Plumbing Supplies: Sinks, Sanitary Ware, Taps, Faucets, Showers, Padlocks, Door Locks, Paints & Coatings, Drains, Plumbing Kits Etc, Power Transmission: Fenner, Contitech, Megadyne, Skf, Fag, Ntn, Arb Bearings Etc, Pipes & Fittings: Jindal, Msl Etc..
NNDiisopropylethylamine CAS7087685 NNDiisopropylethylamine NEthyldiisopropylamine 3METHYL1BUTINE3OL BIOTECHGRADESOLVENT995 DIPEA Ethyldiisopropylamine Hnigs base CAS Number7087685 EC Number2303920 MDL numberMFCD00008868 Appearance Colorless to Light yellow clear liquid PurityGC min 990 Quality Level 200 Assay 99 form liquid refractive index n20D 1414 lit Melting Point 45 C Boiling Point 127 C density 0742 gmL at 25 C lit Specific Gravity 092 Molecular Formula Molecular Weight C8H19N 12925 Flash point 12 C Refractive Index 141 Solubility in water Insoluble Solubility soluble in Alcohol Condition to Avoid Air Sensitive CAS 7087685 MDL Number MFCD00008868 Explosion limit 07Â Â 63Â V pH value 123 HO 20Â CÂ as an emulsion Viscosity kinematic 088Â mm2s 20Â C Vapor pressure 14Â hPa 20Â C HS Code 2921 19 99 General description NNDiisopropylethylamine also known as Hnigs base is a sterically hindered amine It is a nonnucleophilic base commonly employed for substitution reactionsIt acts as an activator for chiral iridium N P ligand complexes which can be utilized in the hydrogenation of unsaturated nitriles The influence of varying concentration of NNdiisopropylethylamine on the synthesis of olvanil in the presence of lipase catalyst has been investigated Application NNDiisopropylethylamine may be used in the synthesis of mannosylated ovalbumin peptides TBDPS protection of Alcohols using tertButylchlorodiphenylsilane BOM protection of Alcohols using Benzyloxymethyl Chloride Storage and transportation Should be sealed and stored in a dry cool and ventilated warehouse Package 200KGdrum Storage It is recommended to store in dry and cool area with proper ventilation Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance Do not inhale dust and avoid skin and mucous membrane contact Smoking eating and drinking are prohibited in the workplace After work shower and change clothes Store contaminated clothes separately and wash them before use
2-(1-methylpropyl)phenol CAS89-72-5 2-sec-buty phenol 2-(1-methylpropyl)phenol 2-sec-buty phenol O-S-BUTYLPHENOL; ORTHO-SEC-BUTYLPHENOL; OSBP 1-(1-Methylpropyl)phenol; Phenol, o-sec-butyl-; Phenol,2-(1-methylpropyl) CAS No. 89-72-5 Molecular formula C10H14O EINECS No. 201-933-8 Hazardous material transport number UN 3145 RTECS No. SJ8920000 Hazard class 8 Packing group III Customs code 29071910 Product Number B0732 Purity / Analysis Method >97.0%(GC) Molecular Formula / Molecular Weight C10H14OÂ = 150.22 Physical State (20 deg.C) Liquid Store Under Inert Gas Store under inert gas Condition to Avoid Air Sensitive CAS RN 89-72-5 Reaxys Registry Number 1210026 PubChem Substance ID 87563733 SDBS (AIST Spectral DB) 1789 MDL Number MFCD00002225 Specifications Appearance White to Light yellow powder to crystal Properties (reference) Melting Point 14 C Boiling Point 228 C Flash point 102 C Specific Gravity (20/20) 0.98 Refractive Index 1.52 Solubility in water Insoluble Solubility (soluble in) Alcohol, Ether Transport Information: UN Number (DOT-AIR) UN3145 Class (DOT-AIR) 8 Packing Group (TCI-A) III HS Number 2907.19.2000 Storage and transportation: Should be sealed and stored in a dry, cool and ventilated warehouse Package: 200KG/drum Storage: It is recommended to store in dry and cool area with proper ventilation. Please fasten the lid as soon as possible after original packing to prevent the mixing of other substances such as moisture from affecting the product performance. Do not inhale dust and avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothes separately and wash them before use. Maintain good hygiene habits.
1. Accurately improved air pressure sensor and shutting off automatically at desired pressure to avoid over inflation; upgraded digital chip sensor which makes the error smaller and it stops automatically when the set value reaches. 2. A variety of presets, with five scene presets and four air pressure units, one-key switching. 3. Upgraded backlight of all buttons, added several LEDs next to the operation buttons, and lightened screen and buttons when they are turned on, making it more convenient to operate at night. 4. Lamp panel with lighting design, upgraded 19�?13.5mm lamp panel lighting, farewells small lamp bead low lumen. You can use it as an air pump and a flashlight. 5. Three lighting modes, the first long press to turn on the light (white light is always on), long press the second long press to turn on the warning light (red light strobes at low frequency ), the third long press to turn on theSOS distress light (red light SOS strobes). 6. The sink design of anti-scald inflatable port , which can reduce the probability of scald event to some extent.Because the temperature of the inflatable port can reach 120 �°C when inflating. 7. Upgraded ventilation system; increase the ventilation area, which is more conducive to internal heat dissipation and makes the work more stable. 8. Emergency external charging, equipped with USB power output interface, which can be used as a temporary power bank.
Sicilia Fredda is proud to bring you its local produce Sicilian Pecorino cheese DOP. The Pecorino Siciliano DOP is produced exclusively with whole sheep's milk, fresh and coagulated with lamb rennet. The Pecorino Siciliano DOP has a cylindrical shape with flat sides with a 10-18 cm high side. The weight of the wheels varies from 8 to 12 kg. This is the oldest cheese produced in Sicily, probably the oldest in Europe. It is an excellent meal cheese *, especially if eaten fresh or semi-seasoned, the Sicilian DOP Seasoned Pecorino is widely used as a grating cheese, to flavour first courses, but also with bread and olives, fruit and honey which they tend to attenuate the rather spicy flavour. It goes well with red wines, better if full-bodied. *Its solid non-flaky texture makes it easy to enjoy as a snack or nibble, thinly sliced or in cubes as a garnish for salads and sandwiches. SEASONED PECORINO 'STAGIONATO' The seasoning period is carried out in naturally ventilated rooms and is not less than 4 months. The crust is yellowish white in colour and has a wrinkled surface that reflects the modelling of the basket in which it was placed. The paste is hard and compact, white or straw yellow in colour with slight holes. The smell is spicy, fresh and floral; the strong and fruity taste, more markedly spicy for the more mature cheese. Available in 10-12 kg wheel size. FRESH PECORINO DOP PRIMOSALE The Primosale is the starting part of the Pecorino making process. The preparation is carried out in naturally ventilated rooms and is not less than 4 months. The crust is yellowish white in colour and has a wrinkled surface that reflects the modelling of the basket in which it was placed. Available in 10-12 kg wheel size
RETECH Prefab Steel Structure Chicken House Solutions Steel structure solutions specially provided for chicken house RETECH advantages 1.The perfect combination of chicken house and equipment >Optimal production performance >Safer chicken house environment >Ideal tunnel ventilation effect  >Lower house maintenance and operating costs 2.Reinforced structure design for chicken houses >Comply with national construction codes and standard specifications >Anti-typhoon structure verification(up to 275 km/h, can resist typhoon) >Seismic crack verification (not less than 8 level) >Professional structural design for aerodynamic ventilation 3. Compared with traditional concrete chicken houses,the steel structure chicken house has the following advantages. >The construction period is shortened by about 1/3, reducing the pressure of capital occupation and the risk of market changes. >The chicken house design can be more flexible. >Few columns inside chicken house, high space utilization. >Recyclable construction materials make the chicken house more environmentally friendly. >The indoor environment of of the chicken house more constant. >Double-tier chicken house can be doable with higher land utilization rate. Important and effective technical details 1.Optimal production performance 2.Safety factor above 1.0 3.Ideal chicken house insulation 4.Higher corrosion resistance RETECH service We are more than happy to provide you with one-stop service including project consulting,designing,manufacturing,shipping,installing,maintaining as well as poultry breeding instruction CONTACT US NOW YOU WILL GET FREE TURN-KEY TOTAL SOLUTION We'll get back to you within today.
Designed with versatility, ARCADIO Armor Masks are classy and chic. Made with at most detail considering health and safety alongside fashion, these masks are enhanced with anti-bacterial and anti-microbial finish which comes in pretty cool patterns and colors that adapts to the mood of the wearer PROTECT IN STYLE Tailored from a premium rich cotton fabric, ARCADIO ARMOR face masks are enhanced with high defined Multi-layer protection with maximum coverage to safeguard from harmful virus, bacteria and prevent from extreme moisture, dust and pollution while ensuring enhanced air ventilation. Also, Our masks are not just safety but also a fashion statement KEY FEATURE 7 LAYER PROTECTION ARCADIO Armor face masks are constructed in 7 high defined layers that provide full protection to safeguard from harmful virus and bacteria, while ensuring ample comfort. Rich cotton woven top layer, 5 middle layers consisting of 2 Melt blown and 3 Spun bound layers covered with cotton woven linen with breathable fibers underneath to ensure enhanced air ventilation and for added comfort INDIA'S FIRST EVER MASK WITH ADJUSTABLE STRAP ARCADIO's innovative step towards comfort for the new reality has been first ever in India. Adjustable straps provide superior comfort that helps the mask to do its protection at its maximum and ease you from the pain. It is easy to maintain, wear and always comes in handy WHY ARCADIO ARMOR ARCADIO Armor protection masks are not just for safety but also a fashion statement. The Snug fit construction, Soft ear loops, adjustable Head strap, bendable wire nose strip, rich cotton fabric makes this mask fit several different face shapes securely and comfortably. ARCADIO Armor has been tested as per standards set by BIS (Bureau of Indian Standards) in Ministry of Textile approved labs, which deliver exceptionally high levels of protection. Priced economically and styled fashionably, ARCADIO ARMOR is the go to face mask which satisfies all your needs in this pandemic.
CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Introduction Single Beam(single light source, single wavelength) NDIR CM1106 (Miniature size) can be used to detect CO2 concentration of indoor air by adopting advanced non-dispersive infrared technology(NDIR). It is widely used in IAQ monitor, air conditioner with purifying function, air purifier, ventilation system, automotive and other consumer electronic products etc. CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Features * Advanced non-dispersive infrared technology(NDIR) with independent intellectual property * High accuracy: temperature calibration within whole measurement range * High stability: advanced auto-calibration at background * Small size and compact structure, easy to install CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Application * IAQ monitor * Air conditioner with purifying function * Air purifier * Ventilation system * Automotive CM1106 Carbon Dioxide Sensor NDIR CO2 Sensor Module Specification * Measurement range: 0-2000ppm (extending to 5000ppm, 10000ppm) * Accuracy: auto-calibration within temperature and concentration range * Working temperature: -5~50'C * Storage temperature: -20~60'C * Working humidity: 0-95%RH (non-condensing) * Signal output: UART-TTL, PWM, IIC * Dimension: 33*19.7*8.9mm * Maintenance: Auto-calibration
Key features: Two independent differential pressure sensors Robust design, over-pressure protected Selectable pressure unit Signal output with possibility of spreading and inverting characteristic curve with any offset (optional) Characteristic conversion of output via 3, .30 entries tablets) Fully programmable via pc based eu03 module Large led display Key specifications: 1.Two independent differential pressure sensor. 2.Measuring range (of each sensor): 0 ~ 4.0 mbar up to 0 ~ 100 mbar; , ± 2.5 mbar to , ± 60.0 mbar 3.Maximum static operating pressure: 50 mbar to 500 mbar 4.Maximum safe pressure: 150 mbar to 1500 mbar 5.Straight line deviation error (max): 1.0% full scale 6.Pressure connection: g 1/8 female threads with optional cutting ring fittings for 6 or 8 mm tube 7.Operating ambient & media temperature: -10, ° c to +70, ° c 8.Protection class: ip65 per din en 60529 9.Electrical output: 4-20ma or 0-10v, 3 , ?? wire 10.Power supply: 24 v dc/ ac 11.Switching contacts: 2 sets of programmable voltage free contacts: no or nc 12.Display: 3 1/2 digit led 13.Electrical connections: two round shell multi-pin connector sockets (m12, male) 14.Material, housing: polyamide pa 6.6 15.Materials, media contact: silicon, pvc, aluminum, brass Application areas: 1.Roll band filter monitoring 2.Vacuum system monitoring 3.Chimney draught measurement 4.Flow and control pressure monitoring 5.Surface coating system 6.Pump monitoring and control 7.Compressor monitoring and control Industrial areas: 1.Air conditioning and ventilation systems 2.Auditorium, office, conference rooms 3.Hvac and ventilation application 4.Environment monitoring 5.Clean room and laboratory rooms
Key features: 1.Robust design, over pressure protected 2.Maintenance free through wear-free inductive pickup mechanism 3.Switchable pressure units 4.Optional signal output with possibility of characteristic curve spread and reversal with any offset 5.Characteristic curve implementation via table with max. 30 measuring points 6.Complete adjustment of all parameters and measuring point protocol possible through 7.Optional pc adaptor eu03 8.Large led display Key specifications: 1.Measuring range: 0 ~ 160 mbar to 0 ~ 600 mbar 2.Maximum static operating pressure: 40 bar 3.Overload capacity: single sided overpressure proof upto the rating of measuring system, (+) and (-) side, vacuum proof 4.Straight line error (max): , ± 2.5% full scale 5.Temperature drift: 0.8% full scale / 10k 6.Pressure connection: female thread g 1/4 without optional cutting ring fitting for 6 or 8 mm tube 7.Operating ambient & media temperature: -20, ° c to +70, ° c 8.Protection class: ip65 per din en 60529 9.Electrical output: (0) 4-20ma, 0-10v, 3 , ?? wire 10power supply: 24 v dc/ ac 11.Switching contacts: 2 sets of programmable voltage free contacts: no or nc 12.Display: 3 1/2 digit led display 13.Electrical connections: two round shell multi-pin connector sockets (m12, male) 14.Material, housing: polyamide pa 6.6 15.Measuring element: brass, viton, epdm Application areas: 1.Flow rate and volume monitoring of air, gaseous media in ducts 2.Filling level monitoring of tank / containers for liquefied gases (n2, o2, argon and co2) 3.Compressor monitoring and control Industrial areas: 1.Air conditioning and ventilation systems 2.Hvac and ventilation application 3.Environment monitoring 4.Clean room and laboratory rooms
Key Features: 1.High sensitivity 2.Robust Design, over pressure protected 3.Wear resistant sensor 4.High resistance to corrosion 5.Low hysteresis 6.Large LED Display Key Specifications: 1.Measuring range: 0 ~ 6 mbar to 0 ~ 60 mbar, max static pressure: 32 bar 0 ~ 32 mbar to 0 ~ 320 mbar, max static pressure: 140 bar 0 ~ 130 mbar to 0 ~ 1300 mbar, max static pressure: 140 bar 0 ~ 500 mbar to 0 ~ 5000 mbar, max static pressure: 140 bar 0 ~ 2 bar to 0 ~ 20 bar, max static pressure: 140 bar 2.Linearity: < 0.1 % 3.Hysteresis: < 0.1 % 4.Temperature coefficient: < 0.5 % / 10° C 5.Operating ambient temperature: -10° C to +70° C 6.Operating media temperature: 0° C to +80° C 7.Protection class: IP67 8.Electrical output: 4-20mA 9.Power supply: 24 V DC 10.Pressure connection: 2 x 1/4� NPT 11.Display: analog display with 0 ~ 100% scale. digital display (only with communication module option -K installed) 12.Electrical connections: internal terminal block 13.Material (media contact): Stainless steel 316 L (1.4404) 14.Electronic housing: Aluminum, surface coated 15.Marking / approval: CE mark, complies with EMV specifications EN 50082-1 and EN 50082-2 Application areas: 1.Filter technique 2.Precision measurements in air conditioning conduits 3.Clean room pressure compensation 4.Burner vacuum measurement 5.Circulating air controlling in furnaces Industrial areas: 1.Air conditioning and ventilation systems 2.HVAC and ventilation application 3.Environment monitoring 4.Clean room and laboratory rooms
Key Features: 1.Very low pressure measurable without long-term drift 2.Rugged design 3.Maintenance free 4.Over-pressure protected Key Specifications: 1.Measuring range: 0 ~ 25 Pa to 0 ~ 1000 Pa 2.Maximum static operating pressure: 1.0 bar 3.Maximum safe pressure: 1.7 bar 4.Straight line error (max.): 1.0 % Full scale 5.Pressure connection: screw clamp connectors (aluminum) for 6/4 mm or 8/6 tube 6.Repeatability: 0.1 % full scale 7.Operating ambient & media temperature: -10° C to +70° C 8.Protection class: IP65 per DIN EN 60529 9.Linearity: < 2% Full scale 10.Electrical output: 4-20mA linear, 2 â?? wire 11.Power supply: 24 V DC 12.Material, housing: Polyamide PA 6,6 13.Materials, media contact: Silicon, PVC, aluminum, brass Application areas: 1.Filter status / condition monitoring 2.Precision air duct measurement 3.Clean room pressure balance monitoring 4.Burner air feed low pressure detection 5.Oven air feed control Industrial areas: 1.Air conditioning and ventilation systems 2.Auditorium, office, conference rooms 3.HVAC and ventilation application 4.Environment monitoring 5.Clean room and laboratory rooms
Dust Sensor Module DSM501B Description Dust Sensor Module: DSM501 series detects the level of indoor airborne dust, particles, and pollen, and ideal for use in stand-alone air cleaner or IAQ monitor. PWM output of the sensor can be directly connected to μ-com to control fan speed or ventilation and also to display the level of particles. Detectable size of particle is limited to minimum 0.7 μm, and the application for smoke or fire alarm is prohibited. Dust Sensor Module DSM501B Type: DSM501A : 2mm pitch connector type (20010WR-05). DSM501B : 2.5mm pitch connector type (S5B-EH). Dust Sensor Module DSM501B Electrical characteristics: Supply voltage: DC5V +/- 10% Power consumption: 90mA Operating temperature range: -10~ +65'C Operating humidity range: 95%RH or less (without dew condensation) Recommend storage condition: -20~ +80'C Dimension: W59 * H45 * D20 (mm) Detectable particle size: approx. 1um (minimum) Detectable range of concentration: 0 ~ 1.4mg/m3 Output signal: PWM (pulse width modulation) Time for stabilization: 1 minute after power turned on Sensor characteristics: To be maintained in between the upper limit and lower limit of the standard dust sensor unit Dust Sensor Module DSM501B Features: * PWM output * Easy installation * Single power supply * Compact size and lightweight Dust Sensor Module DSM501B Application: * Ventilator etc * Air conditioner * Air quality monitor * Air cleaner or Air purifier
Scope Applicable standards: astm d6082 sh / t0722 High temperature lubricant foaming characteristics tester for testing the lubricant foaming characteristics at 150 ? when. The samples were heated to 49 ?, cooled to room temperature after 30min constant temperature, the sample was then transferred to a specified cylinder, and heated to 150 ?, diffusion into the metal head through the drying air, ventilation 5min, aeration is stopped immediately before the determination of the static static amount of foam amount of foam, the foam volume and movement after stopping ventilation predetermined time, the time and the total volume of the foam disappears percentage increase. Features 1, the instrument for the split, including heating bath and precise flowmeters. 2, high temperature resistant borosilicate glass cylinder, f300 × 450mm, meet the standard requirements; 3, environmentally friendly heating oil bath, to reduce soot on the human body injury, efficient heat insulation effect; 4, stainless steel heater; 5, the air filter with glass wool; 6, microprocessor thermostat and pid control, digital display the temprature, accuracy 0.1 ?, pt100 rtd temperature probes; Technical parameters 1. Temperature control mode: pid digital temperature controller import 2, temperature control accuracy: ± 0.1 ? 3, the heating method: heating oil bath 4, the whole power: 2.5kw 5, work unit: 2 6, the flow control: precision flowmeter 7, power supply: ac220v / 50hz 8, temperature range: 150 ± 0.1 ?
Rd3161l multifunctional engine oil additive for ci-4/sl 1. Description Rd3161l has been developed to formulate high quality automotive engine oils and multigrade oils. The following performance levels can be achieved with oils formulated with rd3161l. 2. The recommended dosage Performance level Dosage (wt%) Ci-4¡¢ch-4/sl 12.0 Cf-4/sl 7.5 Cf-4/sj 6.2 Cd/sf 4.8 3. Characteristics Item Typical value Test method Flash point (coc) ¡ãc, 180min Gb/t 3536 Kinematic viscosity (100¡ãc), mm2/s Report Gb/t 265 Calcium, wt%, 3.0-4.0 Sh/t 0270 Tbn, mg koh/g, 110-120 Sh/t0251 Zinc, wt%, 1.1-1.5 Sh/t 0226 Phosphorus, wt%, min 0.8-1.1 Sh/t 0296 Nitrogen, wt%, 0.5-0.7 Sh/t0224 Magnesium, wt% 0.15-0.25 Sh/t0027 Boron, wt% 0.1-0.2 Sh/t0227 Molybdenum, wt% 0.02-0.03 Spectrophoto Metry 4. Packing and storage The packing, marking, transportation, storage and delivery acceptance should meet the requirements of sh/t0164. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses. It is packed in 200 litre metal drum. Store in dry, clean and ventilating warehouses.
Product Description The Islander LX Series, new for the 2001 season, is the result of a decade of development. The five LX models incorporate Islander's renowned drag system into an extremely light spool and frame. The open-face spool construction, with ventilated arbor, is designed for minimal weight while maintaining Islander's reputation for unsurpassed durability.
We are supplier of all type of beekeeping suits, jackets and gloves with high quality. We provide high quality with reasonable cost We makes three layer ventilated suit with 100% breathable and sting proof with fancy veil Easily remove and attach. 1005 cool and comfortable during working in form.
Leggings Art No :SS-321 Descriptions > Round neck > Optivent ventilation technology > Inner rubberised grip at the waist > Sondico branding > Shell: 92% polyester 8% elastane > Mesh:82% polyester 18% elastane > Machine washable at 30 degrees > Keep away from fire and flame
Compression Wear Art No :SS-317 Descriptions > Round neck > Optivent ventilation technology > Inner rubberised grip at the waist > Sondico branding > Shell: 92% polyester 8% elastane > Mesh:82% polyester 18% elastane > Machine washable at 30 degrees > Keep away from fire and flame
