We supply high quality Used Engine Oil from Canada and USA, will be in Flexitanks, and shipped in 20' containers. Up to 2000MT available per month.
Biodiesel | Scope Oils, Cooking, Vegetable, Recycled ITEMSTANDARD Free fatty acids 3 % Max M.I.U(Moisture and Impurities)0.1 % max Saponification value: 18185-1955-195 Iodine value 120 Titre C (melting point)13.75 'C Specific Gravity 25'C0.915 Density (kg/m3)920 Flashpoint by P.-M. (Degree C)220 Calorific Value (kj/kg)36,000 Kinematic Viscosity (40 deg.C)(mm2/s) Carbon Residue (mass-%)0.4 Sulphur Content (mg/kg)18 Contamination (mg/kg)24 Acid Value (mg KOH)/g)7.0 Oxidation Stability (110 deg.C)(h)5.0 (min) Phosphorus Content (mg/kg)15 Ash Content (mass %)0.01
NSH GER series used oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery f+s lubrication oil. Ger series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly. Edges of GER * two main filtering systems ensuring continuous work. * no acid used during operation. * stainless steel made filters. * remove exhaust gas quickly and efficiently. * heat preservation material keeping high efficient heating. * turnkey project. * purify blended oils. * low operation cost. * low maintenance and replacement expenses. * high regeneration rate. * automatic reverse-washing system improving performance of filters. * high performance security system. * small size, light weight, low.
Nsh ger used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryf+s lubrication oil. Ger recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly.
Application NSH GER used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery's lubrication oil. GER Recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly. Edges of GER 1.Design according to different customers’ needs including Turnkey Project. 2.Purify blended oils. 3.Low operation cost. 4.Low maintenance and replacement expenses. 5.High regeneration rate. 6.Automatic reverse washing system will extend the lifetime and improve the performance of the filters. 7.High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely. 8.Small size, light weight, low noise. 9. Two main filtering systems in the GER which can ensure the GER works continuously by batch. 10.Environmentally friendly. Technical Specifications Item Unit GER-1 GER-2 GER-3 GER-4 GER-5 GER Product Line Treatment Capacity L/8 -10hrs 2000 4000 6000 8000 10000 Above 10000 Regeneration Rate % 70-90% Working Pressure MPa -0.095-0.4 Temperature 60-200 Working Noise dB(A) =90 Heating Power KW Inlet/Outlet Pipe Diameter Mm F42 Weight kg 6000 6700 7200 8000 8500
Used engine oil from vessel, refinery plants, heavy machines for sale in large quantity for continuous buyers.
One time shipping per week, closing time at every thursday.. Payment term is advanced by tt as per request quantity or order.. 24.000 ltr inside flexybag in 20" container
Density - 0.885 Flash - 147 Degree Viscosity @ 40 - 55 water - 4 to 5 % colour - Black flexi packing, 20' containers
TEST RESULTS RANGE Test Method Unit Range Colour ASTM Blackish Brown Density @ 15 °C ASTM D - 1298 Kg/L 0.87 - 0.89 Flash Point ASTM D92 -12b °C 150-210 Viscosity @ 50 °C ASTM D455-14 cSt 70-120 Water Content ASTM D 95-13 % Vol 4-6 Max
Used engine oil available, suphur below 1%, moisture 0.5, max 1000 mt per month. Origin indonesia, packaging in drums of 50kg flexi bags. Shipment time 20-30 days after issuance of dlc. Payment lc at sight 100% non transferable and irrevocable
GER series Used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery¡¯s lubrication oil. GER series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, GER can restore the color of used oil and remove the scent rapidly.
GER used engine oil purifier Nsh ger used oil purifier machine Nsh ger used oil regeneration system is particularly suitable to filtering used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machineryf+s lubrication oil. Ger recycling series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly. Edges of ger 1. Design according to different customersf+ needs including turnkey project. 2.Purify blended oils. 3.Low operation cost. 4.Low maintenance and replacement expenses. 5.High regeneration rate. 6.Automatic reverse washing system will extend the lifetime and improve the performance of the filters. 7.High performance security system including pressure protection device and automatic temperature controller makes purifier operated safely. 8.Small size, light weight, low noise. 9. Two main filtering systems in the ger which can ensure the ger works continuously by batch. 10.Environmentally friendly.
Waste oil refers to waste oil that has been replaced by various machines, vehicles and ships. Its production process is due to the fact that the lubricating oil during use is contaminated by external pollution, resulting in a large amount of colloidal oxides, thereby reducing or even losing control over friction, reducing wear, cooling and cooling, sealing and isolation, and reducing vibration and other effects that must be replaced. So how do you deal with these changed waste oils? In response to this social problem, DoingGroup has developed a used engine oil purification machine that can obtain clean and transparent non-standard diesel oil through high-temperature distillation and condensation. The main working flow of used engine oil purification machine is: 1. Add waste oil to the reactor and start heating; 2. When the temperature rises to a certain extent, high-temperature distillation chemical reactions can be performed to separate the impurities from the waste oil. 3. Condensate the separated oil and gas, which will be liquefied into light oil and flow into the tank. 4. Automatically pump diesel to remove odor and color removal system; 5. Finally get high quality diesel. The main products of used engine oil purification machine are diesel and asphalt. Among them, the oil production is about 85%, and the rest includes 10% of bitumen and 5% of excess gas. Excess gas will be recycled to the furnace as an auxiliary heating fuel. Their main uses are as follows: 1. Diesel oil: Mainly used for heavy machinery, generators, boilers. 2. Asphalt: Mainly used for paving or sent to asphalt plants for re-refining. What are the main advantages of used engine oil purification machine? 1. The rapid heating system of the refining equipment adopts the heating of the circulating heating medium and the fuel at the same time, on the one hand, the fuel can be saved, and on the other hand, the distillation speed can be accelerated. 2. The diesel oil produced through the standard refining system is brownish yellow. If you want to get better color diesel, we can also provide a deep purification system, and finally you can get pale yellow diesel products.
used engine oil recycling machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production. systems of used engine oil recycling machine 1 Pretreatment systemWaste oil will be pumped into the distillation kettle after pretreated. 2 Distillation system: through burning gas , fuel oil or coal to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system. 3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel. 4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank. 5 Vacuum system: meet the technology requirement. 6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel. Recovery rate Base oil: 85%~88 %( index same as SN150~SN200) Gasoline: about 3% Diesel: about 3%-4% Oil residue: 6%~8%
This equipment apply to recycle the used engine oil. It can remove the tiny impurity dispersed in oil such as carbon particles, deep oxides and bad substance like colloid, bitumen. Kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile. Features: 1. It is a physiochemical application to eliminate the electric charge between polar particulate in waste oil, which is gathered into large particles and separated. The colloid, bitumen and other compound in oil are also removed while harmful gas and the filtration and the vacuum dewatering function of waste gas cleaner remove water content. 2. High precision stainless steel net is used, which is anti-corrosive, high temperature resistant and has a good mechanical strength and long lifetime. It is easy-to-use, and utilizes the economical pressure filter as filter medium. 3. Novel structure, good layout and is deemed as a mini refinery. 4. Very straight and evident effect, can also serve for multiple purposes. 5. Can be tailored to meet the needs of an individual customer. L:1500mm W:1000mm H:2000mm.
Ger series used engine oil regeneration system is particularly suitable to regenerate used internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery¡¡¥s lubrication oil. Ger series are able to effectively remove colloid, oxid, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ger can restore the color of used oil and remove the scent rapidly. Different types
This purifier can remove the tiny impurity dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well. This kind of purifier is applicable to purification of various engine oil used transport facilities such as ship and automobile.
Used Motor Oil (UMO) SPECIFICATIONS : Please contact us or send us an email at info [a] saga-petrochem.sg.tn for more details. SAMPLE : Sample is available upon request at buyer's costs. PACKAGING AND DELIVERY : (1) Steel Drum / Barrel (200 litres) (2) IBC Tote Tank (1,000 litres) (3) Flexibag / Flexitank (22,000 litres)