Characteristics As a near-by card reader, it reads the inherent information from an entry card, and sends the data to entry control system. Function - ISO 14443A/Mifare type Card is supported. It functions as a recognition device by connecting to entry control system controller. Tamper Alarm Function - Alarm of the detachment and opening of a card reader (Alarm Sound is emitted.) - It is possible to send alarm data in using RS-485 communication way. Voice Guidance Service Function (Option) Specification - Communication with a Controller RS-485/Wiegand Output Metal Cabinet - Tamper Alarm HOST RS-485 1PORT, 9600/19200/38400 bps AUX. : RS-485 1PORT, 9600/19200/38400 bps
YST307GU series are RFID reader/writer module which pick or send command by USB ports. YST307GU series meet kinds of international contactless IC card standards. Also YST307GU series can support kinds of cards from suppliers. YST307GU series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC400 Working frequency: 13.56MHz RF standard: ISO15693 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: USB Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
YST307AS series are RFID reader/writer module which pick or send command by RS232 ports. YST307AS series meet kinds of international contactless IC card standards. Also YST307AS series can support kinds of cards from suppliers. YST307AS series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Characters: The module is connected to the antenna by the 50���© cable. It is with flexible antenna size and layout. Qualifications PCD: NXP RC500 Working frequency: 13.56MHz RF standard: ISO14443A, ISO7816 SAM card slot: 2 Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only. Auto detecting card: yes, default OFF EEPROM: 4K Interface: RS232 Max command length: 1024 Bytes Interface level: 3.3V Power consumption: 50mA Dimension: 80mm*60mm*8.5mm Package: DIP32 Weight about:100g
Introduction: When the card approach the reader, the red light turn into green;after glinting to turn redcolor again, the buzzer sound shows transiting data.It has 500ms proximity time distance for card proximity. Features: Model Acr-101 Size 122x 46x 23mm Color Dark grey Voltage Dc5~16v Current =100ma Ambient temperature -25-75 Reading range 5~15cm Output format Wiegand 26/34, rs485/232 Card type Em-id/mifare-ic Comunication distance Wg=100m, rs485=1200m
Computer accessories, USB hub, card reader, USB adapter, converter, HDD docking station, USB cable, display port converter.
Compatible With Universal Serial Bus Specification ver2.0 And Also Backward Compatible With USB1.1 USB 2.0 transfer rate up to 480Mbps ,backward USB 1.1 transfer up to 12Mbps Data copying between cards without storage intermediate,and it also allows you to upload photos/data from compatible media cards to a computerí»s hard driver Four media slot can be used at the same for data exchanges. Low power consumption. Support Firewire (IEEE 1394) With Sata and Sata power Port Support the HD Audio input/output It is compatible with WinME,Windows 2000 and Windows XP, Win Vista operating system,it is also compatible with Mac OS 9.2 or higher operating system
Molex/jst/amp/hrs/jae/yeonho connector, wire harness assembly, cable assembly, HDMI cable, card reader, USB cable.
USB flash drive, pendrive, memory card, mobile phone..
Rfid card rfid tag/label rfid reader printable rfid card card printer access control system door lock.
Mobile accessories, speakers, pendrive, memory card and more...
4 ports, with led indicator usb2.0 compatible USB1.1; Runs at 480mbps; Plug&play supports; Beautiful design; Different colors available; Blister packaging
Castles Technology MP200 EMV Credit Card Reader Bluetooth Wifi MP200-L-PCI-B-WI-BT-CLGL-S2 (NEW) Lot of 60 pcs ***Hebrew Version*** Castles MP200/MP200L is a high quality mobile device. MP200 / MP200L gives you flexible options of Bluetooth, WiFi, Micro-USB and 2G/ 3G/ 4G connectivity. In addition, MP200L is equipped with optional touch screen which is a ground breaking solution to all your payment needs anywhere, anytime. MP200L is the world?s most adaptable, secure and innovative device offering organizations and businesses of all sizes a next generation mobile payment solution.
Standalone Access Controller without Keypad 1. Waterproof degree: IP65 2. Capacity: 15,000 users 3. Working frequency: 125KHz or 13.56MHz 4. Wiegand Input and Output
The S2-EM is a compact, waterproof stand-alone programmable access control system. The product unique feature is simple in design, easy operation, and high reliability. Main Feature > Waterproof, conforms to IP66 > One relay, 2000 users, standalone > Card type: 125KHz EM card only > Working temperature: -40 oC ~ 60 oC (-40 oF ~ 140 oF) > Pulse mode, toggle mode > Built in LDR for anti tamper > Card block enrolment > Easy for programming by master cards and remote control > Easy for install, 6 wires only
> IK10 anti collision > Metal Case, anti-vandal > Waterproof, conforms to IP66 > Wiegand 26~44, 56, 58 bits output > Card Type: 125KHz Hid & EM cards, 13.56MHz NXP Mifare, Mifare Plus, DesFire, Mifare Pro, Mifare UltraLight, Mifare Class 4K cards > Reading range: 3~8cm > External LED Control & External Buzzer Control
Product Description CJT-A6 series motorized card reader/writer supports RF/IC card R/W and magnetic card R, which is a product created from many years of technology and experience accumulation of ACT and the market demand. CJT-A6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly LED; all these enable CJT-A6 to better meet the market requirements for motorized card reader/writer. Product Features *EMV and PBOC certified. *Supports ISO7810/7811 magnetic card reading only. *Supports ISO7816-2 contact IC card reading/writing. *Supports ISO14443-A Mifare Type A/B card reading/writing. *Jitter card-in function: effectively precludes unauthorized card reading. *Protruding bezel: for anti-theft is available *Bezel with LED light: provides card insertion indication and/or lighting and prevents the card being left inside. *Independent sensor design: makes reader maintenance easy. *Dustproof sensor lens: prevents sensor from dust and/or the other foreign materials. *Mechanical shutter for protection against dust and/or the other foreign materials in the bezel position: enhances the reliability of the card reader. *Four-set driving wheels: ensure the card transmission stability and liability and prevent card jam or block. *One group of driving wheels in front of mag-head: enables automatic re-reading, which increases success rate of card reading. *Card detecting function: automatically handles abnormal cards (broken card, incomplete card, etc.) and is able to eject card in case of power failure. *Self-balancing mag-head reading function: provides stable reading and easy maintenance. *High-performance plastic materials: ensure reading precision and product consistency. CUSTOMIZABLE We can make products according to your needs.
There are over 80 types of products in over 500 models. All products are tested to pass the CE,FCC,ROHS and SISVEL certificate. Our products sell well not only in China, but also export to USA, Europe, Middle East and South America.
Key features: Frequency available with 125khz 3.3v ~ 5v dc power supply, uart-ttl interface R/w or read-only uid of t5577 and its compatible cards; Available to set to read different page or block address with password; Optional output as wg26, wg34 or uart ttl External antenna, reading range up to 5~7cm External led&buz available( external driver circuit needed Technical parameters: Electrical specification Power supply dc 3.3v-5v Power consumption < 45ma Operation frequency 125khz Baudrate 9600~115200 bit/s ( default 9600bps) Interface uart ttl Antenna external, stamp-hole Reading range 50- 70mm (depends on tag and antenna size) Mechanical specifications Dimension 25mmx16.5mmx2.8mm (lxwxh) Weight 3g Material fr-4, blue Model chk102mt Environmental conditions Operation temperature -20 +80 degree Storage temperature -40 +85 degree Humidity relative humidity 595% Supported standard/ tags T5567,T5577 and compatible cards Sdk information Demo software windows, c# program language Files comprotocol document User manual Demo.Exe
Key Features: 3.3V ~ 5V DC Power supply, RS232 or UART TTL; Compatible with ISO14443 A/B, ISO15693 ,ISO7816 T=0 PSAM card standard R/W MIFARE Classic 1K /4K, MIFARE Ultralight/Ultralight C, MIFARE DESFire, ISO14443A-4 contactless CPU card, I CODE SLI, etc Internal with 4 PSAM socket External antenna with 1.25 2P connector/IPX, reading range up to 5~7 cm Internal BUZ available for indication Technical Parameters: Electrical Specification Power supply DC 3.3V ~ 5V Power consumption < 150mA Operation frequency 13.56MHz Baudrate 9600~115200 bit/s ( default 115200bps) Interface UART TTL or RS232 Antenna External with 1.25 2P connector or IPX Reading range 50- 70mm (depends on tag and antenna size) Mechanical Specifications Dimension 76mmx50mmx2.8mm (LxWxH) Weight 10g Material FR-4, Blue Model CHK362MT Environmental Conditions Operation temperature -20 to +80 degree Storage temperature -40 to +85 degree Humidity Relative humidity 5% to 95% Supported Standard/ Tags ISO14443 A Read/write: MIFARE Classic 1K /4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE DESFire EV1, MIFARE Smart MX, MIFARE Plus S / X, MIFARE Pro X, NTAG 21x Read UID only: Read UID only of all other ISO14443A RFID tags ISO14443 B SRI4K, SRIX4K, AT88RF020, 66CL160S, SR176 ISO15693 EM4135, EM4043, EM4x33, EM4x35, I-Code SLI / SLIX, M24LR16/64, TI Tag-it HF-I, SRF55Vxx (my-d vicinity) ISO7816 PSAM T=0, T=1 standard SDK information Demo software Windows, C# program language Files Comprotocol document API document User Manual Demo.exe
Functions Functions Reading distance is more than 15 meters without affect from cars' anti-explosion metal film Directional.reception,interference-free.fromadjacentlanesDual-way machine code authentication; no interference when many readers work together. Signal strength can be adjusted automatically according to climate, Zero-interference from environment Fast identification without affect form vehicle speed Integrated design, simple layout After reading the cards, the reader will flicker and make sounds Two-layer water-proof structure; protection grade is IP66 Product Application Entry and Exit intelligent management parking system ETC Electronic Toll Collection System Non-stop counting system for vehicle Non-stop Attendance system for bus Electronic road test for driving system Technical Parameter Identification Distance Above 15 meters is adjustable and the best adjustment distance range is 5 meters from the railing. Identification Angle within 60 degree tapered region of reader's frontage Sending Channel 38K Receiving Channel 433M Reading Speed More than 60km/hr Communication Interface WieGand26\WieGand34\RS485 Communication Encryption Based on Bluetooth encryption algorithm Working Voltage +9 ~ +18V DC Working Temperature -40~80 degree Dimension 280*250*46(mm),Pole Bracket Ф60*12000mm Weight 4.5Kg Colour Grey\Grayish-black\Red orange(other colours as oredered)ïroviding ODM processing Packing List Host\Power\Connector\Instruction\Testing card