Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
2kva 1600W rackmount Input voltage 115~275V Output 220V/230V/240V Built in battery Back up 10~30min Universal socket
Electric vehicle battery, regulated lead acid battery, E-rickshaw battery, UPS and solar battery.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
20ft container: 26tons (Can load 5.8M Max) 40ft container: 26tons (Can load 11.8M Max) Dimensions 25kg Chemical Composition Sb Sn Zn Fe Cd Pb (Min) 99.99% Alloy Or Not Non-Alloy Secondary Or Not Non-secondary Product name Lead Ingot Pb99.99 Grade and Specification ASTM B749-03 Lead content 99.99% 99.98% 99.9% 99.5% 99.8% Keyword 99.994% High Purity Lead Ingot Color Silver White Packing Customer's Requriements Purity 99.97%Min Shape Rectangular Lump Weight 24-25kg/pcs Delivery Time 7-15 Days
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Material Origin : Car Battery / Van Battery / marine batteries and industrial traction batteries. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. . Automotive Waste Batteries completely washed, cleaned with lead acid contents. RAINs per ISRI Specifications) (Product Detailed SpecWET/DRY WHOLE INTACT CAR LEAD BATTERIES(RINKs and ifications) height :116mm and whight :310 gr height :123mm and whight :350 gr Used Auto Battery Scrap Drained lead battery scraps Lead Battery Plate Scrap Type Battery Scrap 20D 16H Lead Battery Plates Scrap Lead Battery Plate Scrap Type soft lead scrap
Ups and batteries.
PM 890 series UPS is an intelligent 3 phase in 3 phase out the uninterruptible power supply, it adopts double transform high-frequency PWM and high-performance digital control technique (DSP), with perfect protection, super network management function, reasonable man-machine interface, and a series of precision design, meets all high-reliability requirements of uninterruptible power supply and integrates reliable, safety, maintainability characteristics of a new generation low-frequency UPS. The Pure Sine Wave Interactive Outdoor Uninterruptible Power Supply (UPS) has been meticulously engineered to cater to the exigencies of outdoor communication equipment, networking apparatus, and traffic control systems, thereby finding its utility in urban corners, rural expanses, and mountainous terrains alike. This UPS is endowed with attributes such as exceptional heat endurance, frost resilience, corrosion resistance, dust abatement, and waterproofing. Distinguished by its advanced features encompassing a broad spectrum of input voltage and frequency, exceptional dependability, energy efficiency, environmental consciousness, surge protection, remote operational capability, and remote monitoring, our UPS ensures steadfast power provisioning to communication, networking, and traffic control infrastructure. Consequently, it emerges as an indispensable facilitator in the seamless operation of these critical outdoor systems. Features: -100% unbalanced load capability > Superior protection - Online double-conversion with full DSP control - Standard emergency power off (EPO) - Optional N+X redundancy parallel up to 6 units - Support battery cold start and auto-restart when mains power is restored - Output power factor 0.9 - High MTBF (> 200,000 h) - IGBT inverter with output isolation transformer - Standard RS232, RS485, dry contacts communication port - Optional input filter to improve input power factor - Frontaccessmakes maintenance and replace� ment simplified (60 - 120 kVA) - Generator-compatible Low MTTR (< 0.5 h) - ECO mode operation for energy-saving - Optional SNMP communication port - 5.7 inches LCD touch screen, friendly human & machine interface - Intelligent self-diagnosing function, all kinds of failure protection, large capability of history records storage
APC UPS, luminous UPS, batteries.
UPS Built-in isolated transformer. Interference free, give a clean power with high overload performance. True Online UPS, Double Conversion IGBT Technology The Pure Sine Wave online UPS. With the latest double conversion IGBT technology, this UPS can offer the best clean power source for all type of applications. LCD display Human-Machine Interface All important parameters was showed on the screen such as UPS status, battery condition, input and output value, frequency value, loading percentage, etc. 20 KHz PWM Technology 20 KHz PWM circuit, Noiseí_60DB. Wide Input Range 25% tolerance of input voltage is permitted, under full load condition. Protect batteries from frequent switching to backup mode. STS (Static Transfer Switch), Mechanical Failure Free STS (Static Transfer Switch) is provided for output with zero interrupt in the event of outage. There should be less than 2 ms for switching to bypass in the event of UPS failure. Overload Protection Overloaded up to 125%, automatically switch to bypass after 60 seconds. Recovery after load corrected Short Circuit Protection Built-in short circuit protection to prevent any unexpected damage. Hot Standby Function For genuinely redundant power protection, UPS can be installed in hot-standby mode, ready to take over the load automatically in the event of a critical component failure. High-Temperature Protection Built-in Temperature control to protect electronic component from high temperature. Cold Start Function Powerful startup circuit, cold start can be performed even in the battery mode. Charging Current Adjustable Charging current can be adjusted from 1A to 10A. Advance Alarming System Built-in advance alarming system, giving reminders to the users of the UPS status. Computer Interface RS232 communication +UPS monitor software
Type: MU48 12V 2A 30Wh 8000mah Color: black and white Certification: CE,FCC,EMC Application:router,adsl,modem cctv,telecom,wifi,medical,wireless,led,net work,internet Features: anti-fire case, temperature protection, can be solar powered, elegant outlook design Battery Type: li ion battery Function: small,smart,safe,offer power to electronics when the ac power blackout Protection: offer power to 12v0.5A router about 5-6hours
To meet the requirement of the network system to the power, santakups has developed a new generation ups - bpro offline series. It adopts 32bits data-bus microprocessor with robust processing power that is capable of detecting and controlling quickly and accurately all movement of ups to ensure product high reliability. Owe to the use of the double-conversion circuit design, the power used by load is the pure sine wave power by stabilizing voltage and stabilizing frequency and noisy signals filter. Specificationú¦ model b500a/600a b1000a/1200a Max capacity(va) 500va(300w) 1000va(600w) Rated capacity 600va(360w) 1200va(720w) Input commerical power range 145vac-280vac Avr range 165vac-270vac Frequency 50hzía10% Output commerical power sine-wave Inversion simulated sine-wave Frequency commercial power supply:shared frequency with the commercial inversion state:50hzía0.5 Avr voltage range 220vacía10%(auto-sensing) Transfer time typical:5ms(including detection time) Protection overload ups automatically shutdown if overload exceeds 150% of normal value for 30 seconds and 180% for 3 seconds Tel/fax/modem no Short circuit ups output is cut off immediately or input circuit breaker protection Alarm battery back-up beeping sound every 4 seconds when the input is cut off Battery low voltage beeping sound every 1 seconds when the input is cut off Overload continuously beeping sound when overload Battery type sealed, maintenance-free lead acid Capacity (12v, 7ah)x1 (12v, 7ah)x2 Recharge time 8 hours to 90% of full capacity Back-up time typical 20 min(halfload) Battery protection automatic self-test, discharge protection
Introducing NGS Dry-Charged Battery: Trusted Power for Over 25 Years! Embark on a journey of reliability and performance with NGS Dry-Charged Battery â?? a stalwart in automotive power for over two and a half decades. As pioneers in Dry-Charged Lead Acid Battery manufacturing, we bring you a product engineered for excellence. Our batteries, available in both JIS (Japanese Industrial Standard) and DIN (Deutsch Institut Normung) types, are a testament to precision engineering and enduring quality. Whether for conventional or advanced automotive systems, trust NGS to deliver steadfast power you can depend on. Designed without electrolyte, our Dry-Charged Battery boasts an extended shelf life, making it the ideal choice for storage and backup power. Simply add electrolyte, and the battery springs to life, ready to fuel your journey with unwavering performance. Tailored for warm climates, our Dry-Charged Battery thrives in challenging conditions, ensuring optimal performance even in the harshest environments. From bustling cities to remote landscapes, trust NGS to keep you moving forward with confidence. Experience the difference with NGS Dry-Charged Battery where longevity meets reliability, ensuring your vehicle stays powered for miles to come.
Introducing the NGS Maintenance-Free Automotive Battery: Trusted Power for Over 15 Years! Elevate your driving experience with our premium NGS Maintenance-Free Automotive Battery. Engineered to perfection and backed by over 15 years of global market dominance, our batteries deliver unparalleled performance and reliability. Crafted to meet the rigorous standards set by international authorities including JIS, DIN, and IEC, our batteries are synonymous with quality and precision engineering. From compact 32 AH models to robust 240 AH powerhouses, we offer a comprehensive range to suit every vehicle's needs. Say goodbye to the hassle of maintenance with our maintenance-free design, allowing you to focus on the road ahead with confidence. Whether you're navigating city streets or embarking on cross-country adventures, trust NGS to power your journey with unwavering reliability and superior performance. Experience the difference with NGS Maintenance-Free Automotive Battery where innovation meets longevity, ensuring your vehicle stays powered for miles to come.
Introducing ALTA Dry-Charged Battery: Your Reliable Power Companion! Elevate your driving experience with ALTA Dry-Charged Battery â?? the pinnacle of reliability and performance in automotive power solutions. As pioneers in manufacturing Dry-Charged Lead Acid Batteries, we bring you a product engineered to exceed expectations. Our batteries, available in JIS (Japanese Industrial Standard) and DIN (Deutsch Institut Normung) types, embody precision engineering and uncompromising quality. Designed to deliver consistent power, our Dry-Charged Battery is the ideal choice for both conventional and advanced automotive systems. Our Dry-Charged Battery arrives without the electrolyte installed, offering unparalleled versatility and longevity. Perfect for use as a backup battery, it can be stored for extended periods without losing potency. Once electrolyte is added, the battery springs to life, ready to power your journey with steadfast reliability. Tailored for warm climates, our Dry-Charged Battery thrives in even the harshest conditions, ensuring optimal performance when you need it most. Trust ALTA to keep you moving forward with confidence â?? choose ALTA Dry-Charged Battery and experience the difference today!
Nominal Voltage 12V Discharge Temperature -15~50 Nominal Capacity (10 hour rate) 20Ah Charge Temperature 0~40 Number of Cells 6cells Storage Temperature -15~40 2. Rated Capacity at 25 (77 F) 6. Inner Resistance & Max . Discharge Current 10 hour rate (0.1C, 10.8V) 20Ah Fully Charged battery at 25 (77 F) 15m 3 hour rate (0.25C, 10.8V) 16.5Ah Max. Discharge Current 300A (5s) 1 hour rate (0.55C, 10.5V) 11.8Ah Short Circuit Current 1000A 3. Capacity affected by Temperature (10 hour rate) 7. Self-discharge at 25 (77 F) 40 (104 F) 103% Capacity after 3 month storage 91% 25 (77 F) 100% Capacity after 6 month storage 82% 0 (32 F) 85% Capacity after 9 month storage 73% -15 (5 F) 65% Capacity after 12 month storage 64% 4. Dimension and Weight 8. Constant voltage charging at 25 (77 F) Length 181mm Cyclic use 14.4~14.9V Width 77mm Maximum charging current 6A Height 167mm Temperature compensation -30mV/ Total Height 167mm Float use 13.6~13.8V Reference Weight 5.5kg Temperature compensation -20mV/
New LG CHEM ESS Li-Ion Solar Storage Batteries available For LG solar storage systems. Can be modified for other uses. Manufactured in 2017 388 units available Model: EM078030P7B1 Battery Type: Li-ion Nominal Voltage: 77.7Vdc Nominal Capacity: 30Ah Minimum Capacity: 29.25Ah Nominal Energy: 2331Wh Manufacturer: LG Chem IP Rating: 20 ICP10/102/354/(1P21S)M/O+40/95