Scarves, poncho, handbags, kaftans.
Hair loss shampoos.
Hazelnuts.
Used clothing, home goods, sporting, electronics goods.
Oil seed, oils and cake.
Fresh fruits especialy mango.
Lubricants.
Neem cake powder.
"It's a kind of multi-span film greenhouse for growing vegetables or flowers. It has following features comparing with other kinds of greenhouse: Less structure use will reduce the structure shadow and provide more even sunlight for the plants. 1) Lower cost than PC and GLASS greenhouses. 2) Better heat retention and absorption in certain regions. 3) We can provide various specifications in terms of span size, bay size, gutter height and roof height. 4) All the systems from cooling system, irrigation system, computer control system and ventilation system, etc. can be provided. We can provide you a turnkey project. 5) For installations, we have professional technicians abroad for guidance. Covering material:?0.15 or 0.2mm plastic filmï¼?single layer filmï¼?double layer filmï¼?inflated double layer film Frame Work:?Double side hot galvanized steel structure General Size:? Span Length: 8m,9m or 9.6m 6) Bay Size:3m, 4m, 5m 7) Gutter Height: 3m, 4m, 5m Note:All parameters are for reference only. Every size and dimension details can be customized. sales14 at uisolar dot com(ANNA CHEN)"
In-circuit Test Probe Pogo Pin PQ100 Series for PCBA Inspection In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe PQ100 series here. Its test center is 100 mil. The diameter is 1.36 mm � and the total length is � 33.25 mm. Various tip styles, for example, H, K, L, BK, etc., are available for test probes. There are four types of receptacles, namely CR, SC, SW and WW, to fit each test probe. For details � please check below parameters. Technical Specifications Recommended Minimum Center: 2.54 mm (100 mil) Current Rating: 3 Amps, continuous Contact Resistance: 30 milliohms Mounting Hole Size: 1.75 mm Full Stroke: 6.35 mm Rated Stroke: 4.3 mm Spring Force: 100/120/156/203/255/284/312 gf (3.5/4/5.5/7.2/9/10/11 oz) Materials Receptacle: Brass, Gold Plated Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Nickel Plated or Gold Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world Welcome to browse our website � and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
Single-ended Probe Pogo Pin P125 Series for PCBA Test In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits. We will introduce in-circuit test probe P125 series here. Its test center is 125 mil. The diameter is 2.02 mm� and the total length is� 33.28 mm. Various tip styles, for example, A, B, U, H, K, L, BK, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, WW and WW-L, to fit each test probe. For details,� please check below parameters. Technical Specifications Recommended Minimum Center: 3.18 mm (125 mil) Current Rating: 3 Amps, continuous Contact Resistance: 30 milliohms Mounting Hole Size: 2.4 mm Full Stroke: 6.35 mm Rated Stroke: 4.32 mm Spring Force: 113/198/255/285 gf (4/7/9/10 oz) Materials Receptacle: Phosphor Bronze, Gold Plated Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Nickel Plated or Gold Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
Harness Probe Pogo Pin CHZ136-H(8.4) for the Tests of Automotive Industry Harness probes are mainly used directly or for the tests of automotive industry. Parts of them are also applied to communication electronics, medical equipment, equipment automation, etc. The standard and requirements for them are high compared with other test probes. Harness probes can be divided into screw-thread harness probes, harness switch probes, non-screw-thread harness probes, position-limited harness probes and high-current harness probes, etc. The CHZ136 harness probe we will introduce here is 1.36 mm in diameter and 33.4 mm in total length. Its barrel is made of brass plated with gold and nickel. The plunger is made of nickel-plated beryllium copper, which is softer but less magnetic than the alternative SK4. The spring inside is made of music wire plated with gold and nickel. This probe can withstand up to the current 3 Amps. Its typical maximum contact resistance is 50 milliohms. It is suggested the plunger be pressed at a distance of 4.3 mm at most when this probe works, although the plunger can move as far as 6.4 mm. Otherwise, the spring inside the barrel will probably be damaged under constant pressure. When the plunger is pressed at a distance of 4.3 mm, its loaded force is about 113 gf, namely 4 ounces or so. Furthermore, the force fluctuates in a range due to the tolerance. Technical Specifications Recommended Current Rating:  3 Amps, continuous Contact Resistance: 50 milliohms Full Stroke: 6.4 mm Rated Stroke: 4.3 mm Spring Force: 113 ±33 gf (4 oz) @ load 4.3 mm Materials (plated) Barrel: Brass, Au on Ni Plated Plunger: BeCu, Ni Plated Spring: SW-A/B, Au on Ni Plated Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. �?� Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal
Practical Steel Wooden Floor Sample Display Showroom Deck Tile Stand for Marble Mosaic Stone Cabinet Boards Ceramic Display 1. Item Number for Modern Custom Countertop Granite Marble Quartz Stone Sample Display for Showroom: TP-292, 2. Display Max Payload: 50kg, 3. Display Plate Thickness: 2mm, 4. Samples Display Quantity: 12PCS, 5. Brand or Logo: can be customized as you request, 6. General Trade Mark or LOGO Treatment: silk printing, stickers and Lazer mark, 7. Overall Dimension: 498x790x1828mm (WxDxH). 8. Generally do not have stock, all models have to produce after payment received, 9. MOQ: 200PCS, 10. Manufacturer Location: Foshan, Guangdong, China. 11. Customized paper carton are accept, 12. Customized design for any kind of steel display stand are accept, 13. Drawings for customized models are needed and shall confirmed before producing, 14. Sample Leading Time: 3 to 7 days after payment received, 15. Bulk Order Leading Time: 30000PCS/25 day after deposit received, 16. General Models' Trade Terms: 30% payment send to us as deposit before producing, balance shall clean before shipping. 15. Customized Models' Trade Terms: 45% payment send to us as deposit before producing, balance shall clean before shipping. 16. If shipping marks are needed, exact descriptions of it are needed, 17. If Adverting billboards are needed, please share us your layouts 18. Warranty: 6 month, About Us: Yizai Metal Works Co., Ltd are dedicated to the quality of our metal craftsmanship, quality and ability to offer comprehensive custom solutions. This has lead us to create exceptional universal carts, racks shelving,furniture and custom products. We specialize in volume custom fabrication that focuses on the customer requirements. Contact us to discuss your specific needs. If it is a material handling, storage or transport product we can provide it and meet your requirements.Yizai Metal Works has operated for over 16+ years. Our product range has covered commercial display standard, warehouse storage rack, household organization, logistics & distribution shelves, retail chain stores, manufacturing facilities. Check out our product line. We offer factory direct shipping and very competitive pricing on volume production orders. Since we do not produce small order quantities, our pricing remains highly attractive and our personal attention to your requirements assures quality and success throughout the process. We are confident you will find us to be the right company to source your steel products. Any product on our website can be modified to fit your specific needs. We also know material handling and can work with you to create the custom fabrication design required.Contact us for more details.
FC2 individual odorless eyelash glue Suitable for grafting by yourself Professional GMP working room for medical grade, solvent free and environmental standard odorless,non-stimulating,non-irritating,strong and fast cure adhesive,non-toxic and lasting *Instruction*: 1. Using the eye mask to protect your eyes. 2. Use the eyelash clip to Shape your eyelash. 3. Put the false eyelash on a paper. 4. Clip the false eyelashes; apply some eyelash glue to it. 5. Each hand with a clip, bond the false eyelash to the natural one. 6. We suggest that use our glue remover when remove the eyelash glue. HANDLING AND STORAGE Handling: . Avoid contact directly with skin, eyes and Steam inhalation. Storage: The glue should be stored under dry and low temperature(The glue quality will be more stable under dry with 0â??),it will be very bad if you stored the glue over 25â?? beyond 60days. Please kindly store the glue under air-condition room with 25â?? if you do not have refrigerator. And you should catch the glue out of refrigerator in half hour before using, and wipe the water away around the bottle, or the glue will be bad quickly if contact with water. *Factory Superiority Developing higher quality and strictly control the production according to the customerâ??s requirement and global environmental protection regulations. Advance Technique: â??Odorlessâ?� and â??HQ Freeâ?� Cyanoacrylate Nontoxic, Harmless (ROHS, REACH,HQ testing report and certification) Developing : Cooperation with University and equipped with independent Labs and development team Longer Shelf life and steady strength within the shelf life(6 month~3 years shelf life) â??GMPâ?� Working Room for the whole production processes Informationize office work & management and distance control the situation of the production and quality processes with video Longer shelf life for 6 months~3 years or above for your selection. Our goal for production is Not only did, but well done, which have come up to 100% full testing so that difficult to find a empty tube or less weight product in a whold container. Difficult to find a leaked or faild glue, the Quality Passing Rate is above 99% which is our absolute advantage in the same field. Harmless and Nontoxic Adhesive(Free of chloroform, dichloromethane, Benzene,toluene, xylene and toxic solvent), Solid content come up to 99.999%, Strength come up to 18-22MPA which is higher twice than some of the same industry thatâ??s also our absolute advantage. The strength of our adhesive will not weak as the time passes if itâ??s still in the shelf life. But the glue strength from some of other factories is always weaken in the harf of the shelf life. We guarantee that itâ??s almost no quality problems if we established the coopeartion which need our strictly production and quality control and management cost.
Model Number: JCSS-004 Material: Tinplate steel Color:Tinplate steel, natural color Packing: Carton Item Name: low price metal strap seal Application: Air catering,duty free,hotel,hospital medical waste disposal,luggage and so on. Strength: >2.5KN Color: 1.According to customers' requests Package 50pcs/plastic bag 1000pcs/carton Printing: 1. Hote stamping or Laser printing 2.Customer's company name&logo, Sequential numbers 3.Bar code is available Company introduction Shandong Junchuang Lock Industrial Limited Company is one of the largest onetime lead seal manufacturersin China, specializing in producing Lead Seals, Cable Seals,Plastic Seals, Meter Box Seals, Bird Prevention Device, Signboard, and Bolt Seals and Container seals. Formally registered in Secretary of Commerce and Industry in 2008, Junchuang has had about 10 years selling experience from then on. Now we have ISO9001, ISO28000 and SGS certificates, and five patent certificates including plastic seal, meter seal,car sealing, plastic bag seal and lead seal. To the quality of survival, to scientific and technological progress, to manage for efficiency, through hard work, Junchuang has developed into a largescale company from an individual one. Having professional equipmentfor Cable seal more than 360 units, with 1 High&Low temperature test cabinet and 1tensile tester and 1 universal tester. Covering an area more than ten thousand square meters, Junchuang has developed into a capable and comprehensive enterprise combinning R&D, design, production and sales. Why Choose Us? 1.Specializing Our company is specializing in the production of various kinds of security seals: high security bolt seals, cable seals, plastic seals, meter seals, metal strap seals and barrier seals, etc. 2.Variety The company produces various kinds of security seals, various types, shapes and sizes of the seals, in order to meet your different needs. 3.Quality Controlled The company is considering.â?�Quality First, Service First" 4.Favorable Price We will provide you favorable and reasonable price! The larger quantity,the more discount. 5.Timely Delivery No matter how small or big your order is, timely delivery is our long-term goal! 6.Special Customized At the same time, we provide customizing service, if all of our products cannot meet your requests, we also can specially customize the products for you as per your samples, drawings, etc. Our service 1)Any inquires will be replied in within 24 hours. 2) Samples production and delivery service can be provided. 3) OEM/ODM is available. 4) All products have been strictly quality test in our factory before packing
PRACTEC Basic functions of PRACTEC - Support plasma & flame cutting modes; - Support high power plasma power source; (Hypertherm Maxpro200, Victor UC200, UC300, TopTech JCH200A, etc.) - Auto plasma torch height control, AVTHC; - Anti-collision plasma torch holder; - Multiple flame torches cutting. Special functions of PRACTEC - Support High Power plasma power sources; - Support pipe cutting requires; - Support drilling and cutting requires; - Support 2 plasma torches cutting requires. Advantages of PRACTEC - Gantry type double drive structure; - High accuracy rack and pear transmission; - Steel structure of whole machine guarantee high accuracy, easy for maintenance; - Professional CNC cutting system with high integration can guarantee accuracy controlling and stable running requires. Standard Main Parameters of PRACTEC Machine type PRACTEC-3500 PRACTEC-4000 Machine width 1100mm 1100mm Machine length 4513mm 5013mm Machine height 1560mm 1560mm Effective cutting width Single torch: 3000mm Single torch: 3500mm Double torches: 1st torch: 2885mm 2nd torch: 2875mm Double torches: 1st torch: 3385mm 2nd torch: 3375mm Machine transmission Gear/Rack Gear/Rack Cutting modes Plasma or flame Plasma or flame Input voltage AC220V/ other universal single phase input voltage Input power 4KW 4KW Controller RATE Series 2500 RATE Series 2500 Bearing Japanese NSK, TNT Japanese NSK, TNT Reducer Taiwan high precision planetary reducer AV THC system RATE Series AVTHC system RATE Series AVTHC system Max cutting speed 10000mm/min 10000mm/min Position accuracy �±0.5mm/10m �±0.5mm/10m Speed control accuracy ±1% ±1% Company Introduction Beijing TopTech Technology Co., Ltd. was founded in Beijing, the capital and main transportation city in China. With more than 10 years experience in welding and cutting industry, we had R&D our advanced welding and cutting equipment. Mature teams, included sales team, marketing team, production team and after-service team, supply professional service for customers. Strictly follow ISO 9001:2000 world quality management system. Beijing TopTech Technology Co., Ltd. products include plasma cutting machine, laser cutting machine, CNC cutting machine, flame cutting machine, portable cutting machine, gantry cutting machine, laser carving machine, high definition plasma cutting machine, bevel cutting machine, plasma cutter. Contact TopTech W:www.toptechone.com E: info@toptechone.com sales@toptechone.com bill@toptechone.com A: No. 69 Yangzhuang Street, Shijingshan District, 100043, Beijing, China T: +86-10-6865 3022
China Manufactures Chemical Experiment Rotavapor Introduction: Chemical experiment rotavapor is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.The apparatus are particularly suitable for the heat-sensitivity material's condensation, crystallization, separation, recovery and so on.Widely used in chemistry, pharmacy, lab and biology. 1. AC motor, stepless speed regulation, no brushes, no sparks, long life; 2. Water(Oil) bath mannal lifting, easy and quick operation; 3. High borosilicate glass, good physical and chemical properties; 4. Frequency control and digital speed display; 5. PTFE sealing parts, tight sealing, high vacuum degree, high evaporation rate and recovery rate; 6. Teflon heating bath, even temperature, fully enclosed design. Tips: All the lab vacuum distillation unit below can be make in 110~120 voltage. Picking: -Chemical experiment rotavapor glass parts will be wrapped with foam, then put into the carton; the mainbody portion will be packed in wooden cases. -Both neutral and customized packaging can be available. Shipping: Usually we ship the goods by one of three methods as below. You can choose the most appropriate one according to your timeline and budget. Shipping by your own shipping agent is acceptable. Shipping Method Note By express Door to door, very convenient, don't need to do customs clearance or pick-up By air to the airport Airport to airport, you need to do customs clearance and pick up the goods at your local airport, which you can have a local shipping agent to do for you. By air and dispatch Airport to door. You need to cooperate with our shipping broker to do customs clearance and don't need to pick up at the airport. Henan Touch Science Instruments Co., Ltd Founded and based in Henan, China, Touch Science is is a professional manufacturer and exporter that is concerned with the design, development and production of lab equipments, in the areas of heat treatment and material processing for universities, research facilities and labs. We have more than 15 years of manufacturing experience with the chemical experiment rotavapor, glass reactors, drying ovens, chillers, water ring vacuum pumps, and other lab instruments. We have gained a global sales network reaching USA, Canada, Europe, Chile, Japan, India, etc. We attach importance to every customer and every order. 100% customer satisfaction is always our first priority. We provide quantity discounts and will reply to your requests within the same business day. Our goal is to build up business partnerships with friends around the world. Contact person: Tina Email: tina(@)touch-science.com Tel/What'sapp: +86 13393723769 Instagram: ts.tina.sun Phone: 86-371-86051511 Henan Touch Science Instruments Co., Ltd Add: Room 2109, #56 Zijingshan Road, Guancheng, Zhengzhou, Henan, China
Class Rotary Vacuum Evaporator RE-5002 with PTFE Sealing Introduction: Class rotary vacuum evaporator RE-5002 is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation.The apparatus are particularly suitable for the heat-sensitivity material's condensation, crystallization, separation, recovery and so on.Widely used in chemistry, pharmacy, lab and biology. 1. AC motor, stepless speed regulation, no brushes, no sparks, long life; 2. Water(Oil) bath mannal lifting, easy and quick operation; 3. High borosilicate glass, good physical and chemical properties; 4. Frequency control and digital speed display; 5. PTFE sealing parts, tight sealing, high vacuum degree, high evaporation rate and recovery rate; 6. Teflon heating bath, even temperature, fully enclosed design. Tips: All the lab vacuum distillation unit below can be make in 110~120 voltage. Picking: -Class rotary vacuum evaporator RE-5002 glass parts will be wrapped with foam, then put into the carton; the mainbody portion will be packed in wooden cases. -Both neutral and customized packaging can be available. Shipping: Usually we ship the goods by one of three methods as below. You can choose the most appropriate one according to your timeline and budget. Shipping by your own shipping agent is acceptable. Shipping Method Note By express Door to door, very convenient, don't need to do customs clearance or pick-up By air to the airport Airport to airport, you need to do customs clearance and pick up the goods at your local airport, which you can have a local shipping agent to do for you. By air and dispatch Airport to door. You need to cooperate with our shipping broker to do customs clearance and don't need to pick up at the airport. Henan Touch Science Instruments Co., Ltd Founded and based in Henan, China, Touch Science is is a professional manufacturer and exporter that is concerned with the design, development and production of lab equipments, in the areas of heat treatment and material processing for universities, research facilities and labs. We have more than 15 years of manufacturing experience with the class rotary vacuum evaporator RE-5002, glass reactors, drying ovens, chillers, water ring vacuum pumps, and other lab instruments. We have gained a global sales network reaching USA, Canada, Europe, Chile, Japan, India, etc. We attach importance to every customer and every order. 100% customer satisfaction is always our first priority. We provide quantity discounts and will reply to your requests within the same business day. Our goal is to build up business partnerships with friends around the world. Contact person: Tina Email: tina(@)touch-science.com Tel/What'sapp: +86 13393723769 Instagram: ts.tina.sun Phone: 86-371-86051511 Henan Touch Science Instruments Co., Ltd Add: Room 2109, #56 Zijingshan Road, Guancheng, Zhengzhou, Henan, China
INSTRUCTION The Lizard-100 series are compact portable borescopes that allow users to execute inspection in restricted spaces which could not be directly observed with naked eyes. The PMI Lizard-100 series set includes a portable device, a camera tube, a cleaning kit, a power adapter, a video connector, and a 4GB SD card. The portable device with 4.8� TFT LCD screen is capable of viewing, capturing and reviewing photos and video images. Images can also be displayed directly on a TV screen. The portable device is powered by rechargeable Li-Ion battery and a universal charger is included. FEATURES Super wider angle camera Digital signal with high resolution, VGA (640 x 480 pixels) 4.8" Wider screen Quick snap/ Video recoding Special design marked scale on probe to measuring Waterproof & Grease proofing Comfortable TPR handle Image editor software Portable Device Designation Lizard-100 Display 4.8" TFT LCD, 800 x 400 Pixels Display Strength Tempered Glass Interface Micro USB 2.0 / AV out Battery Rechargeable Lithium Battery (3.7V) Power adapter 100~240V AC in, 50/60Hz 0.12 A 5.0V DC out, 0.85A ~ 1A Recording Medium Free 4G SD card Photo Storage Format JPEG (640 x 480) Storage Capacity Up to 20,000 pictures or 480 min. of video on 4 GB card Video Recording Format AVI (640 x 480) Video Out Format NTSC & PAL Frame rate 30 fps Compression Format MPEG4 Video size 10 min. (150 MB) Working& Storage/ Battery charging temperature range -10 ~ 65 °C (14 ~ 149 °F) Functions Snapshot, Video recording, Images (Photo & video) review on LCD screen, TV out, Transfer of photo & video from SD card to PC, Digital zoom Magnifier 3 x Battery Life 3 hours Ingress Protection IP 54 Camera tubes Designation US40 Series Us45 Series US50T Series UH50T Series Tube type Semi-Rigid Hose Tube Surface Treatment EPD /PE Cover PVC Cover Image sensor CMOS Image Sensor Resolution VGA (640 x 480 pixels) Light Source 6 adjustable white LED s Size tip diameter 4.0 mm 4.5 mm 5.0 mm Tube length 1m, 2m, 3m 5m Field of View (FOV) 80 ° Depth of Feild (DOF) 1 cm ~ 10 cm Resistant to water & fuels Yes (For most fuels and solvents) Min bending radius 50 mm Working temperature range -10 ~ 65 °C (14 ~ 149 ° F) Ingress Protection IP 67 Marble Endoscope
Technical Parameters Method of Display 7 inch color touch LCD with English display Method of Testing MPU controlled electrolysis(Karl Fischer Coulometric Method) Rate of Electrolysis 2.4mgH2O/min Electrolysis Current Auto-control within 430Ma Testing Range 0.01ugH2O-200mgH2O Water Content Range 0.0001%(1ppm)—100% Sensitivity 0.01ugH2O Accuracy Water Content: 2ugH2O-100ugH2O; Deviations=±1ug, Water Content: 100ugH2O-1000ugH2O; Deviations=±2.9ug, Water Content: >1000ugH2O; Deviations=±0.2%(excluding deviations of sample injection) Drift Compensation Auto-control via MPU Stirring Speed Adjustable and steerable End-point Indication LCD display /output via printing / voice warning / end-point indication light Data Input Input via touch screen Sample Number Numbered by users Storage Infinite storage capacity Printer Thermal printer, high-speed, low-consumption, with 44 millimeter-wide paper Printing Content ug / ppm / mg/L / sample number /experimenter / date Calendar/Clock automatic display and print analyzing time and date Self-checking Breakdown self-checking Special Function Work independently or connected with laptop or other computers Power Consumption
