Introduction The d2hb542ma is an economical microstepping driver based on patented technology of longs motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors .By using the advanced bipolar constant-current shopping technique , it can output more speed and torque from the same motor, compared with traditional drivers , such as l/r drivers .Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved. Features Low cost and good high-speed torque Supply voltage up to +45vdc Output current up to 5.86a Optically isolated input signals Automatic idle-current reduction 14 selectable resolutions Suitable for-2-phase and 4-phase motors Dip switch current setting 8 different values Pulse frequency up to 200khz Dip switch current setting 8 different values Small size (122.2*90*33), weight:0.3kg
Electric drive&aerodynamic solutions ,hvls fans,exhaust fans,suction fans,torque motors,bldc motors.
Electromagnetic brakes slow or stop motion using electromagnetic force to apply mechanical ... These brakes are typically used on or near an electric motor. 1 Flange Mounted Brake: Salient Features Simple Construction & Installation, Simple Wear Adjustment of Brake, Brake with Dust Protection Ring & Manual Release Provision, Adjustable Brake Torque 2 Tefc Foot Mounted Motor: Salient Features Simple Construction & Installation, Simple Wear Adjustment of Brake, Brake with Dust Protection Ring & Manual Release Provision, Adjustable Brake Torque
Place of Origin:Guangdong, China Brand Name:rawsuns Model Number:RMHD3500 Type:Synchronous Motor Phase:three-phase Certification:ce Protect Feature:IP67 ISG motor power:75kw rated / 100kw peak Traction motor power:80kw rated / 140kw peak ISG motor torque:355Nm rated / 750Nm peak Traction motor torque:750Nm rated / 1700Nm peak max output torque:3455Nm max input torque:1300Nm
Place of Origin:China Brand Name:rawsuns Model Number:RMHD2100 Type:Synchronous Motor Phase:three-phase Certification:ce Protect Feature:IP67 Efficiency:95% total weight:296kg ISG motor power:100kw rated / 180kw peak TM motor power:80kw rated / 150kw peak ISG motor torque:260Nm rated / 450Nm peak TM motor torque:750Nm rated / 1700Nm peak max output torque:2100Nm
EK-Quantum Torque Micro Rotary adapter fittings allow you to make a simple 90 turn in the smallest possible footprint and installation height. With an overall installed height of just 21mm, Torque Micro Rotaries can squeeze into the most difficult places where it would be otherwise impossible to make a bend. This means it is 10mm lower in height than the standard 90�° EK-Quantum Torque Rotary angled fitting.
3 people JET SKI Maximum people on board 3 Maximum load capacity 240kg (539.1lb.) DIMENSIONS Length 133.8 (3.36m) Width 48.8 (1.24m) Height 48.0 (1.21m) Net Weight 375kg Package size 3.506x1.171x1.318M ENGINE Engine type 4 stroke Number of cylinders 4 Engine displacement 1812cc r/min 7500RPM Bore & Stroke 86-78 Compression Ratio 11.0:1 Lubrication system Dry sump Cooling system Water cooled Start system Electric starter Max speed 105km/h DRIVE UNIT Propulsion system Jet pump Jet pump type Axial flow,single stage FUEL AND OIL Recommended fuel Regular unleaded gasoline Fuel tank capacity 70L Engine oil quantity 4.5L Fuel consumption 27L/h
Rawsun motor controller is mainly used in the control of permanent magnet synchronous motor for new energy vehicles. The main technical characteristics are as follows: * Using 32-bit DSP as the main control chip. * Using automobile IGBT module, it has the characteristics of low temperature rise and low EMI. * Compact, robust and unique waterway design based on vehicle reliability. * Efficient energy recovery control. * With perfect protection of under-voltage, over-voltage, over-current, over-temperature, over-speed, etc. * Precise motor torque control, low speed anti-jitter processing. * Standing on the slope function, starting on the slope without hand brake can start smoothly, the distance of the car is less than 20 cm (Note: Selected for the use of motor controller). * Efficient Energy Recovery Control Strategy. * Intelligent Variable Carrier Control to Further Improve the Reliability of Controller at Low Speed. * Intelligent identification of motor parameters. * Support electronic throttle, fault display, gear control and other functions. * Support CAN2.0 communication protocol, data monitoring and parameter modification through CAN bus. ********* Place of Origin:China Brand Name:Rawsuns Model Number:RMC120 Rated Power:80KW Peak power:120KW Max output continuous current:200A Max output peak current:400A High volt input range:260-720 VDC Low volt input range:9-32 VDC Cooling type:Water cooled Peak efficiency:97% Weight:11.5Kg Dimension:380mm*280mm*98mm
Electromotor Motor features: Utilise ip44 enclosure, ip54 and ip55 is available on request Class b insulation with class f on request Motors are made with ic0141 cooling Motors are made for continuous s1 duty Motors have high start torque Motors have high efficiency Y connection to 3 kw Connection from 4 to 315 kw Voltages on request (220/380v, 380/660v, 220/340v, 220/440v, 400/415v) Frequency 50 or 60 hz Carton packing
NEMA Series Standard Single Phase Asynchronous Motor desiged and manufactured according to USA NEMA standard and Canada standard, NEMA series single phase asynchronous motor has the strong points like novel pattern, excellent technics and reliable performance. The motor features by low temperature rise, low noise and vibration, as well as high efficiency. The voltage of the series motor is 115/230V, and the frequency is 60HZ. Among the series of motors, the capacitor start and two-valued capacitor motor is suitable for air compressor, small machine tool and other fields requiring higher starting torque. The capacitor-running motor is suitable for ventilation, medical instrument and the fields of light and none loading start. Standard lot size , weight , dimensions
Place of Origin : Dongguan China Brand: X-TEAM Item Model : 3650 Rated power :1300(W) Product Type ; Brushless DC Motor Rated Voltage 15V(V) Dimensions 36x50(mm) Product Certification : CE FCC RoHS 3C rated voltage range DC below 36V Compatible Scale: 1:10, 1:12 Fuel Source: Electric Feature: 4 pole 12-slot hi-torque motor design. CNC machined 6061 aluminum motor case. Fits 1/10 or 1/12 scale cars. Verify motor dimensions for proper fit with your vehicle before purchasing. Descriptions: IO: 3.7A KV(RPM/Volt): 5200 Max RPM: 50000 Max Amps: 94A Max Voltage:
Nema Standerd Submersible Pumps And Motor Available 4" & 6" Submersible Motors & Pumps with NEMA Standerds. Available Customised Design For OEM Supply Also. SALIENT FEATURES: Easy To Install, Highly Efficient Motor & Pump, Law Power Consumption, Specially Design For Wide Voltage Range, Corrosion Resistance Stainless Steel Motor & Pump Body, Use Graded Varnish To Reduce Corrosion In Stator, Rotors Are Dynamically Balanced With More Than 2850 rpm To Reduce Vibration, Long Life And Negligible Maintenance Due To High Precision Work, Rotor Are Painted With Special Epoxy Paint For Prevent Corrosion Effect For Long Time, Noiseless & vibration free motors, All Parts Machined On CNC Machine Only
V6 Submersible Motors (Nema Standerd) MATERIAL OF CONSTRUCTION: MOTOR: Motor Shaft : AISI 420 / AISI 410, Thrust Bearing : Carbon Plate With S.S. Segment (With Tilted Pads), Stamping : Silicon Steel, Casting Parts : Graded Casting , Copper : E.C. Grade Copper (99.9% Purity), Bush : Laded Tean Bronze (LTB-4) / Carbon Bush, Fastners : Stainless Steel, Rubber Parts : NBR, Rotor Type : Copper / Aluminium SALIENT FEATURES: Mounting Diameters Are As Per NEMA Standard, Rotor Are Dynamically Balanced At 2850+ rpm For Reduce Vibration & Noise, Rotors Are Painted With Special Epoxy Paints To Prevent Rust, All Casted Parts Available With Special Coated Paint & Also With CED Coating In Casting Parts, Design With Mechanical Seal Or Oil Seal, Special Design For Wide Voltage Range, Design High Efficient Motors , High Quality Materials And CNC Machined Component Ensure More Reliability And Better Performance,. Customised Models Available As Per Request.
This rear-drive motor has a rated power of 350 or 500W and a maximum torque of 60N.m ideal for sportive eMTBs, touring and commuter eBikes. Compatible with disc brakes and with In Tube, a geared hub motor has gearing inside it to reduce the high speed of a fast and efficient motor to the low speed of the wheel. Aikema is dedicated to providing the very best quality motors and service.We strive to be the best in the industry and innovate our products. 100SX 100 R250 BBC A3 High Efficiency, High Torque Rear Wheel Hub Motor Rated Power (W) : 250 Rated Voltage (DCV) :24,36,48 Wheel Size(Inch) :20"-28" Max Torque(N.m) :50 N.m Efficiency (%) : 80 Weight (kg) : 2.1 Speed(km): 25km/h Noise Grade (dB) :
Excavators, vehicles, road roller, golf carts, atvs, elevators, vehicles and spare parts.
Hydraulic motor like industrial hydraulic motor, low speed high torque hydraulic motor, high speed hydraulic motor, low rpm hydraulic motor.
Radial Piston Hydraulic Motor, Low Speed High Torque Hydraulic Motor..
The Higglunds CBP motor series is an exceptionally powerful motor series. It has all the advantages of Higglunds direct drive hydraulic motors. It is not only small in size, but also light in weight and extremely powerful in output power. It is by far the largest series of Higglunds motors in power (power-to-weight ratio) and can run continuously at higher powers. It is available as flange mount or torque arm mount, all motors are splined and can be provided with through holes. Since this motor can be driven at higher speeds and has a higher efficiency, this motor family opens up new drive solutions for new applications.