We are manufactured all equipment such as surgical equipment dantel equipment babar kit nd beauty toolz and all kind of scissorz in best quality. nd we need clients for my products t.t paymnt by air
Product Description IES Ideal End Suction Pump IES Series is single stage, single suction back pull out type Dimensions are according to EN733 (DIN24255) standard Flange can be drilled according to ISO, DIN, BS or ANSI standard Shaft with mechanical seal as standard and gland packing optional Materials available (Cast iron, Ductile iron and SS316 etc.) Performance Range Flow Rate (Q) Up to 1100 m3/h Head (H) Up to 152m Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ) Temperature -10 Celsius to 105 Celsius, (Optional 130 Celsius) Applications HVAC & Cooling Tower Fire Fighting Chemical Liquid Transfer Irrigation & Agriculture Booster & Pressurization Set Definition of Model IES 65/20 IES - Single Stage, End Suction Pump 65 - Discharge Diameter (mm) 20 - Impeller Nominal Diameter (mm)
G.T. Universal marketing co., ltd. has been a professional various of industry products supplier for 19 years in taiwan. Taiwan hardware showrooms is a manufacture sourcing website of hardware fastener. We offer all kind of hardware products such as screws, bolts, nuts, nail, washers, allen keys, auto parts, rubber products.
G.T. Universal marketing co., ltd. has been a professional various of industry products supplier for 19 years in taiwan. Taiwan hardware showrooms is a manufacture sourcing website of hardware fastener. We offer all kind of hardware products such as screws, bolts, nuts, nail, washers, allen keys, auto parts, rubber products.
quad rams slickline BOP/wireline BOP Lubricator & riser sections are pressure retaining cylinders used during well intervention operations, for tool deployment. Sections can be made-up together with an appropriate sealing device, to form an effectual operating height to retain the tool string complete with sub-surface deployment tool(s) being run or Retrieved from the well. options The TIS lubricator and riser section range is available with the following options : 3" ID to 9" ID through bores 3ft to 20ft length options 5,000 Psi, 10,000 Psi and 15,000 Psi working pressures Standard or sour service Service temperature range of -29 to +121 °C Choice of quick union or API flanged connections Choice of bleed port connections -
Fibreglass Reinforced Plastic FRP fittings It is a general name of the spare parts which play such functions like connecting, controlling, burning, diverting, sealing, supporting, etc. in a fibreglass pipeline system. Production range: Diameter: DN40-DN4000; Pressure rating: 0.1Mpa-25Mpa. Product standards: SY/T 6267-2006 Specification for high pressure fibreglass line pipe SY/T 6266-2004 Low pressure fibreglass line pipe and fittings Range of application: Oilfield: oily water transmission; crude oil transmission; Chemical: corrosion-proof pipeline for chemical plants; pipelines for power plants; Municipal works: used for municipal water supply and urban drainage; Other: internal components of GRP vessels, etc. Product characteristics: Excellent physical properties, light weight and high strength; Good corrosion resistance and long service life; Stable chemical structure and no secondary contamination; Good insulation performance and good design ability; Low heat conductivity coefficient and low heat loss; Very smooth inner wall and excellent hydraulic properties; No buildup of scale and wax, saving maintenance costs; Easy installation and low comprehensive costs. -
1. Structure of FRP Process Pipe Description 1) Anti-fouling, anti-moth, non-rust, keeping water from pollution; It also apply to carry the polluted water, slurry and seawater; 2) The ability of water resistance and corrosion resistance can prolong product service life; 3) The connection of insert makes air proof excellent; project cost can be reduced without building concrete protect layer; 4) Few joint and various of joint methods not only reduce water resistance but also project cost; 5) Good insulation, heat resistance, combustration resistance; No distortion in high temperature of 80-100 degree; 6) With light weight, high strength, the hoisting cost can be decreased, also expedite installation proceeding; 7) Low maintenance expense: no need for anti-rust, anti-pollution, insulation, heat preservation and the relative examination and repair; cathode protection free also can save the project maintenance cost. -
We M/s. Mughal Impex are manufacturer & supplier of following items. SURGICAL INSTRUMENTS Single Use & Re Usable. Gynecology Instruments, Hollow ware Products, Forceps and scissors. Etc. DENTAL INSTRUMENTS Orthodontic Pliers, Extracting Tooth forceps, Impression Trays etc. Please visit our website www.mughalimpex.com to see above mentioned items. We have been working in this field since 1980 and supplying our product all over the world. We also have our company representative person based in Australia Sydney and in America Dallas who is looking after our clients there. Our goal is to provide high quality and cost-effective instruments. We pledge to provide you with finest in materials from forging to the final packing. Please send us your requirements to get our very competitive prices and samples if needed.
LDD-S-SM2 Lab Muller (Sand Mixer) is for mixing molding sand and core sand in sand laboratory. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-ID Double Disk Infrared Dryer is used for rapid drying the sand sample to be tested its water content. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-HT Mold Sand Surface Hardness Tester is used to test the hardness of mold (core) sand surface. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-RSM Resin Sand Sample Making Machine is for the production of standard resin sand sample to determine the permeability, compression, shear, tensile strength and thermal stability and other physical properties. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-SSM2 Intelligent Hydraulic Sand Strength Machine is capable of running many different strength properties tests of the green sand, resin sand, resin coated sand and sodium silicate-bonded sand specimens. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-PT2 Electric Permeability Tester is used to determine the permeability of mold and core sand in dry and wet conditions. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-SR Sand Rammer can be used to prepare a standard 50mm x 50mm AFS sand specimen and to determine the compactability of prepared molding sand. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-TF Tube Filler is used to assist in filling the specimen tube for the compactability test. More details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
LDD-S-SS Electromagnetic Micro Vibrating Sand Sieve is used to determine the fineness of foundry sands. Details available on request. More sand testing equipment available on request. Metallographic lab equipment available on request.
Nitrogen - 46% 1) Bulk 2) 50Kg Packing 3) 1 ton packing
99% Citronella oil , JAVA type 1)50 kg pack
All different types of gas welding equipments and accessories from victor Lcl or fcl