Hand Block Printed Cotton DOHAR (Single) | Blue Elephant & Umbrella SKU: DO_S_014 ?2,250 Dohar is a traditional Indian summer blanket comprising of three sheets of Mulmul - an airy, ultra-breathable cotton muslin once exclusive to royalty. These Dohars are made by placing a sheet of flannel between two hand block printed sheets of cotton. Size : 60 x 90 inches Material : 100% Cotton (Mulmul, South Mill) Thread Count : 80 x 80 x 100 x 80 Hand block printed, may have minor imperfections in the print which is emblematic of hand block printing and should not be considered as defects. Preferably dry clean. Gentle hand / machine wash with mild soap / detergent and cold water. Do not wring. Dry in shade. Recommended Buy Quantity : TWO i.e a Pair
Hand Block Printed Cotton DOHAR (Single) | Deep pink flower bush SKU: DO_S_013 ?2,250 Dohar is a traditional Indian summer blanket comprising of three sheets of Mulmul - an airy, ultra-breathable cotton muslin once exclusive to royalty. These Dohars are made by placing a sheet of flannel between two hand block printed sheets of cotton. Size : 60 x 90 inches Material : 100% Cotton (Mulmul, South Mill) Thread Count : 80 x 80 x 100 x 80 Hand block printed, may have minor imperfections in the print which is emblematic of hand block printing and should not be considered as defects. Preferably dry clean. Gentle hand / machine wash with mild soap / detergent and cold water. Do not wring. Dry in shade. Recommended Buy Quantity : TWO i.e a Pair
Hand Block Printed Cotton DOHAR (Single) | Pink & Blue bushes with Parrot SKU: DO_S_012 ?2,250 Dohar is a traditional Indian summer blanket comprising of three sheets of Mulmul - an airy, ultra-breathable cotton muslin once exclusive to royalty. These Dohars are made by placing a sheet of flannel between two hand block printed sheets of cotton. Size : 60 x 90 inches Material : 100% Cotton (Mulmul, South Mill) Thread Count : 80 x 80 x 100 x 80 Hand block printed, may have minor imperfections in the print which is emblematic of hand block printing and should not be considered as defects. Preferably dry clean. Gentle hand / machine wash with mild soap / detergent and cold water. Do not wring. Dry in shade. Recommended Buy Quantity : TWO i.e a Pair
LV-17 Y-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: +ASME B16.5 for 24" & below size +ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) +API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: +ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
LV-18 B-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: + ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: +ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
LV-19 T-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: - ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
LV-20 D-Strainer + Basic Design: Manufacture Standard + Body Wall Thickness: ASME B16.34 + Pressure Rating: ASME B16.34 + Face To Face: Manufacture Standard + Body Bore Size: ASME B16.34 + Marking System: MSS-SP-25 + End Connection: - ASME B16.5(Raised Face) / - ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 + Finishes For Contact Faces of Flanges: - ASME B16.5 or MSS-SP-6 + Option: - Drain Plug(ASME B16.34 / MSS-SP-45) - Threads(ASME B1.20.1)
Installed an isolated cooling fan in the interior of motor to dissipate heat. Make the machine can be operated continuously,steady and durable. The vertical column is enlarged (60mm),vertical column is solid and treated by tempering to get rid of stress, surface is chrome plated, wear resisting and no rust. High speed rotation continuously which can rotate 50 times/per Minute. Free to exchange tiny pitch. Quick and easy to change gear pitch and collet. Gear drives by one side teeth so won't have gap there. The rotation of gear is slow, so the gear won't get wear. Because one rotate one pitch, it can process perfect thread and prolong the TAPs life. The workpiece won't be lifted while the spindle retracting, so don't need to keep pressure on the workpiece, only need to avoid anti-rotation when tapping. This can simplify the fixture and make cost down.
Standard ANSI/ASME, JIS, EN, DIN, BS,GB, SH, HG, IFI, ISO and etc. Size :Standard & non-standard, support customized Material Carbon Steel, Stainless Steel and etc. Grade SAE J429 Gr.2, 5,8; ASTM A307Gr.A, Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 and etc. Thread UNC,UNF,BSW Finish Plain,ZincPlated(Clear/Blue/Yellow/Black),Black,HDPE,Fluorocarbon Coating, Packing Bulk in cartons on wood pallet or according to customer special demand. Application Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy; Mechanical Machine; Automobile: Supply Ability:About 100 tons per month MOQ Not limited Trade Term FOB/CIF/CFR/CNF/EXW/DDU/DDP Payment T/T, L/C ,D/P , Western Union ,etc
Item:Hex Head Bolt & Stud Bolt Size :Standard & non-standard, support customized Material Carbon Steel, Stainless Steel and etc. Grade SAE J429 Gr.2, 5,8; ASTM A307Gr.A, Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 and etc. Thread UNC,UNF,BSW Finish Plain,ZincPlated(Clear/Blue/Yellow/Black),Black,HDPE,Fluorocarbon Coating, Packing Bulk in cartons on wood pallet or according to customer special demand. Application Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy; Mechanical Machine; Automobile: Supply Ability:About 100 tons per month MOQ Not limited Trade Term FOB/CIF/CFR/CNF/EXW/DDU/DDP Payment T/T, L/C ,D/P , Western Union ,etc
LED SMD SLIM Floodlights are a great step forward in the lighting industry. Their energy consumption is much lower and performance is often higher than that of all other widely used types of fixtures. Our floodlights can be mounted directly to electrical boxes or to poles with ½” threaded inserts. Our SMD LED chips used in LED SMD SLIM Floodlights are very reliable and produce bright, even, consistent light. LED SMD SLIM Floodlights are universal, contemporary and are widely used in residential and commercial applications such as yards, driveways, landscape lighting, walkways, parking lots anywhere you need bright consistent light. Specifications Size : 50W | Color Name: 6500K (Daylight ) Voltage100-277volts Product Dimensions22.2 x 6 x 15.2 cm Wattage50W Color6500K (Daylight ) MaterialMetal ShapeSquare Power Sourcecorded-electric Item Weight6.67 kg Type of BulbLED Special FeaturesWaterproof CertificateUL Listed
VALVE HOSE CONNECTIONS 3/4" BSP MESH GAUZE FILTER WASHERS Filter Washers & Strainers Filters & Baskets Hose Rubber Filter Washer FEATURES TAP SHOWER VALVE HOSE CONNECTIONS 3/4" BSP MESH GAUZE FILTER WASHERS Hose Thread Filter Washer We are a filter strainers, filter washers hose rubber filter washer supplier, we have our own factory, so we can give you a cheap price! YMX FILTER MANUFACTURING CO., LTD is a custom fabricator of series of wire screen, cone strainers and woven wire cloth products. For more than 20 years' experience, we are serving customers from a wide range of industries from all over the world. If you are interested in custom wire screen, you can click here to browse our website.
We are a filter elements supplier in China, plain weave stainless steel wire mesh and weave wire mesh are our main product. Our company is a leader in the industry and we will not disappoint you. More information you can view here Stainless steel wire mesh Weave Style plain weave Material 304, 316, 316L or customized Weave style plain weave, twill weave and dutch weave Type weave wire mesh, wire cloth, filter elements custom Stainless Steel Wire Mesh Application screen, filters, woven wire mesh Technique woven Mesh Count 1x1-635x635mesh/inch Thread Diameter 0.008-0.08inch (0.0203-2.03mm) Mesh Opening 0.0008-0.92inch(0.0203-23.37mm) Commonly Roll details 30m length X 1m width (length and width can be customized)
Stainless steel wire mesh We are a filter elements supplier in China, plain weave stainless steel wire mesh and weave wire mesh are our main product. Our company is a leader in the industry and we will not disappoint you. More information you can view here Stainless steel wire mesh Weave Style plain weave Material 304, 316, 316L or customized Weave style plain weave, twill weave and dutch weave Type weave wire mesh, wire cloth, filter elements custom Stainless Steel Wire Mesh Application screen, filters, woven wire mesh Technique woven Mesh Count 1x1-635x635mesh/inch Thread Diameter 0.008-0.08inch (0.0203-2.03mm) Mesh Opening 0.0008-0.92inch(0.0203-23.37mm) Commonly Roll details 30m length X 1m width (length and width can be customized)
Type Available: Brass Male Inserts & Brass Female Inserts for PPR Fittings. Special Shapes / Designs available. Size: 3/8 , 1/2 , 3/4 , 1 , 1.1/4 , 1.1/2, 2 , 1.1/2 , 3 , 4 , 5 - As per Go Not Go Gauges & Deep Groove for maximum Pull Out Resistance Standard & Specification: Developed specifically as per customers mould design& requirements Threads: BSP, BSPT, UNF & NPT Finish & Coating: Natural Finish, Nickel Plated, Chrome Plated Material Specification: CW614N (CuZn39Pb3), CW617N (CuZn40Pb2), CW602N(CuZn36Pb2As), CW511L (CuZn38As), Cuphin (CuZn21Si3P) or as per customer requirement. * No-Lead manufacturing also available.
Pipe Type : Seamless pipe, Seamless Carbon Steel pipe, Carbon steel seamless pipe Application : For high temperature Fluids Transmission (oil, gas, water ,steam etc) Specs: OD: 1/8--48(10.3-1219mm) WT: SCH 10-160, SCH STD, SCH XS, SCH XXS LENGTH: Fixed length (5.8/6/11.8/12 m), SRL, DRL Standard & Grade : ASTM A 106, Grade A/B/C Ends: Square Ends / Plain Ends(straight cut, saw cut, torch cut), Beveled / Threaded Ends Surface: Bare, lightly Oiled, Black/Red/Yellow painting, Zinc/anti -corrosive coating Packing: Bundled/ in Bulk, plastic caps plugged, waterproof paper wrapped
1.Place of origin: Yuhuan Zhejiang China 2.stainless steel keg coupler without vent vale D type.Place of origin: Yuhuan Zhejiang China 3.Handle can be any other colors and be printed other logos if requested. 4.304 stainless steel can work under the temperature of -270~400 long-term security circumstance, either high temperature or low temperature, will not release harmful substances, material properties are fairly stable. 5.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 6.Technical parameters: Body: stainless steel Operating temperature: 0-100 degree centigrade Operating pressure: 0,5Mpa thread: G5/8
1.Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 2.stainless steel keg coupler without vent vale A type is used to connect beer keg and beer tap. Cleaning Notes: cleaning the surface with mild soap water, and then thoroughly wipe the entire surface with a clean soft cloth. 3.Technical parameters: Body: stainless steel Operating temperature: 0-100 degree centigrade Operating pressure: 0,5Mpa thread: G5/8 4.Place of origin: Yuhuan Zhejiang China 5.Handle can be any other colors and be printed other logos if requested. 6.304 stainless steel can work under the temperature of -270~400 long-term security circumstance, either high temperature or low temperature, will not release harmful substances, material properties are fairly stable.
Hot sale scrap turning tungsten CNC carbide inserts in Turning Tool Carbide inserts are to be welded onto the holder, used on the lathe for the machining of various materials such as cast iron, steel, stainless steel, nonferrous metal etc. A versatile cutter which can be used for many types of grooves, threads and chamfers; machining of eccentric components such as gearbox casings, and high volume assemblies, mainly in machining centres and rotating units in lathes. Production Process Milling--Proportioning as required--Wet grinding--Dry--Granulation--Press--Sinter--Inspection--Package Named Tungsren carbide inserts Material 100% virgin tungsten carbide Application Milling inserts Workplace Steel/Stainless/Cast iron MOQ 10pcs Color Pictures
Standard ANSI/ASME, JIS, EN, DIN, BS,GB, SH, HG, IFI, ISO and etc. Size :Standard & non-standard, support customized Material Carbon Steel, Stainless Steel and etc. Grade SAE J429 Gr.2, 5,8; ASTM A307Gr.A, Class 4.8, 5.8, 6.8, 8.8, 10.9, 12.9 and etc. Thread UNC,UNF,BSW Finish Plain,ZincPlated(Clear/Blue/Yellow/Black),Black,HDPE,Fluorocarbon Coating, Packing Bulk in cartons on wood pallet or according to customer special demand. Application Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy; Mechanical Machine; Automobile: Supply Ability:About 100 tons per month MOQ Not limited Trade Term FOB/CIF/CFR/CNF/EXW/DDU/DDP Payment T/T, L/C ,D/P , Western Union ,etc