• Universal PC programmable (PCP) • 2 wire technology, 4 to 20 mA analogue output • High accuracy in total ambient temperature range • Configuration during measurement using configuration kit • Customer specific measurement range setting • Wide measurement range, according to requirement Field of application • PC programmable (PCP) Temperature head transmitter for converting the input signal into a standard 4 to 20 mA analog output signal • Input: Resistance thermometer (RTD) Pt100 • Configuration using a PC with MS180 configuration kit (MS180-PC). Appearance and Size (in mm) NOTE: When order, please specify the measuring range, we’ll offer programming tool if needed.
MS181 is an intelligent temperature transmitter module which can be programmed through a PC with Configuration Kit. It has measurement input for resistance thermometers (RTD) ,thermocouples, resistances or millivolt signals in 2-,3- or 4-wire connection, and converts various input signals into a 4~ 20mA analog output signal after linear processing. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use the MS181 programming tool Measuring range Set via PC PC Interface USB/RS232 Input type RTD, TC, R or Millivolt signal Convert accuracy ¡Ü0.1£¥FS Cold junction accuracy ¡À1(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output Max-load £¨V -8V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Isolated voltage 1500V AC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: ¡Ü3.6mA or¡Ý21.0mA Power supply 8¡«30V DC Temperature drift 0.01£¥ FS / 1 Long-term stability ¡Ü0.1 per year or 0.05£¥ per year Ambient -40¡«+85
MS182 is a smart in-head transmitter module with HART® -protocol. It has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection, and converts various input signals into a standard 4 to 20 mA analog output signal after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use PC or the hand operator Measuring range Set via PC or by the hand operator Input type RTD, TC, R or Millivolt signal Convert accuracy 0.1£¥FS Cold junction accuracy ¡À1(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output HART ¨CProtocol output Max-load £¨V -13V£©/0.025A£¨Current output £© Limit current 25mA Response time 1s Isolated voltage 1500V AC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: 3.6mA or ¡Ý21.0mA Power supply 13¡«30V DC Temperature drift 0.01£¥ FS/1 Long-term stability 0.1 per year or 0.05 £¥per year Ambient -40¡«+85.
MS183 , a smart 2-wire in-head and dual-input transmitter module with HART® -protocol, has measurement input for resistance Thermometers (RTD), thermocouples, resistance or millivolt signals in 2-, 3- or 4-wire connection and converts various input signals into a standard 4 to 20 mA analog(high selector, average value or D-value) output signal or 2-way digtal output signals with HART® -protocol after linear processing. The transmitter is programmable directly from PC or via the HART communication. Isolation also is provided between the input and output. A special signal can be set in advance while the sensor burnout or short. Primary Technical Characteristics Programmable Use PC or the hand operator Measuring range Set via PC or by the hand operator Input type Dual-input ( RTD, TC, R or Millivolt signal) Convert accuracy ¡Ü0.1£¥FS Cold junction accuracy ¡À1¡æ(TC) Output 4¡«20mA/20¡«4mA Electrical isolation output HART ¨CProtocol output (2-way) Max-load £¨V -16V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Isolated voltage 1500VAC (input/output) Alarm signal Programmable Underranging linear drop to 3.8 mA Overranging linear rise to 20.5 mA Sensor break or short-circuit: ¡Ü3.6mA or ¡Ý21.0mA Automatic switching while sensor damaged Power supply 16¡«30V DC Temperature drift 0.01£¥ FS/1¡æ Long-term stability ¡Ü0.1¡æ per year or 0.05 £¥per year.
MS150 Series multi-channel temperature monitor is a multi-point temperature measurement instrument. It takes the highest measured temperature in measuring loops as its output signal which is sent out in the form of a 4 to 20 mA standard current signal and the temperature is displayed by the built-in LED. If required, temperature at any measuring point can be shown by operating the keys on panel. Isolation is provided between the input and output. It is mainly used in the applications of multi-point temperature measurement or alarm warning system. By adopting SMT technology, it offers excellent accuracy, reliability and anti-disturbance. Primary Technical Characteristics Measuring range 0¡«100¡æ¡¢0¡«150¡æ¡¢0¡«200¡æ £¨according to user's demand£© Input type Pt100,Cu50£¨TC if specially required£© Measuring Points 2,3,4,5,6 points Convert accuracy ¡Ü0.5£¥FS linearity error < 0.1% Output 4¡«20mA Electrical isolation output Digital display LED Display accuracy 0.5% Voltage drop for display 3V Isolated voltage Drop 2V Isolate Voltage 1500V AC (Input/Output¡¢with isolator) Max-load £¨V -14V~16V£©/0.025A£¨Current output £© Limit current ¡Ü25mA Response time 1s Power supply 14~30V DC Temperature draft 0.025% FS/ 1¡æ Long-term stability ¡Ü0.1¡æper year or 0.05£¥ per year Ambient -40~+85¡æ£¨Aluminium alloy .Casing£© -25 ~+75¡æ£¨Plastic Casing£© Protection level IP66£¨Aluminium alloy£©/IP62£¨Plastic£© Anti-RFI >10v/m(80MHz¡¡1000MHz).
Temperature Protection PTC Thermistor Description PTC (positive temperature coefficient )thermistor switches at one particular temperature. Making use of the characteristics that the resistance of PTC thermistor increases sharply above curie temperature, when ambient temperature increases abnormally, protective circuit installed PTC thermistor will turn on or cut off loop through resistance changing, achieving thermal protection purpose. PTC thermistor protect such equipment and components as motors, transformers, power transistors and thyristors against over-temperature. A PTC thermistor is less expensive than a thermostat, and its switch temperature can be more accurately specified. It is also smaller and easier to design-in to electronic circuitry. Therefore PTC thermistor can be ideal devices for temperature detection, monitoring, indicating, limiting and over (excessive) temperature protection. Typical Application of PTC Thermistor for Temperature Protection and temperature limiting sensors Limit temperature measurement of Industrial electronics application. Power supplies, switch power supply. Home appliances, such as dish washers, washing machines, ironing machines, electric cookers, etc. Electronic data processing and communications engineering (DC/DC converters). Motor windings overheating Protection. Automotive electronics. Semiconductor heatsinks, enclosure panels, temperature-limited transistors. Lighting applications. Features of PTC Thermistor for Temperature Protection and temperature limiting sensors 2 Outlook construction: A-radial leaded epoxy resin coated form, B-metal tag lug form. PTC Thermistor Protection temperature: 60-130C Quick response. Long stability. Small dimension, convenient for installation. Do not need to be reset after protection.
Water temperature sensor
Overview Hart intelligent integration temperature transmitter is adopt the latest international digital integrated technology and automatic control with the domestic industry in accordance with the actual needs but the entire research and development of a new generation of intelligent flow totalizer, well-structured, nice appearances, the hardware use such less components and parts, no potentiometer and moving parts, full-featured, easy operation, reliability, high stability, applicable to chemical, petroleum, metallurgy, light industry, food, electricity, energy management and other fields. .
Temperature Logging System) is an advanced independent weather monitoring system. It supports Secure Digital card which is used to record the data for 10 years with 2GB SD card and with a LCD for on-line monitoring Change in temperature at every time second is recorded Auto sense with 10 years report Solar powered No external power supply required Supports secure Digital card Auto Data Save Algorithm used Lcd Display for upto date temperature Inbuilt RTC Report with Date/Month/Year/Hr/Min/Sec Suitable for any remote place Temperature is calibrated in celsius Led indication On -off switch for recording.
Humidity and temperature sensor module 1. General mhtc1a humidity and temperature sensor module is designed base capacitive humiture sensor by ningbo junrong electron. This product utilizes humidity sensor capacitor and temperature sensor (lm35, america), with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of smd, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application electron, pharmaceutical industry, food processing, warehouses, tobacco, textile, weather, libraries and museum. 3. Shape model encapsulation shape mhtc1a humidity and temperature sensor module without shell detail to the picture 4. Model there are three models according to with or without temperature and humidity sensor. Mhc1a humidity measuring module, without temperature element mhtc1a1 temperature and humidity measuring module, with ntc resistance mhtc1a2 temperature and humidity measuring module, with lm35 temperature sensor 5. Specification (1) power supply (vin) dc 5vf+5% (2) electrical current 2ma (max 5ma) (3) temperature operating range 0 ~ 70fª (4) humidity operating range 0 ~ 100%rh (dew point) (5) humidity measuring range 2 ~ 99%rh (6) temperature storing range -20 ~ 85fª (7) humidity storing range under 95%rh (no dew point) (8) humidity measuring accuracy mhtc1a f+3%rh ( at 25fª, 60%rh ) 24.5*13.5*17mm
Humidity and temperature sensor module Specification (1) power supply (vin) dc 5vf+5% (2) electrical current 1.9ma (max 5ma) (3) temperature operating range 0 ~ 50fª (4) humidity operating range under 95%rh (5) humidity measuring range 30 ~ 90%rh (6) temperature storing range 0 ~ 70fª (7) humidity storing range lower 95%rh (8) humidity measuring accuracy f+5%rh ( at 25fª, 60%rh vin=5.0v 1.65`1.95v ) (9) typical humidity data responding to output 24.5*13.5*17mm
Temperature test meters monitoring Ph/ec(tds)/temperature test meters monitoring Specifications ym-2006 Range Ph: 0.00 -- 14.00ph ec:0.00 -- 19.99ec C: -50pc -- 70pc pf; _58pf -- 158pf Cf: 0.0 -- 199cf tds: 10 -- 19990ppm Resolution: Ph: 0.01ph pc: 0.1pc pf: 0.2pf Ec:0.01ec cf:0.1cf tds:10ppm Accuracy Ph:+/- 0.10 ph pc:1.0pc Ec=cf=tds:+/- 2% f.S Operating temperature:0pc-- 50pc Automatic temperature compensation:0pc--50pc Batteries:dc6vor4x1.5v(ag13) Dimensions:155x86x22mm Weight:222g
Digital forehead temperature thermometer 1.Fast and accurate survey the body temperature 2.With different alarm functions 3.Disigned in a panda shape like a cute toy
Humidity and temperature sensor Capacitance from 150 to 270 pf At 55%rh Sensitivity : 0.2 % by %rh Response time 0.3 s Rtsolution 0.05 pf Accuracy-interchangeability : 3 %hr de 3 a 97%hr Measurement range 0 a 100 %hr Operating range : -40ªc a +80ªc Supply voltage max :12v Not sensible at dc composent Size : 8x9x4 mm3
Humidity and temperature sensor transmitter Digital frequential ouput Nominal frequency 6.5 khz Std sensitivity 13 hz/%rh Response time 0.3 s Response time with Optional protection : 20 s Accurcy-interchangeability : 3 %hr de 3 a 97%rh Hysttrtsis
Non-contact temperature sensor for temperature measurement of products on web, hot-rolled metals, industrial ovens, and applications where physical contact is not possible
Stable multiple control over up to 128 units via 2-way RS485 communication Individual or simultaneous set value changes of TX3 series connected Rotating display of each room status Average temperature computation
Shockwatch tip and tilt sensors continually monitor and/or report the conditions products are exposed to during transit, storage, and operation. Attach one of the tiltwatch family of products directly to a package or container’s exterior surface, to monitor the ‘care in handling’. Tiltwatch xtr tip indicator monitors goods that must remain upright to ensure intact delivery. Tiltwatch xtr is a single-use tip indicator that does not activate until it is at an 80o angle +/-5% from vertical. Tiltwatch plus attached to package’s exterior surface, ‘peel and stick’ pressure sensitive label, is actually three separate registers in a single tilt indicator unit, providing inexpensive 360° tilt monitoring for the entire duration of shipping transit and an unalterable record of damaging excesses.
To facilitate the clients, further we are offer authentic range of impact & environmental recorders that is used for recording varied environment conditions during transportation, storage as well operation. These recorders are assembled and incorporated with latest gps / gprs tracking module required to record any kind of impact and generate reports so as to decrease the rate of products damaging. The various environmental factors like humidity, temperature changes, till and atmospheric pressure can be recorded in this devise and can be rectified to reduce the damaging of the products. They are capable of recording shock, vibration or any environment related impact conditions and can exactly record the time duration of the mishandling. These devices are incorporated with advance triaxial piezoelectric accelerometer technology is used for recording the exact amplitude and direction of impact that enables to set certain control measures to prevent the products from damaging further.
The skid-mate is an air dampened cushioning device that provides a fast, cost effectiveand durable customized solution to protect sensitive products from shock and vibration. Theskid-mate can be easily mounted on a crate or pallet base creating an air-ride cushion in placeof hardwood skid runners eliminating the need for expensive air-ride trucks.Each color coded skid-mate corresponds to a specific load range and allows users to calculatetheir requirements simply and easily to avoid potential laboratory testing and use of expensivepackaging materials. Reduce packaging design & assembly time and cost• eliminate costly damage from handling hazards during shipment• reduce costs associated with shock and vibration damage
