Mold temperature control machine is widely used in various industries such as plastic molding, light guide plate die casting, rubber tires, rollers, chemical reaction kettle, bonding, banburying, etc.The heating power is from 6KW to 90KW, and the temperature control range is 25°C to 280 C. Safety protection system including reverse phase, phase-lack,, protection of power supply, water lack protection, abnormal temperature control protection(detect whether the pipeline is blocked),pumping overload protection, overheating protection, locking the upper limit of temperature control, abnormal temperature sensing element protection, temperature sensing element shutoff protection, emergency stop device ,abnormal alarm buzzer.
1.Temperature controller adopts japans and italian (p.I.D) programmed sensor Internal storage, which calculates automatically. Its precision is controlled within +1¡æ and it can save above 35% power. 2. Two sets of tubular electric heating element can use one or both. 3. Short heating of cooling time and stable temperature. 4. Electric heating can is made of stainless steel. 5. Perfect security protection and fault indication system 6.Use the advanced unit from foreign countries with long life. 7. Cad system design that is easier to handle and maintain. Long;1100 Wide;600 High;600 Weight;110kg Packing; standard wooden case
1.Temperature controller adopts Japans and Italian (P.I.D) programmed sensor internal storage, which calculates automatically. Its precision is controlled within +1¡æ and it can save above 35% power. 2. Two sets of tubular electric heating element can use one or both. 3. Short heating of cooling time and stable temperature. 4. Electric heating can is made of stainless steel. 5. Perfect security protection and fault indication system 6.Use the advanced unit from foreign countries with long life. 7. CAD system design that is easier to handle and maintain. LONG;1100 WIDE;600 HIGH;600 WEIGHT;110KG PACKING; STANDARD WOODEN CASE
Product Description(RO-09WH): Temperature Range: 30-160 degrees Heating Capacity: 9kw Pump Power: 0.75kw Pump Flow Rate: 100 L/ min Cooling Way: Direct Tank Volume: 10L Dimension(L*W*H): 690*368*620 mm Weight: 64 Kg Wooden case
Cd-x08 series 3 digital temperature controller Feature 1. New algorithm using fuzzy logical pid control 2. Six alarm mode setting freely 3. Tc input, rtd input, voltage input, ampere input 4. Relay output, voltage output, ampere output 5. 3 digit led display Model and parameter 1.How to select input type Rtd Pt100(0-499.9ípc) No need custom-mode; free exchange the input way Tc K(0-600ípc) R(0-1600ípc), s(0-1600ípc)ú¼bú¿0-1800ípcú¬ú¼eú¿0-1000ípcú¬ú¼nú¿0-1200ípcú¬ú¼jú¿0-800ípcú¬ú¼tú¿0-400ípcú¬ Need custom-mode 2.Technical parameters Measuring accuracy Less ía0.5%f.Síal dig Control mode On/off control, pid direct action, pid reverse action Control accuracy ía1ípc Control output Relay output, voltage output 0-10madc output, 4-20madc output Relay contact burden 3a/250vac Power 90-250vac 60hz Anti-interference Iec 3g Carton
Size: FY400(48X48 mm), FY600(96X48mm), FY700(72X72mm), FY800(48X96mm), FY900(96X96mm) Supply voltage: AC 85-265V, DC 24V Frequency: 50/60 Hz Memory: Non-volatile memory E PROM Input: Universal Thermocouple - type K, J, R, S, B, E, N,T , W5Re/W26Re RTD - DPT100, JPT100, JPT50 mA dc - 4-20mA, 0-20mA voltage Dc - 0-1V, 0-5V, 0-10V, 1-5V, 2-10V, -10-10mV 0-10 mV, 0-50mV, 10-50mV DP position: 0000, 000.0, 00.00, 0.000 (available for mA or Voltage dc input). Output: Relay: SPST or SPDT Type 3A, 220V electrical life 100,000 times or more(under rated load) Voltage Pulse: for SSR, On: 24V Off: 0V maximun load current 20mA mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms Voltage DC: 0-5V, 0-10V, 1-5V, 2-10V Maximum load current 20mA Alarm: SPST or SPDT type 3A, 220V electrical life 100,000 times or more (under the rated load) Control Algorithms: PID, P, PI, PD On/Off (P=0), Fuzzy PID range P= 0-200%, I=0-3600 secs, D=0-900 Secs Isolation: Output terminal ( control output, alarm, transmission) and input terminal are isolated separately Operating Temperature: 0-50 deg C Humidity: 20-90% RH Optional Specs RAMP/SOAK program : 2 patterns with 8 segments each, the 2 patterns can be linked together as 16 segments use Output 2: Relay: SPST or SPDT Type 3A, 220V electrical life 100,000 times or more(under rated load) Voltage Pulse: for SSR, On: 24V Off: 0V maximun load current 20mA mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms Voltage DC: 0-5V, 0-10V, 1-5V, 2-10V Maximum load current 20mA Alarms capable up to 3 alarms Heater Break Alarm: Display range of Heater Current: 0.0-99.9A Accuracy 1%FS Included CT; SC_80_T (5.8mm dia, 0.0-80.0A) or SC_100 12mm Dia, 0.0-99.9A) Alarm Relay AL1 Transmission: Available for PV and SV transmission mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms Voltage DC: 0-5V, 0-10v, 1-5V, 2-10V maximum load current 20mA Remote SV Input: 4-20mA, 0-20mA 0-5V 0-10V, 1-5V, 2-10V are available Communication: Protocol: MODBUS RTU, MODBUS ASCII, TAIE interface: RS232, RS485, TTL Baudrate: 38400, 19200, 9600, 4800, 2400 bps. 8 bit, start bit: 1bit, Parity : ODD or even stop bit: 1 or 2 bit WaterProof/Dustprof: IP65.
Digital temperature controller Model no.: sf-103 Digital temperature controller For fan cooling cake display showcases of medium& high temperatures Waterproof panel Temperature control / light control Automatically=manually defrost by turning off the unit Manually defogging control Re-start delay Renew factory defaults by button operation Rangeí4545¦ Accuracy: +1¦ Sensor: ntc, 2pcs(room temperature & defrosting control) Power supply: 230vac or 120vac 50/60hz Compressor:20a/ 250vac (1hp) Defogging heater:10a/250vac Light: 5a/250vac Dimension: 77(l)-35(w)-60(d)mm Mounting hole dimension:71(l)-29(w) N.W.: 0.5kg/pc 50pcs/carton Carton dimension: 49.5-43.5-18.5cm
Digital temperature controller Model no.: sf-104a Feature: same as sf-104s (besides built-in relays and transformer) Digital temperature controller For fan cooling freezers & cold rooms of low temperature Waterproof panel Manually=automatically defrost by electric heater Evap. Fan control Time/temp.Setting to end defrosting Re-start delay Parameter locking Celsiuc / fahrenheit degree selection Buiit-in transformer and relays Range:4545¦(40120h) Accuracy: +1¦(+2h) Sensor:ntc, 2pcs (room temperature & defrosting control) Power supply: 230vac or 120vac 50/ 60 hz Compressor:16a/1hp Defrosting:10a/250vac Evap.Fan:8a/250vac Dimension: 77(l)-35(w)-60(d)mm Mounting hole dimension:71(l)-29(w)mm Dimension: 77(l)x35(w)x60(d)mm 50pcs/carton Carton size: 49.5x43.5x18.5cm
Digital temperature controller For fan cooling freezers& cold rooms of low temperature Waterproof panels Double displays (with an outer small display shows temperature synchronously) Manuallyf=automatically defrost by electric heater Evaporator fan control Time/temp.setting to end defrosting Parameter locking Renew factory defaults by button operation Range:·í45f+45f¦(·í40f+120+H) Accuracy: f+1f¦(2+H) Sensor: NTC, 2pcs (room temperature &defrosting control) Power supply: 230VAC or 120VAC 50 / 60Hz Compressor:20A/ 250VAC (1HP) Heater:10A/250VAC Evap.fan:5A / 250VAC Host controller dimension: 77(L)f-35(W)f-60(D)mm Mounting hole dimension of host panel:71(L)f-29(W)mm Accessional display dimension: 83(L)f-23(W)f-18(D)mm Mounting hole dimension of accessional display:66(L)f-19.5(W)mm 50pcs/carton Gross Weight:28.5kg Carton Dimension: 48f-28f-39cm
Key Specifications/Special Features : As per customers requirement
Heating or cooling output Sensor calibration Sensor error detection Auto save and restoration of parameter values Minimum on/off duration time Manual relay control Analog signal output (4-20mA) Communication via RS485 Modbus
Heating or cooling output Sensor calibration Sensor error detection Auto save and restoration of parameter values Minimum on/off duration time Manual relay control Analog signal output (4-20mA) Communication via RS485 Modbus
Heating or cooling output High/low limit alarm Sensor calibration Sensor error detection Auto save and restoration of parameter values Minimum on/off duration time Analog signal output (4-20mA) Communication via RS485 Modbus
Multiple measurements and control as one controller Smart precise control Convenient control of the user-interface Precise temperature control, sensor calibration, sensor error detection data backup
Compact size and easy to use Heating or cooling output Built-in buzzer alarm Sensor calibration Sensor error detection ON delay time
Compact size and easy to install Precise and safe control with dual sensors in the wide range Easy control and timer RS485 communication (Modbus)
Powerful dual measurement and control Perfect syncing according to a Sensor temperature Accurate temperature set Smart control (various control modes) Precise temperature control, sensor calibration, sensor error detection, data backup
Selection of output (heating/cooling) Precise temperature control Sensor calibration Sensor error detection Data backup Min. & Max. ON/OFF maintaining time setup
Temperature controller
Commercial Refrigerator Temperature Controller Solely manufactured by Shu Row Taiwan, can be used in both fixed speed and inverter compressor. Power efficient as well. Any inquiries, feel free to contact us through email or messenger.
