Folding table Key features: Material : alu. Tube 25¦Õ*1.2mm and alu. Belt Specification : 160*60*68cm Packing: one polybag per pc Carton meas:83.5*7.8*62.5cm with 1pc in a carton G.W./n.W.: 8.5/7.5kgs 1*40':1308pcs Moq:1308pcs
Goods lifts ISO-MAX Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V. Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings: corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Machine room door double hinged door with sash lock with side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller call and send control with 24 V, safety circuit 230 V pre-wired with plugs adjustable and time-limited despatch delay device (1-5 s) electronic overload contact acoustic arrival signal position indicator on each entrance thermal motor protection as main switch pre-wired on control panel machine room light with socket ISO-PM 1000 Capacity: 1000 kg Goods lift along directive 95/28/EG with max. 2 persons corrosion-proof self-supporting galvanized steel structure shaft pit depth 270 mm only cabin push button with send control - landing push buttons with call and send control machine room less lift accessible spaces underneath the shaft possible easy mounting steel shaft cladding deliverable (no fire protection) reducing of interference prone by setting a safety feature instead of cabin door space saving installation - compact construction pre-assembled for easy installation no brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffet 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides safety light curtain cabin light - cabin ventilation type tested safety gear special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call special safety gear (type tested) special cabin apron (type tested) Hinged doors manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities with side frames made of galvanized steel according to drawing door locks type-tested by T_V-authorities Maintenance room door hinged door with sash lock with side frames made of galvanized steel Drive unit Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control Cabin push button with send control Landing push buttons with call and send control Micro-processor technique in controller cabinet Selector with absolute encoder
Handheld spot welder with 6 gears adjustable power for precise welding during battery repair, 3GOA portable spot welder uses a high-multiplier lithium battery as the power supply. 3GOA spot welder with battery nickel sheet plated steel strip mainly used for welding of nickel sheets of cylindrical batteries such as 18650. This 650A DIY soldering machine can be used to solder the battery protection board when replacing the battery. Parameters: Model: portable spot welder Battery type: rechargeable polymer lithium battery Battery capacity: 6700mAh Output voltage: 4.2V(MAX) Output current: 650A(MAX) Designed current: 1000A(MAX) Input port: Type-c charging port Input parameter: 5V/2A Nickel band thickness recommendedï¼? 0.1-0.12mm Application: As we know, for iPhone XS and above models, when a third-party battery or a genuine replacement battery is replaced by a third-party repair shop that isn't one of Apple's authorized partners, the battery health menu will show a warning about being unable to verify this iPhone has a genuine iPhone battery. The solution for this kind issue is to swap the original battery protection board to the new battery. This spot welder can be used to solder the battery protection board to solve this problem. Features: 1. High power lithium battery 2. 40cm welding pen cable for more flexible operation 3. Level 1 to level 6, adjustable 6-level power for more precise soldering 4. Automatically thermal protection. 5. 67000mAh battery with capacity indicator to show the percentage 6. Thickened pure copper overflow strip 7. Type-C 2A charging. 8. Suitable for 18650 nickel cadmium battery, nickel sheet of cylindrical battery, NI-MH battery, nickel-hydrogen batteries, etc. Instructions 1. Power on/off. - Press and hold the power button for two seconds in the shutdown state, the light goes on and the device turns on. - Press and hold the power button for two seconds in the power-on state, the light goes off and the device shuts down. 2. Switch output mode. The welding output is started after the device is turned on, and the output mode can be switched by pressing the power button once. There are two output modes available: - Automatic output: The spot welding pen is automatically detected and outputs once when both welding pens are detected to have touched the metal. - Manual mode: press manual spot welding button for one second, the spot welding pen will be output once.
Product Description Item Name OEM Precision Automatic Lathe Metal CNC Machining Turning Brass Aluminum Stainless Steel Machinery Parts Available materials Aluminum: 5052, 5083, 6061, 6082, 7075 Steel/Carbon steel/Alloy steel/Harden Steel/Die steel:Q235, #45, Q345, Y12, Y30, 40Cr Stainless Steel: SUS303, SUS304, SUS303Cu, SUS316, SUS316L, SUS416, SUS431 Brass: C230/C260/C360 Pure Cooper Plastic: POM, POM-C, Nylon, Acrylic, ABS, PEEK, Plexiglas, PP, PE Titanium: TA1, TA2, TA3, TA4, TC4 tolerance �±0.01mm and hole tolerance is �±0.005mm. Finished Anodized, Powder coating, Electroplating, Nitriding, Sandblasting, Heat treatment, Blueing, Grinding, Polishing, As machined, DRW format PDF, CAD for 2D; x_t,.igs,.stp, .step for 3D Processing Equipment CNC Machining center, CNC Lathe, Turning machine, Milling machine, Drilling machine, Internal and external grinding machine, Cylindrical grinding machine, Tapping drilling machine, Wire cutting machine, polishing machine, etc. Surface Roughness Ra 0.2-Ra 3.2 Delivery Time Leadtime of samples: 3-5 days mass production: 10-25days Quality control 100% inspection before shipment Other services CNC engraving, Laser engraving, silk printing, Knurling Company introduction OEM Precision Automatic Lathe Metal CNC Machining Turning Brass Aluminum Stainless Steel Machinery Parts Bomei is an ISO 9001:2015 Certificated manufacturer founded in 2012, We are OEM and ODM metal parts fabrication manufacturer. Advantages: 1. Free design and free samples 2. ISO Certificated with the strict quality control system. 3. 10+ Years OEM&ODM CNC Machining experience. 4. Rich experience in various applications across electronic, industrial, medical industry etc. 5. One-stop machine shop to enhance production efficiency and fast delivery. Our services Established in 2012, Bomei provides custom service of CNC machining, CNC milling, CNC turning, laser cutting, bending and rapid prototyping, we guarantee quality production from structure design, prototype to mass production, surface treatment and a complete set of assembly. Finish We Do: * Nickel Plating / Electroless Nickel Plated / Zinc Plated / Hard Chrome Plating * Colored Anodizing / Hard Anodized * Black Oxide * Passivation *Silkscreen printing * Sand Blasting * Laser Marking * Powder Coating * Chem Film *Brushed Finish *Mirror Finish *Hardened Nitriding *Blueing
Packaging & Delivery: kids bike/children bike/bicycle/cheap bicycle/bmx/baby/child Packaging Detail: as follow your require Delivery Detail 30 day after your advanced money Specifications: children bicycle/kids bicycle/ item no:12" 14"16" 18" 20" Item : Child bicycle, kids bicycle, BMX bicycle, children bicycle, Folding bicycle Bike size : 12".14".16".18"and20". Frame : Steel, painted, argon welding or co2 welding Fork : Steel, painted, argon welding or co2 welding Rim : Aluminum, steel or plastic B.B parts Steel Chaincover Full/half chain cover, steel or plastic Saddle Leather ,good quality Pedal Plastic, color as customer¡¯s requirements Tire & tube Air tire or EVA Mudguard Steel or plastic basket Plastic or steel Tool box Plastic OEM service also can be accepted Warrant: 1. Comply with GB14746-2006 "child bicycle safety requirements" 2. Comply with ISO9001 international quality system management standard 3. Complete testing equipment We could make the new sticker according to your demands. The quantity in one 40 HQ container(68CBM): 85% skd, 1pcs 1 carton, 12" 1260 pcs 14" 1070 pcs 16" 950 pcs 20" 690pcs 50% skd, 1pcs 1 carton, 12" 1875 pcs 14" 1500 pcs 16" 1225 pcs 20"850pcs The quantity in one 20GP container(28cbm): 85% skd, 1pcs 1 carton, 12 510 pcs 14 420 pcs 16 350 pcs 20" 265pcs 50% skd, 1pcs 1 carton, 12 790 pcs ; 14 626 pcs ; 16 507 pcs 20" 342pcs Some details for your reference Wheel size Age Inside leg Height 12" 2-3years (35 to 43 cm) 14"-17" (1.00m - 1.25m) 3'6" - 4'2" 14" 3-5years (40 to 50 cm) 16- 20" (1.10m - 1.3m) 3'8" 4'5" 16" 4-6years (45 to 53 cm) 18"-21" (1.2m - 1.45m) 4' - 4'8" 18" 7-8years (55 to 63.5 cm) 22"-25" (1.35m - 1.57m) 4'6" - 5'2"d 20" 9+years (65 cm +) 26" +5" 5'. SKD OR CKD.
1. Multi-functional with gas shielded arc welding, MMA welding and self-shielded FCAW available 2. Adopt IGBT as power device, with unique control mode, high reliability. 3. High duty cycle, be able to carry out long-time welding. 4. Closed loop feedback control, workable under network voltage fluctuation within range ± 15%. 5. Adjustable welding voltlage and circuit, excellent welding characteristics. 6. Unique welding control circuit with dynamic characteristics is used in gas shielded arc welding, stable welding arc, little spatter, beautiful shaping, high welding efficiency. 7. Slow wire feeding, high no-load, remove the tip ball after welding, easy arc-starting. 8. In MMA welding, stable welding current, excellent arc starting, be able to use all types of electrode. 9. Great reduction in magnetic loss obviously enhances the welding efficiency and energy saving effect. 10. Stable welding can be realized at the lowest current of 30A when using welding wire with a diameter of 0.6mm. Applicable Materials: Low carbon steel. High tensile steel, ordinary steel. Scope of Aplication: Thin plate welding field such as automobile, motorcycle accessories, Steel-Wood furniture, light steel structure etc. Scope of Aplication: Thin plate welding field such as automobile, motorcycle accessories, Steel-Wood furniture, light steel structure etc. Efficiency (%) 85 Feeding Speed(M/MIN) 2.5-13 Model MIG250 (IGBT) Input power voltage/frequency(V/Hz) AC220¡À 15% (Single Phase, 50/60Hz) Rated input power capacity(KVA) 12.2 Input Current (A) 12.6 Rated Output Current (A) 250 Rated Output Voltage (V) 60 Duty cycle (%) 60 Output current range (A) 30-500 Output current range (V) 15.5-26.5 Insulation Class F Protection class IP23 Type of Wire Feeder Compact Diameter of Spool (mm) 270 Postflow Time (s) 1¡À 0.5 Power Factor(cos¦Õ ) 0.93. Dimensions (mm) 920*295*640 Net weight (Kg) 47.68 Earth Cable (MM2) ¡Ý 2.5 Welding Thickness (mm) Above 0.8 Diameter of Wire (mm) 0.8/1.0 .
Anyang Lida Railway Equipments Co., Ltd specializes in manufacturing railway accessories and we are one of the eight famous companies in China and are able to bid for large and medium-sized projects from the Ministry of Railways. You choose us: Because we are more professional!!! Choosing us will be your choice with no regrets!!! With high quality and competitive prices, our rails have been exported to more than 50 countries and areas, such as America, Canada, Brazil, Britain, Germany, Belgium, Spain, Poland, Sudan, India, Thailand, and Malaysia, etc. 1. Light rail of GB11264-89 standard, YB222-63 standard Size: 6kg, 9kg, 12kg, 15kg, 22kg, 30kg, 8kg, 18kg, 24kg Material: 55q/q235b Standard: GB11264-89 standard, yb222-63 standard Length: 6-12m 2. Heavy rail of GB2585-2007 standard Size: 38kg, 43kg, 50kg Material: U71mn/50mn Standard: GB2585-2007 Length: 12.5m, 25m 3. Crane rail of YB/T5055-93 standard Size: QU70\QU80\QU100\QU120 Material: U71mn Standard: YB/T5055-93 standard Length: 12m 4. South African standard steel rail Size: 15kg, 22kg, 30kg, 40kg, 48kg, 57kg Standard: ISCOR standard Material: 700/900A Length: 9-25m 5. Australian standard steel rail Size: 31kg, 41kg, 47kg, 50kg, 53kg, 60kg, 66kg, 68kg, 73kg, 86kg, 89kg Standard: As 1085 standard Material: 900A/1100 Length: 8-25m 6. UIC860-O standard steel rail/UIC60 rail/railway for UIC60 Size: UIC54, UIC60 Standard: UIC860-o standard/EN-13674-1 Material: 900A/1100 Length: 12-25m 7. BS11-1985 standard steel rail Size: BS50'O', BS60A, BS60R, BS70A, BS75A, BS75R, BS80A,BS80R, BS90A, BS100A, BS113A Standard: BS11-1985 standard Material: 700/900A Length: 8-25m 8. JIS E 1103/1101 standard steel rail Size: 15kg, 22kg, 30A, 37A, and 50N, CR73, CR100 Standard: JIS E1103-93/JIS E1101-93 Material: According to JIS e standard Length: 9-10m 9. Indian (ISCR) standard steel rail Size: ISCR50, ISCR60, ISCR70, ISCR80, ISCR100, ISCR120 Standard: ISCR standard Material: 55Q/U71mn Length: 9-12m 10. American standard steel rail Size: ASCE25, ASCE30, ASCE40, ASCE60, ASCE75, ASCE85, ASCE90, ASCE115, ASCE136, ASCE175 Standard: ASTM standard, AREMA standard Material: 700/900A/1100 Length: 6-12m, 12-25m, In bulk or according to your inquiry,
Goods lifts The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m. Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V. Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings: Corrosion-proof Self-supporting galvanized steel structure Shaft pit depth 270 mm only Machine room less lift Accessible spaces underneath the shaft possible Easy mounting steel shaft cladding deliverable (no fire protection) Space saving installation - compact construction Pre-assembled for easy installation No brick shaft necessary Technical information The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details. Structure Steel structure, made of cold rolled galvanized special profiles Buffer 80/80 Compensation device on suspension ropes Baffle plater Cabin Cant-off system made of galvanized steel, adjustable guide shoes on both sides Special safety gear (type tested) Hinged doors Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities With side frames made of galvanized steel according to drawing Door locks type-tested by t_v-authorities Machine room door Double hinged door with sash lock With side frames made of galvanized steel according to drawing Drive unit Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz 2 chain wheels for chains 5/8" x 3/8" suspension 2:1 Controller Call and send control with 24 v, safety circuit 230 v Pre-wired with plugs Adjustable and time-limited despatch delay device (1-5 s) Electronic overload contact Acoustic arrival signal Position indicator on each entrance Thermal motor protection as main switch pre-wired on control panel Machine room light with socket
FLATBED LASER CUTTER 160 PRODUCT DESCRIPTION The MIMO FLATBED LASER CUTTER 160 is mainly for cutting. You can choose different working platforms for different materials. This model is especially designed for textile & leather and other soft materials cutting. You can choose two heads to increase the cutting efficiency and you can also choose the auto feeder for the roll materials cutting. FEATURES Process Materials: Fabric, Leather, Paper, Film, Plastic, Wood Acrylic, Abs, and other Non-metal Materials Application: Garment, Shoes, Fashion, Toys, Filtration, Signs, Arts, Crafts, Awards, Trophies, Gifts and many others Specification: Working Area (W *L): 1600mm * 1000mm (62.9â?? * 39.3 â??) Software: Offline Software Laser Power:150W/300W Laser Source: CO2 Glass Laser Tube or CO2 RF Metal Laser Tube Mechanical Control System: Belt Transmission & Step Motor Drive Working Table: Honey Comb Working Table / Knife Strip Working Table / Conveyor Working Table Max Speed: 1~400mm/s Acceleration Speed: 1000~4000mm/s2 The company MimoWork develops and designs laser systems for non-metal material processing in the industry. We are committed to providing the most suitable solutions for laser cutting, marking, perforating and engraving. With over 20 years of combined expertise in the worldwide laser application industry, MimoWork offers clients comprehensive services, integrated solutions and results are unparalleled. In a continually evolving industry, you may want an experienced partner to bring you the new technology to challenge tradition. MimoWork does not just manufacture the laser systems, more importantly, the company goes deep to understand every client's manufacturing process, technology context and industry background. We analyze the unique business needs of each client, run the sample tests and evaluate each case for the purpose of providing responsible advice. MimoWork values our customers, we offer comprehensive supports for worldwide business. As a leading laser cutting machine manufacturer who is capable to produce contour laser cutter, super large format perforation machine, we guarantee quality and guarantee on-time delivery. If you are looking for Laser Cutting Machine, we will be your best choice! Click here for more information about Flatbed Laser Cutter 160.
FLATBED LASER CUTTER 130L PRODUCT DESCRIPTION The MIMO FLATBED LASER CUTTER 130L is ideal for standard-sized large format materials. This machine is also featuring an ergonomic design with access to all four sides, allowing unrestricted unloading and loading even while the machine is cutting. It is with belt drive in both gantry movement directions. The servo motors with the machine ensure the high speed and high precision cutting. You can choose different working platforms for different materials. This model is especially designed for signs & furniture industry. FEATURES Process Materials: Acrylic, Abs, Glass, Fabric, Laminates, Leather, Paper, Plastic, Wood and other Non-metal Materials Application: Signs, Displays, Arts, Crafts, Awards, Trophies, Gifts and many others Specification: Working Area (W * L): 1300mm * 2500mm (51â?? * 98.4â??) Software: Offline Software Laser Power: 150W/300W Laser Source: CO2 Glass Laser Tube Mechanical Control System: Belt Transmission & Servo Motor Drive Working Table: Knife Strip Working Table Max Speed: 1~300mm/s Acceleration Speed: 1000~3000mm/s2 The company MimoWork develops and designs laser systems for non-metal material processing in the industry. We are committed to providing the most suitable solutions for laser cutting, marking, perforating and engraving. With over 20 years of combined expertise in the worldwide laser application industry, MimoWork offers clients comprehensive services, integrated solutions and results are unparalleled. In a continually evolving industry, you may want an experienced partner to bring you the new technology to challenge tradition. MimoWork does not just manufacture the laser systems, more importantly, the company goes deep to understand every client's manufacturing process, technology context and industry background. We analyze the unique business needs of each client, run the sample tests and evaluate each case for the purpose of providing responsible advice. MimoWork values our customers, we offer comprehensive supports for worldwide business. As a leading laser cutting machine manufacturer who is capable to produce contour laser cutter, super large format perforation machine, we guarantee quality and guarantee on-time delivery. If you are looking for Laser Cutting Machine, we will be your best choice! Click here for more information about Flatbed Laser Cutter 130L.
By ordering online, you can buy our Lake, Membran, Classic model doors, which are produced with the certificate of ESDOOR TSE certificate and ISO 9001 quality certificate, in installments to your credit card. There are standard measurements for retail sales as following details 86-87 x 203 cm for room doors 76-77 x 203 cm for toilet doors After the order is done, the products are completed within 30 working days according to the workload (e.q: normal work intensity). The color in the image is called the product title. Different colors can be applied to the desired pattern according to the product code. Why we use the Fir-Wood-Lumber (Combined with Finger-Joint Technology) for interior frame in the door leaf? Fir tree which is one of the family of pine is known as (carpenter) with white pine. The mechanical strength of this tree species, which is resistant to external influences, is high. It is frequently used in joinery, roofing and mold making due to its dense structure. Resistant to nature conditions such as unstable weather conditions, moisture etc. Thus, all measures are provided in uncertain cargo processes.. Finger-Joint Technology: ESDOOR fir spines are cut and stretched by cutting with special profile knives. In all ESDOOR production processes, we use polyurethane adhesives (no solvent harmful to health). We attach importance to stable production possibilities under each changing conditions. Thus, we produce high quality doors.. Why we use MDF? (Medium Density Fiberboard) There is sound insulation and highly resistant to impacts. Our molds drawn on our CNC machine tools do not deteriorate easily. The mechanical strength of MDF is well ranked. Why use MEMBRANE instead of American Panel? The ESDOOR membrane doors that we produce without using paint, there is no change in time such as fading in door colors. The door can be cleaned easily even if paint is accidentally dripped. According to the American panel, the life cycle of membrane doors with MDF is also positive in terms of price and performance. The scratchproof quality of the membrane with its pvc structure and the door are preferred. It is hygienic, does not contain bacteria and germs. GLAZED Designs: It is easy to clean as it is produced without furring strip. When the glass needs to be replaced, the ease of the guillotine system design is advantageous. Thus, the membrane is not damaged.
Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device. Usage: Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts. Welding head classification: 1. Resistance Welding Heads 2. Spot Welding Heads, 3. Butt Welding Head, 4. Hot Bar Reflow Soldering Heads 5. Ultrasonic Welding Machine Welding Head Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation. Advantage: Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.
Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device. Usage: Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts. Welding head classification: 1. Resistance Welding Heads 2. Spot Welding Heads, 3. Butt Welding Head, 4. Hot Bar Reflow Soldering Heads 5. Ultrasonic Welding Machine Welding Head Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation. Advantage: Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.
The whole The whole sesame oil extraction machine contains three workshops: sesame pretreatment workshop, sesame oil extraction workshop, sesame oil refining workshop. 1. Craft flow of pretreatment workshop of sesame oil extraction machine sesame -- magnetic box --cleaning--hot blast air frying-- pressing--filtering--to extraction workshop 2.Craft flow of extraction workshop of sesame oil extraction machine solvent--extractor--mixed oil--1st and 2nd evaporation--stripping tower--crude sesame oil Wet meal--DTDC toaster--sesame cake 3. Craft flow of refining workshop of sesame oil extraction machine Crude sesame oil--degumming and deacidification--decolorization--deodorization--refined sesame oil. Main Process: 1. Degumming and deacidification: The gumming is moved by phosphoric acid and hot water. There are two ways to move the acid in the sesame oil. One is chemical way, the other one is physical way. The chemical way is using NaOH to react with acid. This way is suitable for the capacity of 5-30T per day. The physical way is using steam and centrifugal to move the acid. This way is used for capacity from 30-2000T per day. 2. Decolorization: This step is used to adjust the color of the oil. You can control the color of the sesame oil according to the requirement of your market. 3. Deodorization: The function of this step is to move the special smell in the oil. This is an important standard for refined sesame oil. 4.FAQ 1.What machine we can manufacture? Cooking oil making machine:10-2000MT per day . Solvent??extraction machine: 10-1000MT per day. Edible??oil??refinery plant : 1-600MT per day. Palm??oil??processing machine: 1-600MT per day. 2.What kinds oil seeds we can process ? Peanut, sunflower seeds, corn germ, cotton seeds, soybean, rapeseeds, rice bran etc. And various oil cakes can be leached . 3.Why chose our company? A.40 years manufacturing experience. B. 26 technical engineers research new efficient processing craft and instruct manufacturing and installation. C. 76 technicians - professional installation team -with rich and mature installation and training experience.
We are one of the reliable sources for exporting wide range of woven and fashion fabrics to a wide clientèle spread all across the globe. Sourced from certified vendors, our range of products is offered at competitive price to our clients. 100% Cotton Shirts : We offer a wide selection of Casual Shirts. Cotton or 80/20 blend, long sleeve or short sleeve, Solid, Check or Stripe, light or heavy weight. Available in wide spectrum of colors. Quality makes the difference. Check Fabrics : Avail form us wide range of checked fabrics, which is used to make high quality fashion apparels. Our range of check fabrics used for making men’s clothes, women’s apparel or kid’s wear, our collection is perfect to manufacture anything for all sections of the society. Dyed Cotton Fabrics : Our range of dyed cotton fabrics are available in various patterns like checks. We offer wide range of cotton fabrics, which is available from small checks to bold checks. Our range of dyed cotton fabrics are widely used for stitching flawless shirts. Dyed Yarn Fabrics : We are specailized in offering high quality 100% cotton yarn dyed stripe fabrics. Our range of yarn dyed fabrics comes with strips and are available in various designs and colors. These are widely used for various stitching applications. Madras Cotton Fabrics : We offer cotton fabric in multi color madras check, which are available in large variety and spectrum of color combinations. Our range of madras cotton fabrics are available at industry leading price to a wide clientèle all across the globe. Sheer Fabrics : We are specialized in exporting high quality sheer fabrics, which are widely used for various knitting and weaving based applications. Our range of seer fabrics are used for making high quality finished garments. Striped Fabrics : Our range of striped fabric is sourced from reliable manufactures, which is offered in various patterns such as checks, stripes, small checks, bold checks and many more. Our collections is offered at competitive rates to our clients. Woven Fabrics : We offer wide range of woven fabric, which is procured from reliable sources. Our range is offered in different patterns, shades & colors and ensures complete durability. Product Description :Manufacturers and Suppliers of Check Fabrics : Dyed Cotton Fabrics : Dyed Yarn Fabrics : Madras Cotton Fabrics : Sheer Fabrics : Striped Fabrics : Woven Fabrics As we are manufacturing, products could be sent directly and promptly to our customers. Thus, we offer services in a timely manner with reasonable prices and quality assurance.
Flocking Machine Application: Flocking scope: Mainly used on: Transfer paper, toys, handicraft; automobile rubber pieces, decoration strips, storing box; metal craftworks, fannerâ??s net cover, printer, copycatâ??s cleanout poles; plastic hanger, wooden hanger; jewel case, package box, gift box, paper box, absorb plastic box, glasses case, wine bottles, manikin, craft lantern, artifical flower, mobile sheath; door mat, carpet mat; sponge, glass, calligraphy and painting, spring festival scroll, paperboard, reticule, inner of suitcase, web, PVC, PET film, nonwoven fabric, sofa cloth, knitted sweaters, shoes fabrics, leatheroid, all kinds of piece and rolled materials, superior products, etc for plain or solid flocking. It is suitable for production of a middle quantity in assembly line or common household production. Detail Description: Delivery Information Delivery Mode By sea, by air, by train or by UPS, DHL, FedEx Delivery Port Qingdao or Appointed by Customers OEM acceoted Yes MOQ 1Units Delivery Time Flocking machines: 3days after receipt of payment Packing Details Inside plastic PVC bag and foam film, out side carton and Free fumigation plywood Sample Time Special flock color: One week, Stock color: 1day Our Advantage 1. Low MOQ It can meet your promotional business well 2. Price Most Competitive 3. OEM We can produce any your design for you 4. Service Hot line in 24hours serving 5. Quality We have strict quality control system and certificate ISO and CE 6. Shipping We cooperate with superior forwarders more than 20years, best services 7. Warranty Flocking Machines 10years About our company: We are happy to provide information and support to our customers. We can run training courses to enable customers to get up and running as soon as quickly. We develop and manufacture more wide ranges of electrostatic flocking machines and equipmentds and accessories such as flock, floss, flocking glue, flocking drying oven, spraying devices, etc We make a wide range of flock and adhesives in stock to support our customers both small and large. Special colours and lengths of flock are available to order. Thank you for visiting our website. We are glad to provide you with helps and supports to assist you in setting up your flocking activities. Help can be given by telephone or email so please feel free to ask. We can provide you with everything that you need to start flocking works. Contact On Line:Skype: seflock
We Offer to Sell Fresh High Quality Chilled & Frozen Halal Beef, Buffalo, Goat/Lamb Meat Details as Follows: 1.Frozen Beef/Buffalo Meat Specifications/Boneless Prime Cuts: Beef Cuts From Hind & Fore Quarter Cuts: Shanks, Thick Flanks, Topsides, Silversides, Eye of Round, Rumps, Tenderloins, Strip Loins, Rib of Eye Roasts, Flank Steaks, Navel, Brisket Point End, Shoulder Clod, Tender Chuck, Chucks for Cubes, Chucks for Further Processing, Silver Side Thick Flank, Rump Steak, Shin Shank, Trimmings, knuckle, Blade. 2.Frozen Buffalo Offals: Tripe, Heart, Liver, Brain, kidney, Tongue, Aorta, Honey Comb, Tail, Cheek Meat, Honk & knee Tendon, Paddy Wack, Pizzle. All are Packed in Various Configurations as Follows: Compensated Beef/Buffalo: Available as 60% Fore-Quarters and 40% Hind-Quarters Packed in 90%VL, 95%VL and 98 %VL Packaging. Fore Quarters (FQ Cuts): Available in 5KG.x 4Rolls in 20KG. Master Carton / Packing in Full Quarters or Separate Fore Quarters Muscles and are Packed in 90%VL, 95%VL and 98%VL Packaging. Compensated Hind Cuts (HQ Cuts): Available as 5% Silverside 20% Rumpsteak, 20%Kuckle / Think Flankand are Packed in 98%VL Packaging. 3.Halal Chilled /Frozen Whole Carcass & Various Cuts Goat & Lamb Meat: Size, Packing & Packaging: Goat/Lamb Carcass with Tail: Size 8-19 Kilograms/Pieces Packed in Plastic & Cloth Bag. Goat/Lamb Carcass Without Tail: Size 8-19 Kilograms/Pieces Packed in Plastic & Cloth Bag. Goat/Lamb with Various Cuts & Sizes: Shoulder, Legs, Ribs with Steak and Back, Front Quarter Pieces Vacuum Packed. 4.Quantity: Minimum Order 25 Metric Tons. 5.Destination: FOB, CRF, CIF Any Safe World Port. 7.Contract Terms: Spot & Long Term Contracts. 8.Payment: Advance or by 100% Documentary sight Letter Of Credit. 9.Delivery: 15 to 25 Days Upon Receiving Workable Letter of Credit. 10.Packing: Custom Sizes, Packing, Private Logo, Language/Manuscript: Provided. Please do not hesitate to contact Us Now to place your order. all Products are Packed in Various Configurations
Cotton Seeds The mature seeds are brown ovoids weighing about a tenth of a gram. By weight, they are 60% cotyledon, 32% coat and 8% embryonic root and shoot. These are 20% protein, 20% oil and 3.5% starch. Fibres grow from the seed coat to form a boll of cotton lint. The boll is a protective fruit and when the plant is grown commercially, it is stripped from the seed by ginning and the lint is then processed into cotton fibre. For every hundred weight of fibre, about one hundred and sixty weight of seeds are produced. The seeds are about 15% of the value of the crop and are pressed to make oil and used as animal feed. About 5% of the seeds are used to sow the next crop. Uses of Cottonseed Feed products for livestock With the advancement of technology, the processing of food has become considerably convenient. As a result cottonseed has been able to flourish in new markets such as feed products for livestock. Cotton seed is crushed in the mill after removing lint from the cotton plant. The seed is further crushed to remove any remaining linters or strands of minute cotton fibres. The seeds are further hulled and polished to release the soft and high-protein meat. These hulls of the cottonseed are then mixed with other types of grains in order to make it suitable for the livestock feed. Cottonseed Meal and Cottonseed Hulls are the most abundantly available natural sources of protein and fibre used to feed livestock. Cottonseed Hulls The outer covering of the cottonseed, known as cottonseed hulls, are removed from the cotton kernels before the oil is extracted. Cottonseed hulls serve as an excellent source of feed for the livestock as they contain about 8% of cotton linters which have nearly 100% cellulose in them. They require no grinding and easily mix with other feel sources. As they are easy to handle, their transportation cost is fairly low as well. Due to a superior nutrition quality,cottonseed hulls they serve as valuable digestive sources for animals. Whole cottonseed is another feed product of cottonseed used to feed livestock. It is the seed, left after the separation of long fibres from cotton and serves as a good source of cellulose for ruminants.Whole Cottonseed leads to high production of milk and fat, if it is been fed to a high-producing dairy cow. It is very cost effective and provides nutrients such as high protein value of about 23%, crude fibre value of 25% and high energy value of 20%. Whole Cottonseed serves as a highly digestible feed which also improves the reproductive performance in livestock. Pima cottonseed which is free of linters by default,and De-linted Cottonseed are other types of cottonseed feed products.
1mm-4mm thick grey paper board : Www.Dgpaper.Cn Skype: andy.Yspaper Specifications : 1.Weight: 220gsm--2500gsm (any grammage can be produce ) 2.Size / shape: Regular sizes are 787mm*1092mm and 889mm*1194mm, other sizes on request. In sheets or in rolls. 3.Detailed spacifications: Product 1mm-4mm thick grey paper board Brand Magic sun Magic lin Grade Aa= 100% virgin wood pulp heavy red card A = mixed pulp heavy red card Standard size: 787*1092mm 889*1194mm (any size are available) Special size As per clients' request Thickness 100gsm = 0.16mm Grammage 250gsm -- 2500 gsm Moisture 12% Application Packing & printing & gift & stationery Reel 0.48mm--1.36mm Sheet 0.48mm--4.0mm Packing method Plastic film & 4 plastic strip & wooden pallet 4.Usage: Generally it used to make gift boxes, cosmetic boxes, wine boxes and other boxes, also used for furniture fixtures, luggage bags lined plate etc. 5.Features: Consistent quality, high stiffness, good folding strength, less flexible 6.Sample: The buyer is free of sample and charge of the express . 7. Packing and packaging: Sheet in piles, waterproof film wrapped, put on four strong edge protector, packed on wooden Pallet, total height is 2.0m or 1.3m, 2.0m height suit for 20/40 gp loading, 1.3m double-deck used for 40 hq . 8. Shipping information Shippment :by sea , by air ...Etc Loading ability :20'fcl:15-17mt;40'fcl:22-25mt 9)payment : Payment terms : 30% depoist by t/t when confirm the order and balance against by t/t or l/c at sight before loading container . 10.Workshop , work term , certiciation and parameter on dispaly : This tradelead is designed to give an overview of our heavy red card products and the services we provide to inspire future partners to contact us: Skype: andy.Yspaper Tp:+86-769-82826651 Mp:+86-13829255192 Qq:2985598566 Size: 787*1092mm, 889*1194mm, 100g=0.16mm
Brief introduction Ceramic Fiber, also called aluminum silicate fiber, it is a kind of light weight refractory fiber. It possesses the performances and advantages of high temperature resistance, light, excellent thermal stability, low heat conductivity, small thermal capacitance and mechanical vibration resistance etc. The ceramic fiber needled blanket is the main products of ceramic fiber, it has higher tensile strength and other excellent features. As refractory material, it has found an increasingly wide utilization in the fields of in metallurgy, cement, glass industry, etc. Production process The complete ceramic fiber production line adopts electrical resistance furnace to melt the raw material (such as calcined kaolin clay, alumina, silica, zirconia, etc) into lava. Then the three-roller centrifuge will attenuate the molten fluid into fibers under the centrifugal force of the high speed rotational rollers to the lava. The crude blankets are formed in the collecting chamber and then carried out from the setting chamber. After going through the allocating conveyor, the crude blankets enter into the sintering furnace to be cured. Then the double-layer needling machine will needle the blanket to make the fiber layer tightly interweave with each other. Then after longitudinal and cross cutting, rolling, the crude blankets will become the needled blanket. Equipment Introduction Melting system The electric resistance furnace could use the current generated between the electric resistances to melt the raw materials. Fiber forming system The fiber forming machine is three-roller centrifuge. The high temperature melting fluid will be dispersed and stretched into thin fibers by the centrifugal force of high speed roller. Wool collector The wool collector is used to collect the fibers into crude blanket. The fibers are evenly drawn on the mesh belt under the function of negative pressure air and become crude blanket. Needling machine Needling blanket is developed from the non-woven needling technique. The needle hooks move up and down and draw the fibers to make the fiber layer tightly interweave with each other. This process could improve the tensile strength and the wind erosion resistance performance of the blanket. Sintering furnace It could burn off the lubricant in the blanket and make fiber microcrystalline processing to achieve the heat shaping of the blanket and reach the required thickness and dimension. Cutting and rolling system This system is used to finish the cutting and rolling of the blankets. The blankets will be cut into pieces or strips and rolled into rolls according to the proceeding requirement. PE film, Container