Stainless steel filter wire mesh is also known as filter wire cloth , micron wire cloth, wire cloth filter screens, micron filtration cloth, micronic mesh, wire filter mesh, micron mesh, filter wire mesh, filtering mesh, filter screen, micron filtering mesh, filtration screen. Material Sus201, sus304, 304l, sus316, sus316l, 310, 310s, sus302, etc. Classification Stainless steel filter circle /filter disc, stainless steel filter cap, stainless steel filter cartridge , stainless steel filter basket Packing Packaging:in roll, waterproof paper inside and woven bag outside.Or according to customer demand based on different size and type product . z
Stainless steel welded mesh in all the grades such as 302, 304, 314. The best in quality mesh with plastic packaging. Available in rolls and sheets.
Stainless Steel Dutch Wire Mesh Yuze offers custom wire cloth to meet clients filtration needs. Dutch weave mesh provides superior filtration capabilities for a wide range of applications, including pressure, fuel and liquid filters for the aerospace, petrochemical, pharmaceutical, mining and waste water treatment industries. Dutch weave mesh with width 3meter are far more than customer expectation Alloy: 316L ,317L 904L stainless steel woven square mesh and dutch weave mesh as main supporting and filtration media of leaf filter which is used in the processing of food ,edible oil, pharmaceuticals and chemicals. Dutch Weave Mesh: Plain Dutch and Twill Dutch and particular RDT mesh are normally used in the applications of Water well treatment and sand control system. Fine Dutch Weave Mesh as finer absolute filtration layer of sintered mesh and accurate chemical filtration,with max width 3m.which is outstanding performance in China woven mesh industry. Packing: wrapped with moisture-proof paper, then in wooden cases
our product and engineering know-how is used in a wide array of mission-critical applications around the world, including ultra-fine filtering, separating and sizing of particles; lightning strike protection on commercial aircraft; acoustic modulation and suppression of high-frequency sound on aircraft and in consumer products; EFI/RFI shielding of military aircraft; rechargeable batteries and fuel cells; heat dissipation in cryogenic environments; oil and gas exploration and well development; and numerous automotive applications.
Material: Stainless steel wire in AISI, SUS302,304,316,304L or 316L Weaving and Features: Plain weave, twilled weave, Dutch weave, etc. It offers good property against acid, alkali and heat, it is also wear resistant. Uses: Stainless steel wire mesh is used for mining, petroleum, chemical industry, food, medicine, machinery manufacturing and other industries. We can produce all kinds of stainless steel wire mesh, including stainless steel square wire mesh and stainless steel twilled woven mesh. Stainless steel wire mesh with its anti-wearing, heat resistance, acid resistance and anti-corrosion properties, is used popularly for mining, chemical industry, food industry, the pharmaceutical industry and many other fields.
Stainless Steel Knitted Wire Mesh Product Description: Knitted wire mesh is typically made from a single or double wire that is knitted to form a spring like & flexible wire mesh of interlocking loops much like hockey socks or sweaters are made. Mono-filament knitted mesh is the simplest type, which can be used in the common applications and the multi-filament knitted mesh has higher strength, which can be used in the heavy duty applications.Knitted Wire Mesh is a high strength and flexible material that has unlimited uses and applications in many industries. Stainless steel knitted wire mesh is produced by special weaving machines, use stainlesss steel wire as raw material, knitting monofilament or multifilament wire into a tubular form. Then the wire mesh be flattened to mesh rolls, and can be also supplied in corrugated (crimped) form. Stainless steel knitted wire mesh are most commonly used in the filtration,separation industries and EMI & RFI shielding industries. Materials: 200 series: Grade 201 (1.4372), Grade 202 (1.4373) 300 series: Grade 304 (1.4301), Grade 316 (1.4401), Grade 321 (1.4541) 400 series: Grade 410 (1.4006), Grade 420 (1.4021 ), Grade 430 (1.4016) Advantages and benefit of stainless steel knitted mesh: Corrosion resistance. Alkali and acid resistance. Rust resistance. High temperature resistance. Excellent shielding performance. Outstanding filtering efficiency. Durable and long service life. Feature: Stainless steel knitted wire mesh offers excellent property such as corrosion resistance, alkali and acid resistance, long service life, rust resistance and heat resistance. Application: Stainless steel knitted mesh has excellent shielding performance. It can be used in the cable shields as a chassis grounding and electrostatic discharge. Stainless steel knitted mesh can be installed onto the machine frames for EMI shielding in military electronic system. It can be made into knitted mesh mist eliminator for gas and liquid filtration. Stainless steel knitted mesh has outstanding filtering efficiency in various filtration device for air, liquid and gas filtration.
Besides stainless steel woven wire mesh and wire cloth, we also provides stainless steel welded wire mesh. Welded wire mesh is traditionally utilized as guards in buildings and factories, as animal enclosure and fence in agriculture; it is also used in horticulture industry as tree guards, plant protection as well as other uses. Advantages of stainless steel welded wire mesh: Stainless steel welded wire mesh enjoys excellent corrosion resistance, beautiful look, longer work time, when compared with galvanized welded iron wire mesh or pvc coated welded iron wire mesh, which can compensate for its seemingly higher cost. We supply stainless steel welded wire mesh made with wire diameter from 1.2mm to 0.65mm, at roll width from 0.4m to 1.8m and length at customers request, mainly for export. Custom packing upon customers request.
Stainless steel :stainless steel is selected for their wear-resisting, heat-resisting, acid-resisting and corrosion resisting characteristics. Many different grades of stainless are used in wire cloth.T304 is the most common, but other are used in specific applications to take advantage of each grade's unique properties. The wire mesh made of stainless steel is extensively used in mining , chemical industry, food industry and pharmaceutical industry. Our stainless steel wire mesh products are generally made of stainless steel type 302, 304, 304l, 316, 316l, 321 and 430 etc. We produce wire cloth in all kinds of forms. The weaving is determined according to our customers pecific requirements, such as the material, the wire diameter, the size of the mesh , width and length. Plain weave: each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter. Characteristics: square aperture , high flow through , relative high open area, as result less pressure drop during filtration suitable for all kinds of filtration up to 63 m. Custom packing upon customers request.
The Stainless Steel wire rope Ferruled Mesh, the wire ropes are neither knotted nor crossed, it is a construction based on stainless steel wire ropes that lie parallel in pairs connected and reciprocally curved by stainless steel ferrules. The wire rope construction is 7 x 7 or 7 x 19. The standard mesh angle is 60¡ã. All the components are made from the AISI 304 or AISI 316 material group. The construction of stainless steel cable netting can be pulled apart like an accordion and our stainless steel rope mesh are all stretched when they are used. Producing a spring force that varies depending on the mesh aperture and wire rope thickness. The Rope Mesh is a vibrant, premium-quality product : the mesh aperture ( variable, from very tight to very wide ) and the wire rope diameter ( 1.2mm,1.6mm, 2.0mm, 2.4mm, 3.2mm ) determine its functionality and aesthetics. The stainless steel cable netting mostly be applied in the architecture. Data Sheet(Standard): NOS Wire Rope Diameter Aperture Min.Breaking Load Inch mm mm(W x H) KN HL-3212F 1/8 3.2 120 x 208 7.23 HL-3210F 1/8 3.2 100 x 173 7.23 HL-3290F 1/8 3.2 90 x 156 7.23 HL-2410F 3/32 2.4 100 x 173 4.08 HL-2490F 3/32 2.4 90 x 156 4.08 HL-2480F 3/32 2.4 80 x 139 4.08 HL-2470F 3/32 2.4 70 x 121 4.08.
The stainless steel wire rope woven mesh are hand-woven from the stainless steel wire rope, the rope construction is 7 x 7 or 7 x 19. The standard mesh angle is 90. The components are made from AISI 304 or AISI 316 material group. Originally intended and now are widely applied in zoos for the construction of animal enclosure, animal cage and aviary, so we could also call it " ZOOMESH ". Meanwhile, it could be also applied in the architecture. You can create a natural environment totally enclosed with ZOOMESH and replace unsightly chicken wire or non-metal mesh. The chicken wire or non-metal mesh require constant maintenance and have a relatively short-term life span. But ZOOMESH's physical properties are incredibly well suited for the above mentioned applications, most important, it is no need to any maintenance, and the life span will be more than 30 years. Stainless Steel Wire Rope Ferruled Mesh: The Stainless Steel Wire Rope Ferruled Mesh, the wire ropes are neither knotted nor crossed, it is a construction based on stainless steel wire ropes that lie parallel in pairs connected and reciprocally curved by stainless steel ferrules. The wire rope construction is 7 x 7 or 7 x 19. The standard mesh angle is 60¡£ All the components are made from the AISI 304 or AISI 316 material group. The mesh construction can be pulled apart like an accordion, producting a spring force that varies depending on the mesh aperture and wire rope thickness. The Ferruled Mesh is a vibrant, premium-quality product : the mesh aperture ( variable, from very tight to very wide ) and the wire rope diameter ( 1.2mm,1.6mm, 2.0mm, 2.4mm, 3.2mm ) determine its functionality and aesthetics. The Ferruled Mesh mostly be applied in the architecture.
Observe the following qualities: 1. Made of high quality stainless steel wire cable, the stainless steel grade includes type 304, type 304 l, type 316, type 316l. 2. Lightweight, but strong (approximately 14 sq. Ft. Per pound) 3. Environmental degradation resistant (corrosion, ultraviolet) 4. Soft to the touch 5. Resists chewing by rodents and other pests (tensile strength approximately 100-110, 000 psi) 6. Excellent flexibility for tough installations 7. Will not damage bird feathers or animal skin on contact 8. Impact point load 1100 lbs. Per sq.Ft., , distributed load strength 44 lbs. Per sq.Ft. The structures of the stainless steel wire cable have 7 x 7 and 7 x 19. All the raw material for producing stainless steel wire cable mesh are imported from south korea and japan. The usual stainless steel wire cable diameter includes 1/8", 3/32", 5/64", 1/16", and 3/64" in inch.The usual mesh opening size includes 4" x 4", 3" x 3", 2" x 2", 1.5" x 1.5", 0.8" x 0.8" in inch. Code Wire Rope Construction Min. Breaking Load (KN) Wire Rope Diameter Aperture Inch mm Inch mm 32152 7 x 19 7.38 1/8 3.2 6" x 6" 152 x 152 32127 7 X 19 7.38 1/8 3.2 5" x 5" 127 x 127 32120 7 X 19 7.38 1/8 3.2 4.7" x 4.7" 120 X 120 32102 7 x 19 7.38 1/8 3.2 4" x 4" 102 x 102 3290 7 x 19 7.38 1/8 3.2 3.6" x 3.6" 90 x 90 3276 7 x 19 7.38 1/8 3.2 3" x 3" 76 x 76 3260 7 X 19 7.38 1/8 3.2 2.4" x 2.4" 60 x 60 3251 7 x 19 7.38 1/8 3.2 2" x 2" 51 x 51 24152 7 x 7 4.18 3/32 2.4 6" x 6" 152 x 152 24127 7 x 7 4.18 3/32 2.4 5" x 5" 127 x 127 24102 7 x 7 4.18 3/32 2.4 4" x 4" 102 x 102 2490 7 x 7 4.18 3/32 2.4 3.6" x 3.6" 90 x 90 2476 7 x 7 4.18 3/32 2.4 3" x 3" 76 x 76 2460 7 x 7 4.18 3/32 2.4 2.4" x 2.4" 60 x 60 2451 7 x 7 4.18 3/32 2.4 2" x 2" 51 x 51 2076 7 x 7 3.17 5/64 2 3" x 3" 76 x 76 2060 7 x 7 3.17 5/64 2 2.4" x 2.4" 60 x 60 2051 7 x 7 3.17 5/64 2 2" x 2" 51 x 51 2038 7 x 7 3.17 5/64 2 1.5" x 1.5" 38 x 38 16102 7 x 7 2.17 1/16 1.6 4" x 4" 102 x 102 1676 7 x 7 2.17 1/16 1.6 3" x 3" 76 x 76 1660 7 x 7 2.17 1/16 1.6 2.4" x 2.4" 60 x 60 1651 7 x 7 2.17 1/16 1.6 2" x 2" 51 x 51 1638 7 x 7 2.17 1/16 1.6 1.5" x 1.5" 38 x 38 1630 7 x 7 2.17 1/16 1.6 1.2" x 1.2" 30 x 30 1625 7 x 7 2.17 1/16 1.6 1" x 1" 25.4 x 25.4 12102 7 x 7 1.22 3/64 1.2 4" x 4" 102 x 102 1276 7 x 7 1.22 3/64 1.2 3" x 3" 76 x 76 1251 7 x 7 1.22 3/64 1.2 2¡± x 2¡± 51 x 51 1238 7 x 7 1.22 3/64 1.2 1.5" x 1.5" 38 x 38 1230 7 x 7 1.22 3/64 1.2 1.2" x 1.2" 30 x 30 1225 7 x 7 1.22 3/64 1.2 1" x 1" 25.4 x 25.4 1220 7 x 7 1.22 3/64 1.2 0.8" x 0.8" 20 x 20
Plain woven : each weft wire passes over one and under one warp wire, and each warp wire passes over one And under one weft wire, every weft wire have and warp wire the same diameter. Characteristics: square aperture , High flow through, relative high open area, as result less pressure drop during filtration suitable for all kinds of filtration . Twill weave :each weft wire passes over two and under two warp wires, and each warp wire passes over and Under two weft wires. The wire diameter for both(warp and weft)is mostly the same. Packing: waterproof paper , woven bag , wooden box and also can be made as per client requirement.
Our stainless steel welded wire mesh is made of selected qualified stainless steel wire through the process of sophisticated automatic welding. This kind of mesh can be made into plain mesh, twill mesh, twill dutch mesh and plain dutch mesh. The finished product is flat, has a stable structure and strength throughout, without any sign of wear and tear when cut or put under stress. Our stainless steel welded wire mesh is noted for its fine quality, stabilization and durability as well as fascination The standard width: 0.6m-1.5m The standard length: about 30m/roll The suitable wire diameter: 14-50# Mesh/inch:3-400 Aperture: 6.27-0.0385mm
Stainless steel woven wire mesh 40meshx40mesh 36 0.44 50meshx50mesh 38 0.36 60meshx60mesh 40 0.30 80meshx80mesh 42 0.21 100meshx100mesh 44 0.17 120meshx120mesh 44 0.13 150meshx150mesh 46 0.108 160meshx160mesh 46 0.097 180meshx180mesh 47 0.09 200meshx200mesh 47 0.077 250meshx250mesh 48 0.061 270meshx270mesh 48 0.058 300meshx300mesh 49 0.054 325meshx325mesh 49 0.051 350meshx350mesh 49 0.042 400meshx400mesh 50 0.0385
Stainless steel welded wire mesh Material: 304 304l 316 316l; Roll width: 36", 40", 48", 60" Weaving pattern: plain weave and twill weave. Property: acidproof, alkali resisting, heatproof and durable Use: sifting and filtering in acid and alkali conditions. Slurry net in petroleum, sifting and screening mesh in chemical and chemical fiber industry, acid washing mesh in electric plating industry. You can order by roll or sheet, the demension are decided by you
Roll width: 24inch, 36inch, 1meter, 48inch or 72inch Roll length: 100feet or 150feet Mesh size: 6.4-50.8mm Wire gauge diameter: 0.56-2.77mm It is up to customer's request.
Brand name: hansai place of origin: china model number : wwm-mbl18 material : low-carbon iron wire hole shape : square aperture : 3/8 width : 0.5-1.8m wire diameter : 0.5-4mm
Brand name: hansai place of origin: china model number : wwm-mbl18 material : low-carbon iron wire hole shape : square aperture : 3/8 width : 0.5-1.8m wire diameter : 0.5-4mm
Expanded metal mesh can be made from a wide range of materials, chiefly expanded steel mesh, aluminum expanded metal mesh, expanded stainless steel, expanded nickel and other metal, as steel reinforcement materials in petroleum, chemical industry and building decorations
item value Place of Origin China Shijiazhuang Material STAINLESS STEEL WIRE Technique Welded Mesh Sample Avaliable Raw Material Iron, Stainless Steel
