1.Door:9-10mm thick aluminium(or 10mm thick steel) with 1mm stainless steel face.Surface with brushed treatment. Conceal hinged door frame.Each door with a Number plate place shows an individual number. 2. Body: made by 2mm thick cold-rolled steel sheet , which is fabricated through rust removing, deoiling, phosphating ect total nine processes.powder coating finish. 3. Lock: high precision dual-key lock approved by US UL safety standards ,its combination number is more than 820 thousand.Distance between lock hole is 47mm. 4. Inner boxes: made by 0.7mm thick cold rolled steel sheet, with powder coating finish,handles at the ends and can be padlocked.Red carpet inside of bottom. 5. Optional:Pull out shelf / Side panels / Top cover
1.It has been equipped with advanced whole air reduced device, internationally advanced power-saving technology and automatically heat protected system. 2. The light weight aluminum punch fan blades with large angle, large wind output and low noise. 3. The motor adopts punch outer crust and bearing roll with low noise,long life time. 4. Its parts are punched with thin steel board of high quality good performance, light weight, elegant appearance and easy to be installed. 5. The outer size has hauling and vertical canister, and outer frame can be stainless steel or steel spraying. It can easily meet the requirements of the different customers. Material:stainless steel or Plastic powder
Place of Origin: Anhui, China (Mainland) Brand Name: OEMor Exact Model Number: 111CL-M Item name: pressure gauge with alarm Pressure range: Equivalent Pressure Unit OEM: Accept Material: Painted Steel Case Brass Internal Accuracy: 1.6% Certification: ISO.KS Mounting: Bottom Window: Acrylic Size: 2.5"(63mm), 4"(100mm) Movement: Semi-brass(complete Brass Normal Size: 1.5"(40mm),2.0"(50mm),2.5"(63mm),3"(75mm),4"(100mm),6"(150mm). Pressure Range: -1Bar(-30"Hg)-0-1000Bar(15000Psi) Accuracy: ±1%,±1.6% Operating temperature: -20°C to +60°C Case: Painted steel Bezel: Painted steel Bourdon tube: Copper alloy or Stainless steel
ball bearing,roller bearing,high quality linear slide block bearings LB100150175 LB100150175 100mm 150mm 175mm Structure high quality linear slide block bearings shapeh linear bearing Seals type no Brand Name USU or some other world famous brand Precision Rating P0 ,P6,P5,P4,P2 Clearance C2,C3,C4 OEM Service welcome Number of row no Place of origin China Material chrome steel ,carbon steel ,stainless steel Cage no Certificate ISO9001:2008 Vibration level V1,V2,V3 Lubrication crease or oil Rollers chorme steel Features High speed ,long life,high reliability,low noise Service customers first Sample Available Quality high quality Hardness 58-62HRC Delivery Rapid delivery
Brand Name: BSO Structure: Deep Groove Type: Ball Seals Type: Open,2RS,ZZ inner diameter: 60 mm outer diameter: 95 mm Height:18 mm Model Number: 6012 Precision Rating: P0-P6 Certification: ISO9001:2008 Number of Row: Single Row Place of Origin: Shandong, China (Mainland) Material: bearing steel ,Chrome steel, carbon steel, stainless steel Service: OEM accepted Application:used in precision instruments, low noise, motor, automobile, motorcycles, general machineries, the most widely used in mechanical industry. They can bear main radial load also certain axial load industrial exporting package; customers' requests.
Longspan shelving 1.The High grade of steel is used in the manufacturing process to ensure consistency in performance 2.Beams welded at top of connector. 3.3 Hook Connector for high load applications. 4.Stronger Upright with Rear Flange. 5.Beam levels are adjustable in 50MM pitch interval. 6.Standard colors: gray & Orange ,,Power Coating can be apply on any color that decorate your space unique 7.Corrosion Protection make it use durable even though outside. 8.Corrosion resistant: tough power coat finish resists rust and cratches. 9.each shelves holds up to 300-800kg. 10.Sturdy industrial strength steel construction. Product Name Longspan shelving Material Cold-rolled Steel Upright 55*60*1.5, 55*60*2.0mm Beam 50*30/60*40/80*50mm Product size Height:2000/2500/2800/3000mm Depth:400/450/500/550/600/800mm Length:1200/1500/1800/2000/2200mm Thickness Upright:1.5/2.0mm Beam:1.5/2.0mm Steel plate:0.6/0.7/0.8/1.0mm Load Capacity 300~800kg per level Layer 2-6 Adjustable layers(can be customised) Color Upright:Blue-RAL5015;RAL5005 Beam:Orange-RAL2004 Steel plate:Orange-RAL2004 Surface finish Power Coated Packing Packed by steel belt and plastic film
All handicrafts items of brass and wood, brass, wooden, bamboos iron, glass, stainless steel, and items made of other metals and materials, wall clocks, flower vases, gift items, cutlery, lamps, wall hanging lights, side tables, Ceiling hanging lights, statues, indian cot(indian traditional),glasses, Jugs, cups of brass and stainless steel, spoons, gift sets of table utensils, Special packs of golden and silver pots. Globally usable dinner set, treys (wooden and metals), table light lamps, festival special items, christmas special items, tibbat and buddhists worship pots, morakkan light, arabic shahi pots, arabian style dinner set, agro products like indian traditional spices , (turmeric powder, red chilli powder, coriander powder, garam masala (aromatic mixture of ground spices powder), jaggery (indian traditional), copper water bottles.
Waste paper , steel scrap (aluzinc coil cast iron scrap cold rolled coil cold rolled grain oriented silicon steel (crgo) cold rolled non grain oriented silicon steel (crngo) color coated steel coil galvanized iron steel coil hot rolled coil ppgi coil stainless steel coil steel scrap tinplate coil , brass scrap copper cathode copper scrap lead ingot zinc ingot sealed units / compressor scrap mix elmo (electric motor) scrap cables shredded armatures / meat balls radiators copper scrap aluminum scrap brass scrap) forrest item. damar batu gum copal gum rosin wood azobe okan limbali teak tali waste paper: occ oinp hws swl mix npaper oil : liquid paraffin lubricant oil rubber oil transformer oil white oil eurasiabd dot net.
Description: Panel produced by mixing chipped wood with glue. Pressed with high pressure. Standard size: 48 ft (1220 2440 mm.) * Special size is available Thickness: 9 - 35 mm. Glue: E0, E1, and E2 Advantage: Less expensive, Strong screw holding, Light-Weight and Eco friendly Standard: FSC, CARB, EPA, EN, JIS, TIS and Green Lable
The panel is produced by mixing chipped wood with glue. Pressed with high pressure. Standard Size: 4x8 ft (1220 2440 mm.) *Special size is available Thickness: From 9 - 35 mm. Standard Thickness are 9,12,15,16,18,19,20,22,25,28,30,35 mm. Glue: E0, E1, and E2 Advantage: Less expensive, Strong screw holding, Light-Weight, Eco friendly There are Certificate FSC, EN, CARB, JIS A5908 and DIN 68761
Fiberboard is produced by mixing fiber (from wood) with glue. Pressed with high pressure. Standard Size: 4 x 8 ft (1220 x 2440 mm.) *Special size is available Thickness: 2.5 - 30 mm. Glue: E0, E1, and E2 Advantage: High-density fiberboards, Moisture Resistant, No Splinters, Smooth surface consistent, Easy to paint and cutting Standard: FSC, CARB, EPA, EN, JIS, TIS and Green Lable
Description: Panel with LPM (Low-pressure melamine) sheet laminated on top. Standard size: 4x8 ft (1220x2440 mm.) *Special size is available Thickness: PB 9 - 35 mm. / MDF 2.5 - 30 mm. Glue: E0, E1, and E2 Advantage: Moisture-proof and heat resistance, Shatter and scratch-resistant, Abrasion resistance Standard: FSC, CARB, EPA, EN, JIS, TIS and Green Lable
Melamine faced panels (MFC & MFMDF) come with great variations with over 100 colors and designs. We meticulously creates the most natural-looking surfaces that mimic the aesthetic of real wood to fulfill endless design imagination. Melamine Faced Panel great quality comes from the use of internationally standardized melamine impregnated paper laminated on the wood panel melamine surface using Short Cycle Press machine that gives greater strength and luxurious design on the woodâ??s surface. With the lamination solution seamlessly impregnated onto the woodâ??s surface, it offers greater resistance to scratches, water intrusion and erosion caused by acidic and chemical substances comparing to foil or PCV coating. Melamine Faced Panel are a great choice for both interior decoration and built-in furniture industry.
Oriented strand board (OSB) is replacing plywood, especially for timber framed houses and in the packaging industry with efficiency and sustainability. OSB is used instead of cement-based building materials reducing carbon emission. To produce oriented strand board, logs are sliced into long chips called strands. These are laid in perpendicular layers and bonded using resin. The result is a strong board that resists moisture, giving it a high load capacity. Thus OSB is strong yet flexible. OSB is produced in huge, continuous mats to form a solid panel product of consistent quality with no laps, gaps, or voids. Finished panels are available in large dimensions, minimizing the number of joints that can "leak" heat and admit airborne noise.
Laminated steel sheet (vcm) is a galvanized steel or cold rolled steel product with treatment and adhesive paint layers and a polymer film top coat applied to the top surface. The polymer film may be single or multi-layered. A paint layer and treatment may be applied to the bottom surface. It has several series: high glossy, matte(low light), wooden grain, flower pattern etc. Film laminated gives better corrosion protection, elegant and clean image. So it becomes one of the most sought-after household appliances, interior construction materials.
Product Description: Electric arc furnace (EAF) is steel making equipment untilizing the thermal engergy of arc generated between electrodes and scrap of metallic material, it is widely used for production of top quality carbon steel, alloy steel, stainless steel in steelmaking works and steel casting plant, we have EAF capacity from 0.5t to 125t. Composition of EAF: * Furnace body * Busbar system * Furnace tilting mechanism * Electrode lifting mechanism * Roof up and rotating mechanism * Water-cooling system * Hydraulic system * High voltage system * Low-voltage system * Electric arc furnace transformer Features: -Electric arc furnace is roof lifting rotation and scrap top charging . -It is divided into common power, super power, ultra high power according to the adaption. - It is divided into left operation and right operation according to the operation mode. -Hydraulic tilting system - Electrode regulation controlled by Siemens PLC - Furnace operation controlled by Siemens PLC - Copper-steel composite steel conductive arm -Energy saving busbar system -The tapping form includes: tapping from spout tapping and EBT tapping. -Tubular water-cooled wall and roof -Manipulators with water cooled lances for blowing oxygen and carbon -Advanced designs of the furnace ensure operation reliable and performance excellent.
Steel coils.
Steel pulley.
Steel crockery.
Steel pulley.