Indoor massage bathtub sr508 hydro massage tubs 1). Size : 182*182*80cm 2). Set-up: 1.White acrylic bathtub 2.Computerizes control system 3.Massage pump 750w : 1set 4.Air blower ( 200w):1pc 5.12inch tv ( waterproof ):1set 6.Dvdú¦1set 7.Hand shower :1set 8. Total jets : 32pcs Rotatable big nozzles :8pcs Small nozzles :8pcs Air bubbles :16pcs 9.Control panel :1set 10.Air regulator :1 set 11.Refrigerator :1set 12.Cold & hot water Switchover :1set 13.Hand shower & water fall Switchover :1set 14.Waterfall: 1set 15.7 colors underwater lamp :1pc 16. Siphon ( drainage ):1set 17.Stainless steel bracket :1set 3) functions: 1.Hydromassage function 2.Redio & cd input 3.Air bubble system 4.Computerized control system 5.Tv system 6.Dvd system 7.Illumination function 8.Cooling system Film+foam+hard paper+wooden crate+iron sheet
JPU1-12 Medium Voltage SF6 ring main unit (SF6 RMU, Abbreviation), with the character of excellence reliability and maintenance free, is suitable for AC 3.6 to 12kV power distribution system with configuration either ring or radiant. Its all live part including LBS, CB, ES and primary busbar are sealed in the tank made of stainless steel and the elbow-shape cable connectors are adopted for the incoming or out-going, that leads to the RMU has less influence from service condition therefore it is suitable for using in the bad ambient condition and relatively restricted space. Its service life is more than 20 years. JPU1-12 is compliance with IEC 694, IEC 60265-1/FDIS, IEC 62271-100, IEC 62271-102, IEC 298 & IEC 420. Ratings Rated voltage (kV): 12 Rated load current (A): 630 Rated fuse current (A): 100 Rated breaking current (kA): 50 Rated peak withstand current (kA) 125 Rated short-time withstand current (kA)25 PFWV (kV): 42/48 BIL (kV): 76/85 Cubicle size (mm): W (various)xH1570XD800 Veneer packing
Product feature 1. We produce this product in our high quality standard using only high materials, i.E. Stainless steel. 2. Its working performance is very reiable, you could spary at any angle, the engine will not flameout. 3. High-work-efficiency, economical, the penetration and clinging of the fog is well. 4. Most light in weight, it is easy to operation and maintenace. Product specification/models 1. Weight, empty in kg. Approx: 7.9 2. Deminsions in mm(lxmxh): 1440x270x315 3. Weight, empty in kg. Approx(shipping data): 11.6 4. Deminsions in mm(lxmxh(shipping data): 1288x310x360 5. Solution tank capacity in l: 5 6. Fuel tank capacity in l: 1.5 7. Fuel consumption in l/h, approx: 1.5 8. Performance of combustion chamber in kw/hp: 11.6/15.8 9. Maxinium flow rate in l/h: 42 10. Flow rate of oil in l/h, approx: 8~42 11. Energy: 2x1.5v batteries 12. Pressure in the solution tank in bar, approx: 0.25 13. Pressure in the oil tank in bar, approx: 0.06
1. Simple in operation,convenient in moving and high efficient in oil treatment. 2. As the new technology, vacuum-segregating (Patent No. ZL200420061085.6) employs particular spinning disk and stainless steel machine with dehydration and air pump and enlarges the area of segregating and coming to three-dimensional evaporation so that obtain the enough time to boil away. In this way purifier could achieve the best effect. 3. Using new type of heating equipment (Patent No. ZL02276238.8), it can reduce heating burthen and extend oil life. 4. Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil. Spurting oil phenomena is never appeared. 5. With advantages of no leakage,low noise and long using life, this series of products adopt special input-oil pump which be airproofed by our factory. 6.In order to meet customer's needs of choosing right filter, we have scientific. Wooden case.
Applications: this equipment mainly production cosmetics industry of depilatory wax strips, it used in remove the face, axilla, legs or other parts of the body hair. Product features: 1. It is a depilatory wax strips device that can coating and molding automatically. 2. The material adopts reel pape. 3. The whole process is completed by machines, setting coil stock, coating and cutting. 4. Its equipped with glass protection and stainless steel surface to ensure the whole production process security and sanitation. 5. It can be connected to packing machine to make sure packing the depilatory wax strips automatically. 6. It can reach to the speed of 300 pieces per minute. 7. High-speed coating gun is adopted to coating wax evenly and neatly. 8. Microcomputer is used to facilitate users operation. Raw no woven Speed 20-200 sheet/min Product length disposable adjusted by microcomputer Product width 50-100(mm) Coating length automatic adjusted by computer Coating width 20-90(mm) Machine dimension 2950mmíß1000mmíß1800mm Machine weigh 1.8t Power 7kw
Applications: This equipment is mainly used in production of cosmetics industry of depilatory wax strips, it is used in remove the face, axilla, legs or other parts of the body hair. Product Features: 1. It is a depilatory wax strips device that can coating and molding automatically. 2. The material adopts Reel paper. 3. The whole process is completed by machines, setting coil stock, coating and cutting. 4. It's equipped with glass protection and stainless steel surface to ensure the whole production process security and sanitation. 5. It can be connected to packing machine to make sure packing the depilatory wax strips automatically. 6. It can reach to the speed of 300 pieces per minute. 7. High-speed coating gun is adopted to coating wax evenly and neatly. 8. Microcomputer is used to facilitate user's operation. Rawú¦ Nonwoven Speedú¦ 20-200 sheet/min Product Lengthú¦ Disposable adjusted by microcomputer Product Widthú¦ 50-100(MM) Coating Lengthú¦ Automatic adjusted by computer Coating Widthú¦ 20-90(MM) Machine Dimensionú¦ 2950MMí-1000MMí-1800MM Machine Weighú¦ 1.8T Powerú¦ 7KW.
Processing types Ice cream Processing Mixer Place of origin Guangdong china Brand name Ocean power Model number Hc118 Payment & shipping terms: Minimum order quantity: 1 piece/pieces Packaging details: Plywood Delivery time: 7 days Payment terms: L/c, t/t Supply ability: 3000 piece/pieces per year Specifications: 1) main compressor danfoss from denmark 2) expansion value danfoss from denmark 3) over-current and low-voltage protection 4) low mix level alert 5) patented evaporator and beater design 6) stainless steel shell 7) hourly production: 18l/h, 130 cones/h (100g/cone), Can be used with different mixes and operating conditions 8) tank capacity: 7l 9) flavors: 1 10) electric power: 220v/50hz 11) installed power: 1.45kw 12) condenser: air 13) refrigerant: r404a/r134a 14) dimensions: 488 x 703 x 802mm Optional: Customized display panel Outer packing: wooden case Wooden case dimensions: 660 x 850 x 1, 010mm N.W.: 120kg G.W.: 139kg Outer packing: wooden case Wooden case dimensions: 660 x 850 x 1, 010mm
two kinds of flap wheel can be available: 1: Flap wheel with metal center specification:diameters:2í¦-20í¦,width:3/4í¦-7í¦ and various specific spec. features:it has the sharp grinding and cutting blades and high security and is ideal for surface polish of metals Applications:it can be mounted on various automatic and manual lapping machines for the grinding and polishing operations,suitable for all sorts of metals. 2: Flap wheel with plastic core specification:width:1í»í»2í»í»and other specifications,diameters:4í»í» 6í»í» 8í»í» 10í»í» 12í»í» and other spec. features:it is poured and injected for molding directly once with high-temperature glue,so that the safety and the adaptability for various specifications of middle holes have been improved. Grits:40#-400# Flap Wheels are manufactured from strips of high quality aluminum oxide material closely packed and radically bonded to a shaft or metal center. These wheels are more durable and provide a longer and cooler cutting action than is possible using conventional discs. Recommended for cleaning, deburring, blending, and polish grinding on stainless steel, aluminum, etc. Conformable to most shapes, they are available in coarse to fine grit.
The features of this equipment is as follows: A)combining the latest technology and years experience into a whole. B)Fully stainless steel,compact structure and nice design. C)High rotation speed,even and fine rasping effect,high starch dissociation. D)Over one hundred of blades distributed in rotary drum. E)Special slot design to replace the assembly of saw blades easily. F)Special splint design to cramp the saw blades. G)Special material make the saw blade high rigidity and durability. H)Both side of the saw blades can be used . I)Special cramping setting of sieve screen to facilitate the demounting of sieve screen. J)Observation window to inspect the running situation of saw blades. K)SKF bearing from Sweden and excellent belt from Germany are used. L)Widely used in potato starch and cassava starch processing to crash and rasp the raw materials. 2170x1306x1190 2700kg or 2170x1398x1190 3800kg
With the material that is compatible with the fire-resistant oil and dehydration in vacuum, new particle-filter for removing pollutant, the technique for absorption of the acid constituents in the treated oil, series of kyj oil-purifier for fire-resistant oil are especially designed for the use of the fire-resistant oil. They have the functions of purifying and filtering the qualified fire-resistant oil in advance, re-purifying and re-filtering the slight pollutant fire-resistant oil, recyclable filtering the mid-degree pollutant fire-resistant oil. The series are the indispensable filter equipment when fire-resistant oil is having used. They can be applied to operate on-line, filter movable and add new oil, and extend the lifetime of fire-resistant oil, maintain security of the machine and save power. Features of product 1. The plant is all made of stainless steel with features of handinessíónice appearance and easy operation. 2. The plant adopts the elements of vacuum adsorption which could eliminate the acid of water in the oil. 3. Oil level control adopt photoelectric way which the main components is imported from switzerland and have features of sensitive control, exactitude. Spurting oil phenomena is never appeared. 4. The exacting filter assembly employee the specialized ones which have a good effect for impurity controlling (could reach the nas 5-6 grade). It will satisfy clientí»s using requirement
Main technical characteristics: Temperature range: -65+165 Characteristic impendance: 50+ Working voltage: 335v max (efficient value) Frequency range soft cable: 0-12.4ghz; semi-rigid cable: 0-18ghz Dielectric withstand voltage sea level: 1000v (volts rms) Contact resistance inner conductor: 3m+, outer conductor: 2m+ Insulation resistance 5000m+ Insertion loss: 0.15db at 6ghz Rf leakage frequency 2-3ghz -60db(soft cable); -90db (semi-rigid cable) V. S. W. R: Straight connect soft cable 1.15+0.02f Right angle connect soft cable 1.20+0.03f Straight connect semi-rigid cable 1.05+0.01f Right angle connect semi-rigid cable 1.10+0.01f. Material & plating: Shell brass plated by hard gold or purification of stainless steel surface Contact pin brass plated by hard gold Socket beryllium plated by hard gold Insulator ptfe Sealing silastic Crimping suite copper alloy plated by nickel Machine performance: Durable of connector 500 times. Plastic package
30w tube guitar amplifier Model gt-30h Power 30w Speaker no Impedance 16ohm, 8ohm 4ohm (switchable) Features Auto standby Four el84s and three 12ax7s 2-channel preamp Pre- post-gain controls on lead channel Normal volume control on clean channel 3-band passive eq(bass, middle, treble) Boost switch Footswitch selectable channel switching and reverb Speaker output jack Spring reverb Black vinyl covering Front board 3mm aluminum-alloy Back board 1 mm stainless steel Connect with gt-30c We provide kits , oem and odm services, please use kldguitar being keywords in google and contact with us directly so we can reply you in time Dimensions 51(w) x 27(h) x 25(d)(cm) (unpacked) 58(w) x 35(h) x 37(d)(cm) (packed) Weight 15.5kg (packed) 12 kg(unpacked)
We are manufacturer and exporter of ophthalmic (eye) medical equipment and instrument since 1987. We are manufacturing diagnostic and operative (surgical) instruments our ranges of product are as under: Equipments: 1: ophthalmic refraction chair unit. 2: operative table. 3: equipment table motorized. 4: surgical chair motorized. 5: vision testing equipments like:- 1. Vision drum 2. Trial lens sets 3. Trail frame, etc. 6: micro surgical instruments:- 1. Stainless steel instrument for catract û phaco squient etc. 2. Titanium instrument :- By manual i/a systems and other micro instrument. 7: micro surgical blade. 8: instrument trolley. Micro surgical instrument We manufacture and offer to our clients a wide range of titanium-titanox micro surgical instruments that are made out of best quality titanium material. Each instrument of nox-titanox results from convergence of expert evaluation, experience and the know how that make titanox famous. Their functional superiority, design and durability have made them renowned around the world. Each one is a unique piece made for the refined precise movement of ophthalmic surgery. Titanox instruments are long lived. ò speculums and retarctors ò scissors ò forceps ò needle holders . Cannulas . Micro blades ò instrument cases and tray
Manufacturer yamaha Model year 2007 Model fx cruiser« high output Price . $4, 299.00 Engine 4-cylinder, 4-stroke, open-looped, water-cooled Displacement 1, 052 cc Bore x stroke 76 x 58 mm Compression ratio 11.9:1 Carburetion efi (electric fuel injection) Ignition direct with 31¦ btdc timing Transmission direct drive from engine Pump 155 mm, high-pressure axial flow Impeller 3-blade, stainless steel Lubrication dry sump Starter electric Horsepower 160 hp Height 48.8 in. (1.24 m) Length 131.5 in. (3.34 m) Width 48.4 in. (1.23 m) Dry weight 780 lbs. (354 kg) Seat length 66 / 56 in. (1.67 / 1.43 m) Seating 1-3 person / 529 lbs. (240 kg) Oil capacity 1.32 gal. (5 l) Fuel capacity 18.5 gal. (70 l) Hull material: ultra-lightweight smc (sheet molded compound) Storage capacity: 26.4 gal. (100 l)
- up-slide of filling device The up-slide of filling device can stability for cans during high speed operation, and do not easy get foam for production. Filling valve is equipped with cip function and is easy to cleaning. - filling barrel The filling barrel is infeed from down side and co2. , air from up side to separte control entering co2, and air discharge, filling barrel adjust up or down level that can turn the screw shaft of barrel cap. Made of sus 304 stainless steel plate and with cip device and is easy to cleaning. - electro-pneumatic latch A electro-pneumatic latch has a no bottle no fill mechanism, to ensure highly efficient positive follow-up operation. - bottle stop device & infeed timing screw Made of mc nylon, noise is minimized during high-speed operation and bottles are protected from breakage and well stabilized. - co2 & air adjustment control disc Adjust pressure by required, easy operation and operate on control disc.
Stainless steel case 15 bars Italian Electromagnetic pump "S" appearance design íºC patent, simple & laconic Enviro Brass (Lead-free Brass) inside mechanism, according with the Food Safety Standard íºC safe & healthy With the instantaneous water heater system, no germs can live in the system, which make this system healthy Fashionable big transparent 3L water tank íºC satisfy the need of making coffee continuously Continuously making coffee design íºC no need to wait Separate switches for separate boilers íºC save energy Powerful patent steam making system - offer strong and continuous steam The machine only need two minutes to warm-up, so you save a lot of electric energy. (Some old traditional coffee machine need about 1hour to warm-up) Comparing with the traditional procedure of coffee, pod coffee system can save 15% coffee powder. Removable waste water trough, you can easily keep the machine clean High quality machines; we want to make perfect machines for our buyers
We are manufacturer of all types energy saver like home , restaurant, small industries , & big industries. About the technology : The gas is passed directly throught powerful magnets, placed inside the device. This increases the excitation level of gas molecules, causing their clustering. When the gas now come out of "svi" , it burns with improved thermal efficiency. This unique process result gas by upto 31 %. Uptill now the magnets were used to be placed outside the tube carrying gas, which gave low saving efficiency of the gas saver. The innovative feature of "svi" is that the gas comes inphysical contact with th power packed parmanent magnets. The magnetic field strength must be at a high gauss level since it may be demagnetized to some extent before reaching the combustion engines are liquid. But liquid fuels don't combust till they are vaporized and mixed with air. Benefits : - The flame becomes brighter and turns from red to white orage. A high tempetarature bright flame is observed. - The flame is reduced in vertial length and extended laterally. The rate of combustion becomes higher. - Material : 319 grade brass & 304 grade stainless steel. - No cutting on gas fuel line. - Maintance free device. - Quick, safe & easy to install.
1. High quality transparent PC body of lamp resists aging.mixes colour uniformly and has excellent transmission performance of light. 2. Waterproof Grade can reach Ip67 by using special glue. special sealed lock-connection. 3. Using stainless steel clip to install is safe and beautiful. Module installation is fast and convenient. 4. Voltage:DC5V, MAX power: 24W/PCS 5. Weight:1KG/PCS,Environment temperature range:-20-60 Centigrade. Humidity:0-95Degree. 6. Each square meter screen can be 576 pixels or 1024 pixels. 7. 16pcs panels (250mí-250m) to become one square meter of 1024 pixels. Technical parameters Voltage : DC 5V Unit power: 15W Pixels density: 576 points / square meter (Dots / sq.m) Pixels: 2R1G1B Color: 16777216 species (16.7M) LED life: 80000 hours (Hrs) Weather protection: IP65 Ambient temperature: -10 íµ ~ 50 íµ Size: L330 X W330 X H50 Weight: 6Kg
Specifications: 1) Compressor is Aspera from Italy 2) Expansion valve is Danfoss from Denmark 3) Protection of over-current and low-voltage 4) Digital display, simple control 5) Patent evaporator and beater design 6) Hourly production: 38L/h, 300 cones/h (100g/cone), can vary with mix used and operating condition 7) Tank capacity: 6.5L x 2 8) Flavors: 2 + mixed 9) Electric power: 220V, 50Hz(or 60Hz) 10) Installed power: 2.4kW 11) Condenser: air 12) Refrigerant: R22/R507 13) Dimensions: 550 x 735 x 1,335mm 14) certifications:CB CE ROHS GOST Optional: 1) Cone dispenser 2) Customized front panel 3)phase converter and three- phase motor 4)pre-cooling system 5)air pump 6)stainless steel shell Wooden case dimensions: 720 x 880 x 1,530mm N.W.: 160kg G.W.: 185kg
Reverse Osmosis drinking water purification machine, RO water treatment plant with 10000 liters per hour capacity.Design scope:1. to treat water with high TDS inlet.2. to meet anti-scalant purpose3. to automate the backwash and starting system4. to suit the shipping containerFeatures:1. Fully automatic PLC control starting system2. With compound FRP quartz sand and active carbon filter to save space3. With Chemical dosing systemSpecifications:1. Feed water delivery pump: CDL16-30, China made special water pump, water flow: 16M3/hr, lift 30 meters2. Multi-phases pump: CDL16-120, China made pump,water floe 16M3/hr, lift:120m3. Compound filter FRP vessel with automatic backwash control unit: diameter 1200mm x 2000mm with sand filters: 2000Kg, active carbon filter: 750Kg.4. Micron pp sediment filter stainless steel 304 vessel: diameter 400mm x 1000mm with 40" pp filter 11PCS 5. RO membrane and housing system, RO membrane: FILMTEC BW30-400 type, 8040-3 FRP membrane housings: 3PCS 6. Chemical dosing system and membrane washing tank and metering pump system7. PLC control system and wiring system8. Piping connecting system Wooden case