Permanent Magnet drum pulley replaces the drive pulley at the end of conveyor belts We have a wide variety of conveyor belt type pullies which can be supplied as per measurements and it is ready for installation The magnetic head roller extracts the iron particles from the material flowing and carries them to the underside of the belt where they are removed and collected Head roller magnets for conveyor belts are supplied in permanent magnets The model with permanent magnets is fitted with powerful and AnIsotropic hard ferrite magnets Rare earth magnet system is also available in two types with longitudinal polar field distribution for use with low levels of iron contamination and thin mineral layers and with lateral polar field distribution for greater material thickness and larger iron particles Salient Features Selfcleaning option The magnetic field range from 2500 to 8500 gauss is available No maintenance All welded body and strong construction The pulleys either use ceramic magnets or powerful rare earth magnets
API 7-1 P530 Non magnetic Drill collar for oil&gas downhole drilling The Non-magnetic drill collar is made of a kind of low carbon high chrome-manganese alloy steel, material normally is P530 or P550 or higher grades, which is refined after strict chemical composition ratio and forged to achieve its mechanical properties, this kind of drill collar has superb mechanical properties of low permeability and high strength. Mainly used for down hole directional drilling. Our Strict control of chemical composition and special forging process guarantee the excellent mechanical properties of our non magnetic drill collar. Special Treatment on ID: Roller Burnishing. (after roller burnishing, a comprehensive layer come into being) Advantages: Increase the corrosion resistance properties; Increase the surface hardness of bore up to HB400; Increase surface finish of bore to Ra 3.2m Test and inspection carried out on each bar during production : Chemical Composition; Tensile Test; Impact Test; Hardness Test; Metallographic Test (Grain Size); Corrosion Test (According to ASTM A262 Practice E); Ultrasonic Test over the whole length of the bar (according to ASTM A388); Relative magnetic permeability test; Hot Spot Test; Dimension Inspection, etc.
Roller Conveyor Shot Blasting Machine Manufacturer Roller Conveyor Shot Blasting Machine is to clean h beams, steel plates, sheets, strips, wires, bars, billets, slabs, rolled and fabricated structural shapes, and miscellaneous weldments, pipe, tubing and gas cylinders.Automatic loading and unloading, automatic blasting, automatic dust collection,automatic abrasive media reclaim system. Product Description Shot Blasting Machine is to clean h beams, steel plates, sheets, strips, wires, bars, billets, slabs, rolled and fabricated structural shapes, and miscellaneous weldments, pipe, tubing and gas cylinders.Automatic loading and unloading, automatic blasting, automatic dust collection,automatic abrasive media reclaim system. steel pipe shot blasting machine Application Rust and heat scale removal, paint stripping, surface texturing, preparation for painting, bonding and plating,deburring, deflashing, cleaning, cosmetic finishing. Tags Shot Blasting Machine,Shot Blasting Machine factory, Industry Blasting Machine
Greenhouse top ventilation manual film roller winch roller ventilation roll up Manual Film Reeler Our plastic film is supplied in a wide range of thickness and widths. PRODUCT PARAMETERS Roll HeightRoll LengthSpeed RatioFunction 1.5m120m4:1Roof Vent 1.5m120m4:1Side Vent Greenhouse Manual Film Roll Up Unit FEATURES Good Heat Preservation Double High Light Transmittance and Transparency We supply highly advanced, long-lasting multi-layer photo selective Greenhouse Plastic Film for use in greenhouse and tunnel covering applications. New technology in the production allows our Plastic Products to provide a full range of product features. Our plastic film is supplied in a wide range of thickness and widths. We can design and install farming and planting greenhouse for you according to your needs. You can choose single span greenhouse or multi span greenhouse, or contact us directly for the latest design! The main sales greenhouse accessories:Electric Roll Up Unit, Lock Channel, Lock Spring Wire, Rack Pinion, Greenhouse Film, Manual Film Reeler For more information about the Greenhouse Accessories, please click here.
Simple with good price Compact structure Easy & safety operating system Customizable Overseas commissioning I. Features 1. Suitable for various metal sheet uncoiling, straightening, feeding. 2. Suitable for producing metal part hardware, electron, electrical appliance, toy and auto parts etc, by continuous uncoiling, straightening, feeder, pressing production. 3. Japanese brand servo motor, PLC, and other good quality electric parts, with little malfunction, but long using time. 4. Rollers have chrome plating, high precision, more durable. 5. Input feeding length number easily, easy operation, safe and high stability. 6. According to ergonomic optimization design, stable quality and safety performance, compact structure, to save using space to ensure complex strurture and stable safety additionally, it can save space. 7. It adopts 7 pieces of straightening rollers, so can straighten high rigidity material effectively, to improve material straightening precision and feeding precision. 8. For customers optional requirement, through servo system control, to adjust straightening range automatically, as higher automation.
(1)Plate Material: Galvanized plate (2)Thickness of the plate : 1.5-3.0mm (3) Machine body : 400mm H steel (4)Wall thickness of the main forming machine: 18mm steel plate (5)Transmission chain : 2 (6) Reducer :11kw Xingxing Cycloid which works stably and no noise. (7) Seam type semi-mat (8) Roller material: 9 Cr-Si with quenched treatment 62-64 (9) Rollers: 12 steps for moldind and 9 steps for leveling, 1 pair steps on the middle for adjusting machine height, 1 pair steps on the coil-output part for adjusting deviation and 1 step for straightening (10) 4 steps side wheels on the coil-input part for avoiding coil-deviation (11) Diameter of active shaft: 65mm, 45# steel (12) Hydraulic pump power: 5KW (13) PLC control systerm with inverter (14) Dimensions of major structure: 7.6(length)*1.0(width)*1.2m(height) (15) Woking Speed: 8-12m/min
The Halo Full Commercial Adjustable Incline/Decline Utility Bench is a versatile multi-function bench which is fitted with a lifting handle and rear rollers for easy and safe movement. With lumbar support, adjustment profiles and adjustment options that allow the back to adjust from flat to 85 degrees, and a decline from 0 to 20 degrees, this product is built with your comfort in mind. Halo have designed this item with tapered seats at the front and rear in order to reduce damage caused by dumbbells, whilst optional roller assembly is available for additional stability when performing decline press and sit-ups. Frames are available in eight standard colours (see colour chart image), and custom colours are also available. Upholstery Colour Options are available (see Upholstery Colour Options image), though please note that Upholstery Colour Options are manufactured to order, therefore delivery lead time will increase to 10 to 12 weeks. We will need to contact customers to confirm colour choice, as well as those who order Unique and ISO-Lever products to confirm delivery prices (which are dependent on product type and delivery location). THIS IS A SPECIAL ORDER ITEM & IS NON RETURNABLE UNLESS FAULTY.
Specification: Diameters: 13.5mm/16mm/19mm/22mm/25mm/28mm/30mm/32mm/35mm/38mm Length: customized as you want Screw Thread: M6/M7/M9/M11/M12/M15/M16 Printing&color: Offset Printing; white/silver/yellow etc roller coating,and 1-6 colors printing for your choice Caps: Screw caps or Standup caps Plastic nipple: all depends on your demand, to keep a beautiful appearance and clean Tips: normal open tips/membraned tips or injection tips. Material: aluminum purity>99.7%. Internal Lacquer: gold/silver/white colors, to keep the good nature of the cream etc. inside Roller Coating: white or other colors as your requests, to achieve the perfect printing effect Bottom Latex: need or not, just depends on your requirements Nozzle Design: with membrane, open end, elongate nozzle, based on the customers' requirements Tube Shoulder: flat, brushed, polished, ringed or lacquered
Specification: Diameters: 13.5mm/16mm/19mm/22mm/25mm/28mm/30mm/32mm/35mm/38mm Length: customized as you want Screw Thread: M6/M7/M9/M11/M12/M15/M16 Printing&color:Offset Printing; white/silver/yellow etc roller coating,and 1-6 colors printing for your choice Caps:Screw caps or Standup caps Plastic nipple: all depends on your demand, to keep a beautiful appearance and clean Tips: normal open tips/membraned tips or injection tips. Material: aluminum purity>99.7%. Internal Lacquer: gold/silver/white colors, to keep the good nature of the cream etc. inside Roller Coating: white or other colors as your requests, to achieve the perfect printing effect Bottom Latex: need or not, just depends on your requirements Nozzle Design: with membrane, open end, elongate nozzle, based on the customers' requirements Tube Shoulder: flat, brushed, polished, ringed or lacquered
Product Description: Diameters:13.5mm/16mm/19mm/22mm/25mm/28mm/30mm/32mm/35mm/38mm/40mm Length: customized as you want Screw Thread: M6/M7/M9/M11/M12/M15/M16 Printing&color:Offset Printing; white/silver/yellow etc roller coating,and 1-6 colors printing for your choice Caps:Screw caps or Standup caps Plastic nipple: all depends on your demand, to keep a beautiful appearance and clean Material: aluminum purity>99.7%. Internal Lacquer: gold/silver/white colors, to keep the good nature of the cream etc. inside Roller Coating: white or other colors as your requests, to achieve the perfect printing effect Bottom Latex: need or not, just depends on your requirements Nozzle Design: with membrane, open end, elongate nozzle, based on the customers' requirements Tube Shoulder: flat, brushed, polished, ringed or lacquered Packing of Aluminum Tube: Tubes are covered by PE film first, then packaged in carton Lead Time: 15 days for sample; About 25-35 days for one 40HQ container Payment Term: T/T, L/C, Western Union
Product Description: Diameters:13.5mm/16mm/19mm/22mm/25mm/28mm/30mm/32mm/35mm/38mm/40mm Length: customized as you want Screw Thread: M6/M7/M9/M11/M12/M15/M16 Printing&color:Offset Printing; white/silver/yellow etc roller coating,and 1-6 colors printing for your choice Caps:Screw caps or Standup caps Plastic nipple: all depends on your demand, to keep a beautiful appearance and clean Material: aluminum purity>99.7%. Internal Lacquer: gold/silver/white colors, to keep the good nature of the cream etc. inside Roller Coating: white or other colors as your requests, to achieve the perfect printing effect Bottom Latex: need or not, just depends on your requirements Nozzle Design: with membrane, open end, elongate nozzle, based on the customers' requirements Tube Shoulder: flat, brushed, polished, ringed or lacquered Packing of Aluminum Tube: Tubes are covered by PE film first, then packaged in carton Lead Time: 15 days for sample; About 25-35 days for one 40HQ container Payment Term: T/T, L/C, Western Union
SP(2-8) automatic metal strip cutting machine supplier Coil thickness: 2.0-8.0mm Coil width:500-2200mm Productin speed:20-60m/min Pipe material: HR, CR, PPGI, GI,AL,CU,etc Product description: SP(2-8) automatic metal strip cutting machine supplier is applicable to coils of various specifications with the thickness of 2.0-8.0mm and width 500-2200mm. metal strip cutting machine supplier can p SP(1-8) automatic strip cutting machine suppliers is applicable to coils of various specifications. It is used for cutting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such as proper layout, easy operation, highly automated and high production efficiency. Process Flow of metal slitter machine Raw material platform carrying coil car hydraulic uncoiler feeding guide plate pair pinching roller, five rollers leveling coil head cutting front looping table side guiding table pinching machine disc slitting curling machine back looping table pre-feeding coils tension table rewinding discharging car hydraulic bracket Electric control.
SP(2-10) steel metal slitting machine manufacturers Coil thickness: 2.0-10.0mm Coil width:400-2200mm Productin speed:20-60m/min Pipe material: HR, CR, PPGI, GI,AL,CU,etc Product description: SP(2-10) steel metal slitting machine manufacturers is applicable to coils of various specifications with the thickness of 2-10mm and width 500-2200mm. metal slitting machine can produce HR, CR, PPGI, SP(2-10) steel metal slitting machine manufacturers is applicable to coils of various specifications. It is used for slitting the coil into required width for the use of punch line through the procedure of uncoiling, pre-leveling, cropping, slitting and recoiling. It has advantages such as proper layout, easy operation, highly automated and high production efficiency. Process Flow of metal slitter machine Raw material platform carrying coil car hydraulic uncoiler feeding guide plate pair pinching roller, five rollers leveling coil head cutting front looping table side guiding table pinching machine disc slitting curling machine back looping table pre-feeding coils tension table rewinding discharging car hydraulic bracket Electric control
Daiwa catalina spinning reels Description Classical and reserved in looks, yet bold and extrovert in performance and features few heavy-duty spin reels can match catalina for power, precision and price. Hi-end performance blended with quintessential daiwa class and value catalina draws its design cues and inspiration from daiwa’s flagship heavy-duty super reel, saltiga, to deliver anglers a reels that’s feature loaded, performance packed and value laden. Hi-end quality and class at an affordable price, few reels stand and deliver with the authority and integrity of this monochromed super reel. Features Real four Mag sealed Zaion air rotor Utd – ultimate tournament drag Hyper digigear Twistbuster ii Tough air bail Minimum offset gearing Abs ii Super metal housing (body and sideplate) New crbb system Silent oscillation Rotor break Manual bail return Water tight wide open roller for heavy shock leader Bb line roller with rubber seal Linear rotation Lightweight eva handle knob
Product name: Flow-through Racking, Flow through rack, storage through racking, warehouse rack system. By using composite racking and roller fluency rail system, impose the goods’s self weight to achieve goods “ first in and first out” principle. It is suitable for place of assembly line,logistic distribution center, convenient storage, save space and upgrade efficiency. Features: 1. Using aluminum or steel rail system, and the influence of gravity, first in and first out principle for the goods is implemented. 2. Its widely used in supermarket, medicine, and chemical and electron industries. 3. Major components of flow-through racking include the body, rail track, hoop, and roller and so on. 4. Convenient to access and suitable for such places as the two sides of the assembly line and distribution center. 5. Mark: Non-standard specification is available. Sample : we will send you sample for your reference, but have to pay from your side; we will refund the fee once you have an order with us!
E piled up to 1.8m. 4. Bottom sheet is automatically fed; the two sheets are piled freely; high efficiency 5. Advanced elastic front register is used for location, high register precision, bottom paper will never exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted. 7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running. 8. The whole machine adopts plc control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm. 9. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade 10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently. 11.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning.
Er exceed. When laminating, it is very easy to make top paper and bottom paper alignment, or top sheet exceeded. 6. Fully automatic glue supply system: glue will be automatically supplied during lamination, and recovered, avoiding glue wasted. 7. Scientific design for linear speed of metering roller, avoiding glue thrown when high-speed running. 8. The whole machine adopts plc control system, compared with other time-delay device or middle relay control, the bottom paper is transferred more precise and stable, furthermore, speed is greatly increased, and circiut breakdown can automatically display and alarm. 9. Clean the lower roller in gluing section by blade with circulated water, complete cleaning, convenient to replace the blade 10. Floating movable pressing section is adopted to make the laminated paperboard smooth. This section can be moved front and back to take in paper conveniently. 11.. Gear rach is used to control the lift of water tray, which is easily taken out for cleaning.
• 2-Roller Cold and Hot Lamination; 4-roller for option • Pouch Size: A3/A4/A5/A6/Card and Max Up to 328mm • Hot Pouch Thickness: 80/100/125/150Mic • Ready time: 3-6 minutes for 80 Mic pouch • Max Laminating Thickness: 0.6mm (Interlayer and Pouch) • Lamination speed: 300mm/min/50Hz or 360mm/min/60Hz • Reverse and Forward, Clearing Jams Automatically and Easily • One Touch Button for All Operation, Easy Use • Auxiliary Heating Device, Keeping First Lamination Flat and Perfect • Precise Temperature Control within 2 centigrade, Guaranteeing Perfect Lamination • Auto shut-off after 60 minutes, for enhanced safety, to save power • Continuous Lamination Capacity Available • PWA frequency Adjust saving up to 30% power consumption • Acoustic Reminder: Beep upon Start, Ready and Auto Shut-off • Dynamic Optical Indication: LED Flashes upon Start, getting ready and Auto Shut-off. Unit weight and size: 2.1kg, 446*145*100mm Gift box size: 365*110*160 mm Carton size and pack: 380*345*340 mm / 6 units per carton N.W./G.W.: 8.4Kg/9.0Kg Container load by 20ft/40ft/40HQ: 3384/6912/8064 PCS.
Adopting hearing-medium conduction technology with heating oil as medium,the plant is a new generation product developed exclusively in China based on the advanced structure of existing plants from domestic market and abroad.If offers an ideal solution for lower power consumption and overall production cost,and keeping the same surface color for all biscuits.The plant mainly consists of mixing system,automoatic feeding system, tunnel-type oven, sheet feeding and cooling device,coating machine,cutter and organic heating medium boiler, ect.With compact structure and unique reliability, the plant is one of the most preferred equipments in foodstuff industry. 1. Blender Machine: The machine is the mixing system, the first technology processing equipment in wafer manufacturing. It adopts the separate delivery and automatic circulation system. Material: the machine frame is made of steel with international standard and the cover adopts imported 304 stainless steel plate with thickness of 1.2mm Twin mixing barrels made of imported 304 stainless steel plate with thickness of 3mm, Mixture pump (Guangzhou) Electrical appliance switch (Schneider of Germany), Electrical machine (SEW of Germany) Main technical parameters: Mixture quantity per time: 60kg/flour 25kg Power consumption: main electrical machine 380V 3KW 2900r/min Mixture pump electrical machine: 380V 0.75kw 2. Cream Mixer: The machine mixes the sugar, butter and other matters abundantly according to the technology prescription. Materials: the machine frame is made of steel with international standard and the cover adopts imported 304 stainless steel plate with thickness Cream barrel adopts imported 304 stainless steel plate with thickness of 3mm Electrical machine (SEW of Germany), Decelerating machine (SEW of Germany) Main technical parameters Drive electrical machine for cream spreading roller: GGWB-0.75-40 Drive electrical machine for convey belt and wafer block pressing roller: GGWB-0.75-40DII Drive electrical machine for to-and-fro laminating machinery: GG802-4 0.75KW Power of thermoelectric tube for cream spreading roller and cream mixing roller: 220V 0.3KW2 3. Mainframe Oven: As the most important equipment of full-automatic wafer production line, tunnel gas baking machine has extraordinarily outstanding performances with the main characters as follows: 1. Unanimous heat colors of wafer block. Thanks to the scientific selection of heating components, superior material selection for baking plate and reasonable die carrier structure, the heat colors of the center and periphery of the wafer block having been baked are unanimous. 2. High rate of certified products with finished product rate of not less than 98%. Because of uniform heating and unanimous heat colors, the demoulding rate of biscuit is high with improving rate of certified products accordingly. 4. Wafer Sheet Cooling Machine: The machine runs slowly to cool down and convey the wafer block. Materials: The machine frame is made of steel with international standard and the cover adopts imported 304 stainless steel plate with thickness of 1.2mm and ¦µ6 stainless raw material. The machine runs slowly to cool down and convey the wafer block 5. Cream Spreading Machine: The cream is applied, laid up and laminated automatically and regularly before the wafer block is sent to the conveying belt. 1 Frame: Material with international standard 2The cover adopts imported stainless steel plate 3 Convey belt:Italy 4 Continuously variable transmission: Germany SEW 5 Converter: Japan's Mitsubishi 6 Process controller: Siemens of Germany 7 Photoelectric switch: German Schneider Main technical parameters Drive electrical machine for cream spreading roller: GGWB-0.75-40DII Drive electrical machine for convey belt and wafer block pressing roller: JWB-0.75-40DII Drive electrical machine for to-and-fro laminating machinery: Y802-4 0.75KW Power of thermoelectric tube for cream spreading roller and cream mixing roller: 220V 0.3KW2 6. Conveyor: Wafer conveyor:delivering the wafer which has passed through the cream spreading,layup and lamination procedures to the cutting machine. Technical parameters£º electric motor£º380V 0.25kw 7. Wafer Cutting Machine: The machine is equipped with to-and-fro conveying belt and it can cut the wafer block to all sizes. Materials: the machine frame is made of steel with international standard and the cover adopts imported stainless steel plate Procedures controller (Siemens of Germany) Proximity switch German Schneider Electrical machine (German SEW), Electrical machine power: 380 0.75W N=1400r/min Decelerating machine type: I=24:1 a. The largest cutting height 55mm b. Cutting the minimum height c. Cutting Size : Each cutting machine of the two specifications, the other may choose d. cutting by Steel wire ,the Line diameter of the steel wire: 0.3mm and 0.5mm can be Optional 8. Swashing Machine: This machine is a kind of supplementary equipment and utilized for waste recycling. Material: the machine frame is made of steel with international standard, and adopts imported 304 stainless steel plate with thickness of 3mm Electrical machine (SEW of Germany) Electrical machine power: 380V, Y112-4, 4kW, 50Hz 9.Packing Machine: Model: GGPA-2005 Packing Speed: Maximal 15-100 package/Minute Packing Width: Maximal 400mm Cutting Length: 90-9999 mm Packed 'size: Width :140mmHeight :60mm Weight: About 450 kg Voltage : Three phase ,380V,50HZ Power : 4 kw wooden packing as export standard.
Parameter: 1.Suitable to process:colored steel plate, galvanized board, aluminum sheet 2.Width of the plate:1250mm 3.Rollers: 12 rows 4.Rolling material: Forging Steel 45# 5.Rolling galvanization thickness:0.05 mm 6.Material of the cutting blade :Cr12 7.Hydraulic oil :40# 8.Dimensions:7.4*1.55*1.51m 9.Power:4+4kw 10.Thickness of the plate:0.3-0.6mm 11.Productivity:0~3m/min 12.Diameter of the roller:70mm 13. Weight:About 4.2T 14.Voltage:380V 50Hz 15.Processing precision : within 1.00mm 16.Transportation:one complete equipment need one 40feet container to hold 17.Orders & Payment Term :30%deposit,and balance before delivery 18.Equipment components: Man-made uncoiler--Roll forming machine--computer control system,hydraulic control system--press forming--cutting 19.Standard components: Chain 1 pc, Hydraulic oil pipes: 2 pcs, electromagnetism valves 1 pcs. limit switch:2 pcs,counter: 1 pcs relay: 2 pcs 20. This products used in tour beauty spot,hotel,exhibition,holiday village building.