Heat pipe vacuum tube technical parameter Model: hp58/1800-20 l / 0.43 mm Outer tank material/thickness: sgcd/ 0.5mm Angle of collector: 25-85 ¡ã Rated pressure: 0.7mpa Heat pipe material: copper; 14/24 mm condenser diameter, 1800 mm pipe length. Insulation material and thinness: polyurethane foam, 50 mm Seal: silicon rubber polymer Manifold material: aluminum alloy Tank capacity: 100, 150, 180, 200, 250, 300 lite Advantages: 1. Adopts red copper channel, with great performance of heat exchange 2. Utilize copper heat pipes containing special medium liquid with low boiling point. 3. Work well in all climate, can be function well even in ambient temperature 4. Each heat pipe tube works independent and efficiently and easy to change if necessary. 5. No water flows inside the vacuum tube, no risk of freezing. Working principle: 1. Solar absorption: solar radiation is absorbed by the evacuated vacuum tubes and converted into heat. 2. Solar heat transfer: heat pipes conduct the heat from within the solar tube up to header. 3. Solar energy storage: water or water mix is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oc / 9-18of. Throughout the day, the water in the storage tank is gradually heated. Packing :standard export carton with foam or wooden box Delivery: 10-15 working days We offer products which are designed with your specific requirement in mind. Package: standard cartoon box Min order: 2 pieces
Scm Products detail: This is a split pressurized thermal collector, adopting vacuum tube heat pipe technology, is widely used for residential water heating, it's easy to install the tubes. Daily output of each tube is more than 2.6 gal per day. In some southern states, this number can be expanded. Service life of this collector can be 20 years plus. More technology data of this product please feel free to find on the products section or you can download our catalog and get more details. Manifold size 120*105 mm Pipe diameter / thickness 35/0.8 mm Interface 32 mm/ 3/4 inch Material aluminum alloy Heat pipe 14*70/8*1650 mm Vacuum tube 58/1800*1.8 mm Thermal material rock wool Absorption 94% Exchange efficiency 42% Max flux 0.58l/s Running pleasure 0.6 mpa Max idle temp 270 degree c Model number number of tubes absorber area daily output(131 degree f) Scm15-58/1800 15 pcs 1.95 m2(20.99 ft2) 105-150 l(30-40 gal) Scm20-58/1800 20 pcs 2.60 m2(27.99 ft2) 140-200 l(40-50 gal) Package volume: 0.288 cubic meter, gross weight: 58kgs
Jiuyang Flat-plate solar ollector Type: Magnetron sputtering coating, Black chrome coating, Anodized coating 1: Motor-pipe -Copper Õ25¡Á0.6 mm 2: Sub-pipe -Copper Õ12¡Á0.45 mm 3: Wings-Aluminum Õ0.25¡Á140mm, Copper Õ0.15¡Á140 mm, Aluminum Õ0.25¡Á140 mm 4: Absorbed coating, Magnetron sputtering coating, Black chrome coating, Absorption 93%-95%, Anodized coating, Absorption 95%, Emissivity 8-10%, Absorption 92%-94%, Emissivity 5%, Emissivity 20%. 5: Daily water production in fine weather in the Spring and Summer - 90-100L, 90-100L, 85-95L 6: Cover material - 4mm tempered glass 7: Frame Colored Aluminum alloy 8: Back plate galvanized sheet Ä0.3 9: Insulation Rock Wool 10: Test pressure- 0.9MPa 11: Life - Above 30 years 12: Welding performance- Copper and copper free silver soldering, to adapt to the temperature of 500 degrees below. Seaworthy package.
Skylight Flat Plate Collector Technical Parameter 1. Sky/light Dimension (L*W*H) mm: 2000*1060*70/ 2000*1060*80/ 2000*1060*90 2. Skylight Core: all copper, ultrasonic welding 3. Skylight Coating: black chrome/ Blue titanium 4. Skylight Absorber material &thickness: copper, 0.15mm 5. Sky*light Header pipe material, dimension and quantity: copper T2; ª¦25*0.6*1060mm; 2pcs 6. Skylight Riser pipe material, dimension and quantity: copper T2; ª¦10*0.5/ª¦12*0.6mm; 8pcs 7. Skylight Material & thickness of glass: tempered glass: 4mm /fabric tempered glass: 4mm/low iron fabric tempered glass: 3.2 8. Sky*light Material & thickness of frame: aluminum, 0.8mm 9. Skylight Insulation of material: high pressure high density polyurethane foam 10. Skylight Insulation thickness mm: 30 11. Sky+light Material & thickness of the back sheet: embossed aluminum, 0.3mm 12. Skylight Packing: carton 13. Sky-light Packing dimension (two pieces in one carton): 2020*1100*160/ 2020*1100*180/ 2020*1100*200 14. Sky-light Net weight: 32kg/33kg/35kg 15. Sky=light Qty of 20' container: 165/145/130pcs 16. Sky*light Qty of 40' container: 340/306/276pcs 17. Sky-light Qty of 40H' container: 390/346/306pcs Carton
Products intro Sc-c01 Sc-c01(separate pressurized solar collector) The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style. Can endure high pressure when it works. Module design, optional combination, which can meet the demand of large water consumption. Material: aluminum alloy Solar vacuum tube with heat pipe A) size: 58 x 1, 800mm B) qty of tube: 15 / 20 / 25/30pcs C) hail resistance: diameter 25mm Insulation layer in chest A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam B) heat preservation: 72 hours Max. Pressure bearing: 0.6mpa Iso9001 / ce certificate/en-12975 3 years international responsibility for free repairing or exchange due to original quality problems 1, manifold : red copper 2, manifold casing: aluminum alloy 3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m 4, heat preservation: 72hrs 5, hail resistance: 25mm 6, max pressure: 10 bar 7, working pressure: 6 bar 8, coating of vacuum tube: ss-c/cu 9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system. High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.
Products model: sc-b01p»G+dåsolar collector for balcony systemp»G+GǦ Products intro Sc-b01 Pipeline is made of all red copper and conducted by heat transfer medium liquid To save place and simple to install Suitable for families who can not put vacuum tubes on their roofs Stable and reliable performance Fashionable and beautiful It is harmoniously blended with architecture Environmental protection and energy saving * material A) inner water tank: imported sus304 stainless steel B) outer water tank: galvanized steel alloy C) bracket: aluminium alloy * solar vacuum tube with heat pipe A) size: 58 x 850mm B) qty: 8 / 10 / 12pcs C) hail resistance: diameter 25mm * temperature insulation layer A) 50mm thickness imported polyurethane, machinery overall for keeping same temperatureand high pressure foam B) temperature conservation: 72 hours* capacity: 80 / 100 / 120 liters * max. Pressure bearing: 0.6mpa * iso9001 / ce certificate/en-12975 * 3 years international responsibility for free repairing or exchange due to original quality problems
Millionsun black flat plate collectors are manufactured according to European quality standards. By introducing black Chrome coating layer and applying ultrasonic welding technology, our products, with stable quality and solar keymark certificate, have been sold in batches to European markets. Featuring optimal and reasonable structures, fine appearance and easy installation, our products are well combined with buildings and applicable to household and scaled systems. Millionsun solar flat plate collector can be used in both closed and open circulation systems.The collector is designed to connect to multiple collectors easily, to make up a large collector field, it also can be used in different solar system.
Millionsun black flat plate collectors are manufactured according to European quality standards. By introducing black Chrome coating layer and applying ultrasonic welding technology, our products, with stable quality and solar keymark certificate, have been sold in batches to European markets. Featuring optimal and reasonable structures, fine appearance and easy installation, our products are well combined with buildings and applicable to household and scaled systems. Millionsun solar flat plate collector can be used in both closed and open circulation systems.The collector is designed to connect to multiple collectors easily, to make up a large collector field, it also can be used in different solar system.
Millionsun black flat plate solar collectors are manufactured according to European quality standards. By introducing black Chrome coating layer and applying ultrasonic welding technology, our products, with stable quality and solar keymark certificate, have been sold in batches to European markets. Featuring optimal and reasonable structures, fine appearance and easy installation, our products are well combined with buildings and applicable to household and scaled systems. Millionsun solar flat plate collector can be used in both closed and open circulation systems.The collector is designed to connect to multiple collectors easily, to make up a large collector field, it also can be used in different solar system. Millionsun Solar flat collector manufacture line start to made solar flat collector at 2002, there is 50000 sqm for the manufacturing place. We have 1 Black absorber coating production lines, black absorber coating annual production capacity over 1 million sqm, we hold black absorber coating market capacity of 30% in china. We have 2 ultrasonic welded production lines and 1 laser welded production lines, We supply all kinds of flat plate solar collector to client, workshop manufacture 20000 sqm flat per month, annual production capacity over 200000 sqm flat collector. Clean and tidy production environment, Automatic production line, well-established technological process, Strict quality control and regulate the delivery process, ensure quality qualified rate 100% solar water system to customers and without error delivery rate.
Specifications Type: Flat-Plate Pressure: Pressurized Circulation Type: Indirect / Closed Loop (Active) Heating System: Thermosyphon (Passive) Connection Type: Direct-Plug Installation: Freestanding Housing Material: Stainless Steel Certification: CE, RoHS, UR Place of Origin: Shandong, China (Mainland) Brand Name: BTE & OEM & ODM Model Number: BTEB-I/0.6-L-2.0 Product name: China glazed flat-plate solar collector for sale Item: solar collector Application: Shower Use: Energy Saving Product Frame: 1.0mmAluminum Name: Flat Plate Solar Collector Absorption area: 1.89 Cover material: 3.2Low-iron tempered -glass Packaging & Delivery Packaging Details: Packaging Details:water tank is 1 PC/Carton, solar panel is 1 PC/Carton. Sample put in wooden case, Standard package carton for sea delivery. Delivery Detail:within 5 days after received part of deposit Delivery Detail: 5 days
Key points High performance evacuated tube collectors Can be mounted free-standing or on a pitched roof, easy to install, simple roof fixings Heat pipe - offer low maintenance No water in the vacuum tubes, no freezing problem in winter, can be used in cold area. One broken tube will not affect the function of the system. 3 years warranty, 20+ years lifespan Market leading efficiency/output Triple layer selective absorber coating, absorption coefficient 94% Evacuated tube outer tube thickness 1.8mm 14mm high conductivity heat pipe condenser, Nick-coated condenser surface. Aluminum frame, strong structure, light weight. High and constant pressure of polyurethane foaming technology ensure the outstanding insulation quality. Principle: Evacuated tube solar collector use evacuated tubes to absorb solar energy then transfer energy to heat pipe via aluminum fin, when heat pipe is heated and working liquid vaporize and rise to top of heat pipe condenser (condenser is inserted into the mainfold port inside the solar collector manifold), when the heat pipe condenser meet cold water flow inside the manifold port, the working liquid will cool down and fluidify return to the bottom of heat pipe, so time and time again repeat this process, finally cold water(glycol) inside the manifold port be heated. Technical data: Model BSSC-10 BSSC-12 BSSC-15 BSSSC-18 BSSC-20 BSSC-24 BSSC-30 No. of collector pipes 10 12 15 18 20 24 30 Gross area(m2) 1.68 1.99 2.52 2.95 3.24 3.84 3.84 Absorber surface(m2) 0.87 1.04 1.30 1.46 1.62 2.08 1.94
Blue Coating Features: *Germany high selective blue coating applied for the absorber; *Laser welding between full aluminum absorber and copper tubes ensure good conductivity of heat and firm structure; *Low iron tempered textured glass with high transmittance up to 92%; *Super large effective heat absorption area offers higher heating efficiency and more energy saving; *25 years design life span with max 0.8Mpa pressure; *Have passed EN12975-1, 2, ISO9806-1 tests; *Solar Keymark, SRCC certificated. Packing: Carton Dimension:2000*1000*80
Flat plate solar collector 1. The Characteristics of Solar Collector 1) The fin is red copper strip with vacuum sputtering coating, and it has an excellent heat efficiency and a long life span. 2) The fin and riser pipe adopts ultrasonic welding, it has less weld seam and higher bearing strength. 2) The absorber covered by 4mm flat tempered glass with high transmission and good heat-insulating. 3) The heat transfer medium adopts special heat-conducting fluid, which can work with low ambient temperature and ensure a quick heat transfer. 4) The insulation is polyurethane with excellent heat-insulating, gives more protection for collector performance. 5) The frame is aluminium alloy with good resistance and nice outside, and easy to mount. 6) The connection including header pipe, riser pipe and screw is all copper, with high-elastic gasket, and the aging and leaking can be avoided perfectly. 2. Parameters Description Specification Cover Cover number Cover material Tempered glass Cover thickness 4mm Cover transmission 92% Absorber Material Red copper (TP2) or Aluminium
Blue titanium aluminum solar coating It's used as a main part of solar absorber with black chrome , which remarkably improves light performance of solar absorber and is clearnly produced. Parameter list 1Width125-1250mm 2LengthCustomized 3Thickness0.3/0.4mm 4Place of originChina (mainland) 5Brand nameGk 6CertificationIso9001:2008;patent for invention 7Service life25 years 8CategorySolar absorber part 9Substrate materialAluminum 10Light performance indicatorAbsorptivity=93.5% 11Emissivity=8% 12Corrosion resistanceSalt-fog test=72h 13Anti-fatigability and heat&humidity resistanceHeat and moisture test=72h 14Cohesive forceConforming to gb5270-85 15PortShenzhen 16Moq100 square meters 17Supply ability120000 square meters per month 18Payment termsL/c, d/a, t/t, western union, moneygram, escrow 19Packaging detailsWooden box 20Delivery detailsWithin 7 days upon the receiption of deposit or l/c at sight
Millionsun blue absorber flat plate collectors are manufactured according to European quality standards. By introducing BLUETEC coating layer from Germany and applying ultrasonic or Laser welding technology, our products, with stable quality and SRCC and solar keymark certificate, have been sold in batches to European markets.Featuring optimal and reasonable structures, fine appearance and easy installation, our products are well combined with buildings and applicable to household and scaled systems. Millionsun solar flat plate collector can be used in both closed and open circulation systems.The collector is designed to connect to multiple collectors easily, to make up a large collector field, it also can be used in different solar system.
Millionsun solar water heater parts blue absorber flat plate solar collectors are manufactured according to European quality standards. By introducing BLUETEC coating layer from Germany and applying ultrasonic or Laser welding technology, our products, with stable quality and SRCC and solar keymark certificate, have been sold in batches to European markets.Featuring optimal and reasonable structures, fine appearance and easy installation, our products are well combined with buildings and applicable to household and scaled systems. Millionsun solar flat plate collector can be used in both closed and open circulation systems.The collector is designed to connect to multiple collectors easily, to make up a large collector field, it also can be used in different solar system. Millionsun Solar flat collector manufacture line start to made solar flat collector at 2002, there is 50000 sqm for the manufacturing place. We have 1 Black absorber coating production lines, black absorber coating annual production capacity over 1 million sqm, we hold black absorber coating market capacity of 30% in china. We have 2 ultrasonic welded production lines and 1 laser welded production lines, We supply all kinds of flat plate solar collector to client, workshop manufacture 20000 sqm flat per month, annual production capacity over 200000 sqm flat collector. Clean and tidy production environment, Automatic production line, well-established technological process, Strict quality control and regulate the delivery process, ensure quality qualified rate 100% solar water system to customers and without error delivery rate.
Difference between three high efficiency solar vacuum tube (effective tubes, high cold tube, high temperature special efficiency tube)and ordinary tube: Absorption of heat membrane layer is difference between these two kind of tubes. (Absorption of heat membrane layer is the key part of vacuum tubes.) Absorption of heat membrane layer of three high efficiency solar vacuum tube is interference membrane, common tube is gradient membrane. The difference is mainly for interference membrane and the gradient membrane distinction. 1. Fundamental distinction: membrane layer structure is different, the principle of the absorption of sun's rays result in differently. gradient membrane, for multilayer, its absorbing layer is generally 9 layers. It to the sun's rays are layered absorption, and its absorb the light performance gradually become tall. Because the gradient structure, launch with increasing temperature rise than work, that temperature in 300 to 500 C than when launch greatly increased. The aluminum ions and absorbing layer in high temperature condition, lively nature greatly enhance the, and develop a drift. This happened in the internal structure of membrane layer caused confusion, coating began to aging. In the long run, the high temperature condition, membrane layer can fall off, thereby affecting the vacuum tube heat efficiency and life integrating. Interference membrane, its absorbing layer altogether 2 layer, among two layer membranes, because the metal content between the different and interfere ratio effect, make absorption ratio increase, launch ratio decrease. Plus effect of reduce emission from minus reverse layer, thus achieve more higher absorptance and reducing the role of launch ,greatly improved collection thermal efficiency. 2.Features: Absorptance of three high efficiency solar vacuum tube increased by 12%, and launch reduced by 30 to 40 percent, the super absorbing, heat loss less, warming faster. Efficient tube, the super absorbing, thermal efficiency is high, warming faster, in the same light conditions, can create more and higher temperature water than common tubes ; high cold tube, copper ions for the launch of aluminum ion mantua, so low 0.2 thermal loss rarely, in high cold environment can still work normally. hot water turn out as usual under- 30 C. high temperature special efficiency tube, because the membrane layer stainless steel ion high temperature resistant, fight air drying. Membrane layer under the condition of the 400 C, not attenuation, not aging, discoloration. In the same light conditions, ordinary tube heat absorption is lower than three high efficiency solar vacuum tube, can't even meet requirements that wash bath; In lower temperature, heat loss is bigger, collection hot effect is reduced, affect the normal use; Especially in the empty sun over 270 C, membrane layer began to aging, fall off, absorption rate drastically reduce, life shortens greatly. 3.Technology: high temperature special effects tube, high cold tube, efficient tube used respectively to three target, double target, single target magnetron sputtering craft; Ordinary tube typically use the single target magnetron sputtering technology. 4, appearance: A, Mouth of tube, here membrane layer above 800 C high temperature condition sealing off part is inevitable. As high temperature special effects tube has high temperature resistant, only 1 cm long without membrane layer in mouth of tube, while others without membrane layer for without high temperature resistant, tube membrane layer falls off the length is about 2.5 cm B, Inner tube color: with macroscopic observation, high-temperature tubes and high cold tube for internal color is kermesinus (for membrane layers bottom is copper); the bottom And efficient tube and ordinary tube are white (for membrane layer bottom is aluminum). Anyhow, interference membrane is the new breakthrough basis of gradient on membrane technology ,it is the great innovation in coating technology progress and become current global, interference coating of the most advanced coating technology. But also to the vacuum coating technology bring epoch-making change. Especially with the high temperature effects made interference membrane, can also be used for cooling tube, dry, seawater desalination, opened up the update for vacuum tubes wider application fields. Solar collector tube introduction Feature: 1 Quality warranty :15 years Quickly thermal collecting efficiency. It works fine under cold weather and area. Three kind of solar collector: Common :evacuated collector tubes. High-efficiency: Three-target evacuated collector tubes: blue and black-golden High-efficiency: Three-target evacuated collector tubes: purple-golden (purple and golden) Solar evacuated collector tubes technical data: Dimension: 47: 58 Material of tubes: 3.3 high borosilicate: 3.3 high borosilicate Glass expansion ratio: 3.3¡¾0.1X10-6 k-1: 3.3¡¾0.1X10-6 k-1 Outer diameter of tubes: 47¡¾0.7: 58¡¾0.7 Inner diameter of tubes: 37¡¾0.7: 48¡¾0.7 Thickness of glass: 1.6¡¾0.15: 1.6¡¾0.15 Transmittance: 0.89: 0.89 Selective coating: SS-CU-AL-N/AL: SS-CU-AL-N/AL Adsorptivity: 0.86(AM1.5): 0.86(AM1.5) Emissivity: 0.080(80¡¾5): 0.080(80¡¾5) Vacuum degree: 5.0 X 10-3Pa: 5.0 X 10-3Pa Collecting performance under sunshine: 190m2/kw: 190m2/kw Hailstone resistance: 25mm: 25mm Start up fast and collect solar energy fully Unique super pure copper surface,allowing reflection and minimal heat loss. High level vacuum ensure operation under cold weather. Long time warranty to 15 years. 10pcs/Carton. Applications: superior heat resisting products and crafts. 15-20KG/Carton.
Millionsun blue absorber flat plate collectors are manufactured according to European quality standards. By introducing BLUETEC coating layer from Germany and applying ultrasonic or Laser welding technology, our products, with stable quality and SRCC and solar keymark certificate, have been sold in batches to European markets.Featuring optimal and reasonable structures, fine appearance and easy installation, our products are well combined with buildings and applicable to household and scaled systems. Millionsun solar flat plate collector can be used in both closed and open circulation systems.The collector is designed to connect to multiple collectors easily, to make up a large collector field, it also can be used in different solar system.
Data Model NO. : EPDM3000 Material: NBR + PVC Size: 1330*3000mm Qty Per 20ft Container: 230 Hardness: 65 ±5 Net Weight: 2.86Kgs/ Weight after fill in water: 4.61Kgs/ Tensile Strength: 6.0 250 Mpa Elasticity: 70%
The heat pipe solar collector is one important part for the split pressurized solar system. This is consisted of great efficiency heat pipe and glass vacuum tube, with a great efficiency of heat collecting. This systems is mainly positioned on the roof or in the garden. And as this system is split with the water tank, so it's not heavy and looks very beautiful. This type system is now very popularly used in Europe, America and Australian countries. How it works The heat pipe solar collector absorbs solar heat mainly by the vacuum tube and the heat pipe. When the vacuum tube absorbs solar heat, it transfers the heat to the aluminum fin inside, and the aluminum fin is in good touch with the heat pipe, so it transfer the heat to the heat pipe. As soon as the heat pipe is heated, the liquid inside it will become steam and rise up to the condenser part, and release the heat to the water that goes through it, and then the steam will become liquid again and restart the circulation.
