Tadano GT500E construction machinery,hydraulic truck crane,used crane engine: Nissan Capacity: 50 ton 5-section "U" boom 4 outrigger, with front jack
Crawler crane, mobile crane. Truck crane
Tower crane Tower crane is normally packed in containers
Mast section specifications are devided into three specifications as follows:800*800*1508, 650*650*1508 and 900*650*1508.Types of structure have SCD dual drive,counter weight,no counter weight of SC treble drive,GN3,upper-setting and frequency conversion control,etc,varieties. The equipment is applicable to bridges,chimneys,mansions of more than 60m,etc,construction staff and material handling of tall building,also which is used for warehouse and wharf,etc places and for vertical transportation too.
Crane and hoist Chain hoist and wire rope hoist
Main parameters of qtz63 Rating load moment 630 kn.M; max.Load capacity:6t; max.Radius:50m; ratad roadcapacity at max.Radius:1.3t; independent height:40m; trolley speed: 21/42m/min; hoisting speed:8/40/80m/min(a=2); swiveling speed: 0.6r/min ; climbing speed:0.4m/min; motortotal power: 36.4kw; working volt: ~380vfa5% 50hz; working temperature: -20f¦f++40f¦
Tower crane
Main parameters of qtz 80/100/125/160 series of the tower crane : Rating load moment :800/1000/1250/1600kn.M, max.Road capacity:6/8/10t, max.Radius:56/60/65m, ratad road capacity at max.Radius:1.3/1.5/1.6t, independent height:45/50/51.8m, attached height:150/120/163/200m, trolley speed: 21/42/7.5/30/60m/min, hoisting speed: (a=2)ú¦8/40/80, 25/50/100, 35/73/100m/monú+(a=4):4/20/40, 12.5/25/50, 17/36/55m/min, swiveling speed:0.6/0.62r/min climing speed:0.4/0.6m/min, motor total power:36.4/19.7kw, working volt:380vía5% 50hz, working temperature: 20íµí++40íµ
Kato 50ton Nk500e 5booms+2 fly jib Mitsbishi chasses Rear cab all computer-controlled, With original a moment limiter system for crane. 5 large booms all computer-controlled, 2 section outriggers Kato 50ton Nk500e 5booms+2 fly jib Mitsbishi chasses Rear cab all computer-controlled, With original a moment limiter system for crane. 5 large booms all computer-controlled, 2 section outriggers If intrested consult by +86-13761197918
Model:qtz160 Jib length:60m Independent height:60m Attached height:200m Standard knot(m):1.83*1.83*2.5 Max tip load(t):2.0 Max load(t):10 Price: Fob qingdao 143283usd
Detailed product description and specifications: 1.Rating moment:1250KN.M 2.Max. Lifting capacity(The end lifting weight):10T 3.Max. Working range:65m 4.The end lifting weight is 1.6T 5.The lifting height is 50m when freestanding(suitable for the construction of buildings lower than 16 storeys),and can reach 100m (at ratio 4) and 163m(at ratio 2) when adhered (suitable for the construction of buildings lower than 32 and 52 storeys respectively). 6.The lifting height of QTZ125.The structure of this tower cranes is rational,for the main functioning steel parts,such as the tower and the crane,are made up of seamless steel tubes with proper handness,little wind resistance and a pleasant appearance. 7.QTZ125 tower crane adopts the jinkui brand electric parts which are famous in China.These high-quality parts can serve for a long time,reducing breakdowns and improving efficiency. 8.QTZ125 tower crane has helmet structures with two hoisting points,hoists with upper slewing liquild pressure,and it can be installed quickly and conveniently. Festival standard specifications(m):1.835í-1.835í-2.5
Tower crane Tc series of tower cranes and tcp series tower cranes & placing boom are self-climbing tower cranes with an upper slewing mechanism, a trolley mechanism and a horizontal jib. Tower crane series contain many types, such as tc5013, tc5015, tc5613, tc5023, tc5518, tc6020, tc7030, tcp5613/38, tcp5023/38, etc. Using plc intelligent system in electric control system, stepless speed regulated and frequency altering in slewing mechanism, trolley mechanism and the hoisting mechanism also.... The hoisting mechanism Double-speed coil winding rotor braked by eddy to alter speed or stepless speed regulated and frequency altering are used in the system. Big strong drum with lebus groove. The slewing mechanism Stepless speed regulated and frequency altering make starting and braking smoothly and position correctly and rapidly. The performance and operation is advanced in the world. The trolley mechanism Stepless speed regulated and frequency altering. Running with less impact and operating smoothly. Control system Plc intelligent control system can self-diagnose electric fault and give corresponding alarms with different sounds and lights. The main electric elements are using world-renowned products. Tower crane model hoisting moment kn.M working radius m max. Weight/ weight at the max. Radius m hoisting height hoisting speed m/min swing speed r/min radius-changing speed m/min mast section Anchoring m climbing m Qt20a 200 2.5-30 2/0.63 26 50 25/12.5 1.4 38 angle iron Qtz315a 315 2.5-38 3/0.77 28 70 7/21/42 0.46/0.7 33/16.5 angle iron Qtz315d 315 2.5-43 3/0.7 25 100 7/21/42 0.46/0.7 33/16.5 angle iron Qtz4807 400 2.5-48 4/0.8 28.3 120 8/34/70 0.46/0.7 33/16.5 angle iron Qtz63a 760 2.5-50 6/1.3 40 140 7/21/42 0.6 44/22 angle iron Qtz5510 710 3-55 8/1.7 40.8 151 80/41 0.46 44/22 angle iron
Tower cranes The length of jib is 60m Model qtz160(6518 6515 6024) Maximum rated torque(kn.M) 1600 1600 1600 Maximum lifting load (t) 10 10 10 Maximum working amplitude (m) 3-65 3-65 3-65 Hoisting height (m) independent 50 50 50 Attached 200 200 200 Payload capacity at maximum amplitude (t) 1.8 1.5 2.4 Hoisting speed m/min a=2 100/50/7.4 100/50/7.4 100/50/7.4 A=4 50/25/3.7 50/25/3.7 50/25/3.7 Radius changing speed m/min 50/25/15 50/25/15 50/25/15 Swiveling speed (r/min) 0.62 0.62 0.62 Raising speed (m/min) 0.4 0.4 0.4 Dead load (t) 70/125 70/125 70/125 Top boom of lifting beam ¿n1008 fasterner ¿n808 ¿n1008 fasterner ¿n808 ¿n1008 fasterner¿n808 Standard knot dimensions (mm) 1.9351.9352.8 1.9351.9352.5 1.9351.9352.5 Matching motor Materials of main limbof tower body 13516 13516 ¿n12514fasterner Q345 Parallel height of lifting beam 1370 1370 1370
Maker: kato /model: kr20h-3 /year:1989/ working hours :6, 200/
Tower crane High quality and lowest quotation
It has many working modes and wide applying range. It has working modes like being fixed with groundwork and being attached to wall, etc., which can be applied to different working objects. Hoisting height of separate type is 46m, attaching type is made by adding standard sections and attaching device under foundation of separate type, its hoisting height can reach 150m, and max. hoisting weight of special type can reach 200m.
The tower crane is a hydraulic tower crane with swing top, horizontal jib and mobile trolley. It has the hoisting moment of 760Kn.m, the maximum hoisting load of 6t and the maximum working radius of 50m.The hoisting height of anchoring tower crane is 40m and that of climbing tower crane is 140m.
The tower crane is a hydraulic tower crane with swing top, horizontal jib and mobile trolley. It has the hoisting moment of 400Kn.m,the maximum hoisting load of4t and the maximum working radius of 48m.The hoisting height of anchoring tower crane is 28m and that of climbing tower crane is 90m. The tower crane has excellent performance and is suitable for hoisting in short civil or industrial buildings or loading or unloading in ports or goods yards The products of Huaxia Group are your best choices of construction machines.
The maximum length of its jib can be 60m and also can be reassembled to 55m,50m,45m,40m, which can have a wide work range spite of barriers.The anchoring tower crane has the hoisting height of 46.2m.The tower crane use fluid drive system to increase or decrease mast height so as to make proper crane height for different building height.The climbing tower crane has the hoist height of 161m.At specific requirement and through special treatment ,the anchoring tower crane can have the hoisting height of 51.2m and the climbing one can have the hoisting of 200m.
Crawler crane Kobelco, cke2500, 250 ton capacity S/n : jd02-00200, m/year : dec. 2005, 2200 hrs Boom : 62m Hook : 150t, ball Excellent condition 250 ton
