HPT612-W is full sealed submersible level sensor. It is made by building in high stable and reliable piezo-resistive silicon pressure sensor and high accurate circuit board into the stainless steel housing. Integrated construction and standard signal provide the user easy and convenient application in the local working place. The special cable connects with housing, can be immerged into the media for a long time. HPT612-W level sensor has smart structure, high accuracy and good stability; it can be used for water or liquid measure and control of medicine, metallurgy, electricity, mine, city water supply and drainage and hydrology, etc. HPT612-W level transmitters is based on Zigbee wireless protocol and max transfer distance up to 400 meters, if add a wireless signal router, distance up to 800 meters. Characters: Accuracy: �±0.25%F.S. Wide working temperature scope Double supply by battery&DC power User-defined data transfer interval time With English level monitor PC software Highly-efficient lighting absorption and strong RFI & EMI resistance Remote signal transfer by Zigbee. 1.5 times range standard overload. 3 times range burst pressure CE approving Applications: well depth measurement and control water tank level measurement river level measurement and control wireless level monitor system Industrial course testing and control Building water supply systems Oil and Fuel Tank level measuring Automatic detection system Saving water to irrigate Liquid pressure and level measurement And so on
LED Light With Stainless Steel Cover The cover is made of high-quality Sus 304, which is of high intensity and fast-cooling quality. The head is made of 5mm-thick tempered glass, and there is a 12 mm silicon pad between to make the whole light water-proof. (IP 68)LED bulbs are imported famous brand (180 PCS), the electricity-light transforming efficiency is 6 times higher than conventional bulbs. LED lights are also with rich and accurate colors. The power is 24-V, which is very safe to use. LED Synchronous Colored Light LED Synchronous colored light can paint the music fountains with various colors without increasing the control cables. There is a set-in control chip in each light, which could change the color in a circle R-G-B-RG-RB-GB-RGB, and all lights for one project are ensured to have the same color at a certain time. Himalaya Professional Fountain LED Specially tailored for musical Fountains, Himalaya Professional Fountain LED can light fountain nozzles evenly with high efficiency. (the light can easily track and light water columns to 30-meter high). Equipped with 3-color chips in each Bulb and controlled by Himalaya simultaneous light control system, Himalaya Professional LED can change the color, jump, chase and fade automatically in accordance with music input. It is one of the most advanced light in this field.
UFO profile LED High Bay Lights combines unique UFO shape and cooling aluminum heat sink dissipation design. Metal bracket for surface mount and stainless steel hook for pendent mount option. Environment-friendly and no lead, no mercury. LED is easy to replace 100w-1000w metal halide high bay lights. High color rendering level 85 and waterproof IP65 rating perfect for retail stores, wholesale warehouses, grocery chains, malls, showrooms and plant etc. Wide world input voltage (100 -277 or 200-480V AC) LM80 certificate SMD LED with 140-150 LPW output High-duty die-casting aluminum housing Black powder-coating finish Precision-molded polycarbonate optics lenses Red/green/black trim ring for option High temperature resistant silicone rubber ring Beam angle 120 degrees Recommend 15-35 ft height UL approved meanwell driver Pre-wired with 1 SJTW cord fixed Hang-hook, chain install or surface mounted bracket for installation option 1-10V DC/Dali dimming available Microwave motion sensor Photocell available ETL/cETL certified DLC qualified CE and RoHS Directive-compliant certificate Application for warehouse, supermarket, office, plant, airport lighting 5-7 years warranty
Sell export hose rubber hydraulic hose wire spiral drilling and marine oil conveying rubber hose lpg propane hose welding hose jackhammer hose sand blasting hose inflatable rubber hose water suction hose steam rubber hose rubber air hose sheet rubber conveyor belt heavy duty fabric conveyor belt nylon conveyor belt polyester conveyor belt cotton conveyor belt heat resistant conveyor belt oil resistant conveyor belt flame resistant belt chemical resistant conveyor belt steel cord conveyor belt chevron conveyor belt one side rubber conveyor belt sidewall conveyor belt endless belt related manufacturing machinery auto parts rubber raw materials acrylic chlorinated rubber butadiene rubber butyl rubber chloroprene rubber ethylene propylene diene monomer rubber ethylene propylene rubber isoprene nitrile rubber isoprene rubber poly butadiene styrene butadiene rubber reclaimed rubber rubber accelerator rubber additives rubber antioxidants rubber latex silicone rubber styrene butadiene rubber synthetic rubber thermoplastic rubber, Exporters of halal meat, registered exporters with government of punjab, pakistan, sadiq & saddiqique enterprises We are the manufacturer rubber hose and conveyor belts, rubber raw materials. Rubber hose including hydraulic hose, air hose, welding hose, suction hose, drilling hose, delivery hose and twinline hose based on din, sae, rma, bs en standard. The size from 1/4” to 20”, the temperature can bear what you wanted for special usage with different material.There are ep/cc/nn conveyor belt from 8mpa to 24mpa base on din, rma, as 1332, sabs 1173/2000, is 1891, bs 490, jis k 6322 etc standard, the width from 300mm to more than 6000mm. Hose assembly is also available, - Export worthy
Product Introduction Application Polymerization silicon resin type release agent, and it is suitable for polyester and polyether type sole production. Advantage 1. Easy to use; 2. Safety and non-toxic; 3. Non-corrosion on mold; 4. Low adhesion for resin. Specification Item Index Appearance Milky white Specific gravity 1 Odor None Using method 1. Using appropriate solvent or detergent cleaned mold thoroughly, to remove the previous releasing agent and other pollutants, wiped with dry cloth. Then wiped with chlorinated solvents or petroleum ether and dry with air; 2. Using the traditional spraying equipment, distance die-face 10-50 cm / 4-20 "spraying; 3. Spray uniform film three times under normal temperature; 4. Coating a layer of uniform film again after perfusion demolding; 5. The mold releasing agent can be diluted. Notes 1. Should be stored in a dry ventilated place under 13â??-38. Sealed containers must be sealed to prevent evaporation, keep away from the fire; 2. Service time: one year Company Introduction We are a manufacturing for chemicals in weihai, china with more than 23 years full experience and skilled workers, professional sales team and R&D researchers. Our core competencies is good delivery time, better quality, and order will be consistency with the sample. The majority of customers get benefit from sell our items. The STRONG product is Metal Surface treatment, Chemical auxiliaries, and Antifreeze coolant. We supply to Australia, Indonesia, India, Philippines, Pakistan, Myanmar, Mongolia, Kenya, and Paraguay. Contact Ways Shelly ma Sales man Weihai Runking Chemical Industry Development Academy Address: No.89-2, Wenhua Zhong Road, Weihai, China T: 86 0631 5895891 | | M: 86- 15953864197 Website: www.whrunking.com Skype: shelly.ma_runking Email: shellyma@5eee.com WhatsApp(Wechat): 0086 15953864197
Product Description: Item: gasket set Engine:QSB OEM NO.:4955229/4955230 Application: commercial cars, excvators, heavy trucks, engineering trucks, all series engine model for Cummins, repairing, sealing MOQ: the total money of each order must not less than five thousand us dollars. Delivery time: 10-50 days after receiving your deposit. Payment terms: 30% deposit of the total money paid by T/T,the balance should be paid when you receiving the B/L duplicate. Products: upper and lower gasket kits/ compressor repair kits/ pump repair kits cylinder head gaskets/ valve cover gaskets/ rocker level housing gaskets/intake and exhaust manifold cover gasket/ gear housing gaskets/turbocharger gaskets/ oil cooler core gaskets/ oil pan pad gaskets oil seals/valve stem seals/front and rear crankshaft oil seal o rings/rubber parts main&rod bearings /Compressors Engine Model: 4BT3.9, 6BT5.9, 6CT8.3, 6L, L375, M11, L10, NT855, N14, NH220, K19, K38, K50, ISB, ISC, ISD, ISL, QSB, ISF Material: asbestos, nonasbestos, interface mp-15, interface n8092, interface c301, metal, tinplate, graphite, NBR, viton, foam rubber, cork rubber, silicone rubber etc. Usage: engines for commercial cars, excvators, heavy vehicles, engineering trucks, marine Sales Range: China, Russia, Singapore, Nigeria, South Africa, South America, Turkey, Iran, Brazil, Argentina et. Competitive Advantages: 1. High precision and OEM quality standard guaranteed2. Prompt delivery 3. Best-selling4. Customer's design and logo are welcome 5. Customized package 6. Competitive prices7. Small order acceptable8. OEM accepted 9. Strong productivity If you haven?t found the products you want, we can also produce according to the samples and drawings for you especially or purchase for you in China. Buying parts from us you can be sure that the save without losing quality. neutral or customized package with carton
Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline crystalline solid at room temperature. The broadly used term lime connotes calcium-containing inorganic materials, in which carbonates, oxides and hydroxides of calcium, silicon, magnesium, aluminium, and iron predominate, such as limestone. Calcium oxide is usually made by the thermal decomposition of materials such as limestone, that contain calcium carbonate (CaCO3; mineral calcite) in a lime kiln. This is accomplished by heating the material to above 825 °C (1,517 °F), a process called calcination or lime-burning, to liberate a molecule of carbon dioxide (CO2); leaving quicklime. The quicklime is not stable and, when cooled, will spontaneously react with CO2 from the air until, after enough time, it is completely converted back to calcium carbonate Uses quick lime Quicklime is relatively inexpensive. Both it and a chemical derivative (calcium hydroxide) are important commodity chemicals. Quicklime produces heat energy by the formation of the hydrate, calcium hydroxide, by the following equation:[3] CaO (s) + H2O (l) Ca (OH) 2 (aq) (ΔHr = −63.7 kJ/mol of CaO) As it hydrates, an exothermic reaction results and the solid puffs up. The hydrate can be reconverted to quicklime by removing the water by heating it to redness to reverse the hydration reaction. One litre of water combines with approximately 3.1 kilograms (6.8 lb) of quicklime to give calcium hydroxide plus 3.54 MJ of energy. This process can be used to provide a convenient portable source of heat, as for on-the-spot food warming in a self-heating can. When quicklime is heated to 2,400 °C (4,350 °F), it emits an intense glow. This form of illumination is known as a limelight, and was used broadly in theatrical productions prior to the invention of electric lighting. Calcium oxide is also a key ingredient for the process of making cement.
Tungsten carbide grinding jar, is also known as cemented carbide grinding jar, consists of wolfram carbide and cobalt which is famous for its super high hardness. Therefore, the tungsten carbide grinding jar, which is made of tungsten carbide material, is of good hardness and abrasion resistance.The powder which is used for planetary ball mill can be in good crushing and do not pollute samples, and can meet the requirements on the hardness, wear resistance and comminuted that the ordinary ball mill jar cannot do. Working principle: As the necessary accessory of the planetary ball mill, during planetary ball mill grinding the powder, grinding jar, which is fill with balls and samples, grinding the balls and materials with the high speed. By the way of friction, impact and shear, the walls of grinding jar will produce intense energy to achieve very good crushing effect. The grinding jar is the container which provides space for completing grinding the powder. Characteristics: Tungsten carbide is with high hardness, good wear resistance, strength and toughness, anti-high temperature and corrosion, especially it is with the great advantage of high hardness and good wear resistance. Tungsten carbide will not out of shape even if in the 500?, and is still with high hardness in 1000?. Performance evaluation: Application fields:medical treatment/food/electrics/material/machinery/chemical industry, etc. Application:iron, aluminum, cobalt, chromium, plumbum, tungsten, molybdenum, magnesium, copper, tin, alumina, zirconia, silicon, Carbon, etc Material: tungsten carbide Grade:yg8 Content:tungsten carbide 94% cobalt 5% other 1% Temperature:-100-400? Density:14. 6g/cm3 Compression modulus:56mpa Bending strength=2320n/cm2 Elasticity modulus:510.0gpa Microhardness:17800mpa Volume:0.1l / 0.25l / 0. 5l / 1l Grinding way:dry/wet grinding Structural form:vertical type Acid and alkali resistant:yes Low temperature resistant:yes High temperature resistant:yes Leak tightness:ip60
1 Capscrew & whasher 304 stainless steel 2 1 Handwheel Cast iron, astm a126 class b 3 Bolts & nuts (o-ring plate) 304 stainless steel 4 1 O-ring plate Cast iron, astm a126 class b 5 2 O-rings (o-ring plate) Rubber 6 1 Gasket (o-ring plate) Composition 7 1 Low torque bearing Delrin 8 1 Cover Cast iron, astm a126 class b 9 Bolts & nuts (cover) 304 stainless steel 10 1 Gasket (cover/body) Composition 11 1 Non-rising stem Low zinc bronze 12 1 Stem/gate nut Bronze 13 1 Body Cast iron, astm a126 class b 14 2 Wedge Bronze 15 2 Hook Cast iron, astm a126 class b 16 2 Gate/disc Cast iron, astm a126 class b 17 2 Gate/disc ring Bronze 18 2 Case/body ring Bronze 19 1 Operating nut Cast iron, astm a126 class b 20 1 Pipe plug Steel with teflon 21 4 Capscrew on 10" & 12" only Silicon bronze 22 2 Straps on 10" & 12" only Stainless steel
Product features: 1. High efficiency and energy-saving: imported integrated LED chip with high efficiency for light source, light efficiency reaching to 100-130lm/v, saving more than 60% energy in comparison to halogen lamp. 2. Highest explosion-proof level, IP66, the whole lamp has the supreme explosion-proof protection performance. 3. Diecasted hard aluminum alloy casing with pressure-casted formation, surfacing high voltage electrostatic powder coated, rust resistant and corrosion resistant. 4. Design of cavities for light source and electric makes it efficiently avoid the heat from adding together, and so it has good heat dissipation performance, lamp is more stable and reliable. 5.Transparent high boron silicon toughed glass, anti-impact, collision and corrosion resistant, resistant to rapid heat change. 6.With constant current & voltage control, and short-circuit & over voltage protection, driver can work even under fluctuated grid without noise or stroboflash. 7.Cavities for light source, electric parts and wiring terminals are separated from each other to ensure the system’s stability; The wiring cavity is designed to facilitate the users’ wiring. 8. Multi-mounting modes. Main parameters: Rated voltage: AC 220V Rated power: LED 50W (40/60W can be customized) Luminous flux: 50W 5000lm Casing material: High toughed aluminum alloy Transparent part material: Special toughed glass Waterproof level: IP66 Corrosion-proof level: WF2 Explosion-proof mark: Ex dIICT4 Gb/DIP Weight: 3.8Kg Mounting method: wall mounted, suspension mounted, ceiling mounted, flange mounted, banister mounted
General Characteristics: 1. It is a highly rich component in Potassium phosphite, which due to its delicate composition is easily absorbed by the leaves and root, and distributed systemically, by phloem and xylem. 2. Stimulates plants to express their full genetic potential, accompanying the overcoming of all kinds of stress 3. It is a natural stimulator defense system acquired by plants, which through biochemical reactions achieve the maximum expression of genetic potential in every situation: 1. - Improving agronomic variables of N° of leaves, photosynthetic performance, root density, cell wall thickening. 2- activating the phytoalexins production and hydrolytic enzymes. 3- by intervening directly in the metabolism of the pathogen ( the phosphite itself is a potent bactericidal and fungicidal). Usage: Early vegetative: added to any type of herbicide, insecticide and / or fungicide, with the aim of increase the production of lignin, increase the production of root hairs and photosynthetic capacity, reduce the inoculum source of disease, increase the SAP flow, which means the crop is more vigorous, better healing after insect attack, delay bacterial and fungal attack, increased tolerance to environmental stress and water Early reproductive state: As in vegetative, further enhancing the effect of the fungicide translocation, reinforcing the effect "destination", thus a better fruit set of flowers and fruits, less severe disease and higher than 1000 grain weight Phostron K - Can be applied alone or with any product - Can be used in any crop without restriction - Can be applied with a silicone adjuvant
Available materials with co2 laser cutting and engraving (yes:work well , no: some depend on the materials) Items Category Engraving figures Cutting Etching pictures Fabric Denim, leather, polyster, cotton, nylon, pongee, sude, jeans, satin, crduroy, Chiffon, tulle, fleece Yes Yes Yes Wood Plywood , bamboo , veneer , mdf, polymeric materials Yes Yes Yes Plastic Pp plastic , abs plastic , pvc pipe , polyester sheet , insulation layer Yes Yes Yes Organic Acrylic , rubber, resin , epoxy resin , silicone , plexiglass , pmma , perspex Yes Yes Yes Paper Packaging material, tin foil, card, cardboard, chipboard| Yes Yes Yes Composite Double color plate | organic board | Yes Yes Yes Stone Ceramic, tile, marble, granite, slate, gravestone, porcelain| Tombstone | ceramic plate Yes No Yes Other Nonmetal process material , coating materials , plating materials , Spraying materials Yes No Yes J6040 .Jpg A Accessories of mini laser engraver ♦ 1¡¡§¡éco2 laser engraving machine ♦ 1¡¡§¡éair pump(installed inside the machine) for air assist (for blowing off debris as the laser engrave or cut) ♦ 1¡¡§¡éair exhaust fan(installed inside the machine) with tube ducts ( for extracting gases from the work area) ♦ 1¡¡§¡éwater pump/ chiller ♦ 1¡¡§¡éusb cable (connecting pc and laser) ♦ 1¡¡§¡édvd (including software, user manual, guiding videos etc.) ♦ 1¡¡§¡élaser tube, ♦ 3¡¡§¡éreflecting mirrors ♦ 1¡¡§¡éfocusing len P Parts of mini laser engraver Cnc laser machinecnc laser machine parts S Samples of mini laser engraver 5 Before you make payment, contact us for detailed information please!
Icroprocessor control is Designed to optimize the charging cycles for any type of battery, single mains input Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output, Delta-star stray flux single-phase power transformer, tenvex copper windings with Double enamel insulation; class h; impregnated in autoclave with ecological epoxy Resins, with thermocouples for disconnection due to maximum temperature, singlephase Rectifier bridge with silicon diodes, natural cooling, with snubber protection, Mains input and d.C. Output polarized cables, modular installation on galvanized Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10, Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral 2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic Compatibility and ce marking, equalization charge timed, automatic start, automatic Disconnection of battery charger due to battery disconnection, smart charging system According to the discharge level of the battery, short check of functions and times, Option: custom-made colour and custom-made logo and silk-screen printing, final Acceptance test conforming to safety regulations, charging with decreasing current (wa characteristic): 9÷11 h charging time, charging with decreasing current (wo - Wa characteristic): 7÷8 h charging time, complete with mains and battery cables; Assembly of plugs and battery connectors on request.
Ptek tc3 three phase is designed to recharge medium - large capacity traction and Start lead-acid batteries, developed using our forty-year experience in the field of , three-phase rectifier Bridge with silicon diodes, natural cooling, with snubber protection, mains input and D.C. Output polarized cables, modular installation on galvanized steel base, sheet Steel case with modular panels so as to assure maximum accessibility in case of Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new Lexan plate with charging data very easy to understand, equalized recall push Button, on - off push button, option to adjust the charging time from 90 to 210 Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization Charge timed, led signaling charging phases or result, short check of functions and Times, option to program the equalized charge automatically, lab-tested electronic Circuit conforming to the directive on electromagnetic compatibility and ce marking, Automatic disconnection of battery charger due to battery disconnection, option: Custom-made color, logo and silk-screen printing, option: assembly of plugs and Battery connectors on request. Charge at decreasing current with intervention of the final charge At 2.40 v/cell, final charge with timed control 9h / 11h, fixed Charging time (equalization charge excluded), equalization Charge (week-end charge) to be recalled. It will start after 55’ From charge end, duration of equalized charging phase: each Hour 5’ (repeated for 48 hours), calculation to determine the size Of suitable battery charge: 16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).
The battery chargers of the cemb-easy 3000 Series are designed to recharge medium capacity Traction and start lead-acid batteries and are O the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. Technical characteristics easy 3000: • 230v - 50hz one phase supply, (with possibility to request voltages different from The standard ones), adjustable to ± 5% or ± 10% • electronic control provided with final charge timer • on-off switch • rectifier bridge with silicon diodes, natural cooling, with snubber protection and Gemov • tropicalized stray-flux transformer : tenvex copper windings with double enamel Insulation; class h; impregnated in autoclave with ecological epoxy resins. • 12/10 sheet steel case provided with electrical bondings and ergonomic handle • epoxy powder coating, oven-baked • standard colour: ral2002 red • new lexan plate with charging data very easy to understand • lab-tested electronic circuit conforming to the directive on electomagnetic Compatibility and ce marking. • option: custom-made colour • custom-made logo and silk-screen printing • complete with mains and battery cables; assembly of plugs and battery connectors On request. • charge at decreasing current with intervention of the final charge At 2.40 v/cell • final charge with timed control 9h / 11h • fixed charging time (equalization charge excluded) • equalization charge (week-end charge) to be recalled. It will start after 55’ from Charge end • duration of equalized charging phase: each hour 5’ (repeated for 48 hours) • calculation to determine the size of suitable battery charge: 16a for every 100 Ah of the battery (e.G. 500 ah battery: 16ax5 = 80a)
Core: wound by high quality cold grain silicon, annealed by advanced vacuum annealing furnaces to improve electronic data, any dimension from customer are available Wire: copper and aluminum are available weld aluminum enamel wire well to save your cost 15 to 35%, based on our know-how technology Thermal protector: cutoff and switch are both available Applications: Electronic meter and apparatus Cable tv and digital network Electronic control Medical equipment New electric power supply Decorative illumination system Monitoring and control equipment Installation: horizontal (non-conventional-type base plate), sunk, side type and bridge Label info: certificate logo, basic electronic data, manufacturer's information also can be printed according to customer's request bar code is available based on customer's request Capacity: 5va to 5kva Phase: single Input voltage: ac power with voltages of various countries Output voltage: ac or customized Frequency: 50 to 60hz Power factor: 0.9 to 0.98 Efficiency: 75 to 98% Voltage regulation: 12 to 3% Output no-load loss: 0.5 to 10.0w Temperature-rise: ¡¨¹85¡ãc Insulation class: b: 130¡ãc e: 120¡ãc Testing items: no-load test (no-load current, voltage and loss) load test (load voltage, temperature-rise) inductive voltage test dc resistance test safety test
Heat pipe vacuum tube technical parameter Model: hp58/1800-20 l / 0.43 mm Outer tank material/thickness: sgcd/ 0.5mm Angle of collector: 25-85 ¡ã Rated pressure: 0.7mpa Heat pipe material: copper; 14/24 mm condenser diameter, 1800 mm pipe length. Insulation material and thinness: polyurethane foam, 50 mm Seal: silicon rubber polymer Manifold material: aluminum alloy Tank capacity: 100, 150, 180, 200, 250, 300 lite Advantages: 1. Adopts red copper channel, with great performance of heat exchange 2. Utilize copper heat pipes containing special medium liquid with low boiling point. 3. Work well in all climate, can be function well even in ambient temperature 4. Each heat pipe tube works independent and efficiently and easy to change if necessary. 5. No water flows inside the vacuum tube, no risk of freezing. Working principle: 1. Solar absorption: solar radiation is absorbed by the evacuated vacuum tubes and converted into heat. 2. Solar heat transfer: heat pipes conduct the heat from within the solar tube up to header. 3. Solar energy storage: water or water mix is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oc / 9-18of. Throughout the day, the water in the storage tank is gradually heated. Packing :standard export carton with foam or wooden box Delivery: 10-15 working days We offer products which are designed with your specific requirement in mind. Package: standard cartoon box Min order: 2 pieces
Mingda glitar3 3d printer Welcome to mingda technology(shenzhen) co., ltd 2.Multi language 3.All steel framework 4.High speed 250mm/s 5.High accuracy 0.04-0.2m 6.Large printing size 300*200*360mm 7.Linux/windows/osx, stl/obj Product parameters: 1.2 new arm x2 mainboard, 100 mhz arm processor 2.A new digital current management technology precision control 3.5 axis, 1/32 micro stepping motor control 4.Lcd multilingual support chinese support, knob button. (interface upgrade services regularly issue ui ) 5.Speed up new xyz structure under the condition of twenty percent accuracy 6.Software control atmosphere more light, can upgrade wifi (optional) 7.The fuselage is made of 2 mm steel plate, laser seal welding, plate overall forming, to ensure the smooth processing 8.The security silicone hot bed technology 9.High standard of the lacquer bake process 10.Biggest sd card 32gb Specification: 1.Software package:mingda v1.0 2.Compatibility:linux, windows and osx 3.Support file type:stl, obj 4.Input voltage: 220 v (please note the grounding) 5.Input power supply: 5a 6.Connection: usb, support sd card printing directly 7.Material: new modified pla, support the common pla and abs 8.Filament diameter:3 mm 9.Continuously working 48 hours 10.Warranty 1 year
Aerated concrete density is usually 600-800kg/m3(according to the market in production), same as 1/3 of clay brick and 1/5 of common concrete, so use the light brick can reduce the weight of the building, and also reduce the beam of roof and pillar press, also you can see, it can save the material and costs, Keep temperature. It has many porous, the delivery hearting coefficient is 0.90.22W/MK, so it is the best materials in the world now, also many kinds of raw materials, have lowest waster materials, coal ash, sand waste mine materials stone dust and other silicon materials. Raw material: Sand, fly ash, lime, gypsum, aluminum, cement and other aggregate. 3.The autoclaved aerated concrete block production line process: (1).aerated concrete/aerated blocks raw material preparation and storage: we will use jaw crusher, ball mill, bin and bucket elevator. (2).Aerated concrete/aerated blocks Ingredients, mixing, pouring: needs mixer, casting machine, screw conveyor, belt conveyor, batching system control , the aac mould and so on. (3).aerated block static stop maintenance. (4).aerated block cutting section. aac cutting machine/aerial tumbling cutting units is important. (5).aerated block coding ,autoclaving and finished product. 4. Sand formulation Parameter Name Parameter Value sand 62% lime 18-22% cement 10-12% gypsum 3% Aluminum powder 0.0007-0.0008% 5. Fly ash formulation( alternatively) Parameter Name Parameter Value fly ash 68% lime 18% cement 6-8% gypsum 2-3% Aluminum powder 0.0007-0.0008% 1. Main huge equipment in nude; 2. Breakable and fragile packed in wood crate or composite board crate; 3. Package according to client¡¡¥s demand.
Specification Product name Metal frame, high density sponge, ce motors, quality silicone, multi-function control box Movement 1.Mouth open close 2.Neck up down 3.Head left right 4.Tail sway 5.Breath 6.Sound Sound Vivid roaring sound Color Color is optional Technics 2-8 sets of movement programs, 2-8 sound effect, program adjustable Control Infrared sensor / remote control / coin box Power 110/220v 50/60hz Plug Euro plug / british standard / saa / c-ul / or depends on request Packing Knock-down packing or assembled packing Package Bubble plastics / wooden case / air case, depends on cutomers' choice Warranty 1.5 year Certificate Ce (no.1895091211) Lead time 10~60 days, depends on order quantity Remark 1.Product length is measured by vertebra. Hight is for reference, it will be different for different modelling. 2.Other size is also available. From 1~50 m long. 3.Movement and function can be customized. 4.We can provide all kinds of shipment , such as fob, cif, ddu, ddp etc. 5.We can accept any kinds of payment terms, such as tt, l/c, d/a. D/p, etc. Other service 1.We provide a comprehensive design service for product, exhibition layout, theme park design, festival decoration. 2.Our robotics can be customized to meet clients' requests, including choice of chinese, japanese or other motors. Choice of different kind of plugs.Etc. 3.We provide central control system design and modification according to the exhibition conditions. 4.Flexible and efficient transportation. Like fob, cif, ddu, ddp etc.
