6N Polycrystalline Silicon
Granule 1-4mm 99.99%
Products information Silicone oil ln-201 Description Other name:polydimethylsiloxane fluid Mf:(ch3)3sio[(ch3)2sio]n-si(ch3)3 Cas no:63148-62-9 Ln-201 is a series of products with viscosity of 100~300, 000cst.Under strict production process, the quality of the ln-201 is able to reach the stand of food, cosmetics and pharmaceutical usage. It is tested which established that silicone oil is essentially non-toxic and non-irritating. Not harmful to textiles, garments and human body. Application 1.Used in skin care, bath gel, shampoo and other cosmetics. 2.Used in additives and agent in rubber, sealant, plastic, latex, etc. 3.Used as deforming agent, lubricant, release agent in pharmaceutical, food, chemical, paint and other industries. 4.Used as mold release agent 5.Used as softener, lubricants for sewing line, and other textile. Storage: Keep away from fire and direct sunlight, it has 12 months shelf life in closed containers, products beyond the shelf life can be usable.
Mould Release Agent (SS EM -) is Silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and Release properties are advantageous. Antifoam – Defoamer (SS AF -) is Antifoam Emulsion designed to provide optimum antifoam performance for general purpose and special pH conditions, combined with good dilution stability and good foam knock down performance. Methyl Hydrogen Emulsion (SS ER -) is reactive methyl hydrogen emulsion especially designed for treating variety of substrates & fibers where water repellent or hydrophobic properties required. Textile Softners ( SS SOF -) Amino Silicone Fluids Emulsions specially designed to provide excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle. Shine – Polish Agent ( SS SP -) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. Poly Urethane release Agent (SS-PU) Release Agent has been specially formulated as a semi permanent release agent in a wide range of applications, including:• Polyurethane Release: particularly polyester type, polyurethane shoe sole, Microcellular automotive parts and furniture (integral skin), Automotive parts: bumpers, crash pads, dashboards.
ARG 100 is a hydrolytically stable Silicone polyether surfactant, which can be used in wide range of applications in Paints, Agriculture, PU Foams, Textile, Petroleum Refineries, Detergents, Automotive and Household cleaning products, due to its excellent surface property (surface tension below 22 dynes/cm). SS ARG 166 is used as emulsifier in Textiles and other applications. SS ARG 110 is a Super Wetting and Spreading Agent, which have a low molecular weight nonionic silicone surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals SS ARG 210 All purpose cost effective Spray Adjuvant , which on mixing with insecticides, fungicides, herbicides and other agriculture chemicals increases their penetration, spread and efficiency.
1. 1:1 addition type, good adhesive strength and self-healing 2. High elongation, excellent flexibility for mechanical stress relieving 3. Low oil penetration after cured, good anti-poisoning property 4. Good dielectric in high temperature for high voltage protection 5. Excellent aging resistance and weatherability 6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector. PROPERTY STANDARD/UNITS VALUE of SI2709 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Colorless Liquid Colorless Liquid Viscosity 7;C, cps 800~1000 800~1000 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100:100 Viscosity of mixture 7;C, cps 800~1000 Operation time 7;C, min 60 Cure condition RTV or HEAT 7;C /6 hour;67;C /30min Cured appearance ---- Colorless transparent gel Needle penetration 1/mm 75 Dielectric strength KV/mm 25 Volume resistance DC500V, ohm-cm 1.0¨¢1015 Loss factor 1 MHz88;0.001 Dielectric constant 1 MHz 2.8 Application temperature7;C -60~260 Part Aa10 KG/Bucket, Part Ba10 KG/ Bucket.
Chemical name : Polydimethylsiloxane CAS No. : 63148-62-9 EINECE : 618-493-1 Apperance : colorless and transparent Physical and chemical features : a.Smoothness & softness & hydrophobicity & good chemical stability & insulation property b.High and low temperature resistance & high flash point. c.Low freezing point (it can be chronically used in the temperature from -50? to +200 ?). d.Small viscosity-temperature coefficicent & big compression ratio & low surface tension. -
5N-6N
Fesi75-aSi 74.0~80.0Mn 0.4Ca 0.3Cr 0.1P 0.035S 0.02 Package: 1mt jumbo bag Dimensions: 0-10mm, 10-100mm
Si purity: 99.7% min, 99.9%min or 99.99%min Packing: 25kgs/bag Size:pls contact us for more details. 25kgs/woven bag.
Ferro silic: 72%min / 75%min Al: 2%max C: 0.2%max S: 0.02%max P: 0.04%max Size: 10-60mm 90%min Packing in 1 mt bag and then put in containers
1. Used in aluminum: an additive to aluminum alloys, silicon is used to increase the fluidity and tenacity of Aluminum and its alloys, which enjoy good castability and weldability accordingly. 2. Used in organic chemicals: silicon metal is used in manufacturing a number of sorts of silicones, resins, and lubricants. 3. Used in electronic parts: silicon metal is used in producing monocrystalline and polycrystalline silicon of high purity for electronic parts, such as semi conductors, etc. In plastic woven bags of about 10KG,250 KG and 1MT net each.
Si 75%min, al 2.0%max, c 0.2%max, s 0.03%max, p 0.04%max Size: 10-50mm, Packing: in 1 mt big bag
ferro silicon Ferrosilicon Lumps Si:75%/72%min Al:2.0%max C:0.2%max S:0.02%max P:0.04%max. Ferrosilicon Fines Si:75%/72% Al:2.0%max C:0.2%max S:0.02%max P:0.04%max Size:90%min or at buyer's option In 1mt PP woven bag . In 1mt pp woven bag Size:1-3mm,3-10mm,10-50mm,50-100mm 90%min or at buyer's option In 1mt PP woven bag .
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each.
siliocn metal is mainly used in the producing of alloys based on aluminium. Silicon metal 553, 441, 331, 3305, 3303, 2503, 2502, 2202.
Description Fesi (low al & ti) 1) Si: 75%min, Al: 0.1%max, C: 0.05%max, Ti: 0.05%max, P: 0.02%max, S: 0.01%max 2) Si: 75%min, Al: 0.1%max, C: 0.01%max, Ti: 0.05%max, P: 0.025%max, S: 0.015%max 3) Si: 75%min, Al: 0.5%max, C: 0.02%max, P: 0.03%max, S: 0.02%max
(1) Silicon metal #553 Si:98.5%min. Fe:0.5%max. Al:0.5%max. Ca:0.3%max. Size:10-100mm,90%min. (2) Silicon metal #441 Si:99.0%min. Fe:0.4%max. Al:0.4%max. Ca:0.1%max. Size:10-100mm,90%min. (3) Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. 1MT Container Bag
Ferro silicon Si 70pct, 72pct and 75pct min. Al 1.0pct, 1.5pct and 2.0pct max. C 0.1pct 0.2pct max. P 0.04pct max. S 0.02pct max. Size 10-50mm, 10-100mm, 50-100mm 90pct min. Packing: in 1 mt plastic woven bag net each.
Ferro silicon Guaranteed specs si:65-75%C:0.2% max ,al 2%max, s:0.02%max, p:0.04%max Size:10-50mm or 10-100 90%min Delivery date: Within 30 days shipment after receiving TT paymentPacking: In 1mt PVC woven bag in 20' containers
