Thread Button Bit 1)thread:R22,R25,R28,R32,R35,R38,T38,T45,T51,ST58,T60 2)diameter:42-127mm Retrac Button Bit 1)thread:R22,R25,R28,R32,R35,R38,T38,T45,T51,ST58,T60 2)diameter:42-127mm Thread cross bit 1)thread:R22,R25,R28,R32 2)diameter:33-64mm Shank adaptors 1)thread:R28,R32,R38,R45,T45,T51,ST58,ST68,HL64 case
We are a professional manufacture of rock drilling tools, mining tools, dth drilling tools. Construction tools and excavating coal pick cutter tools. (e.G: rock drilling tools, top hammer equipment, dth button bits, dth hammers bits, down the hole drilling tools, drifting and tunneling , cross bits, button bits, integral drill steels, integral drill rods. Couplings, crossover adapters, crossover couplings, shank adapters, mining bits, mining tools, mining rods, threaded bits, tapered bits, rods and tubes, tapered rods, drill rods, drill bits, cross-type bits, guide button bit, reaming equipment, hex.Drifter rod, shank end rod, drifter rod, speed rod, dome reaming bit, pilot rod, extension rod, guide rod, guide tube, rod adapter, etc.)
As a modern supporting rock drilling tool, the shank adapter is produced with the development of drilling technology and rock drilling conditions. In terms of rock drilling technology, when developing from shallow hole drilling to medium and deep hole drilling, due to the limitation of the working section, to obtain deeper rock holes, it is necessary to use coupling sleeves on the same axis of the drill rod. Connect multiple drill rods for drilling. The shank rod used in this rock drilling process is the prototype of the development of the shank adapter. With the development of rock drilling equipment, the matching parts of the shank rod as a matching drill tool and the rock drill are more complicated, and the technical requirements for connection and cooperation are becoming more and more strict. To adapt to the changes, shank adapters of various structures have been produced. Shank adapter classification Common shank adapters are mainly divided into three categories: flange-type shank adapters, lug-type shank adapters, and spline adapters. The cross-section of the flange-type shank adapter is hexagonal, 22mm or 25mm for the inscribed circle diameter and 108mm or 159mm for length. It is manufactured by the forging process and is used for light rock drills. The lug-type shank adapter is used for inner-rotating medium-sized guide-type rock drills, and the diameter of the drill rod is 25mm or 32mm. The spline adapter is often used for heavy-duty guide-type external rotating rock drills with large torque, and the diameter of the drill rod is more than 38mm. It is often manufactured by a mechanical process. Product Parameters Shank adapter for pneumatic guide rock drill: It is suitable for small rock drills and can be operated manually. Shank adapter for Atlas Copco rock drill: It is suitable for the Atlas Copco rock drill, one of the most commonly used rock drills. Shank adapter for Sandvik Tamrock rock drill: It is suitable for the Sandvik Tamrock rock drill, one of the most commonly used rock drills. Thread size: R28, R32, R35, R38, T38, T45, T51. For more product specifications, Please email us or leave us a message. advantage 1. We have professional technical, procuring, marketing, order management, and after-sale service teams, which can provide customers with pre-sale technical solution consultation and product selection suggestions, in-sale order management, and after-sale on-site technical guidance and other services. 2. We focus on the field of geotechnical anchorage, always with high standards to do supply chain management, strict requirements to check product quality, and heavy experience to create the whole process of service. 3. We are committed to providing systematic geotechnical anchorage solutions for customers at home and abroad, creating a valuable service experience.
Quick Details Model Number: R32 R35 T38 T45 T51 GT60 ST58 ST68 Product Detail Shank Adapter: R25,R28,R32,R35,R38 and T38 shank adapters to suit most drifters. Coupling: R25,R28,R32,R35,R38,T38 thread. Rod: - R25, R28,R32,R35,R38,T38 thread,Male to male, Male to female. - 1800mm-6440mm length. Bit Adapter: ,R38,T38,R32 thread. Drill Bit: - R25, R28,R32,R35 thread. - 32mm-64mm, button bit diameter. Reaming tools/Hole openers: -R32,R35 thread,Pilot adapter,Crown bit,Dome bit and Reaming bit. -64mm-127mm bit diameter. Shank Adapter: R32,T38,T45,T51,ST58 and ST68 shank adapters to suit most drifters. Coupling: R32,T35,T38,T45 and T51 thread. Rod & Tube: - R32,T35,T38,T45,T51, ST58 and ST68 thread. - 915mm-1830mm length. Drill Bit: - R32,T38,T45,T51,ST58 and ST68 thread. - 64mm-152mm, button bit diameter. Reaming Tools: - R32,T38,T45,T51,ST58 and ST68 thread,Reaming bit. - 89mm-254mm, bit diameter. Shank: H22 x 108mm,H22 x 159mm and H25 x 108mm shanks to suit most drifters. Rod: -H22, 7°,11° and 12° tapered rods, 610mm- 8000mm length. -H22, Integral rods,series 12, 800mm-8000mm length Drill Bit: -H22, H25, 7°,11° and 12° tapered bits - 32mm-40mm, button bit diameter. Shank: T38,T45,T51,EL60,GT60 shanks to suit most drifters. Coupling: T38,T45,T51,EL60,GT60 thread. Rod & Tube: - T38,T45,T51,EL60,GT60 thread. - 3.0m-7.3m length. Bit Adapter: T38,T45,T51,EL60,GT60 thread. Drill Bit: - T38,T45,T51,EL60,GT60 thread. - 64mm-152mm, button bit
Button bits
1.DTH Hammer: 3-12 2.Bit Size: 76mm-605mm 4.Down the hole hammers and drill bits are designed together to work in perfect unison, ADVANTAGE: 1.Deliver maximum energy to drilling bit, fast drilling speed and low air consumption due to the special inner structure of DTH hammer designed according to newest rock drilling theory. 2.Smooth performance and long service life of DTH hammer due to high quality alloy steel materials and advanced processing technology adapted. 3.Low problem rate and easy to maintenance due to simple, reliable and easy assemble and disassemble inner structure of hammer. 4.Easy to depart bit from hammer due to multihead thread connecting chuck and cylinder of hammer. 5.Interchangeable with DTH bit and drill pipe. Low pressure and high pressure hammers are available in our company.
Shandong Ruilong Drilling Technology Co.,Ltd. (hereinafter referred as YK drill) is a professional manufacturer of mining equipment and rock drilling tools. As a young and developing enterprise, YK drill is located in Linqing City of Shandong Province. Main distribution scope of YK drill includes full range of rock drilling tools for top-hammer open mine drilling, under-ground long-hole drilling, top-hammer tunnel drilling and rock bolt anchoring. The full range rock drilling tools include hydraulic drilling tools, DTH drilling tools, tapered equipment and drilling tools for under-ground long-hole drill rigs; the hydraulic drilling tools include drill rods, drill bits, couplings, shank adapters, hydraulic drifters and thereof spare parts. DTH drilling tools include DTH hammers, DTH bits and DTH drill pipes of high pressure, middle pressure and low pressure. The tapered equipment include high-quality tapered button bits, tapered chisel bits, tapered cross bits, tapered rods and integral rods. The distribution network of RL drill includes more than 20 Provinces, autonomous regions and municipalities in domestic marker, and more than 20 countries like Australia, America, Canada, Finland, Germany, Japan, South Africa, Chile and so on around the world. YK drill looks forward to cooperating sincerely with clients all over the world.
Product Despcription Dimensions D Flushing hole(mm) Buttons(mm) Angle Class Part no. mm in Front No Size Gauge No Size Front No Size Gauge No Size 45 1 3/4 1*5.5 2*5.5 2*9 5*11 30�° H 3045R3207 48 1 7/8 2*6 1*5 2*9 5*11 30�° H 3048R3207 51 2 2*6 1*5.5 2*10 5*11 30�° H 3051R3207 43 1 11/16 2*5 2*5 2*8 6*9 30�° S 3043R3208 45 1 3/4 2*5 2*5 2*9 6*10 30�° S 3045R3208 48 1 7/8 2*5.5 2*5 2*9 6*10 30�° S 3045R3208 43 1 11/16 3*4 2*5 3*8 6*10 30�° M 3043R3209 45 1 3/4 3*5 1*5 3*8 6*10 30�° M 3045R3209 48 1 7/8 3*5 1*5 3*9 6*10 30�° M 3048R3209 54 2 1/8 3*6 1*5.5 3*10 6*11 35�° M 3054R3209 45 1 3/4 3*5 1*5 3*8 6*10 30�° M 3045R32F09 48 1 7/8 3*5 1*5 3*9 6*10 30�° M 3048R32F09 51 2 3*5.5 1*5.5 3*9 6*10 35�° M 3051R32F09 54 2 1/8 3*6 1*5.5 3*10 6*11 35�° M 3054R32F09 57 2 1/4 3*6 1*6 3*10 6*11 35�° M 3057R32F09 Remarks: Hemispherical-66(Usually for very hard rocks) Ballistic-65(Ususally for medium hard rocks) Semiballistic-64(Usually for medium hard rocks) Conical-67(Usually for soft rocks)
1.Part No.3076T3812 2.Bit Diameter: 76mm 3.Button bits: 12 buttons 4.Length of drill rod: 900mm-5490mm (MM and MF) 5.Button bit design: Flat face, drop center, normal and retrac body. 6.Tungsten carbide (Buttons): Spherical, ballistic and conical. 7.Applications: Bench, production. We have different designs for various rock formations, and a longer service life to decrease use costs for users.
32mm Button Bit Types of tungsten carbide rock drill bits for hard formations drilling
32mm Button Bit Types of tungsten carbide rock drill bits for hard formations drilling
Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy. According to different drilling application, we have different design to meet customers with good quality and good price. No matter what kinds of rock-soft rock, loose-medium rock, hard rock and any other special formations, just tell us what you need and leave others at our disposal, we will handle the following, and our special tailored service is waiting for you upon your demand. R32-45mm, r32-51, r32-64, r32-76, T38-64mm, t38-76mm, t38-89, t38-102mm, T45-76mm, t45-89mm, t45-102mm, T51-89mm, t51-102mm, t51-127 etc. (3)package: in wooden case or in carton or as client's requirement. (4)productivity: 10000pcs/ month Package: in wooden case or in carton or as client's
Are widely used in dimensional stone quarrying Industry and underground mining Industry. It includes thread button bit and drifter rod, extension rod, shank adaptor, coupler and etc. -
Forging / Superior Alloy Steel / Production Type: COP, DHD, MISSION, SD, QL, WOOKE / Hammer Size: 2", 3", 4", 5", 6", 8", 10", 12" / External Dia.: 70mm, 80mm, 99mm, 126mm, 144mm, 182mm, 220mm, 270mm / Apply to: Surface and underground mining, Tunneling, Quarries, Dam construction, Construction, Geological exploration, Water Well / Certification:ISO9001:2008 / Feature: Optimized structure and Heat treatment reduces consumable and wear, but increases penetration speed 10%-30% than other similar hammers, and longer working life / emma(at )wooke(. )com / Perfectly compatible with the famous brands such as Atlas Copco, Ingersoll-Rand, Sandvik and other well-known brands
Length:380mm-460mm Diameter:31.7mm-48mm Thread:r, t Flushing hole:8.0mm-16mm. Our different levels of products choose the high-qualitied medium carbon alloy steel and medium carbon steel, use advanced processing technology to make the best products.
Rock drilling tools.
Dth hammer and bit
Are widely used in dimensional stone quarrying Industry and underground mining Industry. It includes thread button bit and drifter rod, extension rod, shank adaptor and etc.
Are widely used in dimensional stone quarrying Industry and underground mining Industry. It includes thread button bit and drifter rod, extension rod, shank adaptor and etc.
Are widely used in dimensional stone quarrying Industry and underground mining Industry. It includes thread button bit and drifter rod, extension rod, shank adaptor and etc.
