Material: natural amber Gem shape: round Gem color: golden Diameter: 6mm Origin: baltic states 16" stand natural baltic amber round beads (about 10g) Although amber's use in adornment is probably as old as mankind itself, in recent times it has had a limited market.Millions of people learned from the film that amber, which is fossilised pine tree resin, is ancient and valuable, like an antique from history. The two main sources of amber on the market today are the baltic states and the dominican republic. Amber from the former is older, and thus preferred on the market, but that obtained from the latter is more likely to have insect inclusions. Amber prices can range from $20 to $40, 000 or more. 16"stand = 10g = usd35.5
Monocrystaline Solar panels produced by Himin have certificate of TUV and IEC from 10w-185w, solar panels of higher wattage available according to your requirement Features of high power module: High power module using 125mm square monocrystaline silicon solar cell with 14.1% module conversion efficency. Photovltaic module with bypass diode minimizes the power drope caused by shade.textured cell surface to reduce the reflection of sunlight and BSF(Back Surface Field)structure to improve cell conversion efficency: 16.9%. Using low iron tempered glass,EVA resin and an aluminium frame for extended outdoor use. DC 24V systerm and high voltage output for grid-connected systerm. Output terminal: Lead wire with waterproof connect .
Molding Silicon Rubber Application This product is mainly applicable to make the silicon mould for culture relic duplication, architectural decoration, lighting ornaments, candles statues, model design, product exploitation, etc. Molding Silicon Rubber Description Molding Silicone rubber and silicon are generally named as two-part room temperature sulfurated silicone rubber, which features as exceptional fluidity and good operability. When mixed with 2%-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion. It mainly applicable to make the silicone mould for cultural relic duplication, architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc. 25kg/drum, 200kg/drum
Formula :c3n6n6 Applications :mainly used for manufacturing melaminoformal dehyde resin, which is water, heat and arc resistant and bright can also be used in decorative laminates, aminoplastics, adhesive agents, coatings and used as paper reinforcing agent, textile auxiliaries, cement water-reducing agent and leather retaining agent Appearance&odor: white crystal Dangerous goods class: not regulated Purity :99.80% min. Ph value :7.5 - 7.9 Ash content: 0.03 max. Coloruity (pt-co) degree: less than 30 Kaolin turbidity degree :less than 20 Package: 25kg, 250kg, 500kg or 1000kg pp bag with pe film liner or upon requests Payment: l/c at sight or t/t or d/p at sight 25kg, 250kg, 500kg or 1000kg pp bag with pe film liner or upon requests
Product Name: JWS-Hot Water Thermometers Model Number: JWS-11 / JWS-12 Supply Ability: 5,000 pcs/month Plastic shell submarine thermometer, straight form (JWS-11). Plastic shell submarine thermometer, 90íp angle form (JWS-12). White V-shaped aluminum scale panel. Gray thermoplastic resin shuck. Glass face (window) to exclude dirt and dust. Triangular red reading liquid filled tube. Lower part: Fixed connected with thread, made in copper, length: 43mm - 100 mm. Connect pipe thread: 3/4", 1/2". Dual scale extent of survey: -40C - 200C / -40ípF - 400ípF. Packing: 1 pc/paper box(depending on practical size) Conveyance: Packed in corrugated carton Size: 51 x 40 x 28cm
2715 fiberglass sleeving coated with polyvinyl c 2715 fiberglass sleeving coated with polyvinyl chloride resin is the e-glass fiber braided sleeving coated with polyvinyl chloride resin.It is produced with the process of thermoplasticization. Characters It is class a insulating material.This product has good qualities of dielectric, chemical resistance, excellent softness and elasticity. Application It is suitable for wiring insulation and machine protection in machine portrction in electrical machines, electric appliances, instruments, radios and other electric devices. Specification Type 2715-=¬ Average breakdown voltage 7kv Type 2715-== Average breakdown voltage 4kv Type 2715-== Average breakdown voltage 2.5kv Inner diameter(mm) 1, 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24, 25, 27, 30
Using special shortwave infrared quartz glass as the heat source which the light-wave offers powerful penetrability. Lamps are rotatable through three-dimensional direction, and they can changed any position and angle that make sure to work convenient for caríªs painting. The equipment can be used to dry automobile resin putty, two-component paint and water base coating. It has widely scope of application. Lamp cover adopts stainless steel with shining mirror-like surface, reflective effect good, thermal gather homogeneously. Short drying time to ensure high proficiency and high quality of painting surface. Bracket is made of metal alloy, strong, beautiful and durable. The casters, it can move freely, trouble free and convenient. Wheels with brake are good use of position fixed when the equipments worked.
Synonym: sodium fluoroaluminate Molecular formula: na3alf6 Molecular weight: 209.94 1> properties: it is crystalline white powder. Slightly soluble in water, density 2.95-3, melting point 1000oc, easily absorbing water and become damp, decomposed by strong acids like sulfuric acid and hydrochloride, then producing hydrofluoric acid and relevant aluminum salt and sodium salt. 2> uses: mainly used in flux of electrolytic aluminum, pesticide, flux of ceramic colors, anti-rubbing filling agent of resin and rubber, electrolytic liquid for production of iron alloy rimmed steel and furnish of emery wheel. 3> packing: 25/1000kg plastic woven bags with shrink film,or according to customers requirements. 4> specifications: gb4291-1999 Ingredientsuperfirst gradesecond grade F%535353 Na% 323232 Al131313 H2o%n0.40.50.8 Sio2n0.250.360.4 Fe2o3%n0.050.080.10 So4%n0.71.201.30 P2o5%n0.020.030.03 Ignite on 550ocn2.53.003.00 Cao%n0.100.150.20 Packing:25kg/bag
Insualtor We are a leader in the design and manufacture of epoxy components for the electrical power equipment industry. We do business with the philosophy that our most important product is customer satisfaction. We are now the supplier of italian vei(xiamen), areva(xiamen), etc. Specializing in manufacture of epoxy resin insulators, we have lots of kinds of insulators from 145kv to 7.2kv, such as spouts, bushings, post insulators, capacitive insulators, voltage indictors, and such special advanced components as applied on c-gis, sis, embedded poles, sf6 airproof system, etc., featured as compact design, high reliability, electric field equilibrium, for outdoor and indoor application. We has built up extensive expertise in material control, casting technology , testing ways and application data in apg ( automatic pressure gelation ) field. Also we welcome the oem business, and would like to tailor your special need all through mould design to casting. 6
Antiblock masterbatch Product name: Antifabrillating/antiblock masterbatch. Product code: Ctc 80 r . Packing: 25 kg hdpe/pp woven sack. Carrier resin: Polyolefin blend. Additive: Calcium carbonate. Melt flow index: 40¦2 g/10 min(astm d- 1238 at 1900 c & 10 kg load) Application polymers: pp/hdpe Heat resistance: 3000 c at 5 min dwell time. During processing Non toxicity: The masterbatch is non toxic for use in plastics Health & safety: the masterbatch can be used safely in plastics, following a good mnufacturing practice. It is a non hazardous, machine friendly product. 25 kg hdpe/pp wooven sacks
Specification: Purity,% : min.99 Ash content, %wt: max.0.05 Fe.ppm:max.1 As.pm:max.3 Heavy metal(as Pb):max.10 Colour,APHA: max.30 (5% in ethanol) Water content,% wt:max.0.50 Applications: Main purpose: Solubility: dissolve in water, cold water-soluble, ether, benzene, soluble in water, soluble in ethanol,to the system of synthetic resin Packing: Packed in PP bag with inner lining PE sacks each. Each sack weighted 25.0kg (net) of product. Storage and transportation: Stored in dry, clean and well ventilated storehouses. Do not leave it unsheltered. During transportation, the product should be loaded in clean trucks or vessel with canvas coverings.
Corn plastic clamshells, hinged clamshell, natureworks, nature works, ingeo, natureworks pla, nature works llc Corn plastic clamshells - pla plastic food containers These hinged pla clamshells are made from 100% corn. With the same look and feel as clear plastic clamshells, our pla clamshells will completely compost under commercial composting conditions in just 45-60 days. Made from corn, an annually renewable resource, natureworks pla is a plastic-like resin that is fully biodegradable. Natureworks has a heat tolerance of up to 110 degrees (f). Why put your food in containers made from petroleum-based plastic. Your food comes from nature and now so does its packaging!
Chlorinated Paraffin-52 1)Technical Index Appearance: White or Light yellow transparent sticky liquid Chlorine Content(%)50~54 Specific GravityD420 í¦1.25 Acid Value(mgkoH/g)í_0.08 Hot Decomposition Temperatureíµí¦120 2).Application ú¿1ú¬This product is of assistant flame retardant plasticizer of PVC products, with good volatility and electric performance, making more brightness and tensile strength to the products. ú¿2ú¬Additive to plastic and painting products against aging. ú¿3ú¬ Applied widely for PVC resin, chloridized rubber, and compound paint, adhesive and ink products with stable chemical performance, against water, firing or corrosion. polyethylene plastic drum or iron drum,250kg/rum.
Thulium composite stabilizer Functions & properties: Excellent stabilization and dispersion, equally lubricating inside and outside, bring excellent processing property and stabilization in light and heat, materials color is hard to change as well. Xxc-1a can effect as compatibility. Xxc-1ah had capacity of color up earlier and widely processing range. Xxc-1as xxc-1hf have a fast plasticization, so the melting liquid will be plasticized more even, the processing property and physical capacity will be better, the products will get high welding angle and smooth surface. Referenced usage: Put this product resin and other additive into high speed compounding machine till the temperature reach 120-130 Package: Krafe paper sack with braided bag as liner 250.2kg/sack net Storage: Store in dry place, prevent from sulfide Metal oxidate content%>=38 Package: Krafe paper sack with braided bag as liner 250.2kg/sack net
Dicyandiamide Commodity: Dicyandiamide CAS Number: 461-58-5 Chemical structure: Property: White crystal powder, density is 1.40g/cm3(at 25 ). Melting point is 207-209 , it is soluble in water and alcohol, almost insoluble in ethylether and benzene, stable when dry, non-flammable. Packing and storage: packed in plastic woven bags with PE inner liner of 25kgs. Storage: met each, stored in cool, dry and ventilated warehouse Prevent from moisture. Application: Mainly used as a raw material for the manufacture of guan amine, gibuanide, various resins, trimetric cyan amide, fire retardant etc. Used as filler in leatherette and as additive in adhesive agent. Specification data: See the table below. Assay:99.61% Moisture:0.24% Ash:0.04% Melting point:210 íµ Calcium Content:182ppm 25kgnet each
Our special product, Fireproof ACP with Pink Core has got the certificate, which testify our panels can use in all high buildings in Russia. Our products have passed ISO9001:2000,ISO14001,ISO14021,PICC,ASTM,and UKAS. Our new products,100% fire-resistant ACP has been passed the test successfully.It will be come into market soon. 1. The specification of ACP: Surface: Polyester resin, and PVD(KYNAR500 from USA) Standard: 1, 220mm x 2, 440mm. Width: 1, 000mm, 1, 220mm, 1, 250mm, 1, 270mm, 1, 550mm, 1, 550mm for your choice. Length: According to your requests. Thickness: 2mm, 3mm, 4mm, 5mm, 6mm. Aluminum thickness: 0.12mm, 0.15mm, 0.18mm, 0.21mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.45mm, 0.50mm.
Defrost thermostat The ksd1004 defrosting thermostats are mainly used for the control of the freezing equipment, And at the same time may be also applicable for the temperature control in the aviation, Auto and medical industries. They are widely applied by the world outstanding designers. Applicable scope & features Ksd1004 serial 3/4 disc(19mm) bi-metallic defrosting temperature controller Is used for temperature-control in refrigerators and air-conditioner, Also applicable for automatic temperature control in dehumidifier, refrigerator Heating-defrosting and system temperature limit safety arrangement .Its Structure features application of resin to seal the electric parts Completely, allowing to be installed in a narrow space, boasting easy Installation, moisture-proofness and wet-proofness, etc. 45*35*20
Plastic bottle making machine ib28 The machine is one-step blow bottle equipment. It is used to make 5-500 ml plastic bottles. The machine output reached maximal 40, 000pcs bottles per day. Suitable for most thermoplastic resins such as pe, pp, ps and so on .Its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on. Cavity number of one mould and volume of bottle. (for reference) Volume*cavity quantity: 8ml*6 piece, 15ml*6 piece, 20ml*6 piece, 40ml*5 piece, 60ml*4 piece, 80ml*3 piece, 100ml*3 piece Omachine weight: 4 t Verall size l* w* h: 3400*1150*2300 mm Packing: sea-worthy strong wooden cases
The machine is one-step blow bottle machines, its products are widely used in medicine packing, the cosmetic packing, making up chemical industry, gifts & toys and so on. It adapts to produce bottles for 5ml~500ml, suitable for most thermoplastic resins such as pe, pp, ps, pc and so on. The machine produces maximal 40, 000 piece bottles one day. Cavity number of one mould and volume of bottle. (for reference). Volumef-cavity quantity: 8mlf-6 piece, 15mlf-6 piece, 20mlf-6 piece, 40mlf-5 piece, 60mlf-4 piece, 80mlf-3 piece, 100mlf-3 piece. Overall size l* w* h: 3400*1150*2300mm;
2-pyrrolidone Product: 2- pyrrolidone Cas no: 616-45-5 Chemical formular: c4h7no Molecular weight: 85.10 Specification: 99.7% min. Characteristics: clear or colorless liquid with boiling point 245c, flashing point 129c.It can be dissolved in many kinds f solutions such as aldehyde, aether etc. Application: 2-pyrrolidone is a colorless high boiling point polar solvent and is also an organic synthetic intermediate. As to this kind of solvents we can use it to produce synthetic resin, pesticide, polyvalent alcohol, printing inks and iodine, and as the raw materials of production of polyvinyl pyrrolidone, poiyamide-4 fiber and piracetam, etc. Package: 200kg/plastic drum or steel drum 200kg/plastic drum or steel drum
