Resin Suppliers and Manufacturers
Resins Crylate copolymer 2264 (for inks) Acrylate copolymer lv (for masonry coatings) Polyester powder 157 Alkyd resin k-43 (water dispersion type) Modifed ester mer 110 (for road marking) Polyester resin (tgic & hybrid)
Specifications : Colour : pale yellow (Grade WW) Softening point : 75 deg.C min Ash content : 0.02% max Acid value MgKOH/g : 166 min Unsaponifiable materials : 5% max Alcohol Insoluble materials : 0.03% max Packing: in new galvanised iron sheet drums N.WT : 225 kgs / drum G.WT : 229 kgs / drum 100 drums to be put in one 20 FCL
Hydrocarbon resin Hydrocarbon 85 Hydrocarbon resin Liquid hyrdocarbon ap 25 C5 hydrocarbon resins C9 hydrocarbon resins Hydrogenated resins Pure monomer resins
Product Description: Iso Cyanate modified single pack Polyurethane Alkyd having excellent gloss,hardness, mar resistance, stain and water resistance.Recomended for wood lacquer also in pigmented air drying top coat Origin: INDIA Key Specifications: "Solids content: 50 ± 2% Color - Gardner Scale 4 max. Acid number: 5 max.(mg KOH/g) Viscosity: 45-75 seconds in FC4 at 30±1°C(45% solid in MTO) Surface Dry 45 mins max Hard Dry 2 3 hours " Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 180 KG BARREL
Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Key Specifications/Special Features "Solid content: 70± 2% Color Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g solids) Viscosity: 10 15 Poise at 25C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG Barrel
Product Description: Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Origin: INDIA Key Specifications: "Solid content: 70± 2% Color Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g solids) Viscosity: 10 15 Poise at 25°C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : It is a pale color hard ketone-aldehyde resin with high alcohol solubility. It is compatible with most binders and soluble in nearly all conventional solvents in field of application. Its high melting point provides improved heat resistance and better blocking resistance. Its high degree of polarity allows for improved adhesion, pigment wetting and gloss. Its faster solvent release property makes it unique.adhesion, pigment wetting and gloss. Its faster solvent release property makes it unique. Price of product ( USD price or FOB price) $1588/MT Product origin INDIA Key Specifications/Special Features Appearance : Bright granules Color - Gardner Scale (50% solution in Ethanol) : 2 max. Acid Value: 1 max.(mg KOH/g) Viscosity @30±1°C B4 Cup (50% solution in Ethanol) : 16 â?? 20 seconds Softening Point(B&R) : 105 - 115 °C Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 25 KG BAG
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : 1456 Product origin : India Key Specifications/Special Features : Solids content: 70± 2% Color - Gardner Scale: 7 max(50% solution) Acid number: 15 max.(mg KOH/g) Viscosity(at 40%in MTO) : 70 - 90 seconds in FC4 at 30±1°C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
Product Description ; A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1456/MT Product origin : INDIA Key Specifications/Special Features ; Solids content: 70� 2% Color - Gardner Scale: 7 max(50% solution) Acid number: 15 max.(mg Viscosity(at 40%in MTO) : 70 - 90 seconds in FC4 at 30±1°C Minimum Order Size/ Packgaing details: 1 FCL (20MT)/ 190 KG BARREL
Indonesia Origin Product Specifications:- Appearance - Scrapped / Un-Scrapped Color - Yellow / Brown / Black Size - More than 3 inch Up Impurities - Less than 5 % I can provide the product immediately by shifting from our Indonesia Unit.
Identification Chemical substance: short oil alkyd resin short coconut Specifications Solids content: 70%(� 1%) Color - gardner scale : 2 max (50% solution) Acid number: 10 max.(mg koh/g - solids) Viscosity: 10 max.(mg koh/g - solids) 10-15 poise at 50%(25) Main characteristics oil type: c 12 fatty acid Solvent: mixed xylene Standard applications - nc systems - coating for metal - force air drying - oven drying - primer - top coat
Bitmain antminer s9 13.5 th's bitcoin/sha-256 miner - ready to ship ! Ready to ship from california - march batch !! will ship fedex or ups. Includes: Antminer s9 Does not include: Power cable Ethernet cable 1600 power supply (apw3++ power supply or compatible) - available to purchase Condition: Brand new - unopened - latest batch 1. Power consumption figures will vary with your psu's efficiency, the ambient operating temperature and the accuracy of the power meter. 2. Product will be shipped from dubai . 3. You will need an atx psu with at least 10 six-pin pcie connectors. There are 3 six-pin pcie connectors on each hashing board and all three need to be connected to the psu for the hashing board to operate. Do not connect more than one psu to the same hashing board. Bitmain recommends the apw3++ to power the t9+. 4. Separate power supply to control board: there is one additional six-pin pcie connector on the io board which must be connected to the psu to get power. Be sure to power on the miner only after all the 10 pcie connectors are connected to a power supply. Notes: Read item setup instructions carefully before operation Manufacturer warranty details: A 180 day limited warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on bitmain's website. Overclocking the miner will void the warranty immediately. The warranty only applies to the original purchaser who purchased the machine directly from bitmain. Once the miner is resold warranty coverage becomes the responsibility of the re-seller. -
Impurity < 8% volatile oil > 6% C10H20O2>18% Ethiopian Natural Gum Grade 1 A Special Size: 6MM And Above Hand Picked
Product Description: "Synthetic Iron Oxide Red 130 Pigment, also known as Hydrated Ferric Oxide, is a red odourless powder and insoluble in water. It is manufactured by the precipitation process using leach liquor - a waste from Ilmenite production. Advantages: 1). Bright-colored exquisite powder. 2). Good weatherability;Lightfastness, heat-resistant and alkali resistant; 3). Strong tinting power, excellent covering ability and fine dispersion. 4). We can supply iron oxide with different color, specifications and packing. Mainly Application: 1).Constructions:asphalt and concrete,color floor tile,color facing bricks terrazzo,roofing tiles 2).Paint and coating : water-based exterior and interior wall coating,oil paint primer and finish paints and anticorrosion paint 3).Plastic and rubber: thermosetting plastic and thermoplastic and rubber track 4).Others:paper,leather,ceramics,cosmetic and medicine " Origin: INDIA Key Specifications: "Fe2O3(%) : 94 Min. 99 Max. SiO2+Al2O3 : 0.6 Max. Loss on heat@1000oC, 1/2h % : 0.6 Max. Moisture content % : 0.3 Max. Oil absorption (g/100g) : approx 20 Max. Particle shape : spherical Tamped apparent density [g/cm3] : 0.9 Min. 1.1 Max. Density [g/cm3] : approx 5.0 Max." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 25 KG BAG
Product Description: Short Oil DCO Alkyd Resin Origin: INDIA Key Specifications: "Solids content: 70± 2% Color - Gardner Scale 6 max. (50% Solution) Acid number: 20 max.(mg KOH/g) Viscosity: 140-160 seconds at 30±1°C in B4 Cup 50% in Xylene" Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1441/MT Product origin : INDIA Key Specifications/Special Features : Solids content: 40� 2% Color - Gardner Scale: 4 max. Acid number: 12 max.(mg KOH/g) Viscosity(at 33% in MTO) : 45-65 seconds in FC4 at 30 C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
Product Description : It is compatible with low melting grades of Ketonic resin.Maleic, Rosin modified Phenolic Resin, Sprit soluble Phenolic Resin It is compatible with plasticizers like D.B.P, D.O.P, and low melting grade of polyethylene, paraffin and castor oil based waxes. Price of product ( USD price or FOB price) : $ 1588/MT Product origin : INDIA Key Specifications/Special Features : Appearance: Clear (Visual observation) Colour(Gardner 50% in Xylene) 4 max Solids content: 70� 2% Acid number: 20 max.(mg KOH/g - solids) Viscosity: 100 -140 seconds at 30 C At (50% in Xylene) B4 Cup Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 200 KG Barrel
Product Description : It is a biobased long oil alkyd resin. It has excellent exterior durability, good through drying, high covering power, high gloss, poor absorption to porous substrate & U.V. resistance. It is used in non-yellowing, air-drying, brush applications, exterior coatings, gloss coatings, interior coatings, varnishes, conventional white/pastel enamels & overprint varnishes. Price of product ( USD price or FOB price) : $ 1537/MT Product origin : INDIA Key Specifications/Special Features : Solids content: 60� 2% Color - Gardner Scale: 4 max.(50% solution in MTO) Acid number: 14 max.(mg KOH/g ) Viscosity(50% in MTO): 100-120 seconds in FC4 at 30�1�C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG BARREL
Product Description : Short�Oil�Alkyd�Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Price of product ( USD price or FOB price) : $ 1338/MT Product origin INDIA Key Specifications/Special Features Solids content: 70� 2% Color Gardner Scale 4 max(50% solution in Xylene) Acid number: 20 max.(mg KOH/g - solids) Viscosity: 140 -160 seconds at 30�1�C in B4 Cup 50%in Xylene Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG Barrel
Product Description : GlowPoly 140 is a Medium low viscosity Reactive Polyamide Curing Agent suitable for Epoxy Resin to be used in various applications. Price of product ( USD price or FOB price) $ 2647/MT Price of product ( USD price or FOB price) INDIA Key Specifications/Special Features : Appearance : Clear Amber to Brownish Liquid Color (CGS) :10 Max Amine Value (Mg KOH/gm) : 280-320 Mixing Ratio with Epoxy Resin (EEW 190) : 65 phr Viscosity @ 40�C by BF : 450-550 P Equivalent weight, approx. : 103 AHEW Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 190 KG BARREL
