Protects against Phase Loss, Phase Reversal & Phase Asymmetry Can be configured for 3 Phase 4 Wire or 1 Phase system Selectable Over Voltage / Under Voltage Trip level Selectable Time Delay LED Indications for Power and Fault conditions Voltage Sensing principle 1 C/O or 2 C/O Configuration Voltage Monitoring Series SM 500 83 Cat. No. Parameters 240 VAC (1 Phase & 3 Phase, 4 Wire) Frequency Power Consumption (Max.) 4 VA 50/60 Hz Supply Voltage ( ) 105% to 125% (of ) 55% to 95% (of ) LED Indication Operating Temperature Storage Temperature Separate indications for Power ON, UV and OV O O -15 C To + 55 C O O -25 C To + 70 C Utilization Category AC - 15 DC - 13 Rated Voltage (Ue): 120/240 V, Rated Current (Ie): 3.0/1.5 A Rated Voltage (Ue): 24/125/250 V, Rated Current (Ie): 2.0/0.22/0.1 A Trip Settings Under Voltage Phase Loss Phase Sequence Phase Asymmetry Over Voltage 0.5 to 15 s (Selectable) 5 s 0.5 to 15 s (Selectable) 5 s 5 s 0.5 s to 15 min (Selectable) Time Delay ON Delay Trip Time (OFF Delay) Output Contact Rating Electrical Life Mechanical Life Relay Output 5A @ 250 VAC / 28 VDC (Resistive) 5 1X10 6 3X10 1 C/O Enclosure Dimension (W x H x D) (in mm) Weight (unpacked) Approx. Mounting Certification Flame Retardant UL 94-V0 36 X 90 X 60 120 g Base / DIN rail Degree of Protection IP 20 for Terminals, IP 40 for Enclosure ORDERING INFORMATION Note: 1) Voltage setting is with respect to Neutral. Voltage Setting Accuracy: �± 5 % of Full Scale; Time Setting Accuracy: �± 10 % of Full Scale RoHS Compliant Humidity (Non Condensing) 95% (Rh) EMI / EMC Harmonic Current Emissions IEC 61000-3-2 Ed. 3.2 (2009-04) Class A ESD IEC 61000-4-2 Ed. 2.0 (2008-12) Level II Radiated Susceptibility IEC 61000-4-3 Ed. 3.2 (2010-04) Level III Electrical Fast Transients IEC 61000-4-4 Ed. 3.0 (2012-04) Level IV Surges IEC 61000-4-5 Ed. 2.0 (2005-11) Level IV Conducted Susceptibility IEC 61000-4-6 Ed. 3.0 (2008-10) Level III Voltage Dips & Interruptions (AC) IEC 61000-4-11 Ed. 2.0 (2004-03) All 7 Levels Conducted Emission CISPR 14-1 Ed. 5.2 (2011-11) Class A Radiated Emission CISPR 14-1 Ed. 5.2 (2011-11) Class A Environmental Cold Heat IEC 60068-2-1 Ed. 6.0 (2007-03) Dry Heat IEC 60068-2-2 Ed. 5.0 (2007-07) Vibration IEC 60068-2-6 Ed. 7.0 (2007-12) 5g Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 40g, 6ms Non-Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 30g, 15ms Cat. No. Description MD71BH 240 VAC, UV / OV with Selectable ON Delay (0.5 to 15 sec), 1 C/O MD71BF 240 VAC, UV / OV with Selectable OFF Delay (0.5 to 15 sec), 1 C/O MD71B9 240 VAC, UV / OV with Selectable ON Delay (0.5 s to 15 min), 1 C/O
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Safety Relays Euchner: We supply a complete range of the manufacturerâ??s catalog, including the following items: Euchner 84142 Euchner STP3A-2131A024M Euchner 91493 Euchner 100464 Euchner 84135 Euchner 106619 Euchner TZ1LE024MVAB Euchner 84129 Euchner 85613 Euchner 91748 Euchner 105782 Euchner 109408 Euchner 16849 Euchner 84285 Euchner 98942 Euchner SN02D12-502-MC1688 Euchner KCB4E4E4E4E0000DV0W Euchner 71840 Euchner 79265 Euchner 79827 Euchner 84903 Euchner 98941 Euchner 99272 Euchner 100465 Euchner 104302 Euchner 109401 Euchner 78485 Euchner CET-A-BWK-50X Euchner TP3-2131A024M Euchner TP3-4131A024M Euchner TP1-528A024M Euchner 59226 Euchner 70828 Euchner 82922 Euchner 82928 Euchner 83966 Euchner 84154 Euchner 85676 Euchner 88204 Euchner 95396 Euchner 95738 Euchner 97436 Euchner 110906 Euchner 111434 Euchner 111436 Euchner 111748 Euchner 114972 Euchner 121062 Euchner 121856 Euchner 82934 Euchner NM12RBA-M Euchner STP3A-2131A024MC2369 Our company is also pleased to offer products of other brands: Bei Sensors IBH Softec Schmersal BALLUFF Pepperl+Fuchs Bernstein Di-Soric Elobau Univer Eltra Aventics FESTO Camozzi Euchner END-Armaturen TAMAGAWA SENECA Airtac Murrelektronik Azbil Yamatake FRANKE-Filter Endress+Hauser IFM Ipf Electronic Kieback & Peter MD Micro Detectors Bihl Wiedemann ANDERSON-NEGELE KITAGAWA Georg Schlegel Metal Work Kipp Allen-Bradley Netter Vibration Kuebler / K�¼bler RAFI LINDY 4B Braime SOUTHCO ELGO Electronic FAG RECO Pilz AIRTEC Pneumatic COMITRONIC-BTI L�¼tze Hydac Barksdale Keyence AirCom Pneumatic Garlock Mac Valves MAHLE (Filtration Group) Riegler Baumer Elreha Sick Siko FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world. Our mission is to provide fair prices, reducing the cost of production for our customers. A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms. Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site. You are welcome to check the full catalog on our website."
condition:used warranty:3 months Good quality with long life span WHY you choose us: Our company has many products in stock,which are immediately available.If you purchase one more parts from us,we can make a discount to you.
condition:new warranty: 1 year Good quality with long life span WHY you choose us: Our company has many products in stock,which are immediately available.If you purchase one more parts from us,we can make a discount to you.
1. Current tripping setting i!£g & display 2. Tripping time setting t!£g & display 3. Prealarm set-point setting al. & display 4. Function button 5. Setting & function selective button 6. Function setting button 7. Auxiliary supply presence 8. Prealarm display 9. Tripping display 10. Tripping test display 11. Reseting display 12. Tripping range:0.025~250a. 13. Tripping time: 0.02~500 second.
Features 1.Intelligent and digital led timer 2.1~4 channels, programmable and arbitrary combination and arbitrary output 3.Memory storage (10years) / mechanical life 4.Wide timing range (1millsecond~9999days) 5.Power supply (220v ac 50/60hz) 6.Capable of maintain timing in power-off state 7.100 groups of programme/time periods Additional jump function, the number of cycle is settable
Supply 80-230vac, 50/60hz 1-3phase And pass through 1.5-48vdc. Power consumption: 20-30ma Outputs 12 x isolated & separated Switched pass through outputs Rated at 9a each output ch. Maximum total load 100a total load of all channels Control io 3 x advanced rs485 s-bus Serial port links (both train & Screw link types) Upgrade io 1 x mini usb port (to connect to Special programming board) User controls • front panel override switches, Includes on/off/auto override Switch for each channel • led status indicator/channel • diagnostic led+ broadcast Programming • manual ch. Pairing programming Each channel to a button On wall panels (e.G. Ddp, 6b) • advanced software configuration & programming Compliance Ce mark low voltage Ce mark emc Internal protection • over load protection • protecting delay 0-60min • startup delay 0-25 sec. • bus rv. Polarity protection • bus short circuit protection Preset and scenes 12x12 built in scenes, & 12x2 Sequence modes & logics. Installation • 35mm din-rail mount ready • wall mount ready (8p) Sbus dc supply 24vdc with flexible tolerance Between 12-32vdc. Flexible Ability to add power supply as To be needed any where Supply terminals 12 each is good for 2 x 2.5mm2 Or 1 x 4mm2 max conductor size Output terminals 12 each is good for 2 x 2.5mm2 Or 1 x 4mm2 max conductor size Operating environment 0o to 45oc ambient temperature 10% to 93% rh Dimensions & weight W 91mm x l 145mm x h 75mm Packed weight 0.7kg
EOCR-SS 2 integral Current Transformers Electronic Shear-pin Functions Independently Adjustable Starting Trip Delay (D-Time) & Operating Time (O-TIME) Features: Compact Design Multiple Protection Functions Wide Current Adjustment Range (10:1) Ammeter Function Trip Indication LED High Accuracy Manual Instantaneous Reset Electrical Remote Reset Test Function Ambient Insensitive Low Energy Consumption Fail-safe Operation (No Volt Release) Protection: Protective Item operating (trip) Time Over-current O-Time Phase Loss O-Time Locked Rotor O-Time+D-Time .
XLogic SuperRelay is a compact and expandable CPU replacing mini PLCs, multiple timers, relays and counters. The xLogic SuperRelay perfectly fits in the space between timing relays and low-end PLCs. Each CPU incorporates not only a real-time clock and calendar, but also provides support for optional expansion I/O modules to enhance control and monitoring applications. The xLogic SuperRelay is the ideal solution for relay / PLC replacement, or simple control applications as building and parking lot lighting, access control, watering systems, pump control, ventilation systems, home automation and a wide field of applications demanding low cost to be a primary design issue. CE Approved. SMS Modules. Ethernet Modules. Expansion Modules. Standard & Economy Models. Free of Charge Configuration Software. XLogicSoft allows the user easy programming and configuration of each module directly from the user PC or Laptop. With guaranteed "free for life" software updates you will always have access to the latest software enhancements. Download the software and evaluate at ease via our website. Click here to start your download! Free of Charge. East & quick function block programming. Free upgrading to future software versions. Online Monitoring / Offline Simulation mode ETHERNET? No problem, the xLogic Super- Relay is Ethernet friendly. With The use of the ELC-E module Ethernet connectivity can be Added instantly. Need more connectivity? Also not a problem, using the widely accepted MODBUS protocol the xLogic "speaks your language' and easily connected to a wide range of devices. SMS GSM MODULE Incorporating the ELC-SMS -D-R module into your system allows the user full remote monitoring as well as remote control of the application via SMS (Short Message Service) on any GSM phone or PDA. Worldwide availability, low operating Cost, easy installation and integration In combination with high reliability makes SMS remote control and monitoring a desirable option in hard to reach, distant or hazardous environments. EXPAND to cover big needs Connect up to 31 additional "expansion "modules (depending on the exact model used) via CANBUS and expand your system to fit the exact needs of your application.
Solid state relay Ac control ac Dc control dc Dc control ac Voltage-controlled regulator Resistance regulator
Solid state relays(ssr) manufactured by the comus group of companies are sold around the world. The sign, with no moving parts, means that solid state relays have an almost unlimited life expectancy compared with electromechanical relays. With no mechanical parts there is no contact bounce, no sparks and no mechanical wear making solid state relays the natural choice in working environments where these features are important. 14"x9"x12" 10"x10"x6" 4"x2 12"x 1 3/4"
This unit sense current for over current or earth fault protections, 1kg, height 105mm base 102 * 51mm
New SA - Series "Solid State Relay" can provide additional feature to traditional SSR. It equipped with 1) Thermal protector to prevent overheat. 2) Load failure LED indication to monitor the load condition. General Specifications : 1) Input : 3 ~ 32Vdc / 90 ~ 280Vac 2) Output Voltage : 90 ~ 280Vac / 90 ~ 440Vac / 90 ~ 660Vac 3) Output switching current : 10A ~ 125A 4) Switching Principle : Zero crossing / Instant turn on 5) Protection : Snubber filter, Over voltage protect, Over temperature protection 6) Input Indication : LED indication 7) Output Indication : LED load failure indication
Rated voltage:12v Pins:6 The pins and fixator made of cooper. Packing by buyers needing
Solid state relay Input Ac 3~32,Ac220,Dc 3~32v Output Ac 200~270 v Load 10 A, 16A, 25A, 40A 12 pcs,120 pcs
Thermistor protection relay Used for giving fool proof protection against overheating alongwith PTC thermistor Uses the signal of ptc thermistors and switches off the equipment to be protected when dangerous temperature is attained Available with large variety of input supply voltages for the convinience of the user The relay is din rail mounting type Weight is approximately 200 gms Dimensions (h x w x d): 77 x 30 x 115 mm
Pt14-0 Pyp-1 Ptp-1-3 Ptp-1 Ptp-10 Ptp-12 Pyp-18 Mk2p-i-220vac Mk2p-i-12vdc Mk2p-i-24vdc Mk2p-i-48vdc Mk2p-i-110vdc Mk2p-s-220vac Mk2p-s-12vdc Mk2p-s-24vdc Mk2p-s-48vdc Mk2p-s-110vdc Mk3p-i-220vac Mk3p-i-12vdc Mk3p-i-24vdc Mk3p-i-48vdc Mk3p-i-110vdc Mk2p-i Mk2p-s Mk3p-5-i Mk3p-5-s Pl08 Ple08-0 Pl08-q Pl11 Ple11-0 Pl11-q G8h-1a7t-12vdc G8h-1a7t-24vdc G8h-1a7t-r-5vdc G8h-1a7t-r-12vdc G8h-1a7t-r-24vdc G8h-1c7t-5vdc G8h-1c7t-12vdc G8h-1c7t-24vdc G8h-1c7t-r-5vdc G8h-1c7t-r-12vdc G8h-1c7t-r-24vdc G8h-1a7p-5vdc G8h-1a7p-12vdc G8h-1a7p-24vdc G8h-1a7p-r-5vdc G8h-1a7p-r-12vdc G8h-1a7p-r-24vdc G8h-1c7p-5vdc G8h-1c7p-12vdc G8h-1c7p-24vdc G8h-1c7p-r-5vdc G8h-1c7p-r-12vdc G8h-1c7p-r-24vdc G8h-1a4p-5vdc G8h-1a4p-12vdc G8h-1a4p-24vdc G8h-1a4p-r-5vdc G8h-1a4p-r-12vdc G8h-1a4p-r-24vdc G8h-1c4p-5vdc G8h-1c4p-12vdc G8h-1c4p-24vdc G8h-1c4p-r-5vdc G8h-1c4p-r-12vdc G8h-1c4p-r-24vdc G8hl-1a2t-r-12vdc G8hl-1a4t-r-12vdc G8hl-1a4p-12vdc G8hn-1a2t-r-12vdc G8hn-1a2t-h62-r-12vdc G8hn-1c2t-r-12vdc G8hn-1a2t-rj-12vdc G8hn-1a2t-rj-24vdc G8hn-1a2t-dj-12vdc G8hn-1a2t-dj-24vdc G8hn-1c2t-rj-12vdc G8hn-1c2t-rj-24vdc G8hn-1c2t-dj-12vdc G8hn-1c2t-dj-24vdc G8hn-1a2t-rh-12vdc G8hn-1a2t-dh-12vdc G8hn-1c2t-dh-12vdc G8hn-1c2t-rh-12vdc G8hn-1a4t-rj-12vdc G8hn-1a4t-rj-24vdc G8hn-1a4t-dj-12vdc G8hn-1a4t-dj-24vdc G8hn-1c4t-rj-12vdc G8hn-1c4t-rj-24vdc G8hn-1c4t-dj-12vdc G8hn-1c4t-dj-24vdc G8hn-1a4t-rh-12vdc G8hn-1adh-12vdc B3w-1000 B3w-110
product description Relays are widely used in railway signal technology, called signal relays, which are important components in railway signal technology. It plays an important role no matter as the core component of the relay signal system or as the interface component of the electronic or computer signal system. The reliability of the relay action directly affects the reliability and safety of the signal system. Product Usage JZXC-480F lightning protection rectifier relay is used as AC track and AC accident relay in signal circuit. Product function It is a commonly used electrical appliance in automatic control systems. It is used to connect and disconnect circuits, to issue control commands and reflect the status of equipment to form automatic control and remote control circuits. Applicable environment a) Ambient temperature: -40â??~+60â??; b) Relative humidity: not more than 90% (temperature +25�°C); c) Air pressure: not less than 70kPa (equivalent to an altitude below 3000m); d) Vibration: the vibration frequency is not more than 15Hz, and the amplitude is not more than 0.45mm; e) Working position: horizontal; f) There should be no harmful gas causing explosion hazard around, and good dust-proof measures should be taken. Mechanical properties Number of contact groups: 4QH; 2Q Identification pin number: 13, 55; Contact gap: not less than 1.3mm; Pallet gap: not less than 0.35mm; Contact pressure: the dynamic contact point is not less than 250mN; the dynamic disconnection point is not less than 150mN; Contact uniformity error: not more than 0.20mm.
Product Introduction JPXC-1000 biased pole relay is an important component in interlocking equipment and the main equipment to ensure the safe operation of the system. The signal relay can control the switching of the turnout, lock and unlock the way, and control the opening and closing of the signal machine. Relays are widely used in railway signal technology, called signal relays, which are important components in railway signal technology. It plays an important role no matter as the core component of the relay signal system or as the interface component of the electronic or computer signal system. The reliability of the relay action directly affects the reliability and safety of the signal system. Product Usage The JPXC-1000 biased pole relay is designed to identify the polarity of the current in the signal circuit. In the signal circuit, it is used in the turnout indication circuit and the single-multiplex semi-automatic blocking circuit. Features 1. The relay adds a pole-biased magnet to the magnetic circuit, so that the armature is biased to the drop position by the permanent magnetic force. The pull-up of the armature is related to the polarity of the current in the coil. When the current through the coil is in the specified direction, the armature is pulled up, and when the direction of the current is opposite, the armature remains stationary. It only has a stable state, that is, after the armature is sucked up by electromagnetic force, it will fall when the power is cut off, and it will always be in a falling positioning state. 2. The relay is a heavy spring force DC electromagnetic relay, which uses the principle of "constant gravity" to force the moving and closing contacts to open when the coil is powered off. 3. It adopts silver-silver cadmium oxide contact, which has the characteristics of strong anti-adhesion and low contact resistance. 4. The magnetic circuit adopts electromagnetic pure iron material with small residual magnetism, and installs the stop piece at the closed position of the armature and the iron core to ensure the minimum air gap of the magnetic circuit, prevent the magnetization of the ferromagnetic parts of the magnetic circuit, and ensure the reliable fall of the relay. 5. The relay contact system is composed of ordinary contacts, with 8 groups of ordinary moving on and moving off conversion contacts. 6. The rated voltage of the relay is DC 24V.
Product Usage The JC type AC relay is used as a buck-boost control relay, a signal switch track power supply supervisory relay, and a main screen and a backup screen conversion relay in the power supply screen. Can replace JZXC-20000 rectifier relay. Features 1. The relay is an AC 220V heavy spring force electromagnetic relay with reinforced contacts. 2. The relay magnetic system is a clap-on AC magnetic system, which is composed of an iron core, a coil and an armature. 3. It adopts silver-silver oxide contact, which has the characteristics of strong anti-adhesion and low contact resistance. 4. The contact system is composed of ordinary contacts. There are four groups of moving on and off conversion ordinary contacts and two groups of moving and closing ordinary contacts. The structure of the ordinary contacts is the same as that of a non-polar relay. Applicable environment a) Ambient temperature: -40~+60; b) Relative humidity: not more than 90% (temperature +25C); c) Air pressure: not less than 70kPa (equivalent to an altitude below 3000m); d) Vibration: the vibration frequency is not more than 15Hz, and the amplitude is not more than 0.45mm; e) Working position: horizontal; f) There should be no harmful gas causing explosion hazard around, and good dust-proof measures should be taken. Dimensions
