We speak English/ Se habla Espanol/ Wir sprechen Deutsch/ en natuurlijk nederlands Same Chemicals is a reliable 50 year old company located in Netherlands. We represent well know producers such as Exxon and Shell, to name a few. Our chemicals are on spec and can proudly state our reliability in delivering chemicals on time in Europe and around the world. Please specify your chemical required, amount, and special requirements. Here are the rest of our products: Aromatics: Solvent Naphtha 100 Solvent Naphtha 150 Solvent Naphtha 150ND Solvent Naphtha 200 Xylene White Spirits Dearomatized: Hexane Isohexane Heptane SBP 40/65 SBP 80/95 SBP 80/95 SBP 80/110 SBP 100/140 SBP 140/165 D30 D40 D60 D70 D80 D100 D120 Styrene: Styrene Monomer Glycols: Mono Ethylene Glycol (MEG) Di Ethylene Glycol (DEG) Tri Ethylene
Introducing a better way of removing moisture from natural gas and/or other gases. The: GLYCOL-FREE DEHYDRATOR UNIT (GFDU) The Glycol-Free Dehydrator Unit (GFDU) is a technology that improves efficiencies while reducing operating/servicing cost. The Glycol-Free Dehydrator Unit (GFDU) has no moving parts, requiring less maintenance and best of all no glycol. With a no glycol system your company moves forward with a more environmentally friendly system of gas dehydration along with real cost savings. Current natural gas dehydration systems: 1. Utilize a 50-year-old outdated technology. 2. Release harmful BTEX emissions (benzene, toluene, ethylbenzene and xylene). 3. Vent billions of cubic feet of carbon and methane. 4. Require extensive maintenance and chemicals. The GFD is a revolutionary system that will change the way natural gas is dehydrated. It utilizes the energy from the pressure of natural gas to remove liquids and can be: 1. Customized 2. Scaled 3. Installed in series or parallel. Installed at the wellhead, plants, or gathering systems. Our technology completely eliminates the use of Glycol in the natural gas dehydration process. The GFDU: 1. Uses no harmful chemicals and emits no greenhouse gases. 2. Requires no moving parts, extending its operational life. 3. Brings a significant reduction in maintenance costs. Supersonic Separation - Removal of liquids in gas by cooling using isentropic pressure reduction at supersonic velocities coupled with cyclonic separation. The process employs supersonic separation using proprietary media and internal vessel geometry allowing: 1. High gas volume 2. Low production cost 3. Redundant media flow paths Pre-treater with built-in liquid knock-out section and second media-filled section for initial process liquid separation. GFDU units in series to further separate liquid
Di Propiline Glycol
Polyethylene Glycols - Carbowax PEG liquids, PEG200, 400,600 (liquids) & 1000 (paste).
Dipropylene glycol finds many uses as a plasticizer, an intermediate in industrial chemical reactions, as a polymerization initiator or monomer, and as a solvent. Its low toxicity and solvent properties make it an ideal additive for perfumes and skin and hair care products. It is also a common ingredient in commercial fog fluid, used in entertainment industry fog machines
With pure MEG (mono-ethylene glycol) the hot spot will reach 200 C (392 F). Cooling by other effects such as air draft from fans (not considered in pure nucleation analysis) will assist in preventing large-bubble formation. The mixture of ethylene glycol with water provides additional benefits to coolant and antifreeze solutions, such as preventing corrosion and acid degradation, as well as inhibiting the growth of most microbes and fungi.
We can supply Mono Ethylene Glycol on regular basis at the most competitive prices. Please contact us with your detailed requirement to help us quote you our best prices.
Diethylene glycol (DEG) C4H10O3 Cas:111-46-6 17tons (Availability)\2000$\tons min order 15 tons
Propylene glycol-Pure grade Packed in Liquid bag Very good quality-got the certificate needed
Propylene glycol-Tech grade and Packed in Liquid bag. Very good quality-got the certificate needed.
Propylene glycol-Tech grade and Packed in liquid. Products are of good quality,Got the certificate needed.
Nature:Propylene glycol fatty acid ester as powder, flakes, granules or wax block white to pale yellow brown, or sticky liquid. The color and shape of the product is related to the type of fatty acid, the HLB value of the pure propylene glycol stearate is 3.4, and the value of the pure propylene glycol mono stearate is, which is not soluble in water, and heat Water intense mixing can be emulsified, soluble in ethanol, ethyl acetate, chloroform and other organic solvents. Propylene glycol fatty acid ester emulsifying ability is not very strong, it is seldom used alone, often with the use of fatty acid ester of glycerol, can improve the emulsifying effect.Stearic acid and palmitic acid ester most propylene glycol is white solid. The product is a light yellow liquid with the production of oleic acid, linoleic acid and other unsaturated acids. In addition there are powdery, granular and waxy. Propylene glycol mono stearate HLB value of about 2~3, is a lipophilic emulsifier, insoluble in water, soluble in ethanol, ethyl acetate, chloroform, etc.. Properties and Applications: Has excellent foaming performance, good oil soluble emulsifier. 1, for shortening, bread, pastry and can prevent aging, improve the processing performance. 2, for ice cream, improve the expansion rate and the shape of the. 3, used in artificial cream, improve the pass, to prevent oil and water separation. 4, can also be used for cake, fried small food, composite seasoning. Production process: Propylene glycol fatty acid ester by propylene glycol and fatty acids, with potassium carbonate and lime and p-toluene sulfonic acid (about 0.1%) as catalyst, in the 120 ~ 180 DEG C heating 6~l0h of esterification reaction of reaction after removing the catalyst is obtained. Propylene glycol fatty acid ester is obtained by esterification of fatty acid and 2, 1 propylene glycol, the product is a mixture of mono ester and double ester, and then the propylene glycol fatty acid ester can be obtained by molecular distillation. Propylene glycol fatty acid ester has good foaming and emulsifying properties, its foaming capacity depends on the content of the single ester, the higher the content, the better the performance. It is commonly used as a foaming agent for cakes and cream cakes, and is often used in conjunction with a single and double fatty acid glycerin ester.
Colorless and transparent liquid; slight fragrance; the relative density is (20¡é/20¡é) 0.9536; the boiling point is 230.4¡é; the flash point (open) is 93¡é; there is a fire danger when it is exposed to fire, heat and strong oxidant; it is soluble in organic solvents such as water, ethanol, acetone and benzene; low poisonous; it is soluble in oil, natural resin, nitro cellulose, etc. Drum
Esterification dispersant chemical synthesis intermediate
Detergent, emulsifier, intermediate for organic synthetic
Propylene glycol/PG is an important raw material of unsaturated polyester, epoxy resin and polyurethane resin. We have all grades of propylene glycol, price is very competitive in the market, contact joyce to get the latest information. propylene glycol is widely used in like as below Industrial grade Propylene glycol: Used to produce unsaturated resin, polyether, epoxy resins, etc.; Used for organic synthesis of solvents, dehydrating agents and gas chromatography stationary liquids, synthesizing emulsifier, demulsifier, etc.; Used in cellophane, plasticizer industry; The aqueous solution of propylene glycol is an effective antifreeze;
C11-alcohol polyalkylene glycol ethers 11027 is a fatty alcohol poly-glycol ether, based on LIAL® 111, ethylene oxide and propylene oxide. Low-foaming fatty alcohol EO/PO derivative In 200 Kg Drums EXW Istanbul/Turkey 2500 USD/MT MOQ: 1 Pallet (800 Kg)
Diethylene glycol methyl ethyl ether 180KG/steel drum
Ethylene glycol diethyl ether c6h1402 cas# 629-14-1 [m.F.]c6h1402 m.W.:118.17 [properties]colorless transparent matter br:120-122centigrade degree [density]0.8415-0.8419(20centigrade degree) rr:1.3922 viscosity:0.7 [technical index] purity:>99%(gc) moisture:99%(gc) moisture:
Ethylene glycol dimethyl ether C4H10O2 Ethylene glycol dimethyl ether C4H10O2 CAS# 110-71-4 [M.F.] C4H10O2 M.W.:90.12 [Properties] Colorless transparent liquid ,dissolved in water and hydrocarbon solvent,non proton polar solvent .BR:84-86centigrade degree ,Density (20centigrade degree)0.8683,RR(20centigrade degree)1.3795,Viscosity(20centigrade degree)1.1,FP(open):1.11centigrade degree. [Technical index] Item Industrial grade Reagent grade Purity(GC)%> 99.5 99.9 Moisture%< 0.1 0.05 Acidity(HAC)%< 0.015 0.015 Peroxide(H2O2)%< 0.005 0.005 [Usage] Mainly used in polymer, electrochemistry, boracium chemistry, resin, nitro cellulose, In this product , the benzene, xenene, terphenyl, anthracene reacts with sodium and then bring about the complex; it is also used in surface treatment, halogen analysis in gasoline, acetic acid recycle in diluted acetic acid, depaint agent, thinner, flushing agent, stabilizer, anti oxidant , thickener of lube [Packing] 180kg/double sealing metal pail Ethylene glycol dimethyl ether C4H10O2 CAS# 110-71-4 [M.F.] C4H10O2 M.W.:90.12 [Properties] Colorless transparent liquid ,dissolved in water and hydrocarbon solvent,non proton polar solvent .BR:84-86centigrade degree ,Density (20centigrade degree)0.8683,RR(20centigrade degree)1.3795,Viscosity(20centigrade degree)1.1,FP(open):1.11centigrade degree. [Technical index] Item Industrial grade Reagent grade Purity(GC)%> 99.5 99.9 Moisture%< 0.1 0.05 Acidity(HAC)%< 0.015 0.015 Peroxide(H2O2)%< 0.005 0.005 [Usage] Mainly used in polymer, electrochemistry, boracium chemistry, resin, nitro cellulose, In this product , the benzene, xenene, terphenyl, anthracene reacts with sodium and then bring about the complex; it is also used in surface treatment, halogen analysis in gasoline, acetic acid recycle in diluted acetic acid, depaint agent, thinner, flushing agent, stabilizer, anti oxidant , thickener of lube [Packing] 180kg/double sealing metal pail