Super-Pro Interior Primer is applied before paint application on Interior walls. The primer helps to hide joints or seams on new dry wall. This primer is mainly recommended for outer/external surfaces because it provides a consistent base and offers a neutral surface to ensure that paint colours show true. Coverage area : 53 to 55 Sq.ft*/litre (2 Coats) Drying time : 30 min (Recoat Frequency : 1 hr)
Aqua Interior Primer is applied before paint application on interior walls. The primer helps to hide joints or seams on new dry wall. This primer is mainly recommended for new surfaces as it provides stain-blocking property and consistent base provides a neutral surface to ensure that paint colours show true. Coverage Area : 53 to 55 Sq.ft*/litre (2 Coats) Drying time : 30 min (Recoat frequency : 1 hr) Colours : white/Neutral
Name of the Product :Heat Reflective Paint for Metals Brand Name : Feel Cool MT Product Description : Reflects solar from the surface and prevents heat from passing into the building Unique Selling Proposition : High durability (5 Years), Corrosion resistance, Certification from CRRC USA, Waterproof Surface Properties : High Heat Reflection, elastomeric waterproof crack bridging, antifungal Application areas (surfaces) : Metal Applications : Warehouse, storage tanks Advantages : Energy saving, high-temperature difference, waterproof, antifungal Coverage (sq.ft per lit) : 33 to 35 Sq.ft /lit Surface Cleaning : Standard surface cleaning to remove dust followed by application Pack size : 1lt, 4 lt, 20 lt Certificate : Cool Roof Rating Council USA, NABL certified lab for Leed recommended testing
Nuvent Red Oxide synthetic primer is formulated for preventing Rust. This primer is used primarily on ferrous metal either Interior/Exterior surfaces in mild corrosive environment. Coverage Area : 47 to 49 Sq.ft*/litre (2 coats) Drying time : 40 min (Recoat frequency : 2 hrs)
TOA Plastic Primer Spray No.63 is special primer to enhance adhesion for plastic surfaces such as polypropylene, polyethylene and ABS. - Formulated by high quality concentrated resin - Used for exterior and Interior - 2 nozzles, normal and unique adjustable nozzles - Able to spray upside down - Good for all surfaces : wood, steel, and plastic - Excellent durability , quick drying, and good adhesion
* Excellent Adhesion on Aluminium * Compatible with any Stoving Top Coat for wet on wet application. * Can be used as an alternate to chromotizing on aluminium. No environmental pollution
SU-EPO-PRIME 10: is a two pack polyamide-cured epoxy primer containing Zinc Chrome as a corrosion inhibiting pigment. Primer is designed to give outstanding corrosion resistance and adhesion. It cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with epoxy and polyurethane intermediate coats and top coats. Two pack Epoxy-polyamide Zinc Phosphate Red Oxide Primer, direct application on ferrous metals. 2) SU-EPO-PRIME 20: is a two component Epoxy cold cured Zinc Chromate Primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 3) SU-EPO-PRIME 30: is a two component Epoxy cold cured Zinc Phosphate primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats. 4) SU-EPO-PRIME 31: is a two pack Epoxy cold cured Zinc Phosphate primer with high film build outstanding adhesion and corrosion resistance. Primer cures to a hard and tough film with excellent physical and mechanical properties. It is ideal for application in areas where higher thickness is recommended for achieving optimum performance. This product is universally recommended for direct application on mild steel or suitably treated light alloys or galvanized surface, after proper surface preparation. 5) SU-EPO-PRIME 32: is a two pack high solids polyamide cured epoxy resin surface tolerant primer with outstanding corrosion resistance. Primer contains good amount of anticorrosive pigment. It is ideal for application in areas where higher thickness is required for achieving optimum performance. The primer can be over coated with epoxy, chlorinated rubber or polyurethane topcoats. Primer has good adhesion to steel, galvanized steel and non ferrous metals. 6) SU-EPO-PRIME 40: is a two pack epoxy polyamide clear primer, recommended for direct application on concrete & wood substrates.
A two-pack polyurethane quick drying primer cum surfacer with excellent filling & sanding properties for application on wood (hard & soft) & wood substitutes like particle board, veneer, plywood etc. The formulation contains mixed isocyanate hardeners, inert & smooth sanding extenders. When used in combination with Maxiwood 2 PK PU Topcoat, the product gives an extremely rich finish. Presence of plasticizer in the formulation of Maxiwood 2 PK PU Primer Surfacer make the product flexible enough to withstand woods dimensional variation thus enhancing adhesion.
A high build two pack MIO pigmented epoxy primer with excellent water & chemical resistance . The product is very effective in marine and corrosive chemical environment. It has outstanding abrasion resistance and conforms to BS 5493 when used in combination with Wellguard epoxy / polyurethane topcoats. It has excellent wear resistance and exterior durability.
An anticorrosive primer based on high molecular, two pack, epoxy-polyamide resin system and anticorrosive pigment excellent drying, adhesion and abrasion resistance properties.
A two pack epoxy primer for concrete floor. The product penetrates deep into the surface over which it is applied & seals the voids eliminating entrapped air or moisture. It also acts as an adhesion promoter for subsequent coats of floor coating system hence referred as bonding primer.
VFLOOR2 are two component waterproof Self Leveling Mortar. Once cured, it provides a smooth, level surface on which to install a variety of floor coverings. Suitable for prepairing interior floors prior to laying parquet, vinyl sheet and tile, soft floor covering, natural stone, ceramic tiles, etcâ?¦ It can be used on a wide range of absorbent and non-absorbent floor surfaces including concrete, cement and sand screeds, terrazzo, asphalt, ceramic & quarry tiles. Layer-thickness 2-10mm Can be pumped Product name: Self leveling concrete without primer VFLOOR2 Compressive strength: >35 Mpa, 28 days later Flexural strength: >7 Mpa, 28 days later Application Temperature: 5-30 degree Mixing ratio: 20kgs powder + 5kgs Liquid Feature & Benefits: - Two component, just mix A+B - Waterproofing - Good adhesion to primed substrates - Good flow, self smoothing - Rapid setting and early strength - Easy and quick to lay Mixing: Convenient easy mix ratio A:B = 4:1 by mass. Mix slowly and continuously to form a homogeneous mixture. The mixed materials is immediately ready to use and should be used within 30-40 minutes after mixing. Ready for foot traffic after approx. 24 hours. Drying time: Prevent draughts across the floor to avoid localized premature drying At ambient temperature, VFLOOR2 will appear to be dry after approximately 24 hours, ready for foot traffic after approx. 24 hours. Floor laying may commence after 48 hours. Coverage: At an application thickness of 2mm the coverage will be approx. 5kgs per 1m2 Shelf Life: 9 months.
HomeSure Primabond is multipurpose white cement based dry powder primer specially blended and developed with supreme quality polymer for durability, adhesion and strength which is ideal for interior and exterior wall. It has excellent alkali resistance and water proofing properties which provides an excellent a strong base and enhances the quality and coverage of decorative paints and other acrylic polymer based coatings. Moreover, it is easy to apply and can be used as an under coat. It also effectively seals all construction flaws, making the surface stronger and beautiful. Features : - Quick drying - No wastage - High durability - Excellent adhesion to base plaster - Excellent sealing properties - Super whiteness & opacity Advantages : - Saves time - Reduces paint consumption - Ease to use/apply - Less surface absorbent - Excellent smooth finish - Consistent work quality Benefits : - Value for money - No need of curing - No odour - Can be used on wet surfaces - Good resistance to moisture - Enhanced coverage & finish of coatings Surface Preparation : - Before application of Primabond, ensure to clean the surface and remove all loosely adhering material from the wall surface with help of sand paper, putty blade or wire brush. - The substrate should be clean, free from dust, grease and loose materials. Moisten the wall with sufficient quatity of clean water. - For loose plaster areas, remove the defective material and re-plaster the area with Easyplast Ready-Mix plaster. - In case of cracks, voids or any minor damage in base plaster, fill the cracks by using Crack Filler prior to the application. - Pre wet the surface to get better workability, binding properties and coverage for achieving better results (Very Important). Mixing Process : - Take clean water in a bucket/pot and pour Primabond very carefully to water measuring 50% (& not vice-versa). In a ratio of 1:1. - With the help of mechanical stirrer or hand mix the mixture for about 5 minutes to obtain a free flowing homogenous lump free smooth paste.
We are the reputed Water Based Primer supplier and importer of MICA A-251-A in India - Contact us now to Get a Quick quote for Water-based PEI primer for bonding PE to clay-coated surfaces in India by MICA Corporation.
Each group is divided into two components at the proportion of 30:4.5, weighing 34.5kg. It is used as first run of protective primer of heavy duty anticorrosion coating, featuring good anticorrosion performance, thinning after adding water, environmental friendly, no harm.
It is mainly used for anticorrosion and decoration for steels like various C-type steel, H type steel, Z type steel, outdoor handrail, etc; featuring large area application, good color, primer-topcoat combination, reducing construction operations, high performance price ratio, thinning after adding water, environmental friendly, no harm.
Features: 1.Strong adhesion,high compactness and super anti-rust 2. Excellent weather resistance to harsh summer and winter, acid and alkali resistance, high solid content 3. Superior flexibility of paint film 4.Easy application Application site: 1.Bridge, steel structure, iron tower,vehicle and steel equipment 2.Wooden products
Features: 1. Super sealing and good anti-mildew performance 2. Good for wall penetration and excellent adhesion 3. With advanced IPST tech, odorless and fresh smell primer 4. Easy coating, good alkali resistance, good for wall penetration and reinforce substrate
Two component air drying Epoxy based clear primer with Polyamide as curing agent. Recommended Use :- This product is recommended as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system. Physical Data :- COLOUR : Clear FINISH : Smooth & Glossy SOLIDS BY VOLUME : 50 �± 3% THEORETICAL SPREADING RATE : 20 sq.mt. / ltr. at a recommended DFT of 25 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30�°C) : HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Thorough surface preparation is vital. For best results, saffro recommends mechanical preparation techniques (Eg. mechanical scarifying, grit or sand sweeping), a) New Concrete Surface :- New concrete surface should be at least 28 days old and/or have moisture content of less than 5% before proceeding with primer application. Laitance and deposits on new concrete are best removed by light grit blasting, mechanical scarification or grinding. Acid etching may be considered for smaller areas, after etching the floor, it should be thoroughly washed with clean water, and then allowed to dry. b) Old Concrete Floors :- Mechanical cleaning methods are strongly recommended on old concrete surfaces, particularly their heavy contamination by oil and grease has occurred or old coatings is present. To ensure good adhesion, all contaminants are removed and the surface thoroughly cleaned of all dust and loose debris. A thorough detergent wash is also recommended followed by thorough cleaning with water and moping it off to a dry state.
CA-010P as a water-based primer in relation to water absorption reduction and increase the bonding strength of cement to reinforcements other than being used as admixtures increase the mechanical properties and the adhesion of the hardened material. AREA OF APPLICATIONS Repair mortar for concrete areas Industrial flooring Bonding agent for new to old concrete Enhance adhesion strength of mortar
