Reinforcement mesh is a welded wire fabric, prefabricated steel reinforcement material. It has a rectangular or square reinforcement mesh grid pattern and is produced in flat sheets. Reinforcement mesh sheets are usually 6m long x 2.4m wide as standard. Concrete reinforcing mesh is superior quality welded wire mesh panels with flat even surface, firm structure. This welded wire mesh panel offers flat even surface and firm structure. It can be used extensively in building, food, agriculture, and serve in construction and fencing applications. We offer three types of concrete reinforcing meshes: welded stainless steel wire mesh panels, galvanized welded mesh panels, and hot-dip zinc plating welded mesh panels. The reinforcing mesh length does not limit. Applications: industrial, manufacturing, guarding, security, enclosures, large animal enclosures, quarantine caging, fencing and gabions.
Brief Description: PLATIVE PLP4500 plating layer protective paint, is designed to protective the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability. The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration. Operational Guidance: Prefabricated, diluted PLATIVE PLP4500 to a proper consistency and add 15% -25%to total PLATIVE SN30, mix completely. Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 in 50 minutes, or air dry in more than 12 hours. Annotation: Before use, low-speed mixing of PLATIVE PLP4500 is required; dilute the product with special solution ALATIVE PLP4500, or else it could lead to paint deterioration.
NSF full name is Naphthalene Sulfonate formaldehyde condensate. Its high purity makes cement paticles with high dispersancy, low foaming, high range water reducing and obvious strengthening so that we can get advantages of accelerating project mould turnover and construction speed, and also saving cement, improving cement mobility and workability. NSF is a high range concrete admixture of concrete cast-in-place, prefabricating, pump and curing. NSF has a good adaptability to various cements and NSF is no erodent to reinforcing bar and nonpoisonous and pollution-free. NSF has been applied to the highway, bridge, tunnel, water conservancy hydroelectric project, port, quay, skyscraper, power engineering, industrial civil building, prestressing force component and high range concrete etc. 25kg/bag.
Name: H20 Timber Beam For construction use. Carry film faced plywood. Made of high-grade solid sawn lumber and plywood. Around4.8-5.2kgs per running meter. Treated by Water Proof Glue. (WBP) Prefabricated wood H20 beams are manufactured in a range of sizes. Long lengths use fingerjoining to splice flanges and butt jointing or toothed, tongue and groove or scarf configurations to splice the webs. The actual length is limited only by transportation restrictions Resistant to rough handling and extreme use with longer service life. Weight per running meter: 4.8-5.2k kg Mechanical specification: Bending moment max.5 Kn.m Cutting action max 10.0KN Bending max1/500 Live load max 500 KN/m2 Length in cm 180 - 245 - 290 - 330 - 360 - 390 - 450 - 490 - 590. standard export wood pallet
For construction use. Carry film faced plywood or other types shuttering panels in formwork to cast cement or concrete. Made of high-grade solid sawn pine lumber. Prefabricated wood h 20 beams are manufactured in a range of sizes. Long length adopt fingerjoint to splice flanges and butt jointing or toothed, tongue and groove or scarf configurations to splice the webs. Ubest h20 beam Available length: (in cm) 180 íºc 190 íºc 245 íºc 250 íºc 290 íºc 330 360 íºc 390 íºc 420 íºc 450 íºc 490 íºc 590 Weight per running meter: 5.0kgs Bending moment íºc max.5 kn.M Cutting action íºc max.11.0 kn Bending íºc max.1/500 Live load (bending stiffness) íºc max.500 kn/m2 Standard export pallet with plastic belt
JPF2 fixed type metal-enclosed switchgear assembled from modular elements of SF6 insulated switch-disconnector, SF6 switch-fuse combination or vacuum circuit-breaker, in compliance with IEC 298, IEC 420 standards. It is suitable for switching of load current, and controlling the network. It is widely used in medium voltage public distribution systems, high/low voltage prefabricated substation and ring main units. Ratings Rated voltage (kV) 24 Rated bus bars current (A)630 Rated feeder current (A)630 Rated peak withstand current (kA)50 Rated short-time withstand current 2s (kA)20 Cubicle dimension W375(500, 750)*D900*H1900
For construction use. Carry film faced plywood. Made of high-grade solid sawn Pine lumber and Pine plywood. Prefabricated wood H 20 Beams are manufactured in a range of sizes. Long lengths use fingerjoining to splice flanges and butt jointing or toothed, tongue and groove or scarf configurations to splice the webs. The actual length is limited only by transportation restrictions Weight per running meter: 5.2-5.8 kg Mechanical specification: Bending moment íºC max.5 kN.m Cutting action íºC max 11.0KN Bending íºC max1/500 Live load (Bending Stiffness) íºC max 500 kN/m2 Length in cm 180 - 245 - 290 - 330 - 360 - 390 - 420 - 450 - 460 - 490 - 590
JS series concrete mixer JS500 750 1000 1500 2000 As a double-horizontal-shaft forced type concrete mixer, the JS series concrete mixer has been provided with double superiorities, that is single-independent work and combinatorial function with PL series burden machine, also provide the matching engine for mixing plant, it applies to all kinds of large, middle and small scale prefabricated-component factory as well as industry and Civil Construction like highway railway bridge irrigation jetty and so on. With a high efficiency, this machine can be applied to all kinds of material, such as harsh concrete plastic concrete lightweight aggregate concrete and others. With reasonable structure, novelty layout and easy operation and maintenance, we can make design according to special requirements for meeting the demand of customers.
Made up of the burdening mixing electrical control system and so on, it applies to all kinds of large, middle and small scale prefabricated-component factory as well as industry and Civil Construction .HZS series concrete batching plant is a full automation complete equipment with high precise microcomputer control system as well as single manual control, besides, the machine is equipped with matching memory difference auto compensation and printing system, and so it can complete preconcreted production automatically. The main machine is JS series double horizontal shaft forced concrete mixer , mixing best , efficiency highest. Using the PL series concrete batching machine , it is designed according to the customerí»s demands , Adopt electronic scale to measure the aggregate powder liquid material with high precision.
Setting time of gypsum can be regulated casually. Strength loss rate is small of hardened gypsum mixed with GR. Application: For plaster gypsum, glue gypsum, prefabricated gypsum components, gypsum stuffing, gypsum model broad and gypsum decoration coating etc. For good fluidity of powder form, GR can be mixed well with gypsum, no matter with spiral mixing or grinding. Operating time of gypsum mortar can be lengthened by one odd hour. Specification: Appearance: white powder or grey powder Solid content (%): 95 min. PH value (20 degree C., 20% solution) 6-8 Suggested mixed amount: 0.1-1.5% Packing: 25KG / bag Gypsum Retarder Send a message directly to this member offline Supply indirect zinc oxide Packing: 25KG / bag
Loader with grapple pitchfork Features specifications: zl-10 grasps the pitchfork Zl-10 grasps the pitchfork 1. Using direct injection diesel engine as power, with easy startup and low oil consumption 2. Using special drive axle, with strong ability to overcome obstacle 3. Chassis uses hinged structure, with small turning radius and flexible turning, which applies to the operation in narrow space 4. This machine uses hydraulic operation, with simple structure, convenient operation, good performance and reliable quality 5. Widely applying to the construction of agricultural engineering and small and medium building such as road, coal mine, brickyard, urban construction, kiln factory, stone material factory, prefabricated cement parts factory, etc. Cbu
H20 beam For construction use. Made of high-grade solid sawn pine Lumber and pine plywood. Prefabricated wood i-joists are manufactured in a range of sizes. Long lengths use fingerjoining to splice flanges and butt Jointing or toothed, tongue and groove or scarf configurations To splice the webs. The actual length is limited only by transportation restrictions. Weight per running meter: 5.2-5.8 kg Mechanical specification: Bending moment c max.5 kn/m Cutting action c max 10.0kn Bending c max1/500 Live load c max 1.5 kn/m2 Length in cm 180 - 245 - 290 - 330 - 360 - 390 - 450 - 490 - 590 Packing*: package prepared for loading with a forklift
Copper sinks We are stone based company specialize in prefabricated slabs, vanity tops and granite sinks for usa market, with serval years history to consolidate stainless steel sinks , ceramic sinks , granite sinks and marble sinks for our customer distribute and project use, we have full experience in sinks business and find good market for copper sinks. After reviewing the sinks made by mexican, india and usa supplier, we find most strong are make them from china. With serval montn research and trial making, we move a lot of difficulty and now already start the offical production and have good comments from our usa customer. Please contact us as soon as possible, because we may be first one located china to make copper sinks for export. Carton or crate
Pipes & ducts are manufactured using the "dual helix" filament winding process on computer controlled machines. By adjusting the relative speed of mandrel rotation and glass distribution head movement, helical reinforced layers with different angles can be wound. In order to increase the pipe stiffness, especially on large diameter pipes, silica sand can be added to parallel layers of wall. Nominal diameter Nominal size of pipe and fitting is based on internal diameter. The range of available sizes is 25 to 3000 mm. Nominal pressure classes: Pipes and fittings are classified according to nominal pressure. Standard pressure classes are 4, 6, 10, 16, 20 and 25 bars. Intermediate or higher-pressure classes are considered on request or depending on the design parameters and conditions Nominal lengths Pipes have a length of six meters up to nd150 and 12 meters for bigger diameters. Fittings A wide range of fittings as elbows, reducers, tees, caps, flanges etc. Is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface Prefabrication spools Prefabricated spools save installation time as well as costs, freeing the designer from being limited to standard fittings and allowing junction sizes shapes to be specified and manufactured as a better alternative to a complex series of joints.
Plative PLP4500 plating layer protective paint Brief description Plative PLP4500 plating layer protective paint, is designed to protect the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability. The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration. Operational guidance Prefabricated, diluted plative PLP4500 to a proper consistency and add 15% -25% to total plative SN30, mix completely. Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 ¡æ in 50 minutes, or air dry in more than 12 hours. Annotation Before use, low-speed mixing of plative PLP4500 is required; dilute the product with special solution alative PLP4500, or else it could lead to paint deterioration. Plative PLP4500 plating layer protective paint brief description Plative PLP4500 plating layer protective paint, is designed to protect the plating layer by improving abrasion resistance, scratch resistance, chemical corrosion resistance, insolation and heat stability. The paint of transparent has no effect on the color of plating layer, besides the paints of colorful can make the plating layer with different coloration. operational guidance Prefabricated, diluted plative PLP4500 to a proper consistency and add 15% -25%to totalplative sn30, mix completely. Clean and dry the plating layer, make sure no oil, no dust. To paint the layer with prepared paint by spraying, immersion or drawing. Then forced dry at 120 in 50 minutes, or air dry in more than 12 hours. Annotation Before use, low-speed mixing of plative plp4500 is required; dilute the product with special solution alative PLP4500, or else it could lead to paint deterioration.
Product Description NSF full name is Naphthalene Sulfonate formaldehyde condensate. Its high purity makes cement particles with high dispersancy, low foaming, high range water reducing and obvious strengthening so that we can get advantages of accelerating project mould turnover and construction speed, and also saving cement, improving cement mobility and workability. NSF is a high range concrete admixture of concrete cast-in-place, prefabricating, pump and curing. NSF has a good adaptability to various cements and NSF is no erodent to reinforcing bar and nonpoisonous and pollution-free. NSF has been applied to the highway, bridge, tunnel, water conservancy hydroelectric project, port, quay, skyscraper, power engineering, industrial civil building, prestressing force component and high range concrete etc. Chemical Compositions: Type FDN(Na2SO4: 5.0% max. ) Appearance: Yellow beige. Water content: 8% max. Fineness (residue on 0.315mm): 15% max. PH Value (10g/L): 8í+ 1. Cl: 0.4% max. Na2SO4: 5.0% max. (Na2O+0.658K2O): 4% max. Cerment paste fluidity: 210mm min. We also have: Type UNF-5(Na2SO4: 20.0% max. ) Technical features & adaptability: 1. Mixing amount: 0.5-1.0% of cementing materials, reducing rate: 20-30%. 2. Keeping concrete strength intact & mixing this product, cement saving amount can reach 15-20%. 3. Mixing this product 0.7% (solid content), slump constant increases above 10cm. 4. Adapting to high strength, early strength, flowing, prefabricating & curing and prestressing force concretes etc. 25kg/bag
Rugs and carpets.
Manufacturer & suppliers eco friendly shopping bags jute,cotten etc &one time used ball pen..
Organic noodles, cup noodles, milk shake, mulberry tea and baby food.
Coconut oil.
