UNI-T Series UTL8211 UTL8212 150V 20A Electronic Load Programmable Digital DC Load Mobile Phone Battery Tester Power Supply Current Test Tool. Features: The UTL8200 Series is designed for users requiring a DC load with a compact form factor which is widely used in basic applications. Small size with a 2.8-inch large screen LCD display, easy operation, rich testing functions and modes: It is made for dual-channel independent testing, and meets your diversified test requirements. A wide range of power measurement: voltage and current measurement speed up to 40kHz, test resolution up to 1mV/1mA,the UTL8200 series is a cost-effective DC load with performance specifications that rival any instrument in its class. Multiple protection functions: Various protections such as over voltage, low voltage, over current, over power, over heat, anti-reverse connection, etc. RS-232C communication interface, intelligent temperature control fan, new power-off memory function: the interface supports PC software to realize remote operation; the control fan can effectively reduce noise and help prevent the instrument from overheating; power-off memory: power on again to restore the last saved setting value. Built-in 7 test working modes: CC/CV/CR/CP/dynamic/list/battery modes. Product Parameters: Test resolution: 1mV/1mA Voltage test range: 0~150V Current test range: 0~40A (UTL8211), 0~20A (UTL8212) Power test range: 0~400W (UTL8211), 0~200W (UTL8212)
SPPS-S Series DC power supply variable with memory, 60V 5A adjustable switching regulated DC bench linear power supply with memory recall and output disables button 4-Digits display and alligator leads for mobile phone repair tool. Features: Easier to Set Values: Encoder switch is used on DC power supply 2021 version to replace the potentiometer switch which is widely used but not easy to adjust. On this version you can just â??setâ?? Voltage and Current instead of â??adjustâ??. Make works accurate, easy and fast. 4 Groups of Internal Memories: You can set 4 groups of commonly used Voltage and Current combination and easily recall them by press â??M1-M4â??. Use the â??ADJUSTâ?? knob to set new combinations. Output Switch Control: Sometimes we need to switch between different voltage or current outputs, but we often forget to unplug the previous instrument and cause it to burn out, which often occurs in the maintenance. Output switch is designed to solve this problem. By pressing the On/Off key, the required voltage and current can be adjusted without the actual output power, which makes this bench-top DC power supply more secure and more energy efficient. Reliability and Safety: Variable power supply uses premium electronic components, provides reliable working status and prolongs the product's life effectively. Many safety measures are adopted in power supply- Grounding wire, Leakage protection, Thermal protection, Voltage overload, Power overload and Short-circuit protection. When the working temperature is more than 122â??/50â??, the intelligent thermal protection will activate the cooling fan to lower the temperature according to the load. Compact and Various Application: This DC power supply is less than 3 lb and measures only 9.9 x 3.3 x 6.7 inches, with a high resolution of 00.01V and 0.001A, led 4 digits display. You can easily tune it within 0-60V and 0-5A, applies for laboratory, school, repair, electrolyzation, electroplate, brush plating, lamp test, aging testing, battery charge, home DIY and other requirements. Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. SPPS-S Series DC Bench Power Supply Input Voltage 230V�±10% 50Hz/115V�±10% 60Hz Input Voltage: 230V�±10% 50Hz/115V�±10% 60Hz Working Temperature: 0 â??-40â??; Relative Humidity: ï¼?80%RH Storage Temperature: -10 â??-70â??; Relative Humidity: ï¼?70%RH Constant Voltage State: Voltage stabilityâ?¤1%�±3mV Load stabilityâ?¤1%�±3mV Ripple noiseâ?¤50mVrms Constant Current State: Current stabilityâ?¤1%�±3mA Load stabilityâ?¤1%�±3mV Ripple noiseâ?¤50mArms Display Accuracy: 1%�±5digits Display Resolution: Voltage: 00.01V / Current: 0.001A Product Dimension: 9.9 x 3.3 x 6.7 inch / 252 x 84 x 170mm Product Weight: 2.64lb / 1.2kg Fuse Standard: 5A (AC 110V Input)
Kaisi 3005D+ CNC DC Power Supply 4 Bits Voltage Switching Regulator 30V 5A Output Digital Variable DC Power Supply. Kaisi 3005D+ Laboratory Transformer 110V 220V Voltage Regulator Mobile Phone Repair Tools. Features: 30V/5A full digital power control single 10mV/1mA high accuracy and resolution Low noise and ripple CV/CC given voltage and constant current mode Highly reliable OCP, OVP, arbitrarily set protection Outputs a switch control Power and memory function Keypad lock to prevent misuse An intelligent temperature control fan effectively reduces the noise. 0-30V adjustable DC output high-precision. 10mV and 1mA resolution Professional power supply design with intuitive operability. Simple and intuitive operation, fast and accurate selection of voltage and current can be realized. To prevent damage to the load can be set to the value of over-voltage protection and over-current protection to prevent the voltage regulator from beyond the threshold can The keyguard lock panel buttons to prevent undesirable results in the key test engineering Just press the button to recall and save area a key to bring up the user to store the data and save user settings Specification: Operating Conditions: Input voltage:220V / 110V Frequency range: 50- 60Hz Operating temperature: 32-104 â?? (0-40 �ºC) Operating humidity: < 80%RH Storage temperature: 32-158 â?? (0-70 �ºC) Storage humidity: < 70%RH Stable Voltage: Output Voltage Range: 0-30V Continuously adjustable Setup Resolution: 10mV Setup Accuracy:
Sugon 3005PM 30V 5A adjustable DC Power Supply with 4 digits display screen and 8 USB ports for mobile phone, iPad, MacBook, other electronic devices repair. Features: 1. 150W 30V 5A full digital power control single. 2. Increase the load power display, and display the working status of the load power supply. 3. High and low voltage (8.4/30) limited conversion is provided, and 8.4v is suitable for laptop maintenance. 4. More USB interfaces are provided without back and forth plugs and replacement. 5. There are six sets of intelligent USB adjustable outputs and two sets of fixed 5V/2A current outputs. 6. Four memory buttons, one-second reading, and three seconds of storage can also store voltage, current, continuous overcurrent/single overcurrent/protection settings. 7. The voltage and current are stable and reliable, without peak output. Under the constant current and constant voltage mode, the current and voltage remain stable without fluctuation even under the influence of various factors. 8. Ring transformer, which can work at high temperatures without affecting the service life of current. 9. Over the current protection setting, more stable protection of the machine. Specification: Model: SUGON 3005PM. Power: 150W. Product size: 230x125x25mm. Package size: 300x200x255mm. Weight: 5KG.
Sugon 3005PM 30V 5A adjustable DC Power Supply with 4 digits display screen and 8 USB ports for mobile phone, iPad, MacBook, other electronic devices repair. Features: 1. 150W 30V 5A full digital power control single. 2. Increase the load power display, and display the working status of the load power supply. 3. High and low voltage (8.4/30) limited conversion is provided, and 8.4v is suitable for laptop maintenance. 4. More USB interfaces are provided without back and forth plugs and replacement. 5. There are six sets of intelligent USB adjustable outputs and two sets of fixed 5V/2A current outputs. 6. Four memory buttons, one-second reading, and three seconds of storage can also store voltage, current, continuous overcurrent/single overcurrent/protection settings. 7. The voltage and current are stable and reliable, without peak output. Under the constant current and constant voltage mode, the current and voltage remain stable without fluctuation even under the influence of various factors. 8. Ring transformer, which can work at high temperatures without affecting the service life of current. 9. Over the current protection setting, more stable protection of the machine. Specification: Model: SUGON 3005PM. Power: 150W. Product size: 230x125x25mm. Package size: 300x200x255mm. Weight: 5KG.
KPS series DC power supply is a single output, high-precision dual display switching DC power supply. The machine has complete operation protection function, high efficiency, low ripple, high stability and small volume. Current limiting protection protects the KPS power supply and load from accidental damage. KPS series power supply has temperature control circuit and low intelligent heat dissipation noise. Small size, light weight and high power density. Constant pressure and constant current switch automatically. Three LED display of voltage, current and power, high precision Temperature controlled fan cooling, low noise, long life Features: 1. Production line test. 2. Mobile phone maintenance, computer maintenance, electrical appliance maintenance,Car DVD, car audio. 3. Product aging, electroplating,such as resistors, capacitors, relays, DC motors, LEDs, etc. 4. Charge the battery. 5. Laboratory, scientific research teaching,factory, maintenance power supply.school laboratories scientific research and production line use 6. All other occasions requiring DC power supply. Packages: 1x DC power supply 1x power cord (EU,US,UK,AU) 1x Test line 1x Instructions
192W 32V 6A high stability DC switching power supply with OVP/OCP protection function with 3 sets of voltage and current storage presets with output protection function K3206D Features: High-precision storable DC power supply 3 sets Voltage and Current Preset Output ,4 digit display With OCP/OVP output protection function Full load continuous output Electric Current / voltage can be continuously adjusted within nominal values MCH-K3206D 32V 6A Orientation Fine Tune Feature DC Regulated Programmable Storage 3 Group Power Supply MCH-K3206D Programmable LINEAR DC Regulated Power Supply. . Adjustable current and voltage .3setsofdatastorage(M1IM2IM3) . Output confirmation switch . Continuous output at full load With OCP (overcurrent) 1 OVP (overvoltage) output protection function . The current I voltage is continuously adjustable within the nominal value .4 digits display
SUGON 3005D DC Power Supply Adjustable 4 Digits Display 30V 5A Power Supply for phone repair. Laboratory Digital Power Supply 110V 220V Voltage Regulator. Features : 30V/5A full digital power control single 10mV/1mA high accuracy and resolution Low noise and ripple CV/CC given voltage and constant current mode Highly reliable OCP, OVP, arbitrarily set protection Built-in set of parameters stored Outputs a switch control Power and memory function Keypad lock to prevent misuse An intelligent temperature control fan, effectively reduce the noise An easy alternative to traditional digital power Precisely generate the required voltages and currents. 0-30V adjustable DC output high-precision. 10mV and 1mA resolution. Professional power supply design with intuitive operability. Simple and intuitive operation, fast and accurate selection of voltage and current can be realized. To prevent damage to the load can be set to the value of over-voltage protection and over-current protection to prevent the voltage regulator from beyond the threshold can The keyguard lock panel buttons to prevent undesirable results in the key test engineering Just press the button to recall and save area a key to bring up the user to store the data and save user settings Specification : Operating Conditions : Input voltage: 220V Frequency range: 50- 60Hz Operating temperature : 32-104 (0-40 C) Operating humidity : 80%RH Storage temperature : 32-158 Storage humidity : 70%RH Stable Voltage : Output Voltage Range: 0-30V Continuously adjustable Setup Resolution : 10 mV Setup Accuracy :
UNI-T UTP3305 Dual channel DC Power Supply 32V 5A Precision Variable FEATURES: Dual channel, two circuits of adjustable output voltage 0~32V and one circuit of fixed voltage 5V. Master-slave tracking, constant voltage and current, I, II circuit can be used for master-slave tracking and used in parallel or in series. Forced ventilation, temperature control cooling system. When the temperature reaches 65, the device dissipates heat automatically. Display mode: LED digital tube display,can show voltage and current simultaneously. Low ripple, low noise. High regulation: 0.01%. Output ON/OFF control. Constant voltage and constant current operation. Optional European standard output terminal. Overload protection, reverse polarity protection. TECHNICAL SPECIFICATIONS: Channels CH1 CH2 CH3 Output Voltage 0~32 V 5 V Fixed Output Current 0~5 A 3 A Max Series Tracking 0~64 V - Parallel Tracking 0~10 A - Load Regulation Voltage 0.01%+3 mV 3%+5mV Current 0.2%+3 mA - Power Regulation Voltage 0.01%+3 mV 5 mV Current 0.1%+3 mA - Noise Voltage 1mVrms 2 mVrms Current 3 mArms - General Characteristics Power Supply Input voltage 220VAC/110VA Frequency 50Hz/60Hz Product Color White+Grey Product Weight About 10.5 kg Product Size (WHD) 260mm 176mm 317mm
SUNSHINE P-3005A 30V 5A DC power supply for mobile phone repair. Sunshine digital programmable adjustable 4 bits digital accurate display laboratory power supply. Product Features : The 5A adjustable dc power supply is with high quality and high power transformer, the machine power is enough, can really achieve the voltage output 30V, current output 5A, and can accurately set the protection current size. 4 bit accurate control and display, bring more precise control, and constant pressure flow protection mode, effective protection of the safety of the load. The whole process circuit after the factory more than 10 years of continuous improvement and innovation, precise control, mature technology, high safety, stable and reliable by users at home and broad is certainly. 4 built-in temperature control protection circuit, when the machine internal heating temperature of over 40 degrees, the cooling fan will automatically run, when the power is connected to load more than the maximum load of the machine will automatically protect, stop output, effectively protect the use of power supply safety, extended service life. Primary Technical Parameter : Rated working condition Supply voltage AC220V ±10% frequency (50hz ) Working condition temperature -10C-40C, relative humility 90% Storage condition temperature -10C-40C, relative humility 80% Output : Voltage 0-30V Current 0-5A Protection types circuit protection,overload and over high temperature protection. Product Specification : Product Name: NC programmable DC Power Supply Model: P-3005A Product Size: 110 (W) *156 (H)*260 (D) mm Weight: 4.5kg Output Voltage: 0-30V Output Current: 0-5A Number of channels: single channel Output resolution: Voltage: 1mV Electric current: 1mA Display Type: Voltage/Electric current/4 digit digital display Load Effect: Voltage: 0.01%+2mV Electric current: 0.02%+10mA Power supply effect: Voltage: 0.01%+3mV Electric current: 0.02%+3mA Set Accuracy: Voltage: 0.5%+20mV Electric current: 0.01%+ 10mA Ripple: Voltage: 2mVrms Electric current: 3mArms Output Temperature Coefficient: Voltage: 150ppm Electric current: 150ppm Warranty : 1 Years warranty. As usual, the shipping fee is high. If return China to repair, is not worth the money. So we could support technology and give you the spare parts along with the product.
SUNSHINE P-3005A 30V 5A DC power supply for mobile phone repair. Sunshine digital programmable adjustable 4 bits digital accurate display laboratory power supply. Product Features : The 5A adjustable dc power supply is with high quality and high power transformer, the machine power is enough, can really achieve the voltage output 30V, current output 5A, and can accurately set the protection current size. 4 bit accurate control and display, bring more precise control, and constant pressure flow protection mode, effective protection of the safety of the load. The whole process circuit after the factory more than 10 years of continuous improvement and innovation, precise control, mature technology, high safety, stable and reliable by users at home and broad is certainly. 4 built-in temperature control protection circuit, when the machine internal heating temperature of over 40 degrees, the cooling fan will automatically run, when the power is connected to load more than the maximum load of the machine will automatically protect, stop output, effectively protect the use of power supply safety, extended service life. Primary Technical Parameter : Rated working condition Supply voltage AC220V �±10% frequency (50hz ) Working condition temperature -10�°C-40�°C, relative humilityâ?¤90% Storage condition temperature -10�°C-40�°C, relative humilityâ?¤80% Output : Voltage 0-30V Current 0-5A Protection types circuit protection,overload and over high temperature protection. Product Specification : Product Name: NC programmable DC Power Supply Model: P-3005A Product Size: 110 (W) *156 (H)*260 (D) mm Weight: 4.5kg Output Voltage: 0-30V Output Current: 0-5A Number of channels: single channel Output resolution: Voltage: 1mV Electric current: 1mA Display Type: Voltage/Electric current/4 digit digital display Load Effect: Voltage: â?¦0.01%+2mV Electric current: â?¦0.02%+10mA Power supply effect: Voltage: â?¦0.01%+3mV Electric current: â?¦0.02%+3mA Set Accuracy: Voltage: â?¦0.5%+20mV Electric current: â?¦0.01%+ 10mA Ripple: Voltage: â?¦2mVrms Electric current: â?¦3mArms Output Temperature Coefficient: Voltage: â?¦150ppm Electric current: â?¦150ppm Warranty : 1 Years warranty. As usual, the shipping fee is high. If return China to repair, is not worth the money. So we could support technology and give you the spare parts along with the product.
Korad KA3005D DC power supply digital programmable 30V for mobile phone repair, KA3005 digital power supply station, precision adjustable DC power supply programmable power supply. Heavy duty single-channel, constant-voltage and constant-current linear power supply with low ripple and noise, high reliability and high accuracy. Note: KORAD KA3005D is only 220v in our area, if you chose 110v, you will get replacement: Sunshine P-3005A (same functions) KORAD KA3005D 30V 5A Programmable DC Power Supply For Phone Repair Compact Design : Dual 4 Digit LED Displays ( Precision Variable Adjustable ) Digital Controls Output switch control 4 sets of parameters can be stored inside for fast recall Keyboard Lock to prevent accidental changing of set parameters Circuit protection for over load, short circuit and over temperature. Automatic switching between mA and A display Quiet variable speed fan Operating Conditions : Input voltage: 220V / 110V +/-10% Frequency range: 50- 60Hz Operating temperature: 32-104 F (0-40 oC) Operating humidity: < 80%RH Storage temperature: 32-158 F (0-70 oC) Storage humidity: < 70%RH Stable Voltage : Output Voltage Range: 0-30V Continuously adjustable Setup Resolution: 10 mV Setup Accuracy:
MCH-K305D K303D Single Channel 0-30V 0-3/5A mini DC power supply, MCH-K305D MCH-K303D SMPS have three digit dispaly and used in repairing mobile phone and laptop. The switch DC power supply adopt special and mini design, small size and light weight, so it is easy to operate. Regulated SMPS adopt full efficient and reliable material. MCH K305D / K305D Mini Digital Adjustable Switching Regulated Adjustable DC Power Supply - Single Channel 30V 3/5A MCH-K305D 0-30V 0-5A Three digit and MCH-K303D 0-30V 0-3A Three digit Features : This mini DC power supply adopt the multi coil high-precision positioner to fine tune the current and voltage, and the ultra high sensitivity is achieved. High quality and good performance, adopt advanced chip technology, intelligent cooling system. And it has longer service life. It is made of rugged metal material,simple and elegant. Both switch DC power supply is portable, small size and light weight, so it is easy to operate. Specifications : Model No. : MCH-K305D MCH-K303D Line Voltage: 110V/220VAC, 50Hz-60Hz Input Current : 0.9A Output Voltage Range: 0-30V Output Current Range: 0-3/5A Voltage Display Accuracy:�±0.5% Current Display Accuracy:�±0.5% Efficiency: >85% Voltage Regulation : Load Regulation(10-100%): 50mV Line Regulation(200-240VAC): 20mV Ripple & Noise(P-P) : 50mV Current Regulation : Load Regulation(10-100%): 20mA Line Regulation(200-240VAC): 20mA Ripple & Noise(p-p): 20mA Others Specifications : Operating Ambient: -10�°C to + 60�°C, 30%RH to 90% RH Size: 7(W) x 16(H) x 22(D) cm Packing Weight: 1.8kg Product display : 1. Materials is full efficient and reliable Military-grade circuit board, advanced patch technology, seckill in-line design. Adopting high-quality components, DC power supply is more efficient 2. Simple design but not simple functions Ultra-simple shape design contains 20 years of rigorous and precise production technology to maximize portability and achieve maximum application with small machines. 3. Metal plastic, Rugged pressure The selection of sturdy and pressure-resistant hardware material body, thickness is about 2mm. The fuselage vents conform to the airflow principle. Reject all counterfeit materials and refurbishment. 4. Super movement, Multiple protection. The small model has a big effect. Compared with the large-volume power supply, it has the same protection function and performance. The performance linear power supply is higher, overload, over-voltage, over-current, current-limit, multiple protection, and be relieved to use. Package includes : 1pcs x DC Power Supply
Description SUNSHINE P-1505TD 5A Intelligent Switching Regulator DC Power Supply Necessary Power Supply for Mobile Phone Maintenance. P-1505TD Power Supply Features Low Ripple And Noise, High Reliability and High Accuracy. Features: The power supply adopts powerful pure copper wire, which has strong conductivity and long service life. What's more, the power supply is designed with high efficiency and low noise. The item features heat dissipation, strong carrying capacity, and porous heat dissipation design. It comes with a range of 0-5V/0-15V, and the current has a 3A/0.5A range, showing the current more finely. The power supply is smaller than a normal 5A power supply, supporting short circuit protection and over current protection, improving product safety.
q series DC power supply 32 point source output module qy81p product specification: transistor source output module output Optocoupler 12-24vdc 20 15% 0.1a/point, 2A /common terminal maximum starting current]0.7A, 10ms or less leakage current at off 0.1mA or less 0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A off on response time 1ms or less on off response time] 1ms or less (rated load, resistive load) Zener diode protection function] activate the overheating protection function in 2-point increments and the overcurrent short-circuit protection function in 1-point increments
The power supply module is a power supply that can be directly mounted on the printed circuit board. It is characterized by providing power supply for integrated circuit (ASIC), digital signal processor (DSP), microprocessor, memory, field programmable gate array (FPGA) and other digital or analog loads. Generally speaking, such modules are called point of load (POL) power supply system or point of use power supply system (pups). Due to the advantages of modular structure, modular power supply is widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields, automotive electronics, aerospace and so on. Q61P is the power module of q series PLC. The power module is a module that provides DC5V power to each module of the programmable controller installed on the base plate. Qy61p parameters: Q61p-a1 input voltage range: AC100 ~ 240V output voltage: DC5V output current: 6A
Product description Single-phase standard power supply is suitable for power department, quality control department, research units, institution of higher learning, electric energy meter, power supply management, load control, power quality, reactive power compensation device and production of the enterprise and so on. It can be as single phase voltage source, current source and power source. Electrical parameters Electrical parameters Accuracy class 0.05%, 0.1% Power supply Single phase AC 85-265V, 50/60 Hz AC Voltage output Range 57.7V / 100 V / 220V / 380V, Switch automatically (max 500V) Adjustment resolution 0.01%, 0.1%, 1%, 10%, AC Voltage output Range 57.7V / 100 V / 220V / 380V, Switch automatically (max Adjustment resolution 0.01%, 0.1%, 1%, 10%, Accuracy 0.05% RG Stability Better than 0.01% RG/1min Distortion degree Better than 0.1% (not capacitive load) Load capacity 40VA Full load regulation rate Less than 0.01% RG Full load regulation time Less than 1ms Temperature drift 8 PPM C Long-term stability 60 PPM/year AC Current output Range Adjustment resolution Accuracy Stability Distortion degree Load capacity Full load regulation rate Full load regulation time Temperature drift Long-term stability 0.1A / 0.25A / 0.5A / 1A / 5A / 10A / 20A / 50A / 100A, Switch automatically 0.01%, 0.1%, 1%, 10%, 0.05% RG Better than 0.01% RG/1min Better than 0.1% (not capacitive load) 40VA Less than 0.01% RG Less than 1mS 8 PPM C 60 PPM/year
The rain-proof power supply has a waterproof level of about IP63. The general output voltage is DC 12V or 24V. It is mainly used for some low-voltage lighting LED products. Such as light strips, hard light bars, etc. Outdoors is a stable environment that is different from indoors. Due to the influence of various weather conditions such as heavy rain and heavy rain, in order for light boxes and LED luminous characters to operate in the rain, outdoor power supplies are required to have basic moisture-proof and waterproof functions. Mingjinfang rainproof power supply is widely used in bridge lighting and stair lighting projects.
The rain-proof power supply has a waterproof level of about IP63. The general output voltage is DC 12V or 24V. It is mainly used for some low-voltage lighting LED products. Such as light strips, hard light bars, etc. Outdoors is a stable environment that is different from indoors. Due to the influence of various weather factors such as heavy rain and heavy rain, in order for light boxes and LED luminous characters to operate in the rain, outdoor power supplies are required to have the most basic moisture-proof and waterproof functions. Mingjinfang rainproof power supply is widely used in bridge lighting and stair lighting projects.
Mingjinfang rainproof power supply is widely used in bridge lighting and stair lighting projects.
