Fuji Electric's UPS and power solutions have the best product specifications with the latest technology. Fuji's products are available in the 72 VA to 2000 kVA range, for single modules. For higher ratings, these can be paralleled to deliver 12000 kVA. Fuji Electric's high efficiency UPS helps in reducing costs, weight, footprint and heat.
Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Product Description We produce VRLA/SLA Battery, lead battery, Industrial Battery, 12V/ 6V Battery, Rechargeable Battery, Gel Battery, Deep Cycle Battery, sealed lead acid battery and so on. 12v 7ah backup battery (20hr battery) Valve regulated lead acid series UPS batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications widely used in the field of UPS, Emergency Lighting System. Battery Structure 1. Container/Cover: Made of UL94HB and LU 94V-0 ABS Plastic 2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing. 3. Separator: Import high quality AGM separator. 4. Postive Plates: PbCa grids minimize corrosion and prolong life. 5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly. 6. Vent Valve: Allows the release of excess gas automatically for safety. Power Supply 12V 7ah UPS Backup Battery (20hr battery)
Mfrs of Led Driver Led Controller SMPS Power Supplies for CCTV Camera Security Systems Switching Power Supplie Battery Charger DCDC Converter Transformer Medical Power Supply Switching AdaptorsSolar Products E Bike Charger Lithium Charger Car Inverter UPS & Inverter Cvt
1, Input: 100 to 240V AC, 50/60Hz 2, Output power: 24W series 3, Output voltage: 3 to 24V DC 4, Output current: 10 to 4,000mA 5, Overload protection 6, Output over voltage protection 7, Short circuit protection 8, High efficiency Mini 75 % 9, DC socket (optional) 10, CEC power supply standard 11, CE approved 12, No Load Power Consumption ¡Ü 0.3 W at Rated Voltage 13, Ripple And Noise: Output voltage 1% 14, High-Voltage test : Primary to secondary: 3 kV 5 mA 60 S 15, Leakage Current : 0.5 mA (max) at input 240Vac 16, Operating Temperature Range 0--40¡æ 17, Storage Temperature Range: -20 --- 85¡æ 18, High Humidity Operation :+ 40 ¡æ and 90 ¡« 95% Humidity 19, Dimension : 74.0mm*41.0mm*47.5mm 20, Net weight: About 170 gram per unit. 21, Color : Black / White 22, The power adapter should have 50,000 hours according to MTBF. 23, Insulation Resistance:Primary to Secondary : 50 Meg. Ohms min. 500VDC. Customized.
Universal Input: 100~240VAC 50~60Hz Protections: Short circuit/ Overload/ Over temperature O/P: High accuracy, low noise; hold up time¡Ý20mS Cooling by free air convection; Auto recovery; Operation temperature: -40¡æ~+70¡æ; 100% full load burn-in test for 8 hours High Efficiency, high reliability; Built-in Class B EMI Filter Long life of 50,000Hours, 2 years warranty Compliance to EN61347-2-13 /IEC61347-2-13 /UL8750.
Input voltage: DC 5/12/24/48V Output voltage options: DC5/9/12/15/24V Output Power: 2W WR power range: 1W-2W. Wide inputvoltage range; Isolation; Regulated output; 1W Isolation voltage: 1500VDC, 3000VDC Efficiency: 80% Working temperature: -40C~ +85C MTBF¡Y 10¡¨¢ 105Hrs In line with RoHS codes Line Regulation(once input change 1%) ¡¨¤0.2% Load regulation(10%-100% full load) ¡¨¤0.5% Ripple and noise (20MHz Band width)
Input voltage: DC24/48/110V Output voltage options: DC5/12/24V Output Power: 50W Size: 61.00 x57.90 x 12.70mm / 2.40x2.28 x0.50 inch HDL series power range: 50-350W. Small size, half brick design Wide input voltage range Typical efficiency 90% Switching frequency: 300KHz Overcurrent /Short circuit protection, Self-furbish Input-output isolate Board in-line type installs Metal case, Low Output Ripple High power density.
Features: Low ripple and low noise High resolution and accuracy (0.1mV/0.01mA) Built-in high-accuracy 5 1/2 voltmeter and milliohmmeter Supporting high-accuracy and dynamic programming output High-luminance VFD screen with two lines& four channels display Intellegent fan system fan will be automatically initiated according to the temperature Supporting remote voltage compensation and multidata storage Supporting external trigger input and output Power-on-self-test, software calibration and standard rack mount Using standard SCPI protocol Communication mode: GPIB/RS232/RS485/USB M8813(0-150V/0-1A/150W)
We are manfactured of power supply in china and the products have ce, ul and saa aslo. 1k, later tell you
Applicable: access control, electric lock Description: Power supply: AC85~264V/50HZ Output:DC5V DC9V DC12V DC24V (optional) Power:40W Efficient:80% Noise:
84Watt 12V-7Amp With Battery Backup Power Supply
24Watt 12V-2Amp Power Supply
60Watt 12V-5Amp With Battery Backup Power Supply
18Watt 12V-1.5Amp Power Supply
36Watt 12V-3Amp Power Supply
60Watt 12V-5Amp Power Supply
84Watt 12V-7Amp Power Supply
Battery power /Accumulator power system/ We are pleased to introduce our new product: Accumulator power system for milk analyzer. The accumulator power system is an autonomous source of supply which provides continuous and smooth work of the milk analyzer for 8 hours. The use of high-class accumulator batteries and electronic elements guarantee continuous work of the device with no need of any additional maintenance.
