S280 3 phase ac power circuit breaker is mainly used for special occasions where two main circuits can not work at the same time. To prevent the simultaneous closing of the circuit breaker, the product can switch the line safely and quickly. It realize the switching between stand-by power supply circuits and other protection functions. Iiâ??s mainly used in the overload protection and short-circuit protection of the circuit which is DC 50Hz/60Hz, 1 pole230v, 2/3/4 poles DC1000V.
Snsx mccb is suitable for the circuit of ac 50/60 hz, rated isolation voltage 750v, rated working voltage up to 690v and rated current up to 630a. The installation height above sea level can not exceed 2000 meters.The breaker can be used at a temperature between -25 to +70 .When the temperature exceeds 40(or for the motor protection it exceeds 65), the capacity must be reduced for the equipment. It can withstand the impact from humid air, salt fog, oil mist and mildew fog. It should be installed in the medium without explosive hazard or non conductive dust, and the media is not strong enough to corrode the metal or destroy the insulation.It complies with the international standards of iec 60947-1.-2.-3.-4-5.1 Port:ningbo, shanghai Place of origin:zhejiang, china (mainland) Brand name:safesave Model number:snsx-250 Type:moulded case Poles number:1p, 2p, 3p, 4p Color:black Current:100-250 Certification:ccc/ce Rated voltage:690v Rated frequency:50/60 Standard:iec947-1, -2, -4, -5.1 Mechanical life:10000 times Packaging details: Standard export packing or according to the customer's requirements Delivery detail:within 20days
Specifications Condition New Power Source Electric Features Durable, Easy To Fir, High Performance, Stable Performance, Water Proof Warranty 3years Applications Industrial Puncture Voltage 100-200V, 300-400V, 500-600V, 700-800V MOCB, ACB, SF6 CB, Vacuum CB, High Voltage Circuit Breakers
Miniature Circuit Breakers 1) BK series. - BKN : 1 to 4pole up to 63A & 6kA (IEC60898-1) -BKN-b: 1 to 4pole up to 63A 10kA (IEC60898-1) - BKH : 1 to 4pole from 63 to 125A 10kA (IEC60947-2) 2) BF series - 6~50A Max 2.5kA at 415VAC (IEC60947-2) 3) BS series - 6~30A, 1.5kA at 110/220VAC 4) Certifications: CE, KEMA, SEMKO, CQC/CCC, SABS, SASO, GOST, UL1077, SNI
SIWOW Intelligent Universal Circuit Breakers: Product description : Product General SIWOW1 universal circuit breakers (hereinafter referred to as circuit breakers) are applicable for the distribution network of AC50HZ, with rated operation voltage of 400V, 690V, and rated operating current 6,300A and below, for distributing electric energy and protecting the circuit and power supply equipment from overload, undervoltage, short circuit, ground connection and other damages. The circuit breakers, adopting intelligent controller with precise selective protection and multi-functions, have complete protection functions and are especially suitable for power distribution network which needs to improve power supply reliability and avoid unnecessary power failure. Of which, the PT40-2H/PT40-3H intelligent controller, with communication interface, is convenient to be connected to the field bus and can realize remote functions of "remote measurement", "remote adjustment", "remote control", and "remote communication", so as to meet the requirements of automated control. To configure leakage mutual inductor and the matched intelligent controller can also realize electric leakage protection. The impulse withstand voltage of circuit breakers at an altitude of 2000m can reach 8kV (to correct of the same altitude according to the standard, 12kV at most). The circuit breakers of 1,000A or below (rated operating current) can protect the motor from overload, short circuit , under voltage and ground fault in the network of AC50Hz and 400 V, and can use for infrequent starting of the motor under normal Operating environment Ambient air temperature should be not higher than +40, and the average temperature within 24h should be not higher than +35. The lower limit of ambient air temperature is -5. Note: For using under ambient air temperature of higher than +40 or lower than -5, users should negotiate with the manufacturer. The altitude of installation site should be not higher than 2,000 m. When the maximum temperature is +40, the relative humidity of air should be not higher than 50%, and a higher relative humidity is allowed at a lower temperature. For instance, it can reach 90% at 20. Special measures should be taken to cope with the condensation due to temperature change occasionally. The pollution degree is Level 3. The circuit breakers are installed in the cabinet with door frame. The protection class can reach IP40. Use class is B The installation class of main circuit of circuit breakers, undervoltage trip coils, and the primary coil of power transformer is IV; and the installation class of the rest of the auxiliary circuits and control circuits is III. The vertical angle of installation should be not more than 5°. Transportation and storage condition: -25- +55, up to +70 in a short period of time (within 24 h). Product origin : Shenyang Key Specifications/Special Features : SIWOW-630A~6300A/4
Susol MCCB Series: TE, TD, TS AF: 100AF, 160AF, 250AF, 400AF, 600AF, 800AF, 1000AF, 1250AF, 1600AF Pole: 2P, 3P, 4P Trip unit Thermal magnetic trip unit: FTU, FMU, ATU, MTU Electronic trip unit: ETS, ETM, OCR Standards: IEC 60947-2 CB, GB 14048.2 CCC
Rated Current: 3~1200A Breaking capacity (Icu): 10~85kA Metasol MCCB:- Series : AB AF : 30AF, 50AF, 60AF, 100AF, 125AF, 250AF, 400AF, 600AF, 800AF, 1200AF Pole: 2P, 3P, 4P standards : IEC 60947-1, IEC 60947-2 CB GB 14048.2 CCC
SIWOM1 Series MCCB: Product description : Product General SIWOM1 moulded case circuit-breakers (hereinafter referred to as circuit-breakers) use thermomagnetic tripper and they are developed and manufactured by the Company with the latest circuit-breaker technology. The circuit-breakers are featured by good-looking appearance, compact structure, long service Iife, low rated power consumption, stable performance, easy installation and superior performance, and they provide users with safe and reliable Protection. The circuit breaks has disconnecting function Indication of 0 and OFF positions is provided, and when the contact is open, the handle points at 0 and OFF positions; The position of rotary handle or operating mechanism is consistent with the noumenon , which does not affect reliability of the circuit-breakers Reverse incoming line is not allowed for the circuit-breakers, and only Pole 1, 3 and 5 are allowed to connect with the power supply line and Pole 2, 4 and 6 with the load line The circuit-breakers may be installed vertically (i.e., vertical installation) or horizontally (i.e., horizontal installation). Current limiting capability is provided; the whole series are designed to have a current limiting acting mechanism that extinguishes the electric arc before the expected short-circuit current reaches its peak to suppress the impact of short-circuit current on the circuit. The actual and expected breaking short-circuit current peaks of current limiting acting mechanism. Main features of SIWOM 1 circuit-breakers 1 The circuit-breakers have merits of multiple protection functions (overload, short circuit, under voltage protection, etc.), adjustable action value, strong breaking capability, easy operation, safety, etc., therefore they are widely used now; 2 The circuit-breakers may be used to connect and disconnect load circuit or control motors that do not start frequently. Their functions are similar to total functions of some or all of the electric equipment such as knife switch, overcurrent relay, under voltage relay, thermal relay, leakage protector, etc., and they are important protective devices in the low-voltage power distribution network: 3 The circuit-breakers are internally more sophisticated, but relatively simple in principle. They connect with inductor between the incoming and outgoing lines. When the current exceeds the rated value, the coil drives the iron core to provide protection; 4 After the main contact of the circuit-breakers is manually or electrically closed, the free tripping mechanism locks the main contact at the closing position. Coil of overcurrent tripper and thermal element of thermal tripper are connected with the main circuit in series and coil of under voltage tripper is connected with the power supply in parallel. Product origin : Shenyang Key Specifications/Special Features : SIWOM1-10A~800A/4300
SIWOB Series RCCB: Product description : SIWOB2L miniature circuit-breakers with residual current protection Product origin : Shenyang Key Specifications/Special Features : SIWOB2L-6A~63A/4C
SIWOB Series MCB: Product description : SIWOB series MCB Scope of application They are applicable to the circuit with rated voltage of up to 400V and rated current of up to 125A to provide overcurrent protection for line facilities and electrical equipment in the buildings and similar places or for infrequent make-break operation Work environment in use and installation conditions Work environment in use and installation conditions The altitude of installation site shouId not be more than 2,000m; The ambient air temperature is -5 - +40, and the average temperature within 24h shouId be not higher than +35, When the maximum temperature is +40, the air relative humidity is not higher than 50%, and a higher relative humidity can be tolerable at relatively low temperature for examplethe relative humidity is 90% at +20; Pollution degree 2 (i.e.There is non-conductive pollution under normal circumstances , but transient conductivity is taken into consideration due to accidental condensation), Vertical installation, error is ±5° Terminal electrical equipment is installed on TH35-7 mounting rails Product origin : Shenyang Key Specifications/Special Features : SIWOB-1A~125A/4P C
SIWOM1L Series ELCB: Product description : SIWOM1 L moulded case circuit-breakers with residual current protection (hereinafter referred to as circuit-breakers) use thermomagnetic tripper and they are developed and manufactured by the Company with the latest circuit-breaker technology. The circuit-breakers are featured by good-looking appearance, compact structure, long service Iife, low rated power consumption, stable performance, easy installation and superior performance, and they provide users with safe and reliable Protection. The circuit breaks has disconnecting function Indication of 0 and OFF positions is provided, and when the contact is open, the handle points at 0 and OFF positions; The position of rotary handle or operating mechanism is consistent with the noumenon , which does not affect reliability of the circuit-breakers Reverse incoming line is not allowed for the circuit-breakers, and only Pole 1, 3 and 5 are allowed to connect with the power supply line and Pole 2, 4 and 6 with the load line The circuit-breakers may be installed vertically (i.e., vertical installation) or horizontally (i.e., horizontal installation). Current limiting capability is provided; the whole series are designed to have a current limiting acting mechanism that extinguishes the electric arc before the expected short-circuit current reaches its peak to suppress the impact of short-circuit current on the circuit. The actual and expected breaking short-circuit current peaks of current limiting acting mechanism. Main features of SIWOM1L circuit-breakers 1 SIWOM1L moulded case circuit-breakers with residual current protection (hereinafter referred to as leakage circuit-breakers) provide ground fault protection. The power supply sampling for leakage protection module of conventional residual current protective circuit-breakers is two-phase and those for this series of leakage circuit-breakers is three-phase. In case of loss of any phase, the leakage protection module of circuit-breakers still works normally, 2 Adjustable at the site: The rated residual action current lrn and residual current action time (non-delay and delay) is adjustable according to the actual situation at the site; 3 Low-voltage protection: When the phase voltage is reduced to 50V, the leakage protection module still works normally; 4 Leakage alarm output function: When the residual current of a device or line reaches or exceeds the set point, the circuit-breakers with leakage alarm unit module outputs a passive contact signal to drive the corresponding alarm device, The circuit-breaker is featured by small volume, strong breaking capability, short flashover,anti-vibration. etc Product origin : Shenyang Key Specifications/Special Features :SIWOM1L-16A~630A/4300
- Complete ranges up to 100A and high breaking capacities up to 100kA at 415VAC - Most efficient through various functions and compact design in specifications Features Width: 45mm for 32A, 55mm for 63A and 70mm for 100A Three-position operator: ON-OFF-TRIP Complete range of common accessories Handle lock in the OFF position Class 10, 20 overload trip characteristics Trip test available Finger safe terminal DIN rail & screw mounting Certification KEMA CB type certificate EC-Declaration of conformity UL listed CSA certified CCC
Circuit breakers ( miniature circuit breakers- MCB MCCB), modular cubicle / distribution boards, Automatic transfer switch, Ats, Insulated load break switch for distribution.12kv, 24kv, 36kv.5. Power plants/renewable energy plants.
Circuit breaker The circuit breaker mainly serves for protecting the circuits of ac 50 hz, 230vof single pole, 230v/400v of two poles and 400v of three or four poles from overload or short-circuit, and also for unfrequent making and breaking electrical apparatus and lighting circuit. Packed in export cartons
Standard rating: 1-20 ampere. Input power: 12 VDC /125 VAC / 250 VAC. Dielectric strength: 1500 VAC / 1 minute. Reset: manual push reset. Approvals: CSA, VDE, CSA C/US.
Terasaki, , square d, siemens, merlin gerin, qo, areva, sylvania, westinghouse, ge, murray, moeller, federal, schneider, zinsco, eta, cutler hammer, airpax, heinemann, klixon, hager. Miniature circuit breaker, air circuit breaker, electric circuit breaker, earth leakage circuit breaker, thermal magnetic circuit breaker, low voltage circuit breaker, molded case circuit breaker, vacuum circuit breaker, standard circuit breaker
Mini circuit breaker is suitable for wires of AC 50Hz, rated voltage of 400V,rated current of 32A(63A)D, with some protection functions such as leakage because of getting an electric shock, overload, short circuit, etc., and it can add over-voltage protection function according to users’ requirements. It mainly used in building lighting and protection of power distribution system. This product accords with IEC61009 and GB16917.1 standard.
DZ47-63 Series High Breaking Capacity Mini Breaker may be used in such occasions with AC 50 or 60Hz, rated working voltage of 415V or below and rated working current of 63A.It can servefor the illumination of office, residential housing and similar buildings and its distribution wires and protect the distribution circuit and equipment against overload and short-circuit.It can also be used for infrequent conversion of circuit under normal conditions. Rated current:1A, 3A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 50A, 63A Number of poles:1p, 2p, 3p, 4p Working voltage:From 240V to 415V DZ47LE Series Leakage Circuit Breaker may be used in the circuit with AC 50 or 60Hz, rated voltage of 230V or 400V and rated current of 63A or below. It can prevent personnel from electric shock, protect equipment against leakage and the circuit against overload and short-circuit It can also serve as infrequent conversion of circuit and infrequent startup operation of motor under normal conditions. Number of poles: 1p+n, 2p, 3p, 3p+n, 4p, Working voltage: 240V, 380/400V, 240V, 240/415V Rated current: 1A, 3A, 6A, 10A, 20A, 25A, 32A, 40A, 50A, 63A DZ20 series Moulded Case Circuit Breaker (hereafter refers to as circuit breaker) to be suitable to exchanges 50HZ. The nominal current from 16A to 1250A, fixed insulation voltage 660V, fixed working voltage 380V (400V) and in the below electric circuit makes the infrequent transformation and the electric motor infrequent starting using of. The circuit breaker has the overload, short-circuits and owes the voltage protective device, can protect the line and the power equipment is not damaged. This circuit breaker may be vertical the installment (namely vertical stroke to install), also may the level installment (namely horizontal attire). This circuit breaker carries out the standard: GB14048. 2 and IEC60947-2. Product model: Dz20-100, dz20-225, dz20-400, dz20-630, dz20-800, dz20-1250 Rated current: From 16A to 1250A Rated working voltage: 380V DZ30LE-32 Leakage Protector may be used in single-phase domicile circuit with AC 50 Hz or 60Hz, rated voltage of 220 V and rated current of 32 A. It can prevent personnel from electric shock, and protect vivil electric lines against overload and short-circuit. This product is of such characteristics as small volume, high breaking capacity and cutting off the live and zero lines at the same time. Rated current: 3A, 6A, 10A, 16A, 20A, 25A, 32A Number of poles: 1p+n Working voltage: 220V