Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout. Payment term - LC For Price and specification please contact us.
ORIGIN : TURKEY/VIETNAM PACKING : In 50 Kg Bags/BULK. SPECIFICATIONS: CEMENT - 42.5 R : Chemical Composition SILICON DIOXIDE (SIO2) 21.00 ALUMINIUM OXIDE (A12O3) 5.30 FERRIC OXIDE (FE2O3) 3.30 CALCIUM OXIDE (CAO) 65.60 MAGNESIUM OXIDE (MGO) 1.10 SULPHUR TRIOXIDE (SO3) 2.70 LOSS OF IGNITION (LOI) 0.90 TRICALCIUM SILICATE (C3S) 60.00 DICALCIUM SILICATE (C2S) 15.00 TRICALCIUM ALUMINATE (C3A) 8.05 TRICALCIUM ALUMINO FERRICE (C4AF) 9.76 CEMENT - 42.5 R : Physical and Mechanical Properties BLAIN CM2/GR 3.250 AUTOCLAVE EXPANTION 0.02 INITIAL SETTING TIME (VICAT) 105 MINUTES FINAL SETTING TIME (VICAT) 135 MINUTES @ 03 DAY'S 230 KG/CM2 @ 07 DAY 39 S 305 KG/CM2 COMPRESSIVE STRENGTH @ 28 DAY 39 S 420 KG/CM2 QUANTITY PRICE: SPOT CONTRACTS: 12,500 MT Ã¢?? USD 105.00/pmt 25,000 MT USD 104.00/pmt 50,000 MT USD 102.00/pmt 100,000 MT USD 100.00/pmt ANNUAL CONTRACTS: 150,000 MT USD 98.00/pmt 300,000 MT USD 95.00/pmt SMALL QUANTITES 500 MTS -8000 MTS @ FOB US$65.00 PMT VIETNAM/IRAN PORTS. ABOVE PRICES ARE MAJOR SEAPORTS AND NOT ISLAND PORTS. DESTINATION DELIVERY: Destination: CIF ASWP. Shipment: First Shipment in 30-45 Days and Rest in Every 30 Days after Receipt of Payment Instrument to the Sellers Bank. PAYMENT: By Irrevocable, Transferable Confirmed DLC 100% Payment at Sight for total Quantity from Top Western Prime Bank. INSPECTION: S.G.S Inspection for Quality and Quantity Service at Sellers Cost at Place of Loading. PROCEDURES: 1) Buyer issues a LOI + 2) Seller issues FCO 3) Buyer sign seal and return the FCO 4) Seller issues Draft Contract 5) Buyer sign, seal and return the Contract, seller sign the contract and return to the Buyer 6) Buyer Bank sends a DLC to the sellerÃ¢??s Bank 7) Shipment Starts.
The bridge international company , a distribution company based in Tunisia . we can prpvide you with white cement CEM I 52.5N and CEM II/A-L 42.5N in 25 kg and 50 kg bags for the CEM II/A-L 42.5N and 25kg bags for CEM I 52.5N . our products are certified and in compliance international european and US standards .
Portland (constructional) Cement is a fine powder mixture of various minerals. It is produced by mixing calcareous minerals such as chalk, limestone containing silica and alumina and heating it to 1450 deg C when it cools a clinker is formed. This clinker is then finely ground and mixed with small quantity 3-5% of gypsum which has calcium sulphate in it. The amount of gypsum controls the physical properties of the eventual concrete. Sometimes very minute quantities of pigments are also added. Cement producing processes do however vary. TYPES OF PORTLAND CEMENT: - OPC Ordinary Portland Cement - Rapid Hardening Portland Cement - Sulphate Resisting Portland Cement - Low Heat Portland Cement - White Portland Cement PACKING: - 50 Bags (Paper or Poly bags) - 1.5 tonne bags - 2 tonne bags - Bulk/Loose
Supplied in 2 Variants : PCB 40 White in 50 kg bag and PCB 50 Grey in 750 kg Jumbo Sling bag. Equivalent Standard : BS EN 197-1: 2000 42.5R and ASTM C150 Type 1.
Our products are all in accordance with strict quality control procedures to ensure optimum product performance and uniformity. However, there are many variables that affect concrete performance that are beyond the control of our engineers. Skilled persons should use these products with special attention given to formwork, batching, mixing, placing, finishing and curing. In most applications, quality aggregates, admixtures and additives should be utilized. Setting Time (Initial) Ã¢?Â¥ 60 min Soundness (Expansion) Ã¢?Â¤ 10 mm Compressive Strength 2D Ã¢?Â¥ 10 MPa Compressive Strength 7D Ã¢?Â¥ 10 MPa Compressive Strength 28D Ã¢?Â¥ 42.5 MPa Loss on lgnition Ã¢?Â¤ 5.0% Insoluble Residue Ã¢?Â¤ 5.0% Sulphate (SO3) Ã¢?Â¤ 3.5% Chloride Content (Cl) Ã¢?Â¤ 0.10%
Chemical analysis: Items/ Indexes National Standard Internal controlled indexes Cement MgO (%) 5.0 3.80 Cement SO 3 (%) 3.5 2.30 Cement loss on ignition (%) 5.0 2.01 Cement fineness (%) 10.0 1.00 Setting time (min) 45 190 Final setting time 600 245 Strength(MPa) 3-day compressive strength 24.0 25.30 3-day bending strength 4.0 5.1 28-day bending strength 6.5 7.2 28-day compressive strength 42.5 47.5
High-quality Portland cement Type: I-42.5, I-52.5, II are available. Origin: Iran FOB: any port of Iran Packing: 25x KG - 50 x KG Bags, 1xTON Jumbo Bag, Bags in Jumbo, Bulk Packing
Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout. It was developed from other types of hydraulic lime in England in the mid 19th century, and usually originates from limestone Origins : nigeria,china ,iran ,ghana, italy, india
- Portland Cement Type I & II: For general purpose usage - Portland Pozzolanic Cement: For general applications and dam construction - Portland Cement Type V ( 5 ): For Sea concrete structures such as waterfronts, bridge piers, etc. - Portland Cement I-425: Used in concrete blocks, columns and foundations where require high pressure.
Portland cement is the most common type of cement in general use around the world as a basic ingredient of concrete, mortar, stucco, and non-specialty grout. It was developed from other types of hydraulic lime in England in the mid 19th century, and usually originates from limestone Origins: Iran,pakistan,malaysia,portland
White cement is a hydraulic binder produced for decorative purposes by grinding white clinker, which is obtained from a mixture of special-quality clay (pyrophyllite, kaolinite) and limestone, with gypsum. It is a type of cement used in binding of elements such as tiles, ceramics in luxurious architectural structures. It is one of the products with the highest strength and whiteness in the market. This product is for buildings that require high strength, for general use and structures with aesthetic purposes. Its basic distinctive properties are high strength gain, aesthetic and decorative features, smooth surface and elegant appearance. It has a minimum whiteness rate of 85%. It has a stable shade in addition to its high level of whiteness, which provides a great advantage in the production of building elements. It can be used in colored concrete and mortar. Thanks to its high level of whiteness and fine structure, it is used in the production of building chemicals.