Good heat insulation performance Non-combustible, fire retardant is added to our polyurethane Flexible Tear Resistance Technical support from Italy Environmentally friendly
3D Leather Wall Panel Machine 3D wall machine Machine parameters Power:KW Pressure57Kg/CM2 Working radius150CM Injection rate1050g/s Quantitative memory:0 group Voltage:20V Dimensions1300*560*1500mm Machine characteristics Specification 1. All Stainless Steel Design 2. Mixed mode combination: static mixing / dynamic mixing. 3. Microcomputer metering processor. 4. Didactic learning and memory quantification.20 set quantitative memory. 5. Spit gum rate can be easily changed. 6. The barrel can be heated and stirred. An external vacuum pump. 7. Tank display the lower level. 8. The pipeline PTC sensor with heating constant-Temperature function 9. The pipeline 24-hour automatic timer / quantitative cycle [Technology of anti-sediment].
Product description One component polyurethane joint sealant is a durable elasticity moisture curing polyurethane polymer based road joint filling material. It is widely applied in filling road joints for the excellent properties and easy application Typical applications 1.Suitable for sealing and filling the expansion joints and settlement joints of airport runways, highways, building roofs, underground parking, storage yards, industrial floors, driveways, loading docks and basement. 2. Cracks maintenance for highways, plaza, roofs, bridges and epoxy floors etc. Key features 1.One component, easy to application, free solvent, non-toxic and odorless after curing, environment-friendly 2.Self-leveling, excellent flowability, easy to raked joint operation 3.Durable flexibility, no crack, excellent sealing and waterproofing properties 4. High movement, no cracking, no falling off, suitable for sealing jonts for all kind of concrete road 5. The new and used sealant have good compatibility, easy to repair 6.Excellent resistance to water, oil, acid, alkali and puncture Technical data table Property standard/unitsvalue Product item ----- pu820 , Appearancevisual inspectiongray, homogeneous paste , Density g/m3 1.35â±0.1 Flow ability mmself-leveling , Solid content %98 , Surface dry timehour â?¤4 , Tack free time hour 6~16 , Fully cured timehour 24
SEPNA PU110 is one component self leveling polyurethane based coating that cures by reaction with atmospheric moisture to form a seamless but flexible waterproofing membrane. Typical Applications 1.Waterproofing and damp proofing for horizontal surface of basement, kitchen, bathroom, underground tunnel, deep wells structure and normal home decoration 2.Leak-proofing and penetrating-proofing of reservoirs, water towers, swimming-pool, for Bath-pool, fountain pool, impounding reservoir, sewage cleaning pool and irrigation channel 3.Corrosion-proofing and penetrating-proofing of water tanks and underground Pipeline 4. Bonding and moisture-proofing of various floor tiles, marble, asbestos board and so on Key Features 1.100% Pure polyurethane based eco-friendly coating 2.Contain no asphalt, tar or any solvents, no harm to construction personnel 3.Free from pollution to the environment, no toxicity after curing, no corrosion to base material, high solid content 4.One component, convenient to construction, no need of mixing, unused products should be kept in good sealing package 5.High efficiency: high strength and elasticity, resistant to acid and alkali, excellent bonding effect with concrete, tile and other substrates 6.Cost-effective: the coating expands a little after curing, which means coat thickness adding after cured
Introduction: Homey p35 polyurethane sealant for construction, is one-part room temperature moisture Curing polyurethane with high adhesion strength, aging resistant, vibration exhaustion resistant, Low, temperature resistant and free-corrosive properties, is excellent where gap filling requirements are needed. Typical uses: , precast panel, wood, aluminium , pvc joinery seams , curtain wall, bakes clay and concrete roof tiles Cas no.:, 9009-54-5 Other names:, pu adhesive sealant Mf:, mixture Einecs no.:, 230-391-5 Place of origin:, china(mainland) Classification:, other adhesives Main raw material:, polyurethane Usage:, construction, woodworking, other Brand name:, homey Model number:, p35 Type:, polyurethane sealant Component:, one component Hs code:, 3506100010 Curing system:, moisture Volume:, 310ml Color:, white, grey, black Performance:, low temperature resistant, vibration ehaustion, anti-aging Oem:, available Price:, negotiable Shelf life:, 9months Storage:, store at 25, , or below Packaging details:, 310ml;24pcs/ctn 20' container 24pcs/ctn, 2000 cartons without pallet, 1440 with pallet
Polyurethane coating machine can do 2-d and 3-d workpieces. We provide customers sealing solutions.
Type: Driving wheel, loading wheel, training wheel. Material: Polyurethane Wheel Dia: 0~500mm Tread Width: 0~200mm Axle Hole Dia: 0~200mm Loading Capacity: 0~2000kgs Unit price: $5.00~$70.00 (exw) Export port: ningbo, shanghai. Payment term: TT, LC ect. We are manufacturer. If there are any questions please do not hesitate to contact me for the further details.
Type: Driving wheel, loading wheel, training wheel. Material: Polyurethane Wheel Dia: 0~500mm Tread Width: 0~200mm Axle Hole Dia: 0~200mm Loading Capacity: 0~2000kgs Unit price: $5.00~$70.00 (exw) Export port: ningbo, shanghai. Payment term: TT, LC ect. We are manufacturer. If there are any questions please do not hesitate to contact me for the further details.
Name:water based polyurethane waterproof coating One barrel is 20kgs, can be customized. Color can be customized. z
My name is Rita,from Sepna advanced Material Co.Ltd. We are one china factory focus on polyurehthane waterproof coating for basement, kitchen, bathroom, underground tunnel, deep wells structure and normal home decoration. We want to found one high quality customer to develop your market. We can provide you with free sample. PU110 is one component polyurethane coat film with high durable elasticity designed for application on substrates ,which is chemical reaction with moisture in the air to form a soft and seamless sealing film. Key Features 1. Pure polyurethane sealant, environment-friendly 2. Contains no asphalt, tar or any solvents, no harm to construction personnel 3. Free from pollution to the environment, no toxicity after curing, no corrosion to base material, high solid content 4. One component, convenient for construction, no need of mixing, surplus products should be kept in good airproof package 5. Efficient: high strength and elasticity, resistant to acid and alkali, excellent bonding effect with concrete, tile and other substrates 6. Cost-effective: the coating expands a little after curing, which means it turns a little bit thicker after cured 7. All items tested exceeds national standard GB/T19250-2003 Typical Applications 1. Waterproofing for basement, kitchen, bathroom, underground tunnel, deep wells structure and normal home decoration 2. Leak-proofing and penetrating-proofing of reservoirs, water towers, swimming-pool, for Bath-pool, fountain pool, impounding reservoir, sewage cleaning pool and irrigation channel 3. Used for preventing of leaking, corrosion and penetrating for water tanks, underground Pipeline 4. Bonding and moisture-proofing of various floor tiles, marble, asbestos board and so on z
1- liquid resin with polyurethane and acrylic 2- colorness and clear, one component, do not match any catalyst before fill 3- curing under sunshine or uv lamps 4- certificates: en 356 p3a p7b, en 12543-4, en 12600, en 1063 br6, sgs and msds 5- application: flat laminated glass, curved laminated glass, decorate glass, digital smart glass. 6- self-life: 18 month 7- sample: 2kg/pail 8- standard: 25kg/pail, 200kg/drum 9- payment: tt, lc, dp, western union, swift -
1- liquid resin with polyurethane and acrylic 2- colorness and clear, one component, do not match any catalyst before fill 3- curing under sunshine or uv lamps 4- certificates: en 356 p3a p7b, en 12543-4, en 12600, en 1063 br6, sgs and msds 5- application: flat laminated glass, curved laminated glass, decorate glass, digital smart glass. 6- self-life: 18 month 7- sample: 2kg/pail 8- standard: 25kg/pail, 200kg/drum 9- payment: tt, lc, dp, western union, swift -
Description Two-component acrylic aromatic polyurethane finish coating Recommended Use :- This product is a topcoat along with recommended undercoats for use in chemical plants, fertilizer plants, petrochemical and pharmaceutical complex, power plants, cement plants, steel plants, heavy chemicals and off-shore and on-shore industries. It is recommended for very high chemical resistance and for areas not exposed to direct sunlight. Product is also recommended for application over suitable primer for OEM industry. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 ± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lt at recommended DFT of 30 µ FLASH POINT : Base : Above 23 C Hardener : Above 23 C DRYING CHARACTERISTICS (At 30�° C and 65% Relative humidity) : SURFACE DRY : 30 minutes max HARD DRY : Overnight FULL CURE : 7 DAYS. SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation The surface of primer or intermediate coats, over which this product is applied as topcoat, should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Description Two component air drying aromatic polyurethane finish coating Recommended Use :- It is recommended as topcoat for Original Equipment Machines, Hygienic, Maintenance painting where mild chemical resistance along with good abrasion resistance and decorative finish are required. Sometimes it is recommended as undercoat of finish coats application for economic benefits. Physical Data COLOUR : Assorted shades FINISH : Glossy / Semi glossy / Matt SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / lit at recommended DFT of 30 FLASH POINT : Base : Above 23C Hardener : Above 30C DRYING CHARACTERISTICS : SURFACE DRY :20 - 30 minutes (At 30C and 65% Relative humidity) HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a Topcoat, which is applied over underneath primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged coatings should be roughened by emery paper grade 400 / 600 followed by solvent wipe for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional spray / By Airless Spray THINNER : Type 290 POT LIFE : 3 hours min at 30 C RECOMMENDED DFT : 30-40 OVERCOATING INTERVAL : MIN : 8 hours MAX :24 hours COMPATIBILITY : Can be applied over Epoxy and Polyurethane primers, intermediate coats and topcoats.
Urethane Cast Molding Factory Custom Molded Rubber Silicone Pu Polyurethane Urethane Parts Place of Origin: Beijing, China Brand Name: Zhongde Model Number: OEM Processing Service: Moulding, Cast Molding Item: High Quality Factory Customized molded polyurethane parts Material: EPDM,Silicone,FKM,NBR,SBR,Sponge Rubber... Size: As per customer's requirements Color: Black,white,red,green,transparent or any color Technology: Hot pressing molding ,injection molding or extrusion Hardness: ShoreA Working temperature: -60~350 Density: 1.0-2.0g/cm3 Drawing Format: DWG/DXF/IGS/STEP/X-T and PDF Service: OEM or ODM Urethane Cast Molding Factory Custom Molded Rubber Silicone Pu Polyurethane Urethane Parts Material Plastic, Rubber, Thermoplastic Elastomer(TPE), Metal and other Hybrid materials as per request Color Black, white, red, green, transparent or any color according to Pantone code Size As per customer's requirements Technology Injection molding, CNC machining, Compression Molding, Cast Molding, Metal Stamping Surface Treatment Powder coating, Zinc coating, Galvanization, Electro-deposition coating, Chrome/zinc/nickel plating, Polishing, Silkscreen, Black oxide Application Automotive, ATV, Mechanical equipment, Construction, Home appliance, Aviation, Office facilities, Agriculture, etc. Shippment We have longterm cooperation with internation shipping agent and express company, so that shipping safty and arriving time are secured
Customized Colorful Molded Urethane Bush Hdpe Pu Bushings Polyurethane Bushing Applicable Industries: Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Farms, Home Use, Retail, Printing Shops, Construction works , Energy & Mining, Advertising Company Place of Origin: Beijing, China Brand Name: Zhongde Model Number: OEM Type: FLANGED Material: pu, Nylon ,mc nylon, POM,ABS,PU,PP,PE,PTFE,UHMWPE,HDPE,LDPE, PVC,etc. Item: custom polyurethane bushings Color: Black,white,red,green or any color according to Pantone colors Size: As per customer's request Processing Technic: CNC machining,injection molding & extrusion Hardness: Shore D Working temperature: -60~350 Tolerance: 0.05mm Density: 0.9-2.5g/cm3 Drawing Format: DWG/DXF/IGS/STEP/X-T and PDF Material Nylon ,mc nylon, POM,ABS,PU,PP,PE,PTFE,UHMWPE,HDPE,LDPE, PVC,etc. Color Black, white, red, green, transparent or any color according to Pantone code Size As per customer's requirements Technology Injection molding, CNC machining, Extrusion,vacuum forming,Compression molding,Over molding&insert molding Surface Treatment Powder coating, Zinc coating, Galvanization, Electro-deposition coating, Chrome/zinc/nickel plating, Polishing, Silkscreen, Black oxide Application Automotive, ATV, Mechanical equipment, Construction, Home appliance, Aviation, Office facilities, Agriculture, etc. Biggest Part Size 1500*1500*1000mm Tolerance 0.01mm--0.001mm Drawing Format STEP/STP/IGS/STL/CAD/PDF/DWG and Other
Model Number: OEM Processing Service: Moulding, Cast Molding Item: High Quality Factory Customized molded polyurethane parts Material: EPDM,Silicone,FKM,NBR,SBR,Sponge Rubber... Size: As per customer's requirements Color: Black,white,red,green,transparent or any color Technology: Hot pressing molding ,injection molding or extrusion Hardness: ShoreA Working temperature: -60~350 Density: 1.0-2.0g/cm3 Drawing Format: DWG/DXF/IGS/STEP/X-T and PDF Service: OEM or ODM
Wholesale Colorless Rubber Crumb Polyurethane Adhesive glue Waterproof Rubber Binder, Mix with EPDM or SBR rubber granules, to install running track, playground, sport courts, jogging track, park, etc. 20kg/bucket, 960kg/pallet, 19.2ton/20ft container 200kg/drum, 16ton/20ft container
We offer quality polyurethane spare parts for heavy equipment, to the world, the best price and product
Polyurethane Timing Belt Price Range:$ 109-139 Minimum Order Quantity: 10 square meters Processing Cycle: 3 days for finished products, 15 days for customization Delivery Method: nationwide logistics distribution, door-to-door delivery. Delivery Time: 3-20 days Polyurethane timing belt is made of thermoplastic Polyurethane material, which has high wear resistance. Various types of steel wire cores ensure that they still maintain good movement ability in transmission and have small production tolerance. PU synchronous belt has reliable transmission and dimensional stability. In the production process, a layer of nylon is added on the tooth surface and the back of the domain tooth to ensure that the particularity of operation in special applications remains the same, and a layer of polyurethane can be added on the back of the belt to prevent corrosion or high load. Polyurethane timing belt is widely used in security, glass ceramics, building materials wood industry, metal plastic, printing screen printing, packaging and textile, food and beverage, instruments and meters, wire and cable, electronic appliances, automobiles, sports and other industries of industrial mechanical equipment transmission Stone, ceramics, glass, electronics, aluminum, textile, logistics, printing, packaging, paper products processing And other industries
