1.Main features: They are high reliable and practical, solid and high degree of automation, heavy load ability.Raising the working efficiency, the power and burner match rationally, it obtain the best effect. 2.Make up for equipment: An oven, two cooling chamber, two arms and two working stations, A combined electrical control system Two small combined electrical control system 3. Characteristic A solid ratchet device is used to control the direction of rotation, which is activated by an electrical motor that regulates the ratio of rotational speed and acceleration. Each arm can be approached to time and temperature settings respectively.There is a movable operation panel at loading and discharging station. Bundle
Plastic mixer high speed shr series 1.High speed mixer heat mixer 2.Pneumatic discharge 3.Automatic 4.Material: stainless steel 5.Volume:10-1000l Wood tray
Pvc pipe making machine 1.Pipe diameter:16-630mm 2.Twin screw extruder 3.Vacuum shaping machine 4.Caterpillar drawer and planetary cutter. Wood tray
1.Sj30 sj45 sj55 sj65 sj75 sj90 sj100 sj120 sj150 2.L/d: 25 28 30 33 3.Output:10-1000kg/h Standard wood case
The complete extrusion line is developed with the 1990s advanced technology of west europe by our company. The main machine is single screw extruder with cossponding downstream equipment. The main technique parameter Wooden pallet and fixed in container
High quality abs car roof box Material: abs Size:1200*700*340(l*w*h) Color: gray or black. Brown carton
We have many different design of barrel to meet customer's demand. Gradual type, mutant type, wave type, barrier type, double screen type, shunt type, separation type etc., it is suit for PA, PP, PC, PE, ABS, AS, PS, PVC, PMMA, LCP, PBT, PPC, PPS, PAR, PO, magnetic powder, ceramic powder, aluminum powder, iron powder, wood flour And other engineering plastics, pe/pp wpc pelleting. Standard wooden box.
Our PC series power strong plastic crusher adopts high quality tool steel cutter, which is very endurable, mounted to be stretchable, and repeatedly usable.The shredder outline is bladed up with fastener ribs, hence the noise is extremely low.The feed hopper, chassis are separately designed, both screen and chassis are assembled on standard tooling holes, facilitating dismantling and cleaning.The feed hopper and screen holder are auto hoisted by pneumatic rod, safe and energy saving.The crusher is equipped with cleaning room protection, securing safety of material cleaning and cutter adjustment.Its motor is featured with overload protection and power interlock protection, to secure safety. The plastic crusher power from 2.2kw to 100kw, capacity from 100kgs/hour to 3500kgs/hour and it used for extrusion, injection, bottles, film, tyre etc. Export standard timber box.
PVC-WPC Profile Production Line Wood-plastic extrusion line adopts a specially designed screw barrel,mold and extruding machine to manufacture wood-plastic products including wood-plastic 1-step plate equipment;wood-plastic 1-step profile equipment;wood-plastic 1-step decoration materials equipment;wood-plastic two-step plate equipment;wood-plastic 2-step profile equipment;wood pelletizing equipment. Wood-plastic products can be extruded directly by single extruder,2-step extrusion can be acheived as well. With high output,stable extrusion, good plasticizing effect,energy-saving,space-saving. Optimal design of screw leads to smaller shear force which ensures the materials a uniform residence time in the machine. Screw barrel adopts bi-metallic treatment, wear resistant&corrosion resistant which extends its service life. Wood powder & plant fiber is up to max.50%-65%.
Manufacturers of extrusion coating plant, extruder, raffia tape plant, paper lamination, bag lamination, jute lamination, woven sack machinery
Manufacturers of extrusion coating plant, extruder, raffia tape plant, paper lamination, bag lamination, jute lamination, woven sack machinery.
Purpose: Usable for rubber or plastic plasticzing and mixing or rubber and plastic blending. Features: 1. Rubber or plastic stock can be plasticized or mixed in a closed and pressurized space with the temperature controlled so that the productivity is high and the quality is good and stable. 2. Optimization of the parameters such as the helical angle of rotor wings and the wing overlap length brings about even distribution of the stock. 3. All the parts in contact with stock are ground, plated with hard chrome and polished. The rotor wings are built up by welding with the abrasion-proof sintered carbide to resist abrasion and corrosion. 4. All the parts in contact with stock are of the jacket design where water/steam/medium oil is lead through to provide cooling or heating and can meet different requirements for the rubber or plastic mixing process. 5. Stock is fed through the rear door of the framework (or another port) and discharged by the mixing chamber tilting forward by 140°. Such a design makes it possible to arrange the upstream and the downstream process steps in a line and facilitates stock color changing and the mixing chamber cleaning. X(S)N1L-300L.
It is the semiautomatic creasing and cutting machine by hand, and is consited of machine base, pressing frame, electromagnetic clutch transmission mechanism, electric control, automatic resetting device and automatic counter cutting. We design and manufacture different standard products according to the different operation requirements. They have merits of more functions, big pressure and easy operation. Adopt high quality materials (cast iron), which has high strength, to make the machine's body; Single electromagnetic clutch is quick and reliable; The operation height is placed reasonable, and the angle of pressing frame can open big; Adopt 4-shaft gear structure, the running is steady, the cutting power is strong and the noise is low; There are three functions :single cutting, continuous cutting, and working in delay time, the range of delaying can be adjusted.; The electric equipment is designed according to the standard of IEC; The safety protection system is reliable; Centralized lubrication system. Main Technical Parameters: Model: ML-1300, ML-1400, ML-1500 working area of platen(L*W): 1300x920mm, 1400x1000mm, 1500x1050mm working Speed: 14(time)/min3, 14(time)/min3, 13(time)/min3 Max.Length of Cutting: 40000mm, 40000mm, 45000mm Distance Adjusting: +5.5 27mm -5.5: +5.5 27mm -5.5: +5.5 27mm -5.5: Model of Paper Feeding: By hand Overall Dimensions(L*W*H): 2450x2050x1950mm, 2600x2050x1910mm, 2540x2010x1910mm Weight: 5600kg, 6500kg, 7500kg Motor Power: 5.5kw, 6.5kw, 7.5kw Wooden case.
Pipe marking line is extruded by smaller single screw extruder through the composited extrusion die. Vacuum calibration water tank: it is equipped with two-stage vacuum system(for large diameter)advanced water recycle & high pressure cooling system, vacuum degree adjustment device and accurate water level & water temperature automatical control system. The accurate stannum bronze calibratation sleeve ensures fast cooling speed and molding of pipe. Its material is stainless steel. Spray cooling water tank: Long cooling unit ensures high efficiency cooling, Unique pipeline design shorten cooling length, its material is stainless steel. Haul-off unit: special integral transmission unit avoids asynchrony of individual transmission, Various control method ensures more flexible & accurate orientation, Accurate pressure regulating system makes hauling power adjustable. It has unique structure & flexible operation, its speed can be adjusted by motor inverter. Cutting unit: Full-hydraulic design of cutting unit ensures flexible pressure in state of cutting pipes, Flexible adjust for saw position & cutting depth, Unique power input system ensures high reliability of planetary unit, With ultra silent & enforced sucking system, Unique non-scrap cutting unit enusre clean cutting section for 16mm to 315mm pipe. Control system: Adopts the one of the most advanced plastic extrusion machinery control systems----PLC. It can ensure much higher quality extrusion, PLC system ensures high speed and convenient internet function that much more accurate and flexible control, intelligentized control order make the operation more simple. Packing in film or according to your needs.
Plastic granulator is an equipment to make film material, silk material or particles into plastic particles by extruding, cooling and pelletizing. Characteristics: this equipment is matched with crushing machine and granule cutting machine. Simply processes, advanced technology, and applied to different waste plastic materials. It is adopted the electric network, automatic temperature control and the energy-saving heater of state-grade patent with low power consumption, no-polluting, high degree of automation. Wooden box.
Use and characteristic: This unit is in the digestion absorption overseas vanguard technology foundation, develops the successful new product, For continuous production craft, This unit has the structure to be compact, the ease of operation, the output are big, automaticity higher merit It is produces the plastic strap material essential equipment. This unit mainly by the extruding machine, the nose, the cooling trough, a hauling, the hot drying oven, two hauling, flask, three hauling, curl installment and electricity control system constitutions and so on embosses the installment, to decide, mainly uses in PP hitting bandage's production. Wooden box.
PP sheet machine.
XH-401 two roll mill is mainly used to uniformly mix the raw material and additinal agents for testing and apply the experiment resoults and its ratio in the production line to satisfy the requirement of quality and color specified by the customer. • Built-in heater,together with LCD temperature controller and high-precision sensor,can automatically compensate the temperature to guarantee the temperature equalization. • Telfon stop block. • Taiwang gear motor,together with high-precision gearing chain,guarantees stable operation,low noise and good durability. • Emergent reverse guarantees the safety. • Alternative configuration:oil heating and cooling system,AC frequency control system,independent limitless speed change,automatic roller-gap adjustment ande man-machine interface. • Relyng on the principle of customer-based, the company can customize the product according to the customer's requirements. 450KG 1000*550*1200.
Xh-406 press machine is applicable to r & d in laboraty.Put the raw materials into the mold between the electric boards and set up certain pressure and temperature.The raw materials are formed into test specimen for test use.This machine features compact size, cmplete functions, stable temperature, low noise, easy opention and material saving. • High-performance oil hydraulic system with automatic pressure compensation function can preset the time and pressure between two pressurizations and automatically conduct pressurization and depressurization supplemented with high-precision cylinder. •high-precision and abration-resistance guide pillar features strong loading force and stable lifting. •imported kdb electric board features high-temperature resistance, abrasion resistance, fast thermal transmision and strength against deformation. •high-precison temperature sensor, together with led temperature controller, built-in dense-point heating wire and tubular condenser, has the temperature range from normal temperature to 300°c. •single heating can be designed according to the requirements. •oil hydraulic system:the pressure range:20 ton, the maximum stroke of the cylinder:140mm. Technical parameter Capacity: 10-50 ton or designated Area of electric board: 300mm x 300mm or designated Area of colling plate: 300mm x 300mmor designated Plate spacing: 0-90mm or designated Timepiece: led 0-99(min) Temperature controll: normal temperature-300°c Temperature precision: ±4.5°c Colling mode: compressor water colling or running water colling Outside dimention: 1000 x 600 x 1500mm(w x d x h): Power supply: 3ø, ac380v, 20a Weight: about 460kg. 460kg, 1000 x 600 x 1500mm(w x d x h).
1. Adopting Taiwan original JiangSheng motors. 2. Low noise and can guarantee the cleaning of the crushing material. 3. Easy to operate and clean which can reduce the loss and protect the environment. 4. The material is well-distributed after smashing. 5. The system has overload protection and interlock protect switch, ensuring the safety in producing. 6. Special design in blade to ensure all the materials can be crushed. 7. The product is suitable for the crushings in sheets, tube, section, plate and packing materials area. 8. The current mesh size is 3-12mm and we can make it based on customers¡¯ specific needs. 9. Adopting imported alloy tools, which can ensure the service life. 10. Equipped with mobile material box, easy for recycling. Crushing chamber mm: 410¡Á 235 Crushing ability kg/ h: 200-250 Stationary cutter: 2 Rotary cutter : 12 POWER KW : 7.5 HP : 10 Dimensions LxWxHcm : 103¡Á 84¡Á 139. Weight KG : 500.