Product Description Vice White Fused Alumina, also named Grey Fused Alumina, Brown Corundum or Sub White Fused Alumina, is an electro fused corundum with color similar to Brown Fused Alumina but lighter, and chemical and physical specifications to White Fused Alumina (WFA). It has an Aluminium Oxide (Al2O3) content of 97%min for most sizes which is close to WA. It's invented by a Japanese company to replace White Fused Alumina for refractories at the time when WA was much more expensive than BFA. At this time, it is not very popular, but still some customers like it, mostly because of its higher content of Al2O3 and higher true gravity density than Brown Fused Alumina. It is also produced out of high quality bauxite in electric arc furnaces in high temperature and has similar manufacturing to BFA. Mostly used as a refractory mineral, Vice White Fused Alumina can be used for high quality refractory bricks, refractory mortars, refractory castable, refractory crucibles, gunning materials, lining materials,pre-casting materials etc. It has very good heat resistant and thermal stability characters Vice White Fused Alumina Characters Refractory/Fireproof Vice White Fused Alumina has Aluminium Oxide (Al2O3) content of more than 97%,which is higher than BFA. It features high temperature resistance, thermal stability, corrosion proof and low porosity. These features are important to fireproof and refractory products. Low Impurities Vice White Fused Alumina has about only 0.8%max SiO2 and lower Fe2O3 than Brown Fused Alumina. SiO2 and Fe2O3 are easy to cause corrosion, rust stain, cracks, dark spot etc. when making refractory bricks. High impurities will be better for it. High Density Vice White Fused Alumina is density material with higher true gravity/density. This makes it a better material for making refractory products with higher density and durable performance. Vice White Fused Alumina Properties Physical Specifications Color Light Brown/Grey Grain Shape Angular Mosh Hardness 9 Melting Point 2350oC True Gravity 3.9g/cm3 Common Sizes 0-1mm,1-3mm,3-5mm,5-8mm,100mesh,200mesh,325mesh Chemical Specifications Aluminium Oxide(Al2O3) 96.5-98.5% depending on sizes Iron Oxide(Fe2O3) 0.15%max Titanium Oxide(TiO2) 1%max Packing: Big Bag of 1 Ton, 1.2 Tons or 1.3 Tons 25kg Woven Plastic Bag, 40 Bags in a Big Bag 25kg Woven Plastic Bags, 40 Bags on a Wood Pallet 25kg Paper Bag, 40 Bags on a Wood Pallet
White Fused Alumina(WFA),also called White Fused Aluminium Oxide, named by its white color, belongs to the electro fused artificial corundum group. It's an important mineral with chemical and high temperature stability, great purity, hardness and fireproof and refractory characters. White fused alumina is one of the most widely used raw materials for so many industrial fields, including refractory, bonded abrasives and coated abrasives industries. We are professional manufacturerfor customers in different industries and countriesaccording to FEPA, JIS, GB, ISO standard. 0-1mm, 1-3, 3-5mm etc. for refractories, FEPA F sizes for bonded abrasives aluminum oxide tools, FEPA P sizes for coated abrasives aluminum oxide products White Fused Alumina Typical Characters High Alumina Content White Fused Alumina has Aluminium Oxide(Al2O3) content of more than 99%, which guarantee the great performance in fireproof and refractory application High Purity White Fused Alumina has very limited impurities, usuallyNa2O¡¨¹0.4%,SiO2¡¨¹0.15% andFe2O3¡¨¹0.15%. High Hardness The high content of Al2O3 (Aluminum Oxide) obtainsWhite Fused AluminaMosh Hardness of 9 and wide application for cutting and grinding wheels, also, White Fused Alumina can be used for coated abrasives, sandblasting media for surface preparing and polishing of metallic and ceramic products. Sharp Edges White Fused Alumina is a crystal mineral with sharp edges and widely used in sandblasting,cutting and grinding abrasives. White Fused Alumina Properties Physical Specifications Color White Grain Shape Angular Mosh Hardness 9 Melting Point 2250oC True Gravity 3.96g/cm3 Bulk Density 1.75g/cm3-2.1g/cm3 White Fused Alumina-F120 Analyisis Al2O3: 99.41% SiO2: 0.05% Na2O: 0.31% Fe2O3: 0.03% Packing: Big Bag of 1 Ton, 1.2 Tons or 1.3 Tons 25kg Woven Plastic Bag,40 Bags in a Big Bag 25kg Woven Plastic Bags,40 Bags on a Wood Pallet 25kg Paper Bag,40 Bags on a Wood Pallet
SSAW Steel Pipe is adopt the Double Side Spiral Submerged Arc Weld technology. Physical and chemical inspections of the raw materials, welding wires and welding flux. And it is widely using for the long distance transferring of water, petroleum, natural gas, coal gas and pulped. Specification: O.D:219mm-3048mm W.T:5mm-25.4mm Steel Grade:Gr.A~Gr.X100,Gr.Q235B,Gr.Q345B,Gr.S355JRH,S355J2H,ST37,ST52 and STK400 steel types Length:6m~25m Packing: Loose with pipe end protector Size: Outer Diameter: 6mm-610mm (1/16"-24") Wall Thickness: 0.3mm-22mm Length: 0.5-20meter Quality standard: API 5L, BS1387, BS EN10025, BS EN10217, EN10240, ASTM A53, DIN 2440, DIN 2441, DIN 1626 Steel Grade: API 5L : GR.A, B, X42, X46, X52, X56, X60, X65 X70 ASTM A 53: Gr. A, Gr B EN10025/EN10217: ST33, ST37.2, ST44.2, St12, St13, St14, St44, ST52, FE360 Usage: Low pressure liquid delivery, such as water, gas, oil, or structure pipe, piling pipe Pipe End: Plain, beveled, threaded and coupled (Threading as per BS1387, ASTM A53) Pipe surface: Lightly oiled, hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) Packing: Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips, Plastic caps. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Third party inspection: SGS, BV, Lloyds etc. Hunan Standard Steel Co., Ltd Tel: 86-731-89878292 Fax: 0086-731-84788292 Mob: 0086-18123901489 Skype: hsco.samantha email@example.com Standard package as customer requested
Glass;Fiber Chopped Strand Mat Description E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process ;and laminating process, ;easy to process, with excellent ;forming performance. Chopped strand mat ;can be saturated with resin ;fast, ;with high ;transparency,;at the same time, uniform fiber ;makes the products ;smooth on surface ;during the lamination process,good performance on coating model. Glass;Fiber Chopped Strand Mat Characteristics 1)Weight is evenly distributed per gram 2)Saturated fast, 3)Bubbles easy ;to be eliminated, 4)High transparency 5)Excellent coating model;performance 6)Less;consumption of ;resin. Glass ;Fiber Chopped Strand Mat Application Mainly used for;tank, winding pipe;products,;the surface layer;of the glass products. Can improve the;surface;corrosion resistance and;enhance the;compressive strength for finished fiber glass products,;prevent leakage,;prolong the service life. Hand laying up;type glass;fiber mat ;is mainly used for;hand laying up ;product;with complex geometric curve,;it is with excellent coating model performance,rapid resin;saturated speed, canimprove the strength and;corrosion resistance performance for finished glass fiber mat products. Glass;Fiber Chopped Strand Mat Technical Parameters ModelTypeMass per Unite Area(g/m2)WidthLinear density(172;m) Loss on lgnition(%) WDQ150 E-Glass 150 104011-13 1.5%-8.5% WDQ225 E-Glass 225 1040 11-13 1.5%-8.5% WDQ280 E-Glass 280 1040 11-13 1.5%-8.5% WDQ300 E-Glass 300 1040 11-13 1.5%-8.5% WDQ450 E-Glass 450 1040 11-13 1.5%-8.5% ZDQ280 C-Glass 280 1040 13-17 3.0%-6.0% FDQ300 CP-Glass 300 1040 13-17 3.0%-6.0% Glass;Fiber Chopped Strand Mat Packaging Packing Quantity Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft 23tons/ 40ft Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft 23tons/ 40ft
Description YL-NNO is light brown yellow powder, an anion surface active agent. Easily soluble in water, acid, alkali and hard water. It has good dispersing property and affinity with protein and polyamide. Usage Mainly used for vat dye dyeing, reactive dye dyeing and acid dye dyeing. It can work as dispersant for acid staining pad and pigment pad dyeing; auxiliary for reducing dye powder and slurry. It can also be used in leveling agent in dyeing industry Advantages 1). As dispersant NNO;in disperse dye, vat dye, reactive dye, acid dye and leather dye. It has good grinding effect, hydrotropy and dispersibility. 2). As dispersant in textile printing and dyeing industry: pigment pad dyeing of disperse dye;vat acid dyeing of disperse dye; dye for silk and feather mixture; soluble vat dye dyeing; Etc. also can be used as dispersant for disperse dye and lake making; filler for commercial dye etc. 3). As dispersant in wettable pesticide and herbicide, the dispersibility and solubility of pesticide can be improved. 4). As dispersant in electroplating industry, so that the cladding film can be equal and have a better brightness. 5). As auxiliary tanning agent in leather industry, used together with tanning agent (ratio 1:10) to avoid tanning agent stickwith leather. Can also help to disperse dye to get a better appearance in color. 6). As dispersant for paper industry. After adding NNO into wood pulp to avoid the stain from the condensation ofasphaltum, resin and other material 0.2%-0.5% of the wood pulp weight as dosage is preferable. Can work as precipitator for animal size, 20%-30% of the size weight as dosage is preferable. 7). As dispersant in rubber industry. Can disperse sulfur, accelerant, anti-aging agent and some filler(like zinc oxide, barium sulphate, calcium carbonate etc). 2%-4% of the dry powdeweight as dosage is preferable. Can make NNO into 10% solution, then grind with others in ball grinder. 8). Also can be used in coating, painting, pigment, carbon black etc. 9). Can be used in color lake industry. Specification Item Specification Dispersing rate % 95%min Sodium sulfate content % 5 max pH value 7-9 Insolubles % 0.05% max Content of calcium and magnesium ion, ppm 2000 Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg
Description YL-09 NP is naphthalene-based non-chloride set-accelerating water-reducing admixture, it significantly accelerates setting time, and reduces the quantity of mixing water necessary to produce concrete of a given consistency, while providing greater economy for a given strength. It increases strengths and significantly improves permeability, workability and finishing characteristics. It complies with GB 8076-2008, GB50119-2003 and ASTM C494, Type E. Uses This product is designed for the constructions requiring earlier strength for normal concrete, steel-reinforced concrete, and pre-stress concrete under normal temperature, low temperature (-5 to 30 degree C). Widely used in pre-cast & deposit concrete, armored concrete, pre-stressed reinforced concrete and fly-ash-cement concrete. Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc. Suitable for self-cured concrete and its formulations. It has remarkable effects of water reduction and enhancement, especially at the early stage. The modulus and site utilization can be improved. Advantages Accelerating setting time across a wide range of temperatures. Increasing early and ultimate compressive and flexural strengths. Water reducing 10-15% with low dosage of 1.5-2.5% After application, all physical properties of concrete can be improved to a certain extent. 10%-15% of cement will be reserved when it is applied as a condition of blending in which collapsibility and strength are fixed forehand. Specifications Item Norm Item Norm Appearance Gray powder PH value 7-9 Fineness (0.315mm remains) % ¹12% Chlorine content Non Moisture ¡¨¹10% Fluidity of cement 160mm Technical Data Sheet Item Actual results Criteria Water-reducing rate (%) Y12 Y8 Bleeding rate ratio (%) 90 Air content (%) ¡¨¹2.5 4.0 Setting time difference (min) Initial setting -30+30 -90+90 Final setting -30¡«+30 -90+90 Compressive strength ratio (%)Y 1 day 145 135 3 days 140 130 7 days 120 110 28 days 110 100 Shrinkage ratio (%) 28 days ¡¨¹120 135 Corrosion reinforcing steel bar Non Package, Storage & Shelf Life For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg. It should be stored in a dedicated warehouse that is well-ventilated and dry and keep away from moisture. Shelf Life: Minimum 12 months. After the expiration date, it can be used if testing results is qualified. For powder: Woven plastic bag with film liner. Net weight: 25kg +/- 0.2 kg.
Annealed Tie Wire for Easy Baling There is a coil of annealed wire on white background. Annealed tie wire is a kind of baling wire used in farming, construction and daily life. Annealed wire also named annealed tie wire, a kind of baling wire widely used in daily binding, mesh weaving, crafts making, etc. Material: carbon steel wire. Technique: thermal annealing. Mechanism: Annealing is aimed at returning the ductility of wire which it had lost during drawing. Production facility: annealing pot, annealing furnace. Wire diameter: 0.71mm - 4.5mm. Wire gauge: 7 - 22 gauge. Types: black annealed Wire, bright annealed wire Features: good softness and elasticity, high tensile strength, excellent ductility, etc. Applications: Used in mining, chemistry, machinery. Used in making mesh, crafts. Used to bundle rebar in construction. Used as tie wire in farm, garden and daily life. Our annealed products can be painted with oil on the surface to prevent it from rusting and also can be further straightened and made into cut wire or U type wire according to your specific requirements. Black annealed wire There are three coils of black annealed wire. Black annealed wire has excellent flexibility and softness performance. Black annealed wire also named black annealed tie wire, a type of annealed wire applied in construction, industry and so on. Materials: Iron wire or carbon steel wire. Tensile strength: 30 - 50 kg/mm2. Features: excellent flexibility and softness, high elongation. Application: Used in wire mesh weaving. Used as baling wire in construction, industry, daily life. Applied in agriculture, such as baling hay, branches. Used for making handcrafts. Packing: in coils or spools, 10-200 kg/coil, plastic bag inside and hessian/woven cloth outside. Bright annealed wire Bright annealed wire also named bright annealed tie wire. Features: bright, smooth, beautiful. There is a coil of bright annealed wire on the ground. Bright annealed tie wire usually used to tie rebar in construction. Many annealed wires packed with plastic bag in coiled form. Annealed wire can be delivered in coiled form.
Type: Walnut Cultivation Type: CommonProcessing Type: Raw Style: Dried Packaging: Vacuum packing Grade: Top Use: food snack,cook fried soup, Place of Origin: South Africa Brand Name: D.S Color: Brown Specification:: 500g Packaging:: 500g/bag as per your requirements/As per clients requirement taste::delicious Type: Pine Nut Cultivation Type: Common Processing Type: Raw Packaging: vacuum plastic bags Certification: CIQ Grade: AA Use: human consumption Place of Origin: Sout Africa Model Number: PN Top quality pine nuts: size:550,600,650-700,900,1200,1800seeds/100g specification: moisture:3.0%max admixture:0.05%max broken kernels:2.0%max packing: 12.5kgX2vacuum plastic bags/CTN 12.5kgX2bags/Iron Drum with nitrogen, 16MT per 20FCL PRODUCT: CASHEW NUT CROP ORIGIN: GHANA AND IVORY COAST CROP YEAR: 2012-2013 GRADE: WW240, WW320, WW450 MINIMUM YIELD: 48 LBS PER 80KG BAG NUT COUNT PER KG: 180 --- 210 PCS MOISTURE: 5% FOREIGN MATTER: 2% MAX DEFECTIVE: < 5% Price Almond nuts: 1.high nutrition South Africa Raw almonds nuts 2.wonderful taste 3.good for the lung comodity: Almond nuts Size: length 1.2--1.5cm, Moisture: Max 6 % Purity: Around 99.00 % Broken almond: Max5 % Bad almond of obscure: 5% Aflatoxins: Max 5PPB Shelf Life: 2years Weight (kg): 25 Price for Pistachio nuts : Type: Pistachio Nut Cultivation Type: Common Processing Type: Raw Style: Dried Packaging: Bags Grade: Good Use: Food Place of Origin: south Africa Grades of pistachios AAA: ~95% whole + 5% split. AA: ~90% whole + 10% split. A: ~85% whole + 15% split. C: ~70% whole + 30% split. Per 100g of edible protein: Potassium: 1.020 gm Phosphorus: 5.000 gm Magnesium: 158 mg Calcium: 136 mg Iron: 7300 mg Selenium: 0.450 mg Nickel: 0.080 mg Vitamin: C 7.000 mg Vitamin: E 5.200 mg Nicotinamide: 1.450 mg Vitamin B1: 0.690 mg Vitamin B2: 0.200 mg Carotene: 0.150 mg Folic Acid: 0.058 mg
1mm-4mm thick grey paper board : Www.Dgpaper.Cn Skype: andy.Yspaper Specifications : 1.Weight: 220gsm--2500gsm (any grammage can be produce ) 2.Size / shape: Regular sizes are 787mm*1092mm and 889mm*1194mm, other sizes on request. In sheets or in rolls. 3.Detailed spacifications: Product 1mm-4mm thick grey paper board Brand Magic sun Magic lin Grade Aa= 100% virgin wood pulp heavy red card A = mixed pulp heavy red card Standard size: 787*1092mm 889*1194mm (any size are available) Special size As per clients' request Thickness 100gsm = 0.16mm Grammage 250gsm -- 2500 gsm Moisture 12% Application Packing & printing & gift & stationery Reel 0.48mm--1.36mm Sheet 0.48mm--4.0mm Packing method Plastic film & 4 plastic strip & wooden pallet 4.Usage: Generally it used to make gift boxes, cosmetic boxes, wine boxes and other boxes, also used for furniture fixtures, luggage bags lined plate etc. 5.Features: Consistent quality, high stiffness, good folding strength, less flexible 6.Sample: The buyer is free of sample and charge of the express . 7. Packing and packaging: Sheet in piles, waterproof film wrapped, put on four strong edge protector, packed on wooden Pallet, total height is 2.0m or 1.3m, 2.0m height suit for 20/40 gp loading, 1.3m double-deck used for 40 hq . 8. Shipping information Shippment :by sea , by air ...Etc Loading ability :20'fcl:15-17mt;40'fcl:22-25mt 9)payment : Payment terms : 30% depoist by t/t when confirm the order and balance against by t/t or l/c at sight before loading container . 10.Workshop , work term , certiciation and parameter on dispaly : This tradelead is designed to give an overview of our heavy red card products and the services we provide to inspire future partners to contact us: Skype: andy.Yspaper Tp:+86-769-82826651 Mp:+86-13829255192 Qq:2985598566 Size: 787*1092mm, 889*1194mm, 100g=0.16mm
Our company is mainly engaged in processing and sales of aluminum, we have one 2050mm and one 1250mm kaiping machine, one 1250mm slitting shear line, one 650mm slitting shear line, one 2100mm, one 1450mm and one 650mm tenso-shear line, five 1300mm and one 1250mm shearing lines, and two set of film laminating. Because of the above machine our production ability will be about 7000 tons every month. Our main products include 1xxx series, 3xxx series, 5xxx series, 6xxx series and 8 xxx series aluminum sheets, aluminum plates, aluminum coils, aluminum strips, aluminum foil and so on, thickness vary from 0.1mm to 20mm. Our main market is Canada, Ukraine, Russia, Cuba, Bosnia, Thailand, Vietnam, Korea, Egypt and worldwide. Our company has passed international quality management system ISO9001:2008 and International Environmental Management System ISO14001:2004. All of our products meet GB/T 3880-2006 quality standard and have past SGS test, you can be result assured of the quality. Our main products are8011,1050,1060,1070,1100,3003, 3004,3005,3105,5052,5005, 5754, 5083, 6061. Temper:O-H112. The thickness of our products varies from 0.1mm-6mm. For aluminum coil the width is from 10mm -1250mm. For aluminum sheet the width is from 50mm-1250mm. Other size will made based on customer's requirement. Packing: Waterproof paper cover the surface,wood pallet. 1*20ft container can load 16-20 tons aluminum sheet. (1) Standard seaworthy export packing, wooden pallets with plastic protection film for coils; (2) The packing for the coil: eye to sky or eye to wall based on the client's requirement; (3) Usually one 20 feet container can load about 16-20MT. Packing: Waterproof paper cover the surface,wood pallet. 1*20ft container can load 16-20 tons aluminum sheet. (1) Standard seaworthy export packing, wooden pallets with plastic protection film for coils; (2) The packing for the coil: eye to sky or eye to wall based on the client's requirement; (3) Usually one 20 feet container can load about 16-20MT.
What is Goldenseal P.E.? Basic Information: Goldenseal, are known as goldenseal Lian and also known for the perennial herb. Which originating in Canada and the eastern United States. Its dried roots and rhizomes are put into medicine. The medicinal value of Goldenseal are mainly depending to the high content of isoquinoline alkaloids which including hydras tine,berberine,hydrastinine, canadine,canadaline and ect.. And also containing opium poppy, chlorogenic acid, phytosterols, resin, volatile oil constituents and other elements. Goldenseal has played anti-bacterial, anti-inflammatory, convergence bleeding, callus, gallbladder role. It is widely used to eliminate respiratory, digestive, urinary and reproductive tract mucosal inflammation in North America. People has developed a variety of agents, which can be used for gastroenteritis, little stomach acid, gastric ulcer, dyspepsia, upper respiratory tract infections through oral administration; and which also can be used for topical treatment of psoriasis, hemorrhoids, goose head sores or wounds. Where will be Goldenseal P.E used to? • Anti-bacteria, tromethamine,stanch, cholagogic • Treat psoriasis, piles • Treat gingivitis, Oral ulcer • Treat taraxis Product-oriented: It always used in health care ,food , medicines The safety and dosage: 100% pure natural product ,no any side effect. Daily dose :50-500mg Packing Detail: Packed in 40cm*50cm paper-drums and two plastic-bags inside. Net Weight: 25kgs/drum. Storage Situation: Stored in a well-closed container away from moisture and strong light/heat. Shelf Life: Two years under well Storage situation and stored away from direct sun light. Product-oriented: It always used in health care ,food , medicines The safety and dosage: 100% pure natural product ,no any side effect. Daily dose :50-500mg Packing Detail: Packed in 40cm*50cm paper-drums and two plastic-bags inside. Net Weight: 25kgs/drum. Storage Situation: Stored in a well-closed container away from moisture and strong light/heat. Shelf Life: Two years under well Storage situation and stored away from direct sun light.
a. Applications of Manual Molding Silicone Rubber: Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toy, plastic toy, electronics, handicrafts, large-scale sculpture, reproduction of cultural relic, sole molds, pad printing allocation, Electronic equipment anti-vibration, etc. b. Model Codes of Manual Molding Silicone Rubber: HY-528 is applicable to make molds of smaller products and the production will be 2 to 3 pieces. HY-540, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20 to 30 pieces. HY-570is applicable to large size products duplications and Electronic equipment anti-vibration. b. Operation Instructions for Manual Molding Silicone Rubber: RTV-2 Manual Molding Silicone Rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2% to 3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2 to 3 hours. Note: The time for vacuum-pumping should be less than 3 to 5 mins, otherwise, once the silicone rubber has cross-link reaction during vacuum zing, it will not be operated. FAQ of manual molding silicone rubber: How to prevent silicone manual molds getting sticky? The main reason for this problem is that you do not handle the products or original molds well, and then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or an unsmoothed surface, you should polish and clean the products after which it will be molded, then spray the release agent. Normally, the release agent can be Vaseline, detergent. Liquid wax Etc. In practical process, you can bush different release agent according to different material. The second reason is that the operator pours the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely. Place of Origin Guangdong China Brand Name Hong Ye Silicone Rubber Payment & Shipping Terms: Minimum Order Quantity: 200 Kilogram Price: FOB shenzhen USD 4.8~7.5/KG Packaging Details: 25kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C,T/T Supply Ability: 8 Ton per Day Certifications:RoHS.MSDS.SGS ISO9001:2000 25kg/drum and 200kg/drum
Brief Description/Features of Manual Molding Silicone Rubber Manual molding silicone rubber 1. Good elasticity 2. Non-deformation 3. Heat resistance 4. Low shrinkage a. Applications of Manual Molding Silicone Rubber Manual Molding Silicone Rubber is mainly used for model design of manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment antivibration, etc. b. Model Codes of Manual Molding Silicone Rubber HY-528 is applicable to make molds of smaller products and the production will be 2-3 pieces. HY-540, compared to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces. HY-570 is applicable to large size products duplications and Electronic equipment antivibration. c. Operation Instructions for Manual Molding Silicone Rubber RTV-2 Manual Molding Silicone Rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two component. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours. Note: The time for vacuum-pumping should be less than 35 mins ,otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated. FAQ of manual molding silicone rubber ¨C How to prevent silicone manual molds getting sticky? The main reason for this problem is that you do not handle the products or original molds well, then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated pattern or a unsmoothed surface, you should polish and clean the products after which it will be molded ,then spray the release agent. Normally, the release agent can be Vaseline , detergent. liquid wax Etc. In practical process, you can bush different release agent according to different material. The second reason is that the operator pour the silicone into the mold when the mixture is mixed evenly, then the finish silicone mold will not cure and dry entirely. 25kg/drum and 200kg/drum
ADDEZ® APP Retention agent with large molecular structure and with a positive charge, can absorb the negative of fines and fillers, the retention effect, but its molecular structure and contains a large number of hydrogen bonds is easily combined with the fibers to enhance effect. The additives with talcum powder retention increased by more than 60%, fines retention increased 20 - 30%.In 2, ADDEZ® APP multifunctional papermaking additives for paper physical indicators have markedly improved. C level for plate paper folding can increase 2-30%, the general folding can improve 15-20%, at the same time as the fines retention increased, filling the interstices between the fibers. On the board of the pulling force, flexibility, smoothness and uniformity, can significantly improve.3, because the ADDEZ® APP multifunctional papermaking additives retention and fine fibre and filler retention improvement, make the network under the white water concentration is reduced, reduce the pressure of environment protection.4, has highlighted the filtration effect, which can improve the operation, reduce the end breakage, improve the speed, improve production efficiency, reduce energy consumption, and reduce the cost of production.5, has obvious so that glue. On AKD sizing agent has good retention effect, after using this product can reduce the using amount of AKD sizing agent.In 6, the product is highly soluble in cold water, thus diluting the convenient use.Product use:ADDEZ® APP multifunctional papermaking additives, mainly used in kraft paper, white paper, paperboard, writing paper, copperplate paper, newsprint, toilet paper and high, TolA and other aspects of the paper. Can enhance, retention effect.Product function method:In 1, the first auxiliary diluted with water 20 times before joining network uniformly high in box.2, like adding content of about 0.4-1.5 (paper products calculation ), the drug should not be used metal container for storing, appropriate uses plastic, glass or glass container.3, prevent the macromolecular chain breaking, suitable for low speed pump.In 4, the product should be stored in ventilation, shade 30 degrees C storage under appropriate.5, the paper in the physical test, should be in first place for 24 hours under the condition of constant temperature, or wet kept for a long time, so that the sample and air fully balanced, moisture consistent premise.Packing.Industrial use of 50kg or 200kg plastic barrels packaging. 25KGS
Basic Info. Model NO.: KI31 Control Type: Digital Display Type: Blender Material: Plastic/ Ceramic Certification: CE/CQC/CB/UL/cUL/TUV Usage: Temperauter Control Type: Temperature Switch Max Voltage: 250V Max Current: 16A Body Material: Bakelite or Ceramic Temperature Characteristics: Normal Opened or Normal Colsed Terminal Angle: Horizontal or Vertical Terminal Type: 6.3mm or 4.8mm Export Markets: Global Additional Info. Trademark: HX Packing: Carton or According to Customers Requirements Standard: customized Origin: Dong Guan,Guang Dong ,China HS Code: 9032100000 Production Capacity: 3000000 PCS Per Month Product Description Technical parameters: Electrical parameters: 1)CQC, VDE, UL, cUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2. Action temperature range: -10~260Centigrade (Optional); Temperature accuracy: 10Centigrade 3. Recovery and action temperature difference: 8~100Centigrade (Optional) 4. Connection method: Insert the terminal 250# (bending angle: 0~90¡ã Optional); Insert the terminal 18(bending angle: 0~90¡ã Optional; Thickness: 0.5, 0.8mm optional) 5. Lifespan: ¡Ý 100, 000 times 6. Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7. Contact resistance: 50M 8. Insulation resistance: 100M Junction method: Constant-closed: The contact point disconnects when temperature rises; And contact point connects when temperature falls; Constant-opened: The contact point connects when temperature rises; And contact point disconnects when temperature falls. 10. Casing protective class: IP00 11. Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12. Installation method: Installed for KI031 series: General moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Office Equipment Snap-action Thermostat Applications of KSD301 Thermostat 1. Water dispenser, Electric heater, Sandwich toasters, Dishwashers, Dryers, Disinfection cabinet, Microwave ovens, Electric coffee pot, Electric caldron, Refrigerator, Air conditioning gluing machine 2. Office equipment 3. The seat heaters. 1. 250V15A thermostat 2.Plastic body or ceramics body 3.Normal close or normal open 4. VDE TUV UL CE Certificate
Holland Wire Mesh 1.low carbon steel wire, PVC coated 2.good anticorrosion, age resisdence, beautiful shape 3.durable 4.ISO9001 Holland Wire Mesh Material: low carbon steel wire,PVC coated. Colors:moss green or grass green. Every other customs required RAL color can be delivered. Characteristics within refined design, lower prices, convenient installation, this kind of item is very favorable for the users. Using high quality steel as raw material, the welded panels body is very plain and strong resistance strength. Especially the horizontal wire is wavy. Good corrosion resistance, and aging, nice appearance, easy and quick installation. It is well suitable for a wide range of application, for example, for park, road and etc. Processing: PVC coated after welding of steel wire. Electro galvanizing, hot-dip galvanizing or PVC coating can be done separately. Specifications: 1. Nets wide: 0.5 m - 2.5 m 2. Before over(wire dia) Besmear after: 1.0-3.0(mm) 3. Aperture: 50*50 50*100(mm) Features: 1)Fence: using high quality iron road as raw material, the welded panel or rolled fence, after galvanized, PVC coat, it can resistance the corrosive and ultraviolet radiation very strongly. 2)Post: mushroom special tubes is designed refined and scientific, with plastic caps on the top of the post. The finished surface usually is galvanized and PVC coated, or alternatively. It usually uses installation method of burying additional 50cm pass panels height into the earth. Special sizes can be provided as the clients request. 3)Fastenings: the panels and posts are jointed together with the special plastic clamp or height strength steel wire clamp. They are easy to install, and very solid. Use: used in industry, agriculture municipal, traffic as the equipment for fencing, decorating, defending etc. The characteristics: good anti-corrosion, age resisdence , beautiful shape, easy and quick to install. If you are interested in our products, please contact us. Advantages: Elegant appearance, durable, easy to transport and install, filtration precision good, load with high strength. Use: Used in highway, railway, airport, residential quarters, ports, breeding, animal husbandry etc protection.
Plastic Grills, Molded (Cast) Grills, CTP Molded square cross-section grills, FRP Molded Grills Composite grills, molded, CTP orthophthalic grills,CTP isophthalic grills,CTP vinyl ester grills ,grills suitable for every sector. CTP Molded Cast Grills, produced by using variety of resins for different chemical conditions. Compared to metal grills, these grills are much lighter and can be easily processed. Due to high resin level, these grills provide an optimum chemical endurance and minimum maintenance. Cast grills; due to their fiber layers, provide flexibility on the use of panels both transverse and longitudinally, while providing high transport resistance. CTP Molded grills; square and rectangle pored are produced in single piece. CTP grills provide perfect traction on greasy, wet and icy surfaces which is ideal for chemical, industrial and maritime industries. CTP (Composite) Heavy Load Grills Grills those are suitable for uses at heavy load construction zones and heavy load machinery zones. For areas where steel grills are insufficient for load and width. Plastic Grill Closed Heavy Load Grill Diamond shaped designed plate, square profile heavy load grill; provide a safe working environment while providing a pleasant look. Resistance of these grills have been tested and proved for use areas such as busy traffic areas, construction zones that contain forklift and heavy construction machineries PULTRUDED GRILLS CTP profiles that have been produced by pultrusion technique – are constructed by the combination of CTP bars. Due to high fiber they contain, these grills have high resistance Pultruded grills are lighter and practical than metal. PULTRUDED PHENOLIC GRILLS Pultruded grills that contain phenolic resin are commonly used in areas where fire safety is important. Incomparable impact resistance, glass reinforcement and UV resistance responds to maximum levels of need. Pultruded phenolic fiberglass grills, meet all levels of requirements in USCG PFM 2-98 Level 2. Tested in independent laboratories. Fire tests done by the ASTM-E-84 Fire Test Standards, show the fire distribution level at 5 and smoke index at 5. Phenolic resin grills are certified accordingly to USCB rules, and Level 2 qualification of ships, tankers and oil refineries. Fire Proof Phenolic resin Grills Certifications: Rain Water Grill 570x570mm Medium grill interval, diagonal to the road 34,5 Kg 180° openable cover 485x485mm Medium grill interval, diagonal to the road 22,5 Kg 180° openable cover 640x345mm Medium grill interval, diagonal to the road 22,5 Kg 180° openable cover
W301 Water Vapor permeation tester tests the water vapor transmission rate (WVTR) of packaging material. This instrument is widely used in food industry, pharmaceutical industry, cosmetics flexible packaging materials industry(plastic film, barrier materials, sheets, metal aluminum, PVC,PVC sheets), college, university and quality institution for their water vapor transmission rate(WVTR) test and quality control. It carries the standards of GB 1037-1988 ,GB/T 16928-1997, ASTM E96-00e1 ,ASTM D1653-03,TAPPI T464,ISO2528. Working principle W301 Water Vapor Permeation Tester was designed with the principle of weighting method to use weight reduction method to test the water transmittance rate (WVTR) of plastic films. Namely in the regulated temperature, relative humidity conditions, the sample two sides keep the vapor different pressure, measuring the vapor volume passed through, figure out the WVTR value. Unit is g/ m224h. Specifications Measurement range0.02~10000 g/ m224h Measurement accuracy: 0.001 g/ m224h Temp. range1545 Temp. accuracy0.1 Humidity range: 0~20%RH dry method 10~90%RH (dual-airflow humidity method, selection Humidity accuracy: 2%RH Sample thickness2mm Sample no1piece Sample dia.:80mm, transmission area 50.24cm2, (no stipulate for area in international) Power supply: AC220V/50Hz Features 1, Automatic test, use friendly, 2, Instrument with configuration of 240,000 true color touch screen to work independently; 3, High-precision sensors with over-range protection, continuous data collection, accurate and reliable data; 4, Automatic control temperature, low requirements for environment; 5, Software displays the status of each curve ,all the test parameters on the real time showing; 6, Work independently without computer; 7. Test precision is the same with infrared method and coulometry method; 8. Superior components ,multi-level security protection design, 9. Calibration with two method of weights and standard film; 10. CE, UL, FCC certifications. 11. Versatile operation language support. 12. Test chambers can expand to ten or even more. Service :2 years coverage Speedy reply, 12hrs response to customer questions Software free update Minor maintenance ---parts ship within 24 hrs Major maintenance---Technical will be sent within 15 days Free inhouse training for customer operator.
Size: Outer Diameter: 21.3 - 762mm Wall Thickness: 1.25 - 63.5mm Length: Random Length, Fixed Length, SRL, DRL Usage: Applicable to the general structure, mechanical structure, water wall panel, economizer, super heater, boiler and heat exchanger with seamless steel tubes, and to transport liquid, gas, oil etc. Quality Standard: ASTM A106: Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service ASTM A179: Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes ASTM A192: Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service ASTM A333: Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service ASTM A335: Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service JIS G3452: Carbon Steel Pipes for Ordinary Piping JIS G3454: Carbon Steel Pipes for Pressure Service BS 3059: Steel Boiler and Superheater Tubes DIN 1629: Seamless Circular Tubes of Non Alloy Steels with special quality requirements DIN 17175: Seamless Steel Tubes For Elevated Temperatures API 5L: Line Pipe Steel Grade: Steel Grade:API 5L: GR B, X42, X46, X56, X60, X65, X70 ASTM A53/A106: GR A, GR B, GR C ASME SA106: GR.A, GR.B, GR.C ASME SA192: SA192 ASME SA209M: T1, T1a ASME SA210: GR.A-1, GR.C ASME SA213: T2, T5, T9, T11, T12, T22 ASME SA335: P2, P5, P9, P11, P12, P22, P91 DIN17175:ST35.8, ST45.8, 15Mo3, 13CrMo44 Heat treatment: Annealed: Bright annealed,Spheroidize annealed, Normalized, Stress relieved, Cold finished, Quenched and Tempered Surface: Hot dip galvanized, Black oil, Bare, Varnish coating, Antirust oil, Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE, Bitumen coating or as per customer¡¯s request. Pipe End: Plain end, beveled end, threaded and coupled Packing: Plastic caps on both ends. Bundle with steel strips. Wrapped in waterproof paper, PVC sleeve or as per customers request. Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection, Nondestructive Test (Ultrasonic flaw detector, Eddy current flaw detector), Hydrostatic Test., Mill Test Certificate: EN 10204/3.1B. Plastic caps on both ends. Bundle with steel strips. Wrapped in waterproof paper, PVC sleeve or as per customers request.
Walnut Shell Grit is a hard and fibrous product made from crushed Walnut Shell in accordance with international trade standard and it is the most soft type abrasive in existence days. It has excellent durability and is now widely used to blast clean and polish soft metals, glass, fiber glass, wood, plastic and stone. It works as a deburring and deflashing product for molding, casting and electrical parts. It is an efficient soft abrasive when used to tumble and polish gun casings, jewelry and metal parts and can also be used to prepare surfaces and equipment or wall for painting. The shells are ground into three grades of grits. The Coarse Grits are used for blast cleaning purpose, components can be cleaned without marking or etching the component’s blasted surfaces and also used in landscape mulching, Shape of every grains of our product is angular not in round, that gives best and fast results then others, and can reuse more time. The Medium Grits are used for cleaning machinery such as sprayers and grape-harvesting equipment; the military also uses it to scour battleships and jet engines. The Finest Grade is reserved for women's cosmetics scrub and skin care. MAJOR IND. APPLICATIONS : A BLAST CLEANING MEDIA: • For removal of paint, flash, burrs and other flaws in plastic, aluminum and zinc die casting and electronics industries. • As a replacement for paint removal, graffiti removal and general cleaning in restoration of buildings, bridges, and outdoor statuary. • In chemical and oil industry to cleanout the oily surface. • For aircraft engine cleanout. • For cleaning steam turbines. OTHER USES : • Prevents lost circulation in oil well drilling • For west water filtration. Walnut shell is used as media to remove harmful contaminates, oil and solids from the water. • Provide a non-skid enhancer in abrasive paints around swimming pools, walkway, dock boards and paddle ball courts. • To manufacturing coated abrasives, glass cleaning pads, plywood etc. • For woman's cosmetics scrub and skin care. BENEFITS OF SOFT ABRASIVES : • Non-toxic causes no health or environmental hazards. • Re-usable, long lasting.Reduces cycle time of finishing operations. • Preserves micro finishes. SIZES AVAILABLE : Group Sizes: 4-6, 8-12, 12-16, 12-20, 20-30, 30-40, 40-60, 60-80 Single Mesh Sizes 6, 8, 10, 12, 14, 16, 18, 20, 24, 30, 36, 46, 60, 80, 100, 120 or as per requirement. PHYSICAL CHARACTERISTICS : Specific gravity - 1.2 - 1.4 Hardness - 2.5 - 3.0 on MOHS scale. PH - 7.5.