Wire nails, plastering trowel, wood designed doors, wall hanging, jali cut.
Scutch combs, aluminum hawk, floor scrapper, plaster trowel, hammer, axe, shovel, auger, ground anchor.Manufacturer
Concrete micro fiber pp fiber use way: concrete, cement , putty, mortar advantage: 1.prevention of contraction crack. 2.improvement of anti-shock and resistance to stripping. material: 100% polypropylene density: 0.91g/cm3 type: monofilament fiber diameter: 18-32um fiber denier: 3-6d length: 6-48mm tensile strength: 500mpa crack elongation: 15-25% melting point: 160 resistance to acid, alkali: strong water absorbency: no packing: 600g bag, 900g bag, 10kg bag delivery: 20 days sample: free MOQ: 1,000kg
HPMC for wall putty is used to apply tiles on concrete or brick walls. It consists of cement, sand, limestone, our HPMC and various additives prepared for mixing with water prior to use. HPMC plays an important role in improving water retention, workability and sag resistance. In particular, HPMC for wall putty helps to improve adhesion strength and open time. As a functional decorative material widely used nowadays, tile has different shapes and sizes, unit weights and densities, and how to paste this durable material is a constant concern. the presence of HPMC for wall putty ensures to some extent the reliability of bonding works, and the appropriate cellulose ether ensures the smooth construction of different types of ceramic tiles on different bases The appropriate cellulose ether can ensure the smooth construction of different types of ceramic tiles on different foundations. We have a wide range of HPMC products available for various tile bonding applications to ensure the development of strength and achieve excellent bonding strength. The more you can click here.
HPMC used in wall putty, tiles adhesive, and so on.
Plumber s Putty is specifically designed for plumbing applications. It provides a waterproof seal between two rigid surfaces. Plumber s Putty is a long lasting, easy to use fixture setting compound for settingframes, faucets and basket strainers. It remains flexible and resilient and will not harden, shrink, crack or crumble. Color: gray, customized Size: 400g, 1.5kg, 2.5kg, 20kg, customized. Precautions: - Read all cautions and directions carefully before using this product. - Do not use plumber s putty on marble granite, limestone or any other dimensional stone. - Do not use on ABS or other plastics. - Keep container closed when not in use. - Do not reuse empty container. - Keep out of reach of childred and pets.
Trowels
Gypsum powder (plaster of Paris), bitumen, urea in bulk, iron ore, base oil, sponge iron, incubator, caustic soda flakes, marble stones, coffee, lentil, foodstuffs, car and car spare parts, alfalfa hay, saffron, pistachios .
Model 110 Product Name High Quality Block Wall Automatic Wall Rendering Machine Price Weight â?¥110KG Dimension 1100x650x3500mm Power 380V/220V,50Kz-60Hz,2.75KW Work efficiency 500-600 Sqm Per Day Plastering Thickness 0.2cm--3.5cm Plastering Width 1100mm Plastering Height 5m Length of Plastering Trowel 1200 MM Portal Frame Unfoldable Position Industry microcomputer automatic vertical system Motor Germany Wanshin Plastering Plate High Speed Steel Electricity Phase Single/Three Phase Beam Available Package Wooden Case Suitable for Long Way Transporation
* PHOSCAST Phoscast : Phosphate Bonded Castables * PURPOSE customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system. BACKGROUND * Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles. * GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates. Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion * Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected. APPLICATION Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
Textiles egyptian cotton, bed linen as well as other cotton based products heavy machinery and hydraulic press woven like fabric textile agriculture products (fresh fruits&vegetables all kind) bitumen mixture and other construction chemicals and industrial products limestone plaster.Commercial agency
When you are buying your dream home you need to stay aware of a group of factors regarding the construction materials. You need to have a clear idea of what you are buying regarding the Best TMT bars used, regarding the corrosion resistance and the durability of the same. However, things can be a bit different when you have a proper guide for guiding you in terms of construction material purchase otherwise you may end up doing repeated construction renovations.
HPMC It's a kind of chemical materials, white or slight off-white granular powder, ororless. HPMC is a natural polymer materials as a raw materials, through a series of chemical processing and prepared non-ionic cellulose. What is HPMC for gypsum Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose ether obtained from cellulose after alkalinization, etherification, neutralization and washing. HPMC for gypsum has good thickening, dispersing, emulsifying and film-forming properties, and is the first choice for producing high quality building material additives. Properties of HPMC for gypsum To meet the needs of environmental protection, our product has the characteristics of high water retention, good dispersibility, good fineness, good processability and easy dissolution. It is widely used in building substrates, with good water retention and improved workability. It can also prolong the opening time and improve the anti-sagging property.
Wall putty is a waterproof white cement-based putty ideal for use on concrete/mortar walls (interior and exterior) and ceilings. It fills the fine pores of mortar/concrete walls and ceilings and proves to be the white, smooth and dry surface necessary for painting. Thickening: Our HPMC products thicken putty powders to enhance their suspending ability, resistance to sagging, and to maintain a homogeneous solution. Water Retention: Our product keeps the putty powder in a moist state, allowing the auxiliary calcium ash to react in the presence of water. The more about HPMC for Wall Putty you can click here.
Gypsum is a soft sulfate mineral composed of calcium sulfate dihydrate, with the chemical formula CaSO42H2O.[3] It is widely mined and is used as a fertilizer and as the main constituent in many forms of plaster, blackboard/sidewalk chalk, and drywall.
Gypsum Plaster.
Cementitious perlite based lightweight plaster usable on exterior and interior walls. Contains powder additives enhance water repellency, higher strength and easy application. Water repellent Fire resistance- class a1 Especially reduces pulsed sounds Lighter than traditional mortars Provides breathable walls with its porous structure Doesn’t cause humidty Applied as traditional methods Packing kraft bag Appereance : granular powder Application temperature : +5 °c /+30 °c Method of application: steel trowel - plastering machine. Test drying time: 28 days Upon application: 2-3 days (depending on the thickness of the material): (23 ° c-50% relative humidity Conditions) Storage: 8 packs can be stacked on damp-dry environment and its packaging Shelf life: 12 months in unopened packaging and dry environment Pot life: 120 minutes pot life at( 23 °c-%50 relative humidity conditions)
Parameters and Specifications Whiteness Unit: % Acceptance Limit: 88up Results: 95.5 Test Method: Whiteness Meter WSB-2A Initial Setting Time Unit: min Acceptance Limit: 6-12 Results: 7:30 Test Method: BS EN 13279-2 Final Setting Time Unit: min Acceptance Limit: 12-25 Results: 16 Test Method: BS EN 13279-2 Water/Stucco Ratio Unit: % Acceptance Limit: NA Results: 83 Test Method: BS EN 13279-2 Compressive Strength Unit: N/mm^2 Acceptance Limit: 6up Results: 7.5 Test Method: BS EN 13279-2 Flexural Strength Unit: N/mm^2 Acceptance Limit: 2up Results: 2.75 Test Method: BS EN 13279-2 Remain on 200 mesh sieves Unit: % Acceptance Limit: 90 Results: 95 Test Method: ASTM -C471-M-20