.Host machine is distyle type, which makes the conformation compact and arrangement reasonable. 2.Manually controlling compression load is easy and convenient. 3.Mechanic limit pistons protection assures the safety of testing. 4.Setup overload protection which can stop automatically,when the load exceeds the maximum by 2-5%. 5.Data acquisition system adopts advanced CMOS chip integrated technology, real time displays force and force peak value. So the machine is accurate and stable. 6.Display loading rates, so the manual load is more homogeneous and accurate. 7.Reserved data interface can connect with network directly, realizing resource sharing. Overall dimensionú¿mmú¬ Host machine 950í-650í-1405 1120í-660í-1650 910í-580í-1800 910í-580í-1940 HPC í¬ í¬ 600í-600í-1020 600í-600í-1020 Weightú¿kgú¬ 700 800 3000 3200
Motorcycle Engine type: single-cylinder, four-stroke and air-cooled Bore x stroke: 56.5 x 49.5mm Piston displacement: 124.5cc Compression ratio: 9:1 Maximum power: 8.0kw/8, 500rpm Maximum torque: 8.5nm/7500tpm Transmission system: chain drive Ignition type: cdi Starter system: electric/kick Transmission: five-speed L x w x h: 1, 900 x 735 x 1, 025mm Wheel base: 1, 300 Ground clearance: 150mm Dry weight: 105kg Brake (front/rear): disk/drum Type, front: 2.75 to 18 Type, rear: 2.75 to 18 Fuel tank capacity: 10l Maximum load capacity: 150kg Maximum speed: 85kph Packaging: rail framework and carton Container capacity: skd/cbu 129/103 units/40-foot hq container Delivery time: 18 to 25 days Cbm: 1, 680 x 550 x 865 Skd/cbu 129/103 units/40-foot hq
Flexographic machine Flexoline is the last generation lombardi flexo press. Flexoline's printing unit is our bigger technical success: it is a masterpiece of precision and simplicity of use. In fact printing unit's project was developed inspiring to hyper systems technical concept. A system is said to be a hyper system if its features optimize a specified technical parameter. More in detail flexoline's printing unit exhibits: Hyper-fit-system: an innovative system is used for print rolls allowing for immediate fitting of cylinders of different diameter with no need for an adapter. In fact print rolls lay on a special algorithmical-studied curve that ables to keep constant the printing pressure varying the roll diameter. (it minimizes the fitting time). Hyper-fix-system: the plate cylinder is pneumatically clamped with a conical piston that grants irreversibility of motion and reduces motions and vibrations to a minimum. (it optimizes stability). Hyper-clean-system: when the machine stops, the ink roller (anilox) is first removed, followed (after a settable time) by the print cylinder, in order to clean ink in excess (an essential operation when using non-uv inks).(it minimizes cleaning time). If you are interested please contact us.
Specification: Engine Type: 4-Stroke, Air cooled UC Cylinder Arrangement: Single Cylinder Transmission System: Chain Drive Bore x Stroke(mm): 67X65 Piston Displacement(cc): 230 Compression Ration: 9.2:1 Maximum Power(kw/r/min): 11.5/6500 Maximum Torque(N.m./r/min): 17.5/5500 Starting System: Electric Starter Lubrication: Oil Injection Transmission: 5-speed,manual Clutch Wheel Base(mm): 1350 Seat Height(mm): 880 Min Turning Radius(mm): 2300 Ground Clearance(mm): 340 Rider Capacity: 1 Brake(Front/Rear): Disc/Disc Tyre,Fromt: 80/100-21 Tyre,Rear: 110/100-18 Ignition Type: CDI Fuel Tank Capacity(L): 8.8 Front Suspension: hydraulic Rear Suspension: hydraulic Dry Weight(kg): 118 Max Load Capacity(kg): 138 Battery: 7Ah Overall Length(mm): 2130 Overall Width(mm): 850 Overall Height(mm): 1225
Aluminium filter fabric This product is woven with specific high-twisted yarn and then treated, the heat-resistance temperature of this product can be up to 700c.Deg and even above 800 c.Deg if with special treatment. It is an ideal material to filter aluminum in smelting and casting process. Series nettings can be provided, having advanced technology and stable quality. They are widely used for filtration of molten aluminium in foundry of automobile wheel motorcycle wheel cylinder piston as well as aluminium alloy parts. The filter netting and filter fabric are particularly effective to separate bubbles nip ashes suspended oxides and other impurities from the molten aluminium so as to avoid other metal intermingled and ensure the quality of aluminium casting. Compared with other metal filter, the products possess same characteristics of high temperature resistance and stable meshes. In addition, they will help to utilize the waste material (netting pieces float on the surface of molten aluminium). Glass fiber filter netting and filter fabric are excellent filtration materials for foundry. 1000sqm, 210kg
Engine type 4-stroke ,single cylinder ,air cooling ,automatic ,50cc Transmission system Chain drive Bore x stroke (mm) 39x 41.7 Piston displacement (ml) 48.5 Maximum power (kw/ r/min) 2.2/7500 Maximum torque (n.M/r/min) 3.0/6000 Starting system Electric starting Seat height 550mm Ground clearance (mm) 100 Brake (front /rear) Drum/disc Tyre (front ) 145/70-6 Tyre (rear ) 145/70-7 Ignition type Cdi Fuel tank capacity (l) 3 Front suspension Double a-arm Rear suspension Mono-shock swing arm Parking brake Mechanical lock Battery 12v 7ah Max loading 45kg Engine oil capacity (l) 0.8 Rider capacity 1 person Rear track 500mm Front track 480mm Wheel base 830mm Overall length 1200mm Overall height 725mm Overall width 850mm Lubrication Oilinjection N.W/g.W 85/ 98kg
Engine Type:4-Strokes,150cc Air Cooled > Transmission System: Chain Drive > Bore x Stroke(mm):56.6X57.8 > Piston Displacement:149.5 > Maximum Power(kw/R/min):6.5/7500 > Maximum Torque(N. M. R/min):9/6000 > Starting System: Electric Starter > Transmission: V-belt CVT > Seat Height(mm):720 > Min Turning Radius(mm):2000 > Ground Clearance:100 > Brake(Front/Rear): Drum/Disc > Tyre, Fromt: AT19 X 7-8/2.9 Psi > Tyre, Rear: AT18 X 9.5-8/2.9 Psi > Ignition Type: C. D. I > Fuel Tank Capacity(L):7.8 > Front Suspension: Independent suspension > Rear Suspension: Monoshock Swing Arm > Parking Brake: Mechanical Lock > Battery:12V-9Ah > Max Load Capacity(kg):95 > Engine Oil Capacity(L):0.9 > Gear Oil Capacity(L):0.11 > Dry Weight(kg):150 > Rider Capacity:1 Person > Wheel Base:1080 > Lubrication: Pressuring splash > Product dimensions:1700(L) x 980(W) x 1100(H)mm > Compression Ration:9.2:1 > Cylinder Arrangement: Single Cylinder
Introduction The model sgf is a product innovated and upgraded on the basis of this companyf+s series products and introduced foreign advanced filling machine technology.. The product is simple and reasonable in design, high in accuracy and easy in operation. Suitable for filling various kinds of highly viscous fluid in the industries of pharmaceutics, daily chemicals, foodstuffs, cosmetics, pesticide and special trades. With no need for power supply, the machine is safe and with the personalized design, can meet the modern enterprisesf+ requirements. This machine is the semi-automatic double piston liquid filling machine, working under the state without electricity, it is safer to operate. This machine has two filling heads in-phase, improving the work efficiency. This machine reasonable in design, smart in model, easy to operate, the pneumatic part adopts the pneumatic components of germany festo and taiwanf+s airtac. The part contacting materials is made of 316l stainless steel. With adjustment handle of filling volume, the filling speed can be adjusted at will, with high filling accuracy. Filling head adopts anti-leakage, anti-pull and with diving filling device. Parameter·ª Item parameter Air pressure 0.4·í0.6mpa Filling speed 10-40 bottle/min Filling accuracy +qf+1¼t Filing volumes range 25-60ml 50-125ml 100-250ml 200-500ml 400-1000ml 900-2500ml 2200-5000ml Weight about 50kgs
Chain saw Winner built premium 2-cycle engine 2) high-torque engine 3) 1-piece electronic ignition 4) externally-adjustable, boot-mounted walbro wt carb 5) oregon or carlton saw chain. They all meet the ansi low-kickback requirement 6) 4-bolt muffler 7) fully adjustable, automatic chain oiling pump 8) aluminum alloy front handle bar 9) chain brake 10) chain catcher 11) hand guard 12) 3-shoe centrifugal clutch 13) 7-point anti-vibration system 14) rim-type sprocket 15) 2-ring piston design 16) high-impact glass filled nylon rear handle and recoil housing 17) easy access air filter 18) chrome-plated cylinder 19) magnesium alloy case Specifications: 1) displacement: 45cm3/2.7cu.Inch 2) maximum power: 2.0kw/2.8hp 3) rpm at maximum power: 7, 500rpm 4) operating range: 6, 000-10, 000rpm 5) vibrations, front/rear handle, 4.8m/s2/ 6.5m/s2 6) bar lengths: 20inch Dry weight, less attachment: 4.6kg
Engine Model 4TNV94L(Yanmar ) Type 4-cycle water-cool direct injection Number of cylinder 4 Bore í-stroke (mm) 94í-110 Piston displacement (L) 3.054 Rating power (KW) 37.9 Rating rotating speed (rpm) 2200 Alternator (A) 40 Battery (V, Ah) 12,105 UNDERCARRIAGE UNDERCARRIAGE Number of carrier rollers 1 each side Number of track roller 5 each side Number of shoes 38 each side HYDRAULICS HYDRAULICS Hydraulic pump (UCHIDA) Hydraulic pump (UCHIDA) Type Variable displacement piston type Max. flow (L/min) 55í-2,35.6í-1 Setting pressure (MPa)(kg/m2) 20.6/(210) Valve (Kawasaki) Valve (Kawasaki) Type BCV-65/10 Control Full hydraulic joystick Travel motor (KYB) SJ-T55(BRAKE VALVE) Swing motor (Kawasaki) SJ-T55(SAFE VALVE) Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterú¬í-Stroke Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterú¬í-Stroke Boom (mm) 115í-65í-840 Arm (mm) 100í-60í-865 Bucket (mm) 90í-55í-710 Blade (mm) 120í-70í-130 ATTACHMENT ATTACHMENT ATTACHMENT Bucket (m3) 0.28 standard type Bucket (m3) 0.22 small bucket (choose and buy) Hydraulic hammer SHB300 (choose and buy) WORKING RANGE WORKING RANGE WORKING RANGE Operation weight (kg) 6000 Max. digging height (mm) 7150 Max. dumping height (mm) 5015 Max. digging depth (mm) 4100 Max. vertical wall digging depth (mm) 3505 Max. digging reach (mm) 6328 Max. digging reach at ground level (mm ) 6220 Max. height at Min. swing radius (mm) 5460 Bucket digging force at power Max.(KN) 54.8 Swing speed (rpm) 9 Travel speed (km/h) L:2.3/H:4.3 Average ground press (KPa) 27.8 DIMENSION DIMENSION DIMENSION Overall length (mm) 6080 Overall height (to top of boom)(mm) 2500 Width of crawler (mm) 2225 Overall height (to top of cab) (mm) 2590 Ground clearance counter weight (mm) 750 Min. ground clearance (mm) 350 Tail swing radius (mm) 1750 Length of track on ground (mm) 2130 Track length (mm) 2765 Track gauge (mm) 1700 Width of crawler (mm) 2150 Width of track shoe (mm) 450 Min. swing radius (mm) 1740 Width of blade (mm) 2260
Model Cummin4bta3.9 Type 4-cycle water-cool direct injection and turbocharged Number of cylinder 4 Bore í-stroke (mm) 102í-120 Piston displacement (L) 3.9 Rating power (KW) 82 Rating rotating speed (rpm) 2200 Alternator (A) 35 Battery (V, Ah) 12,120í-2 UNDERCARRIAGE UNDERCARRIAGE Number of carrier rollers 2 each side Number of track roller 7 each side Number of shoes 42 each side HYDRAULICS HYDRAULICS Hydraulic pump (Kawasaki) Hydraulic pump (Kawasaki) Type Variable displacement piston type Max. flow (L/min) 128í-2 Setting pressure (MPa)(kg/m2) 34.3/(350) Valve (Kawasaki) Valve (Kawasaki) Type KVMM-160 Control Full hydraulic joystick Travel motor (KYB) MAG-85VP(BRAKE VALVE) Swing motor (Kawasaki) M2X63CHB(SAFE VALVE) Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterú¬í-Stroke Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterú¬í-Stroke Boom (mm) 105í-70í-990 Arm (mm) 115í-80í-1175 Bucket (mm) 95í-65í-885 ATTACHMENT ATTACHMENT ATTACHMENT Bucket (m3) 0.53 standard type Bucket (m3) 0.45 rock type (choose and buy) Hydraulic hammer SHB600 (Choose and buy) WORKING RANGE WORKING RANGE WORKING RANGE Operation weight (kg) 13000 Max. digging height (mm) 8630 Max. dumping depth (mm) 6180 Max. digging depth (mm) 5501 Max. vertical wall digging depth (mm) 4940 Max. digging reach (mm) 8309 Max. digging reach at ground level (mm ) 8180 Max. height at Min. swing radius (mm) 6433 Bucket digging force at power Max.(KN) 78.4 Swing speed (rpm) 12.6 Travel speed (km/h) L:3.1/H:5.3 Average ground press (KPa) 42.4 DIMENSION DIMENSION DIMENSION Overall length (mm) 7576 Length on ground (transport)(mm) 4402 Width of crawler (mm) 2489 Overall height (to top of boom) (mm) 2780 Overall height (to top of cab) (mm) 2813 Ground clearance counter weight (mm) 870 Min. ground clearance (mm) 433 Tail swing radius (mm) 2015 Length of track on ground (mm) 2750 Track length (mm) 3486 Track gauge (mm) 1960 Width of crawler (mm) 2460 Width of track shoe (mm) 500 Min. swing radius (mm) 2495 Distance between swing center (mm) 2015
Engine Model CUMMINS6BTA85.9, or ISUZU 6BG1TQB-05 Type 4-cycle water-cool direct injection and turbocharged Number of cylinder 6 Bore í-stroke (mm) 102 125 or 105í-125 Piston displacement (L) 5.88 or 6.494 Rating power (KW) 125 or 117 Rating rotating speed (rpm) 2100 or 2150 Alternator (A) 35 or 40 Battery (V, Ah) 12,120 2 UNDERCARRIAGE Number of carrier rollers 2 each side Number of track roller 8each side Number of shoes 47 each side HYDRAULIC Hydraulic pump (Kawasaki) Type Variable displacement piston type Max. flow (L/min) 226í-2 Setting pressure (MPa)(kg/m2) 34.3/(350) Valve (Kawasaki) Type KWX15R Control Full hydraulic joystick Travel motor (KYB) MAG-170VP(Brake valve) Swing motor (Kawasaki) M5X130CHB(Safe valve) Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterí-strokeú¬ Boom (mm) 130í-90í-1275 Arm (mm) 140í-100í-1635 Bucket (mm) 130í-90í-1020 ATTACHMENT 10M standard type Bucket (m3) 1.0 standard type Bucket (m3) 0.8 rock type (choose and buy) Hydraulic hammer SH800 (Choose and buy) 15Míó18M long boom type (choose and buy) Bucket (m3) 0.45 Bucket (m3) 0.29 WORKING RANGE Operation weight (kg) 22180 Max. digging height (mm) 9255 Max. dumping height (mm) 6383 Max. digging depth (mm) 6930 Max. vertical wall digging depth (mm) 5915 Max. digging reach (mm) 10173 Max. digging reach at ground level (mm ) 9993 Max. height at Min. swing radius (mm) 7717 Bucket digging force at power Max.(KN) 159.7 Swing speed (rpm) 11.7 Travel speed (km/h) L:3.1/H:5.5 Average ground press (KPa) 52.16 DIMENSION Overall length (mm) 9739 Length on ground (transport)(mm) 5162 Width of crawler (mm) 2980 Overall height (to top of boom) (mm) 3135 Overall height (to top of cab) (mm) 2939 Ground clearance counter weight (mm) 1064 Min. ground clearance (mm) 442 Tail swing radius (mm) 2838 Length of track on ground (mm) 3445 Track length (mm) 4256 Track gauge (mm) 2380 Width of crawler (mm) 2980 Width of track shoe (mm) 600 Min. swing radius (mm) 3974 Distance between swing center (mm) 2809
In DTH drilling, the drill string rotates while the drilling hammer continuously strikes down into the rock. Inside the hammer, a piston powered by compressed air gives the drill bit its striking power. This combined with the rotational movement means the rock is crushed in a very efficient manner
*Resistance length is 80 cm. *Piston length is 200 cm. * Working principle is pneumatic and air pressurized. *The electrical circuit is 380volt and it is a mechanical system. *It will be made of 304 quality stainless steel. *Conveyor system and elevating platform belong to the buyer company. * It can pack between 250 kg and 1000 kg.
Place of Origin: Shandong, China (Mainland) Brand Name: lake ; Model Number: all models ; Theory: Centrifugal Pump; Structure: Piston Pump Usage: Oil Standard or Nonstandard: Standard Fuel: Diesel ; Pressure: High Pressure Application: Cryogenic; color: as client's request
SIN-100D is a piston compressor nebulizer. The unit seems cute and favor by children. Standard Specification: 1.Motor:110V/230V/50/60Hz 2.Air flow:6-8lpm 3.Operation pressure:8-16psi 4.Compressor pressure:29psi 5.Noise level:
Vertical flask type demonstration mode, on metal base.In a four stroke engine, to perform full cycle of operations (changing the contents of cylinder and effecting combustion) four strokes of piston are required. This type of engine is used in Motor bikers, Petrol driven cars and certain types of scooters
Protective Cap/Bellow, shock absorber OE REPLACEMENT 4D0 412 137C Material: polyurethane/rubber 100% brand new and high quality. Application: Prevent dirt and moisture from damaging the piston surface and seal
Aftermarket Replacement Shocks & Struts Dust Boot Material: polyurethane/rubber 100% brand new and high quality. Application: Prevent dirt and moisture from damaging the piston surface and seal High quality and reasonable price. OEM standard, also for aftermarket
1. There are lots of available A2FM series hydraulic piston motor in stock. 2. We are professional supplier of Rexroth hydraulics. 3. Our factory has more than 10 years exprience in hydraulic industry. 4. Our factory is closed to Shanghai port & Ningbo port.
