Size from 10mm to 100mm in diameter and with material as per user choice.
Self-propelled lawn mower/Blade brake Mating Power: Honda GXV160 SFC Enginetype: single-cylinder, forced air-cooling, 4-stroke Displacement: 163cc Max.Power: 5.5HP Cutting Height:15-85mm Cutting Width: 530mm(21") Travel Speed: 2.88-4.32km/h Deck Material: Aluminium Drive type: cardan drive, 3 speed/blade brake Front & Rear Wheels: 203mm Blade Speed: 3200r/min Grass Bag Capacity: 70L N.W.: 53kg G. W.: 58kg MEAS.: 950,580,445mm QTY:120pcs/20FCL, 240pcs/40HQ. Paper carton.
Engine model : Honda GX35 Displacement : 35.8cc Rotation speed(rpm) : 7000 Max outpower(kw/rpm) : 1.10/7000 Fuel tank(L) : 0.63 Carburetor : Diaphragm Starter : Recoil. Color carton.
Capacity: 50~350m3/h Color: as per your requirement. Min order:1 set.
Pe series jaw crusher is widely used for primary crushing of hard rocks and block materials. It is widely used in chemical, mineral, quarry, building materials, road, railway and water conservancy and hydroelectric power industry. The large and medium-sized crushers are the key products of our company for their advantages of design and production. Working principle of jaw crusher: The motor transmits through belt, drives the movable jaw up and down by eccentric shaft. When the moving jaw plate rises, the angle between the fixed jaw plate and the movable jaw plate gets larger, and the materials can be crushed to reach the crushing target. When then moving jaw plate is down, the angel between the moving jaw plate and fixed jaw plate becomes smaller. The movable jaw plate leaves the fixed jaw plate under the effection of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity. In bulk or container.
Working principle of impact crusher: When the impact crusher works, the motor drives the rotor rotate of the impact crusher with high speed, on the rotor where installed the hammers. When the materials get into the area which the hammers effect, under the impacting function of the hammer at a high speed, the materials are thrown to the impact device above the rotor continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being refreshed. The materials from large size to small size, all of them can be crushed at the impact chamber repeatedly until the material are crushed to the required size and then discharged from outlet of the impact crusher Characteristics of impact crusher: Special structure, connected without key, high chrome hammer, unique impact liner, dealing with hard material, high efficiency and saving energy, cubic shape of product, adjustable output size. In bulk or container.
The hammer crusher (hammer mill) has good quality features like simple structure, high reduction ration, high efficiency, and etc. The pc hammer crusher (hammer mill) is suitable for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries. Operating principle of hammer crusher: The motor drives the rotor rotated of the hammer crusher at a high speed through the belt, and on the rotor there are series of hammers. When the materials get into the working chamber of hammers, they are crushed by the rotating hammers with high rotation speed, the products which are crushed to meet the required size can be discharged by the outlet and become the final products, while the large size products are brought back to the crushed area by the hammers for being recrushed until they reached the required size. In bulk or container.
The spring safety system works as an overloading protection system which allows metals to pass through the crushing chamber so as not to damage cone crusher. The safety system adopts dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to ensure reliable performance. The crushing chambers are depending upon the feeding size and the fineness of final products. The standard type(pyb) is applied to medium crushing; the medium type is applied to medium or fine crushing; and short head type is applied to fine crushing. In bulk or container.
The series of 2-roller crusher can be applied in industrial sectors such as ore crushing ,chemical industry, cement, refractory, abrasive and construction industries to break ores and stones of high and medium rigidities, and particularly applied in the building material industry to produce pisolitr and pea gravel, which is with better effect than ordinary crushers. This series crusher has good characteristics like reliable working, simple maintenance, low operating cost and adjustable marking granularity. In bulk or container.
1). Cast iron rolls: Alloy chilled cast iron rolls. Alloy indefinite chilled cast iron rolls. Spheroidal graphite cast iron rolls (sga bainite nodular , sgp pearlite nodular )(centrifugal). High chrome cast iron rolls (centrifugal). 2). Cast steel rolls: Alloy cast steel rolls. Adamite steel rolls. Centrigugal casting hi-carbon adamite steel rolls. Graphite steel rolls. High speed steel rolls. High chrome casting steel rolls. Metal pallet, wooden pallet box.
The high-CR cast iron rolls are made by centrifugal casting process, the working layer contains12-22% chromium, through rational chemical composition allocations and different heat treatments, the martrix can be controlled as sorbite, troostite, bainite or martensite and certain kinds of carbides, such as CR7, C3 eutectic carbides, CR23C6 second carbides, MO2C carbides. According to different purpose of use, the material of the core could be nodular iron or grey iron. Metal pallet, wooden pallet box.
The graphitic steel rolls have a metallographic structure consisting of carbides and a small amount of graphites in the pearlitic martrix. The rolls of this material has better tensile strength and better resistance to thermal cracking than adamite rolls of the same hardness, and the wear resistance of which is better than the cast steel rolls. Metal pallet, wooden pallet box.
Alloy cast steel roll is manufactured with high quality steel molten by arc furnace, due to the advanced casting and thermal treatment technique, such roll is of very high intensity. Owing to its excellent performances of anti-heat crack, tenacity and wear-resistance, it is appropriate to be used for rough and intermediate shape steel rolling machine , heat rolling strip steel rough rolling machine stand and used as back-up-roll for heat rolling strip steel. Its metallographic structure is made of pearlite or temper sorbite. Metal pallet, wooden pallet box.
Capacity: 5-2000l Material: stainless steel SUS304 or SUS316L Stirrer speed: 0-120rpm Homogenizer speed: 0-2900RPM. Wooden box.
Capacity: 5-2000L Material: stainless steel SUS304 or SUS316L Stirrer speed:0-120rpm Homogenizer speed: 0-2900RPM. Wooden box.
Main Technical specifications: Description Specifications Unit Rated power 175 kw/h Overall dimension L, W, H 9000, 2990, 3650 mm Max. lifting height Forks at level 3450 mm Take back forks 3750 Operating weight 30000 kg Max. Limited Load 25000 kg Bucket capacity 2.7 m3 Dimensions of fork L, W, H 1400, 250, 110 mm Distance of fork 1350 mm Rated loading capacity 25000 kg Turning angle 35 Turning radius 7735 mm Wheel base 3700 mm Tread 2300 mm Min. Ground clearance 430 mm Unloading angle 18 Haul location height Ground clearance of material 300 mm Fuel tank capacity 380 L Hydraulic fuel tank capacity 380 L Specification of tyre Front wheel Advance¡± high-load three stars 26.5 steel wire tires(tire load more than 60 tons) Rear wheel Advance¡± 26.5 strengthening tires. Packing in container with disassembles some parts or by RO-RO ship.
TEAC FD-05HG 5661-U5 1.44MB Internal SCSI Floppy Drive (FD-05HG / FD-05HG5661 / FD05HG-5661 / FD05HG / FD05HG5661) FD-05HG-5661. Detailed Product Description : TEAC FD-05HG 5661-U5 1.44MB Internal SCSI Floppy Drive (FD-05HG / FD-05HG5661 / FD05HG-5661 / FD05HG / FD05HG5661) FD-05HG-5661 Products Status Stock Application Desktop, Laptop Type Internal Interface Type FDD Brand Name TEAC Model Number TEAC FD-05HG 5661-U5 Place of Origin Thailand Customs HS codes 84717020.00 RATE 500KB / s (1.6/2M mode) Capacity 1.44M/1.28M/720K/520K/280K/100M/732K Floppy authentication Australia SA Germany TuV UL CE Size 101.6*145*25.4 Packaging 40pcs/box Rotation speed 300/360min-1 MTBF 30 000POH or more Mass(Waight) 246g typ. Manufacturers set up keyword manufacturers factory & production factories free shipping . TEAC FD-235F Series Model: TEAC FD-235F 3139 TEAC FD-235F 3405 TEAC FD-235F 3435 TEAC FD-235F 4139 TEAC FD-235F 3264 TEAC FD-235F 3173 TEAC FD-235F 3975-00 720K TEAC FD-235F 3100-U TEAC FD-235F 100-U TEAC FD-235F 246-U TEAC FD-235F 4112 TEAC FD-235F 4405 TEAC FD-235F 3198 TEAC FD-235F 4161 TEAC FD-235F 4665 TEAC FD-235F 198 TEAC FD-235F 3100-U TEAC FD-235F 3112-U TEAC FD-235F 3405-U TEAC FD-235F 4112-U TEAC FD-235F 4405-U Features & Specifications: Media Support: 1.44MB Form Factor: 3.5 1/3H Internal Interfaces/Ports: 1 x 34-pin IDC Floppy Disk(s) Standard Warranty: 1 Year(s) Limited Data Transfer Rate: 62.5KBps External Dimensions: 1 Height x 4 Width x 5.7 Depth Storage Capacity: 1.44MB Access Time: 94 ms Average Weight: 0.7 lb Product Type: Floppy Drive Product Content: TEAC FD-05HG 5661-U5 DRIVE MANUFACTURERS SELL FACTORY ORIGINAL PURCHASE INFORMATION FREE TRANSPORTATION - SOFTWARE NOT INCLUDED - Before you purchase this item, please ensure that you have verified compatibility with system by visiting the manufacturer's web site. We assume no responsibility and will not accept full refunds for items purchased that are not compatible with your system configuration. Conditions:New - Condition Chart Warranty: 90 Day Availability: Contact us for availability. TEAC FD-05HG 5661-U5 DRIVE MANUFACTURERS SELL FACTORY ORIGINAL PURCHASE INFORMATION FREE TRANSPORTATION Disk Size 3.5inch micro floppy disk Interface SCSI (ANSI X3.131-1986)floppy drive interface pin 34 50 Data Transfer Rate 500/250kbits/sec. Average Random Access Time 94msec. Rotation speed 300/360min-1 Data Buffer 31KB Ambient Temperatures Operating 5oC to 51.7oC Relative Humidities Operating 20% to 80%(non-condensing) The maximum wet-bulb temp. is 29.4oC or less Power Requiremtnts DC+5V¡À5% MTBF 30,000POH or more Safty Standard and EMC Standard UL, CSA and TUV Dimensions(W, H, D) 101.6mm, 25.4mm, 144.5mm Mass(Waight) 246g typ. Disk Size: 3.5inch micro floppy disk Interface: SCSI (ANSI X3.131-1986) floppy drive interface pin 34 floppy drive interface pin 50 Data Transfer Rate: 500/250kbits/sec (1.6/2M mode) Average Random Access Time: 94msec. Rotation speed: 300/360min-1 Data Buffer: 31KB Ambient Temperatures Operating: 5oC to 51.7oC Relative Humidities Operating: 20% to 80%(non-condensing)The maximum wet-bulb temp. is 29.4oC or less Power Requiremtnts: DC+5V¡À5% MTBF: 30,000POH or more Safty Standard and EMC Standard: UL,CE,CSA,TUV Dimensions(W, H, D): 101.6mm, 25.4mm, 144.5mm Mass(Waight): 246g typ. Manufacturers set up keyword: manufacturers factory & production factories, free shipping Payment:Paypal, wire transfers, letters of credit at sight Packaging: 30 units per box Packaging: 600 units per pallette Packaging: 100 units per container Warranty: 14 days from the receipt of goods. Guaranteed against DOA and defect. Products Status Stock : Application Desktop, Laptop Type Internal Interface Type FDD Brand Name TEAC Model Number TEAC FD-05HG 5661-U5 Place of Origin Thailand Customs HS codes 84717020.00 RATE 500KB / s (1.6/2M mode) Capacity 1.44M/1.28M/720K/520K/280K/100M/732K Floppy authentication Australia SA Germany TuV UL CE Size 101.6*145*25.4 Packaging 40pcs/box Rotation speed 300/360min-1 MTBF 30 000POH or more Mass(Waight) 246g typ. Manufacturers set up keyword manufacturers factory & production factories free shipping.
Products Status: Stock Application: Desktop, Laptop Type: Internal Interface Type: FDD Brand Name: TEAC Model Number: MF355H-394MV Place of Origin: Thailand Customs HS codes: 84717020.00 RATE: 500KB / s (1.6/2M mode) Capacity: 1.44M/1.28M/720K/520K/280K/100M/732K Floppy authentication: Australia SA Germany TuV UL CE Size: 101.6*145*25.4 Packaging: 40pcs/box Rotation speed: 300/360min-1 MTBF: 30 000POH or more Mass(Waight): 246g typ. Manufacturers set up keyword: manufacturers factory & production factories free shipping Features & Specifications: Media Support: 1.44MB Form Factor: 3.5 1/3H Internal Interfaces/Ports: 1 x 34-pin IDC Floppy Disk(s) Standard Warranty: 1 Year(s) Limited Data Transfer Rate: 62.5KBps External Dimensions: 1 Height x 4 Width x 5.7 Depth Storage Capacity: 1.44MB Access Time: 94 ms Average Weight: 0.7 lb Product Type: Floppy Drive Disk Size: 3.5inch micro floppy disk Interface: SCSI (ANSI X3.131-1986) floppy drive interface pin 34 floppy drive interface pin 50 Data Transfer Rate: 500/250kbits/sec (1.6/2M mode) Average Random Access Time: 94msec. Rotation speed: 300/360min-1 Data Buffer: 31KB Ambient Temperatures Operating: 5oC to 51.7oC Relative Humidities Operating: 20% to 80%(non-condensing)The maximum wet-bulb temp. is 29.4oC or less Power Requiremtnts: DC+5V5% MTBF: 30,000POH or more Safty Standard and EMC Standard: UL,CE,CSA,TUV Dimensions(W, H, D): 101.6mm, 25.4mm, 144.5mm Mass(Waight): 246g typ. Manufacturers set up keyword: manufacturers factory & production factories, free shipping Payment:Paypal, wire transfers, letters of credit at sight Packaging: 30 units per box Packaging: 600 units per pallette Packaging: 100 units per container Warranty: 14 days from the receipt of goods. Guaranteed against DOA and defect.
AC:100-240V 50/60HZ Power:25W. Color box size;28.5*13.5*31cm G.W:1.85kg.
Voltage:100-240V Frequency:50/60HZ Output:24V Power:25W 3500-5000 rotation/minute. 1pcs/1 color box 10 color boxes/carton color box size:28.5*13.5*31cm color box G.W:2.3KG carton size:59*57*33cm carton G.W:20.2KG.