Overview Base Mounted Jib Cranes have a heavy wall structural steel pipe mast and a reinforced large diameter base plate for minimal deflection and continuous alignment. Durable and long lasting overhead floor cranes feature a rolled steel I-beam section with tapered flange for smooth trolley travel. Safety end stops at both ends of boom limit trolley travel. Light Duty Cranes are used for hand chain or light duty electric hoists Product Advantage -Special designed reducer for reliable performance -Box girder (for bigger capacity) gives safety factors -Easy installation and maintenance -Limit switch for rotation, trolley and hoisting -Special painting material for outside yard -Special rotation designing for winding area (need to be clarified)
Single gantry crane is a cost-effective alternative wherever the installation of bridge cranes is impractical due to a need for a raised runway structure. They are also an ideal supplement to bridge cranes at the workstation level. It can lower
Crane wheels are replaced because of flange wear, flange breakage, and mechanical overloads characterized by pitting and spalling. Each of factors in-service must be carefully considered before the combination of wheel design,
Crane hook is the most common hook device in the crane machinery. Hook hangs on the wire rope of the lifting mechanism with the help of pulleys such parts,hook is the most widely used among the load handling device. It has
Our end trucks are high quality components, designed for reliability and economy. The steel structure of the end truck is a torsion-resistant box girder, prepared to be connected to the crane girder. Precise machining and exact alignment of
Wall mounted Jib crane is a new generation of the hoist equipment developed to meet the requirement of modernized production. It is wall mounted type, especially applicable to short-distance, frequent and intensive hoisting operations, with such features as high efficiency, energy frugal, labor saving, occupying less space, easy operating and maintenance, etc. This jib crane doesn't require modification of the building structure in which it is being installed and it doesn't take up much space, but it allows transporting goods on a three-dimensional plane. With this type of hoisting equipment, the smooth operation of the production line will be ensured. Features â?�Simple installation-Wall mounted jib cranes can be mounted on wall, no special floor space required. â?�Shorten loading time, improve work efficiency-With a jib crane, workers can lift, quickly transport and precisely deposit all kinds of work pieces at any time. â?�Easy handling, lighten laboring work-It can relieve the strain of physically demanding work on your staff. The risk of injuries or accidents when handling heavy or unwieldy parts is considerably reduced. url:http://www.fwcranes.com
Electric Chain Hoist
Electric winch is a newly developed product with a planetary gearbox. Now it is an ideal replacement of traditional electric winch because of its compact structure, low noise, stable performance and easy operation and maintenance. It
1. Demonstration control experiment of reach stacker machinery 1) For snatch operations, the snatch beam is positioned according to the length of the container; 1) For lifting operations, the main boom and the telescopic boom are combined for work experiments; 2) Swivel operation, lifting the beam while lifting the platform while the platform is rotating; (with motor rotating platform) 3) Obstacle operation, when the main boom and the telescopic boom are combined work, the servo cylinder on the top of the telescopic boom or the four obstacle detection cylinders distributed at the four corners of the grab beam will give the main system a stop or descend command (optional) when it encounters an obstacle; 4) Return, the platform rotates, the main boom and the telescopic boom cooperate to return to the initial position. 2. Programmable controller (PLC) electrical control experiment: machine-electric-hydraulic integrated control experiment. 1) PLC instruction programming, ladder diagram programming learning; 2) Learning and using PLC programming software; 3) Communication and online debugging between PLC and computer; 4) The application of PLC in hydraulic drive control and the optimization of control schemes.
Gantry cranes and overhead cranes.
Hoist, crane and overhead crane.
Gantry crane, overhead crane.
1. Application range of twin shaft forced mixer Js concrete mixer belongs to forced concrete mixer with double horizontal shaft. It is applicable to middle and small concrete prefabricate component company and industry and civil building engineering such as highroad, bridge, water conservancy, port and dock etc. It can stir hard concrete, plastic concrete, fluidity concrete, lightweight aggregate concrete and mortars. It not only can be used as the single machine, but also can work together with pld burden machine to make up the facility concrete batching plant. Js series concrete mixer has many advantages such as stirred uniformly, compact structure, good shape, smooth running, convenient operation and short cycle time. 2. Main features and advantages of twin shaft forced mixer the liner of stirring vane material is alloy material with ferromanganese, ferrochrome and ferrovanadium etc which is very wearable. It can stir 50, 000 cube meter material. the speed of mixing is very quick and high efficiency the hydraulic system controls the discharging which is safe and reliable. the strength of spiral stirring arm is very high. 3. Main technical parameters of twin shaft forced mixer Product modelJs1000 Feeding capacity Discharge capacity Productivity Max material radius(mm)60/80 Matched power kw)59.1 Overall dimensions(mm)5650 Total mass (kg)9000 Packing: nude packing or container Min order: 5 sets Delivery period: 30 days Payment: t/t, 100% irrevocable l/c at sight
Overhead crane, gantry crane.
Hoist and trolley, overhead crane.
Lifting capacity(t):5t 10t 16/3.2t 20/5t 32/5t 50/10t Working duty:A5-A6 Span(m):18m 22m 26m 30m 35m Lifting height(m):10m 11m, 12m Lifting speed(m/min):2.9-11.4 m/min Power supply:380V 50HZ 3PHS(or according to your demand) Electricals and other parts are packed by high quality plywood crates, Main beam packaged by plastic film and woven plastic cloth.
Gantry cranes and overhead cranes.
This product is widely used in plants ,warehouses,material stocks to lift goods ,It is prohibited to use the equipment in the combustible ,explosiveor corrosives environment. Atahis product hac two operational methods,ground or operational room which has open model and closed model and can be installed on the left or right side according to the practical situation .And the direction of entering the gate has two forms, sideway and ends in order to satisfy the users choice under different conditions.
Used construction machinery, excavators, dozers, cranes, backhoe loaders, access platforms, boom lifts, dumpers, telescopic handlers.
Overhead cranes, LED lights.
