Â· Manufacturer: Hitachi Plant Mechanics Â· Year: 2017 Â· Model: Overhead Crane Hoists Â· Rated load: 20 t Test: 25 t Â· Lifting load: 20.28 t Â· Lift: 18.495 m (FL plus 10.995 m, FL minus 7.5 m) Â· Span: 28.7 m Â· Winding: 0.125 m / s , 30 kw (inverter control) Â· Traverse: 0.3 m / s , 1.8 kw (inverter control) Â· Driving: 0.75 m / s , 2 x 5.5 kw (inverter control) Â· Power supply: 3-phase, 3 wire, 440 v, 60 Hz Â· Traverse rail: 22 kg / m rail Â· Traveling rail: 73 kg / m rail We could offer you another crane with similar specifications.
Depending on the intensive understanding and experience in heavy lifting and material handling industry, tolian creatively provide safety and high quality solution to customers. Tolian made overhead cranes are accepted by customers in the field of related industry.
Overhead crane with up-down, left-right, forward-backward devices The packing details changes from different crane dimensions
Explosion-proof capacity of all the motors and electric equiment accord with gb3836.2-2000.The qb 5~50/10t double beam explosion proof overhead crane has passed the experiment of the national supervision and the performances accord with jb/t5897-1991. The explosion-proof mark are exdiibt4, exdiict4.Qb overhead explosion-proof crane with hook is applicable to the workshops where the explosion-conduction is lower than 2b or 2c, burning point is highter than t4, and is applicable to section 1 or 2 ( for more details, please check gb3836.1-2000)this tyble is generally controlled on the gound, but can be cab-operated when needed. The work classification is interdict.The crane has obtained explosion-proof certificate after passing examinations by units designated by the government to test explosion-proof products. The explosion-proof marks exd ii bt4 and exd ii ct4 respectively. This qb 5~50/10t double beam explosion proof overhead crane is generally controlled on the ground, but control from the driver's cabin also allowable. The working grade is intermediate. Specifications Wooden box for electrics, plastic cloth for steel structure
Industrial Crane Konecranes CTX 10 t, Dual Bridge with 33.6 m span The crane was manufactured by Konecranes Oyj in 2001 and the operation was stopped in year 2006. The equipment was regularly serviced by the manufacturer and is thus in excellent operating condition. The crane is still installed in its original place and can be tested on any time. The double bridge is welded housing construction equipped with one double speed wire hoists and a motorized rail equipment on both ends. The crane has both the local wire connected control unit as well as the wireless remote controller. On the bridge there is a service platform and the local LV û and control cabinet. All electric motors are dimensioned in accordance with Industrial Heavy Duty ED classification. The equipment includes the crane moving rail which will be sold separately. Technical data: Manufacturer's type:CXTD10t x 33.6m Hol: 6.1m Lifting capacity:10 000 kg Span distance:33.55 m Lifting class:FEM M5 (2m) Bridge structure:Welded case Total weight:Approx 22 000 kg Type of wire hoist:XL 404N40BDA4 Lifting height:6.1 m Lifting speeds:8.0 and 1.3 m / min Wire hoist speeds:32 and 8 m / min Bridge speed:Inverter controlled, max 40 m / min Wire hoist lifting motor:Double power 15 and 2.5 kW (60% ED) Wire hoist moving motors:2 x 0.65 kW (40% ED) Bridge moving motors:2 x 1.8 kW (40% ED) Total power need:19.9 kW / 400 V / 50 Hz Crane moving rail:60 x 40 cm, length 2 x 140 m.
Single Girder Overhead Cranes are designed with high configuration, which is developed with advanced design technology referring to European FEM standard. Cranes are mainly made up by main beams, end beams, trolleys,
1)brief specification Lifting capacity: 30t Span: 10.5m-31.5m (non-standard design can be made) Working class: a5~a6 Working temperature: -25c to ~40c Voltage : 380v 50hz 3-phase 2)structure The magnet overhead crane has slewing telescopic electromagnetic carrier beam; is applicable to th fixed span at indoors or outdoors of steel mill shipyard port yard and storage etc. The magnet overhead crane is used for loading unloading and carrying steel plate, profile steel, and spool etc, the magnet overhead crane is especially applicable to lift material of different specifications and which needs horizontal rotation. The spacing of electromagnet can be adjusted electrically and magnetic force of electromagnet can be adjusted through infinitely variable control according to the specifications(different thickness, length and pieces, etc) and eight of the lifted materials the followings can be supplied according to the users requirements: speed governing(1: 10or larger) of the mechanisms, overload& warning, remote control, plc control, failure detection, display, record and printing system etc, (the data below is used for indoor) Safety features: Overload protection: if the materials or electric current overstep the capacity, the crane will give a sharp warning for protection itself. Emergency brake: if theres emergency situation, it could stop the crane to protect operator and goods. Control method: room control or remote control to avoid any injure to the operation staff. Main lifting motor: with thermal protection and currency protection. Hooks with latch:to prevent goods fall down;
High Quality Single Grider Bridge Crane Overhead Crane With Best Price LDA type crane is the most popular crane for workshop. It is designed and manufacturing on the basis of LD type crane which has more reasonable structure and lighter in weight. This crane belongs to light duty crane, can be used with CD1 and MD1 hoist. Lift capacity is from 1 ton to 16 tons, suitable for 7.5m to 28.5m. It works indoor under the temperature -25°C to +40°C, humidity not more than 85% (ambient temp is 25°C). Its working condition is A3-A5.This type crane is commonly used in mechanical production workshops, assembling production line, warehouse and cargo yard, forbid to be used in humidity over 85%,corrosive and explosive places. It cannot be used to handle melting metals and toxic, flammable dangerous materials. Controlling can be ground operation or cabinet operation, the cabinet divided into close one and open one, it can be installed at the left or right side up to different conditions.
he LDA single girder overhead crane is comprised of main beam, end carriage, electric hoist, electric power transmission device and cab. Electric hoist,electricals and other parts are packed by high quality plywood crates, Main beam packed by plastic film and plastic woven cloth.
Feature: bridge crane condition: new Application: widely used for all kinds of work yard rated Loading capacity: 1t, 2t, 3t, 5t, 8t, 10t, 12t, 16t, 20t Rated lifting moment: as desingn Max. Lifting load: 20ton max. Lifting height: 18m span: 7.5-31.5m place of origin: henan, china brand name: jinrui model number: ld/ldp/lx/hd certification: ce iso gost Warranty: one year after-sales Service provided: engineers available to service machinery overseas Other country: henan, china (mainland) Voltage: 380v, 50hz, 3-phase ac or as request Temperature: -25 Working class: a3-a5 Girder structure: truss or box type Color: according to your demands Custom design: available Export markets: all over the world
Double Girder Overhead Crane Double Girder European Overhead crane is based on advanced technology and international standard: FEM (Europe), DIN (Germany), ISO(International), is the renewed product, is an intelligent crane. Its structure is much more reasonable and its assemble is more superior. The limiting size is the lowest between the top of crab and the track of trolley, reduces 20%-30% compared to traditional Double Girder Overhead crane, and can reduce the capital of workshop 20% efficiently. It has hard-tooth reducer, imported wire-rope, trinity drive. It is equipped with such protecting devices as alarm device to overloading, obliquely hanging, second protecting equipment preventing hook clashing, current phase protection, etc. the electric appliance adjusts speed without contact or spark module, and fulfill converter function, including mini-speed and double speed, which make traveling and lifting very steady. Double Girder European Overhead crane lifting capacity is from 5t to 500t, span is 10.5~31.5m, work environment is -10 to 40 degree, working duties are A5-A6. Must not use for lifting blazing & melting metal, toxicant, explosion-proof or other dangerous material. 1) capacity: 5T-50/10T. 2) span: 10.5m-31.5m. 3) Lifting height: 3-60m 4) Working grade: A5, A6 5) Remote or Cabin Control 6) Lifting speed: 0.1-8m/min 7) Cross travelling speed: 2-30m/min 8) Long travelling speed: 2-45m/mim Double Girder Gantry Crane Feature * Small dimension, light dead weight, small wheel pressure * Lifting limiting distance is minimum from hook to floor, lowest headroom, lifting height more higher, increases work efficiency * New workshops can be designed more smaller, save a amount of money from initial construction investment * Strong rigidity, light dead weight, low power, outstanding structure * Applicable to the transfer, assembly, check, repair, load and unload at mechanic processing workshop, subsidiary workshop of metallurgical mills, warehouses, goods yard and power station. * Spreader optional, hook, grab bucket, magnet chuck and so on. * Schneider electrical, ABM/Nord / SEW triple gear motor * Galvanized high strength wire rope * Self-adjusted disk brake, hard tooth reducer
Production description European single girder overhead cranes have such design concepts as small dimension, light weight, energy-conservation and environment protection. Compared with traditional cranes, the limiting distance is minimum from hook to wall, and headroom is the lowest, which makes cranes work more close to the front, and lifting height higher that increases effective working space of workplace, are widely used in machinery production, assembling, petrochemicals, electric power, construction, paper making, railways building, etc. Safety & Mechanical Features 1.European single girder overhead crane is compact lifting machinery designed and manufacturing in the strict according with FEM, DIN and ICE standard, compared with general overhead crane (bridge crane), weight is reduced by about 15-30% of common crane, max wheel pressure is reduced by about 10-30%. Have less requirement to the workshop structure, reduce production cost. 2.The frame of crane beam is square box frame, it is made by Q235 or Q345 steel plate, it has smaller body to get more lifting space. 3.Motor adopts Insulation grade F, protective grade IP54, it shall also have over heated and alarming function, the motor cover adopts aluminum alloy to drawing the molding, with better heat dissipation. 4.Germany reducer, Harden face gear, improve the bearing ability, better sealing of the shell, ensure there no grease penetration 5.Bridge crane wheel assembly are technically advanced and successfully used in different industries like steel plant, rolling mill, cement plant, fertilizer plant, paper mill, chemical industries, etc. Wheel material: ZG430-640 cast steel, 60#, 65$ 65Mn, 42CrMo, 45# or according to your demand. 6.Main electric elements adopts the international brands include Schneider, Siemens, ABB. The protective grade of electric control box shall not less than IP54. 7.This overhead crane(bridge crane) has several safe protection functions, such as up/down limit switch, overload protection, low-voltage protection and long traveling limit switch, and the cross and long traveling motors have soft start function, the crane is very easy to use. 8.This overhead crane(bridge crane) is widely used in plants, warehouses, material stocks to lift goods. It is prohibited to use the equipment in the combustible, explosive to corrosives environment. 9.The all motions of this overhead crane are double speeds, the lifting motor is double speed type, the cross traveling motor and long traveling motor are controlled by frequency inverter.
Feature 1.Light weight, large load, strong wind resistance and so on. 2.Reasonable structure and favorable performance. 3.Smooth starting and stopping. 4.Safe and reliable traveling, long life. 5.Low noise, commodious cabin with good view. 6.High quality automatic welding and NDT inspection 7.Designed according to your requires Description QD model double girder bridge overhead crane is composed of box type bridge frame, lifting trolley, crane traveling mechanism, and electrical system. It is rely on the bridge frame along the workshop orbital direction moving longitudinal, the trolley along the main beam direction moving transverse and the hook lifting movement to work. The double girder bridge overhead crane with a hook, have only a set of lifting mechanism. More than 16/3.2 tons of double girder overhead crane with two hooks, it has two independent sets of hoisting mechanism. The main hook used to lift heavy objects, the auxiliary hook lift light objects, in which the rated load range can also be used for collaborative main hook tilting or tipping the material. But must pay attention, do not allow the two hooks lift two goods at the same time. If the two hooks work together, the weight of the object will not exceed the rated lifting weight of the main hook. Double girder bridge overhead crane allocation hook used in machining, assembly workshop, metal workshop, metallurgy and casting workshop and warehouse handling work; allocation of grab is suitable for metallurgy, cement, chemical or open fixed span in bulk material handling.
Ld single girder overhead crane is widely used in various places such as factory, warehouse, stuff yard to lift goods, forbidden to use in flammable, explosive and corrosive environment. The girder and end beam of overhead crane are connected together by high strength bolts to ensure the structure strength and precision of the whole machine. The end beams of this bridge traveling crane are equipped with flat wheel or double rim wheels, anti-friction bearings, buffer blocks and derailment preventing end plate. The maintenance walkway of ld single girder overhead crane is located on one side of the main girder, consisting of flower pattern plate, 1050 meters handrail. Lifting capacity: 1~20 t Span length: 7.5~28.5 m Lifting height: 6~18 m Lifting speed: single/double/variable speed Working class: a3, a4 Ambient temperature: -20~40 degree
Features of product as follows: Model LD electric Single -girder Overhead Crane is widely used in machine\ processing ,assembly workshop ,metallurgy ,casting workshop and warehouse ,etc,for loading and unloading the goods .The configuration grap can be used in metallurgy ,cement ,chemical industry and in the open air for loading and unloading the granular items with fixed span. The Technical Data : Lifting capacity (Ton) / / 1/2/3/5/10/16/20 Span (M) 7.5-22.5 Mechanism travelling Motor Speed (m/min) 10/ 20/ 30 45/60 Type ZDY21-4 ZDR12-4 Power (kw) 2*0.8 2*1.5 Speed (r/min) 1380 1380 Electric Hoist Model CD1/MD1 Lifting height(m) 6/9/12/18/24/30 Lifting speed(min) 8(7);8/0.8(7/0.7) Traversing speed(m/min) 20/30 Work Classfication / / A3-A5 Power supplier (V ;Hz) / / 200V-600V;50Hz Dia of wheel(mm) ø300 Recemend mended rail / / P18/P22/P24/P30 The advantages: 1.Safety but efficiency 2.Simple control but durable 3.More favourable price ,No the third party 4.Be available according your requirement 5.Be available with more capacity :1T-100T KF CRANE is a professional production of heavy overhead crane manufacturer, overhead crane was hung in workshops, warehouses and material lifting field empty for material lifting equipment. Because of its ends situated in the tall concrete pillars or metal stent, shaped like a bridge.
10t single girder overhead crane is used to handle materials and small articles in workshop and factory. lifting capacity: 10t span: 25m lifting height: 6m crane moving speed: 20m/min electric hoist lifting speed: 7m/min electric hoist moving speed: 20m/min Packing: container Min order: 2 sets
Single Beam Overhead Crane LDA model single beam overhead crane is improved and designed on the basis of LD model. It is characterized by more reasonable structure and higher strength steel as a whole. Used together with CD1 model, MD1 model, HC model electric hoist as a complete set, It is one kind of light duty crane with a capacity of 0.25 to 30 tons. The standard span is 7.5-31.5m. working grade is A3-A5. Standard working temperature is -25 to 40 centigrade. This product is widely used in plants, warehouses, material stocks to lift goods or materials. It is prohibited to use the equipmenmt in the combustible, explosive to corrosives environment.
QD Type double beam overhead crane is applied in open warehouse or rail sideways to conduct common loading unloading and material handling works. This crane is composed of bridge,travelling mechanism, trolley, electric equipment. Bridge adopts box welded structure, crane travelling mechanism adopts separate drive. All mechanism are controlled in driver's cab. Power supply adopts cable festoon and sliding wire, select one when ordering. Capcaty: 5T, 10T, 16/3.2T, 20/5T, 32/5T, 50/10T, 75/20T, 100/20T, 100/30T, 125/30T, 150/30T, 160/32T, 200/50T, 400/80T, 550/250T. Packaged by woven plastic cloth, electricals packed and other parts packed by high quality plywood crate.