Washable, breathable and fashionable orthopedic casts and splints 10, 000 sets
We are offering orthopedic operating table, Albee’s type orthopaedic attachment :- Ortho attachment allows the table to be used for the lower extremity procedures. Available at competitive prices our ortho attachment is purely made of stainless steel which resist corrosion. Features : This orthopedic extension device can be used with any operating table as it independently stands on the floor. Specially design for intra operative x-ray photos & image intensifier set use.In addition, a pelvic support plate is supported on top of the frame and is formed with an asymmetrical construction. The pelvic support plate includes a cutout area on a front corner thereof permitting additional access to the affected leg of a patient. Removable pelvic rest & x-ray translucent pelvic stemstirring instruments allows flexionraising of legs & stirringstring ball joints locked from foot end.Two traction devices on sliding spot with ball joint allowing flexions & rotations of foot with traction shoe with metallic sole. Padded orthopedic knee crutchesprovides support to the legs of the patient.Traction unit with supporter is so easily & collapsible that it requires a very small place.The plate may be flipped over to position the cutout area on the opposite side of the patient, depending on the location of the affected leg. Each piece is packed in plywood case.
Material: fiberglass and water-activated polyurethane. Application area: mainly used for the external fixation of fracture and common orthopedics. Model No.: AX002 (5cm*360cm) Size: standard or customized Package: 10bags*12boxes/ctn Characteristics: 1. High Strength and Light Weight. 2. Quick Solidifying and Good Mouldability. 3. Easy Operating. 4. Excellent X-ray Radiolucency. 5. Good Air-permeability. 6. Water-resistant. 7. Environment Friendly Materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.120kg
Material: fiberglass Application area: mainly used for the external fixation of fracture and common orthopedics. Model no.: ax005 (12.5cm*360cm) Size: standard or customized Package: 10bags*9boxes/ctn Characteristics: 1. High strength and light weight. 2. Quick solidifying and good mouldability. 3. Easy operating. 4. Excellent x-ray radiolucency. 5. Good air-permeability. 6. Water-resistant. 7. Environment friendly materials. Operation: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify. Storge: Be careful not to break the package Storage at room temperature The shelf-lift: 2 years Unit weight: 0.280kg
Ansen casting tape consists of knitted fiberglass fabric and polyester fabric. It has the advantages of excellent x-ray permissibility, light weight, high strength, air-permeability, water resistance, comfort, hygienic and neat appearance to patients. Apply to orthopedics department, for connecting fracture part, fix swelling part or injured joint. We have various size and color for choose. 10bags/box, 12boxes/ctn, The carton dimension is 65*41*40cm
Ansen fiberglass splint consists of knitted fiberglass fabric and polyethylene glycol. It has the advantages of excellent x-ray permissibility, light weight, high strength, air-permeability, water resistance, comfort, hygienic and neat appearance to patients. Apply to orthopedics department, for connecting fracture part, fix swelling part or injured joint. 5/10/20bags/box, 6boxes/ctn, The box dimension is 65*41*40cm
316 l medical grade steel Interlocking nails Austin moore Bipolar , thr Trauma range Bio fixation plates External fixatures Pins , wires & instruments. Differs from implants to implants
Back supports various designs from trochanter belt to dorsal lumbar. 100 units 80 pounds Four boxes 30x20x20.
Orthopedic screws, plates, locking plates, intramedullary nails, prosthesis, wires, pins etc.
As per ao standerd (original ao/asif)
Orthopedic casting tape Enriched with polyurathane resin, our casting tape have good weight bearing strength & 3-4 min setting time, tact free roll down & smoothest finish. It is dipped in water, squeezed and applied for immoblization. Commonly used by orthopedic doctors. 12 - pieces packed in a small inner box. For small sizes. 10 - pieces packed in a small inner box, for 5". Outer/bigger box contains 10 small/inner boxes.
Product Name Orthopedic Cast Padding Material Polyester/Cotton Gram weight 70g/m2, 75g/m2, 80g/m2 Different Width 5cm, 7.5cm, 10cm, 15cm, 20cm Different Length 3y, 4y, 5y Packing individually packed in cellophane
Orthopedic Bone Drill Power Tool
G&W is a company which produces all Cast & Splint applied to orthopedic surgery, and broadened its ground in the market by developing GR CAST & GR SPLINT for several researches & developments which are substantially different to the existing cast. Alpha Cast is the orthopedic fixed tape to make broken bones or damaged muscles cured by molding in the right position. -
- Cement dispenser (PCD system) < component > 1.wire pin 2. Cannular & expander 3. 1st VP needle 4.spacer 5. 3rd cement filler & pusher 6. 2nd cement filler & pusher 7. 1st cement filler & pusher
Orthopedic Pin Cutter Jamboo Cutter
Orthopedic Casting Tape Color Various Casting Tape Meet ISO 13485, CE, FDA This product is made of knitted fiberglass fabric or polyester fabric, and water-activated polyurethane resin. It uses environment friendly materials, and mainly used for the external fixation of fracture and common orthopedics. This product has many advantages comparing with plaster bandage. It is the upgraded and replaced product of the traditional plaster bandage. Fiberglass Casting Tape has higher strength and is easier to be cut than Polyester Casting Tape. Polyester Casting Tape can be burnt thoroughly, so it is more environmentally friendly. How to use: 1. Wear the gloves and choose the proper specifications. 2. Use the cast padding or stockinet on the fixed part. 3. Open a bag and take out the cast, DIP in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water. 4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position. 5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength. 6. Use the electric cast saw to cut and remove it. Characteristics: High Strength. Light Weight. Quick Solidifying and Good Mouldability. Easy Operating. Excellent X-ray Radiolucency. Good Air-permeability. Water-resistant. Environment Friendly Materials. Clean and Comfort. Notes: 1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin. 2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength. 3. The cast need to be cut and removed by the electric cast saw. 4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
is helpful in providing comfortable immobilisation to the lower back. It is convenient to be worn during day-to-day activities and during travel. It also provides stabilization during vertebral fracture and injuries. It has a hook and loop Velcro closure which allows adjustable compression
We are manufacturer of Orthopedic and plastic surgery corsets over the 15 years. We would like to share our large product catalog Adults and for kids.
is specializing in the production of medical consumables, established in 2012 with a registered capital of 30 million. The main products are absorbable surgical suture with needle Plain Chromic Catgut, PGA, PDO, PGLA, PGCL, etc., non-absorbable surgical suture with needle Silk, Nylon, Polyester, Polypropylene etc., suture materials, cassette sutures and surgical needle 300SS and 400SS Series, lifting threads for beauty, medical facial mask, orthopedic casting tapes & splints, plaster, IV cannula, polypropylene meshes and absorbable bone nails and so on.