Mica are sheet silicates historically significant for their ability to be split into large, thin sheets that are uniquely useful for their electrical, thermal, and mechanical properties. They have high electrical and thermal insulating properties; they are resistant to chemical attack; they can be split into transparent or optically flat films; and they can be cut or stamped to shape. Uses of mica: 1- Joint cements: muscovite is used in drywall joint compounds, where it contributes to consistency and workability, smooth surface finish, and resistance to shrinkage and cracking. 2- Coatings Fine-ground, -325 mesh and micronized mica grades are used in paint as a pigment extender and for dry film reinforcement. The inert, platy mica improves suspensi on stability, controls film checking, chalking, shrinkage, and blistering, improves resistance to weathering, chemicals, and water penetration, and improves adhesion to most surfaces. Coarser grinds are used in textured paints, and wet-ground mica is used in high quality exterior house paints. High aspect ratio grades are preferred for porous surface sealers to seal pores, control penetration, and reduce sagging and film cracking. 3- Plastics Finely ground, -325 mesh and micronized micas are used in plastics to improve electrical, thermal, and insulating properties. Mica is considered the most effective mineral for reducing warpage and increasing stiffness and heat deflection temperature in plastics. In general, mica reinforces crystalline better than amorphous polymers. Best results are obtained with nonpolar polymers when mica is pretreated with a coupling agent to improve wetting. Mica is used in both thermoplastics and thermosets. Its largest single use is in polyolefins, even though it requires stabilizers to prevent degradation of polypropylene. 4- Drilling fluids Coarse, hammermilled (+10 mesh) mica is used in waterbased oilwell drilling fluids to prevent fluid loss into porous rock formations.
Magnesium tooling plate (for vibration testing) Model no.: p003 Surface dealing: polished Common thickness: 100-1000mm, or as per clients requirements. Description: Sgz magnesium tooling plate offers a solution for a flat plate treatment with hardness and persistence. The production process results in plate with exceptional dimensional stability in machining and remains stable over time and time. It has excellent ductility and weldability for limited room temperature forming and multitude of complex parts. Meanwhile, as it is non-magnetic and has high electrical and thermal conductivity filling many material requirements in the electronics and computer industries. Other advantages: 1) for vibration: could absorb vibration for longer life than aluminum, with good dimension sability. 2) for tooling: could give 5-7 longer shelf-life for tooling works. 3) excellent thickness and flatness tolerance control, giving a perfect tooling plate. 4) lighter than steel, copper and most metal, giving easier handling. 5) give good alkali resistant performance, easy to clear up. 6) give good corrosion resistant performance. 7) excellent strength and hardness performance. 8) ideal for a broad range of operating temperatures, from 350 degrees fahrenheit to -30 degrees fahrenheit. 9. Nonmagnetic, it could be good for electrical and computer applications. Usage: 1) for vibration test equipment use. 2) for jigs, 3) for fixtures, 4) for optical benches, 5) for inspection gauges. 6) it is non-magnetic and has high electrical and thermal conductivity filling many material requirements in the electronics and computer industries.
Producing high quality turned parts since 1991 Here at Ajita, quality counts. It’s important to us that we get your part manufactured when you need it and how you need it! We produce a variety of products and components including sub-assemblies on a range of machinery, utilising the latest CNC machinery. In addition, our Inspection Department has a comprehensive stock of gauges, clocks and micrometers, together with optical comparators. In many instances we work closely with our customers during the design stage of their product, to ensure that the most economical component is produced with respect to shape & standard material. Please get in touch and discuss your requirements with us. Ajita Metals offer Brass Turned Components for Various Applications. Classification: Automobile Sector Electrical Sector Electronic Sector Tele Communication Sector Instrumentation Sector Moulding Industries Sensor Industries Valves & Water Industries Lighting Systems Material: Free Cutting Brass IS 319 Types I or BS 249 Types I Any Special Non Ferrous Material Grade Brass as per RoHS Directive Thread: ISO Metric (MM Threads) BA, BSW (Inches), UNC, UNF, BSP, NPT, BSPT Any as per customize Specification Size: Circumference Diameter 1MM to 200MM with length of any size. Apart from standard Precision Turned Components, we develop customize Precision Turned Components as per technical drawing or other relevant data. Finish: Natural Nickle Plated Silver Plated Tin Plated As per customer Specification Any Kind of Metal Turned Parts Can be Developed As Per Customers Specifications.
1 Layer to 52 Layer Printed Circuit Board for Electronic Products could meet all your PCB manufacturing needs,including High multilayer PCB, Aluminum based PCB, HDI PCB, Rigid-flex PCB, heavy copper PCB, and PCB assembly as well. Our products are widely applied in telecom, industrial control, power electronics, medical instrument , security electronics, aerospace and so on.And Provides "PCB One-stop PCB solution" to meet customers’ diverse demands. PCB board manufacture and PCB assembly service: -PCB board file with parts list provided by customers - PCB board made, circuit board parts purchased by us - High Quality,competitive Price & Best Service -100% E-test Testing Procedures For PCB Board: ----We perform multiple quality assuring procedures before shipping out any PCB board. These include: - Visual Inspection - Flying probe - Impedance control - Solder ability detection - Digital metallogenic microscope - AOI (Automated Optical Inspection) Quotation Requirement : ----Following specifications are needed for quotation: -Quantity -Base material -Board thickness -Copper thickness -Surface treatment -Color of solder mask and silkscreen Notice: Please send me your PCB files in gerber files by email to sales8#andwinpcb.com Delivery Lead Time for PCB board: -Quickturn for sample : 2 layers 24 Hours, 4 layers 2 days or 3 days. -General sample: 3 - 5days. -Mass production: within 7 days. Shipping Method and Payment terms: -By DHL, UPS, FedEx, TNT using clients account. -DHL, UPS, FedEx, TNT forwarder of China. -According to package weight ,we will tell you the freight. -Shipping the parcel by Russia Special Air Line for Russian customer (Notice: No TAX in your there, 3-10 days to Moscow, 15-20 days to other city) -By sea or air for mass quantity according to customer's requirement. -By customer's Forwarder -Payment By Paypal, T/T, West Union, etc.
1.AC100-240v 50/60Hz 2.10R Osram/YODN lamp,lamp lifetime 2000 hours 3.CH:16/24 DMX 512 channels optional 4.Gobo wheel 1: rotatable with 9 glass gobos plus white plus auto rotation, changeable gobos (diameter: 15.4 mm, effective inner diameter: 13 mm) 5.Gobo wheel 2: 13 metal gobos plus white 6.two effect wheel,frost,soft color effect,linear zoom,fast X/Y scan(2-3s),three-phase motor 7.Color wheel: one color wheel with 13 colors plus white 8.Effect wheels: two rotating prisms: Bilateral circular 8-face prism and Bilateral straight line 6-face prism, with frost effect. 9.Lens group of optics system: electric focus, with beam angle 0 ~ 20 °; adopting photoelectric reposition system, can automatically retrieve reset if false action happens accidentally 10.Dimmer: 0-100% linear adjustment, supporting mechanical strobe, adjustable speed strobe effect and strobe macro functions 11.Projecting range: Pan 540°, Tilt 239° automatically accurate positioning 12.Scanning speed: Pan 540°/ 3 sec, Tilt 239° / 2 sec 13.Beam angle: linear zoom 4-25° 14.Strobe: double strobe function, 0.5-14 times / sec adjustable) 15.Motor quantity: 15 units mute sound motors s, containing 2 units three-phase motors, 16bit drive 16.Appearance: heat-proof plastic, module pressing alloy materials 17.Light size: 37*25.6*60 cm 18.Carton case size: 40*29*63 cm 19.Net weight: 16 kg 20.Gross weight: 20 kg
Fiber Laser Marking Machine Description: Fiber laser marking machine designed to easy-move equipment, air-cooling, compact machine, Perfect output beam quality, high reliability, no consumables, maintenance-free. Long life Working. Import Germany IPG fiber laser, the international latest, most reliable structure, small size, power consumption is small, no high-voltage without large water-cooled system. Close to the ideal beam, USB interface, output control, optical scanning system, laser repetition rate high, high-speed without distortion. Features: 1. Fiber laser(German IPG brand or China fiber laser optional) 2.High speed galvo scanner(import or china brand optional) 3.No maintenance laser source: servicetime 100,000 hours. 4. Higher precision,faster speed 5. Small size,low power consumption 6. Red light preview:show the marking position before lasering 7. Notebook with Powerful software 8. User friendly interface, easy operation Application Field Mobile phone keypads, non-opaque-plastic keypads, electronic components, integrated circuits (IC), electrical appliances, communication products, sanitary wares, tool accessories, cutters, watches, glasses, jewelry, auto parts, boxes, bags, clasps, cookers, stainless steel products, etc. Type specification CS-F10 CS-F20 CS-F30 CS-F50 Wave length of laser 1064nm Laser repetition frequency 20kHz~100kHz Laser power 10W 20W 30W 50W Marking scope 70*70 /100*100 /200*200mm/300*300mm Laser sources Fiber module Laser Head Scanning head The minimum focus facula diameter 20µm Minimal character 0.01mm Marking speed =7000mm/s Repeated accuracy 0.0025mm Cooling ways Force-air Cooling Power supply 220V/ 50Hz/2kVA Process Material All kinds of metal and part of Non-metal Materials Support format PLT, BMP, DXF, JPG, TIF, AI etc Package Standard Crate for export
Application: 66*66 surface light source, can be used in mobile phone module assembly PCB panel and chip fixed,CCD edge glue curing, optical lens uv glue bonding, DVD head, LCD edge sealing, computer wire connector, injection tube catheter, medical industry, etc. Advantage: 1.Controller intelligent designed, could auto-adjust shining timing and power, through external programming controller to send the signal. Intelligent control, easy operation. 2.Interface parameter set lock, avoid mis-press, auto-search, have automatic alarm and alarm prompt system for abnormal trouble. 3.Apply for special lens group, the maximum illuminance could reach 5600mw/cm² 4.Long lifespan, Continuous using up to 25000 hours, indirect using up to 40000 hours Import leds,high quality,high light intensity,stable,low decay. 5.Effective shining area length could reach 15mm-2500mm, can be custom-made. 6.No heat radiation, more effective energy conservation Contact Kyle Li E-mail: kyle@futansi.com Wechat: KKKyleLi Skype: kyle_li1224 QQ: 2853879954 Tel: 86-13621951649 Futansi(Shanghai) Electronic Technology Co., Ltd No.86-88,Lane 3029,Huaxu Road,Qingpu District,Shanhai.
Application: 30*30 surface light source, can be used in mobile phone module assembly PCB panel and chip fixed,CCD edge glue curing, optical lens uv glue bonding, DVD head, LCD edge sealing, computer wire connector, injection tube catheter, medical industry, etc. Advantage: 1.Controller intelligent designed, could auto-adjust shining timing and power, through external programming controller to send the signal. Intelligent control, easy operation. 2.Interface parameter set lock, avoid mis-press, auto-search, have automatic alarm and alarm prompt system for abnormal trouble. 3.Apply for special lens group, the maximum illuminance could reach 5600mw/cm² 4.Long lifespan, Continuous using up to 25000 hours, indirect using up to 40000 hours Import leds,high quality,high light intensity,stable,low decay. 5.Effective shining area length could reach 15mm-2500mm, can be custom-made. 6.No heat radiation, more effective energy conservation Contact Kyle Li E-mail: kyle@futansi.com Wechat: KKKyleLi Skype: kyle_li1224 QQ: 2853879954 Tel: 86-13621951649 Futansi(Shanghai) Electronic Technology Co., Ltd No.86-88,Lane 3029,Huaxu Road,Qingpu District,Shanhai.
Application: 50*50 surface light source, can be used in mobile phone module assembly PCB panel and chip fixed,CCD edge glue curing, optical lens uv glue bonding, DVD head, LCD edge sealing, computer wire connector, injection tube catheter, medical industry, etc. Advantage: 1.Controller intelligent designed, could auto-adjust shining timing and power, through external programming controller to send the signal. Intelligent control, easy operation. 2.Interface parameter set lock, avoid mis-press, auto-search, have automatic alarm and alarm prompt system for abnormal trouble. 3.Apply for special lens group, the maximum illuminance could reach 5600mw/cm² 4.Long lifespan, Continuous using up to 25000 hours, indirect using up to 40000 hours Import leds,high quality,high light intensity,stable,low decay. 5.Effective shining area length could reach 15mm-2500mm, can be custom-made. 6.No heat radiation, more effective energy conservation Contact Kyle Li E-mail: kyle@futansi.com Wechat: KKKyleLi Skype: kyle_li1224 QQ: 2853879954 Tel: 86-13621951649 Futansi(Shanghai) Electronic Technology Co., Ltd No.86-88,Lane 3029,Huaxu Road,Qingpu District,Shanhai.
1.Bright black piano coating with fashion shape. 2.16:9 full hd present perfect vision effect. 3.With 5ms signal reaction, literally reduce blurred appearance from games or movies. 4.800:1 high speed image contrast ratio, present brightly color. 5.Support dvi/vga/hdmi interface. 6.Slim panel shape comes shaper for your desk. Size: 27.5 widescreen Type: active matrix tft White luminance: 500 cd/m2 Contrast ratio: 800:1 Pixel pitch: 0.309(h) x 0.309(v)mm Pixel hxv: 1920x1080 Optical response time: 5ms(typ.)/3ms (x-celerate overdrive) View angle: u/d/l/r 178x Support color: 16.7m Video scan frequency: horizontal frequency (24-75khz), vertical frequency (56-75hz), max. Vertical frequency (1920 x 1200@60hz) Vga input: vga analog, pc audio Hdmi input: hdmi(support dvi-d)/ hdcp not included Dvi input: dvi wire (price without) Speaker: 3w x 2 Voltage: ac 100-240v, 50-60hz Temperature/ humidity: 5-35j/ 10-85% Weight without case: 8.4kg Lean angle: 0-20x Swivel: yes (l/r 30x) Wall bracket: vesa standard Front panel control: vol(-), vol(+), menu, auto, power Accessories: 1.8m power wire, vga output wire, audio wire
Function: Truck Combination Tail Light with Reflector (Indicator Lamp / Position Lamp / Stop Lamp /Backup Lamp) Size: (W)275 (H)100 (D)22 mm Lens Color : Red /Amber Light Color: Red / Yellow Specification: 12V/24V; Piranha LED Turn light:11pcs(yellow) Piranha LED Rear Light:10pcs(Red) Certificate: ECE (E4-3R-02 16610) + DOT Packing: Bubble wrap and carton box Taiwan K-lite Industry Co. Ltd. engages in the reflex electroform and vehicle LED light design and produce. We are professional production of following : Reflex:reflector,Flat Electroform,Free form electroform, Reflector: motorcycle reflectors/ Truck reflector/ reflectors for bicycles/safety reflective badge/optical reflector/ Motorcycle lamp: Head Lamp/ Winker Lamp/ Tail Lamp/ License Plate Lamp/Truck bus lamp/side marker/tail lamp/other Truck bus lamp: side marker / tail lamp / other Car lamp:Bumper lamp/daytime running light Goods:LED reflector/special tail light Roadway safety:road stud/solar road stud Hose clamps:worm gear hose clamp/butterfly hose clamp/micro hose clamp/high torque hose clamp/worm drive hose clamp/micro hose clamp/wire hose clamp/ear hose clamp. Please do not hesitate to contact us for any relate development. Contact us : ww w.k-lite.com.tw
Key Advantages of Neodymium Magnet: 1. Neodymium Magnet are the most powerful commercially produced magnets. 2. Neodymium Magnet have a higher Maximum Energy Product, (BH).max, which can easily reach 30 MGOe and even goes up to 50 MGOe. 3. Neodymium Magnet can replace SmCo magnets in most cases, especially where operating temperature is less than 80 degrees Centigrade. 4. Excellent strength value. 5. Relatively low cost. 6. Compared to Alnico and SmCo magnets, relatively easy to machine Neodymium Magnets 1. Grade: N33, N35, N38, N40, N42, N48, N50, N52 (M, H, SH, EH, UH,AH) 2. Shape: Disc, Ring, Block, Cylinder, Arcs, Customized Design (Design proper magnets for clients¡¡£¤ specific requirements) 3. Coating: Ni, Ni-Cu-Ni, Zn, Tin, Epoxy, Ni-Ag etc. 4 .Size: customized size per your requirements 5. Directions of Magnetization: a. Oriented through Thickness b. Axially Oriented c. Diametrically Oriented d. Radically Oriented e. Customzied specific requirements magnetized 6. Quality Control: pass ISO9001:2008 and ISO14001:2004 , we will supply high quality magnet to you. 7. Application: Sintered NdFeB magnets are widely used in computers (voice coil motor of hard disc drive,pick-up of optical disk drive), speaker, telephone receiver and instrument¡¡¨¦wind generator, sensors, filters & strainers, magnetic coupling, magnetic separators,magnetic resonance image, Hi-Fi system,auto motors magnetic toy,etc.
Cyclone Burner System B Art No. 333501 •Cyclone flame burners are the most efficient burners for brazing and soft soldering •The rotating flame gives an even and all-round heat transfer to the pipe •Working pressure 2 bar Hot-air System B Art No. 333401 •Hot-air burners with powerful wind proof hot-air streams for heat shrinking •3349 ideal for shrinking in confined spaces and fibre optic closures •Working pressure 2 bar Soft Flame Burner System B Art No. 334191 •Soft flame design ideal for cable work and other heat shrinking applications •To heat the sleeves efficiently but still soft enough not to overheat the shrink material •Working pressure 2 bar Standard Burner System B Art No. 334401 •Standard burners with brush-type flames for all kinds of soft soldering / small heating applications •Silver soldering about 615°C •Working pressure 2 bar Pin-point Burners System R Art No. 884204, 393802, 393902 •Pin-point burners with the finest flames for precision work such as gold and silver forging •Recommended working pressure 2 bar Pin-point Burners System R Art No. 294102 •Standard burners with brush-type flames for all kinds of soft soldering/small heating applications •Recommended working pressure 2 bar Neck Tubes System R Art No. 350101 Only for pin-point burner 884204 Neck tube Length, 78mm Art No. 351102 Neck tubes made for high quality brass Neck tube Length, 70mm Propane Hoses • Diameter 5 mm and 8 mm • EN 559 / ISO 3821 • Fixed connection type • BSP 3/8" LH connection Regulators Art No. 309129 Art No. 306119 Standard Lot Size
Product Name : Sorbitol 70% Solution Characteristics Specifications Description A clean colourless viscous liquid Taste Mild sweet Specific gravity at 25 0 C 1.285 Min Refractive Index at 20 0 C 1.455 to 1.465 Acidity Or *NMT 0.2 ml of 0.01 M Naoh or NMT 0.3 ml of 0.01M HCL Solution as per specified test in I.P Reducing Sugar *NLT 12.8ml of 0.05M Sodium thiosulphate solution should be consumed as per specified test in I.P. Optical Rotation +1.5 0 to +3.5 0 (as per specified test in I.P.) Clarity & Colour Clear and colourless Arsenic NMT 2 ppm Heavy Metals NMT 10 ppm Chloride NMT 50 ppm Sulphate NMT 125 ppm Nickel NMT 1 ppm Sulphated Ash NMT 0.1% W/W Solid Matter 68% to 72% W/W Polyols NLT 62% W/W As D-Sorbitol *NMT = NOT MORE THAN Uses : • Frozen Desserts, Soups, Suces & Gravies • Infant Food, Salads & Food Dressing, Dairy Products, Meat Products • Fermentation Industry, Textile Industry, Adhesive Industry, Paper Industry • Building Industry, Leather Industry, Dyestuff Industry, • Printing Industry, Packaging Industry, Cigarettes, Crayons, Dry Cell Batteries Packing : 300 kgs HM HDPE Drums Stuffing : 20±2 mt/20’ FCL
Specifications Children's educational toys reading pen which can tell you say english 1.Good quality 2.Best price Which combine with optical component and cpu processor.It can be worked only by going with book which is printed with special printing tech.It really is a magical learning tool for kids.It could make he or she to learn more active and devotional, avoid to hate learning and arouse their intelligence.It is really a sincere partner for kids early education.Only by clicking a word or a sentence lightly on sounds book that is specially designed.It will make clear sound from soundspeaker or earphone.Reading pens are extremely popular with kids because it is more funny and interesting than tradiontal education.As popular kid¡¯s learning tool is really funny to kids.Comparing with other learning products, it can strongly their attention.We havce prepared abundant of sounded books.Such as mathematics , english study, classic fairy tales , chinese learning , game books, etc.Following reading pen came out, it is different from paper book.Because it make a sounded book, replacing tradional book. Main functions: 1. Point to read 2. Repeat 3. Translation 4. Volume control 5. Mp3 player 6. Record 7. Select songs 8. Page turning 9. Listening with ear phone or external device 10. Eco-friendly materials 11. Built-in rechargeable li-ion battery 12. Built-in 2gb-16gb memory 13. Certification: ce, rohs and fcc. Other services: 1. Book design and printing. 2. New function design and developement. 3. New mould design and developement.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
•agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. •agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. •agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). •agecho accuracy is 1% of the full scale. •agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) •agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. •agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. •agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. •agecho operating temperature 0 to 65 degree celsius. •agecho temperature compensated measurement for better accuracy (optional). •agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
