VEICHI provides OEM/ODM Service for TOP Customers. GS00 Water pump integrated machine 1. Motor-drive integrated structure,convenient installation and maintenance The controller wraps the surface of the motor to truly achieve an integrated design. Only four screws are required for installation; the motor and the fan also dissipate heat for the motor and the drive, reducing the fan failure rate. 2. Motor protection function Multiple inverter basic protection functions; Water pump exclusive protection function(water shortage protection, high and low pressure protection, leakage protection, anti-freeze embroidery protection, sensor disconnection protection) 3. Perfectly drive a variety of pump motors Perfectly drive a variety of water pump motors such as asynchronous, permanent magnet synchronous, synchronous reluctance, etc. 4. Efficient speed regulating fan High-efficiency fan dissipates the motor and drive at the same time, with large air volume and low noise. 5. Multiple key selection Mechanical key,touch screen key 6. Multiple pump control The pressure of the pipe network is detected by the host and sent to the auxiliary machine. When the pressure is not enough, the auxiliary machine starts and runs according to the set frequency, and the main machine performs constant pressure PID adjustment. Applications: Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management
VEICHI provides OEM/ODM Service for TOP Customers. The V5-MC104 series motion programmable logic controller is a multi-axis motion controller developed based on a high-performance processor designed for various industrial automation environments. Product Advantages 1. Support 16-axis synchronous motion, control cycle 125s-1ms. 2. Powerful I/O management and functions meet the logic control requirements of the control system. 3. Modular thinking, convenient function module packaging. 4. Good inheritability, shorten the project development cycle. 5. Users can choose the programming method according to their own habits. 6. Integrate multiple function blocks, just call to apply. 7. Support multiple communication methods. 8. A variety of programming methods, easy to use. Applications Woodworking machinery, textile machines, industrial robots, chase shears, flying shears and other occasions High-speed input: 4M (4 lines) 200k 2 lines High-speed output: 3M (4 lines) 200k 2 lines Analog input: 2 lines Analog input Communication: RS485, RS422, USB, Ethernet, CAN
VEICHI provides OEM/ODM Service for TOP Customers. AC800 series engineering multi-motor drive inverter is a high-performance, high-end inverter created by VEICHI after years of technical accumulation, in-depth market research, and demand analysis. It has excellent control performance, modular design, a common DC bus scheme, convenient and quick debugging tools, and abundant expansion interfaces. Satisfy all customer needs, multiple fault handling and protection methods, safety, and stability. Provide the driving core for energy saving and emission reduction of enterprises, and meet the diversified inverter function requirements of industrial enterprises. Product Advantages: 1. Excellent control performance; 2. Convenient and fast debugging tools; 3. Modular design, common DC bus scheme; 4. Rich extension interfaces to meet all customer needs; 5. Multiple fault handling and protection methods, safe and stable; Power range: single machine power range 110kW 500kW Input voltage: 400V system: 380 415Vac ±10% 47 63Hz Input frequency range: 47 63Hz The output voltage: 400V system: 510 720Vdc Applications It is widely used in steel, non-ferrous smelting, petroleum, port crane, papermaking, shipbuilding, offshore engineering, test platform, feedback power supply, and other occasions.
VEICHI provides OEM/ODM Service for TOP Customers. GS00 Water pump integrated machine 1. Motor-drive integrated structure,convenient installation and maintenance The controller wraps the surface of the motor to truly achieve an integrated design. Only four screws are required for installation; the motor and the fan also dissipate heat for the motor and the drive, reducing the fan failure rate. 2. Motor protection function Multiple inverter basic protection functions; Water pump exclusive protection function(water shortage protection, high and low pressure protection, leakage protection, anti-freeze embroidery protection, sensor disconnection protection) 3. Perfectly drive a variety of pump motors Perfectly drive a variety of water pump motors such as asynchronous, permanent magnet synchronous, synchronous reluctance, etc. 4. Efficient speed regulating fan High-efficiency fan dissipates the motor and drive at the same time, with large air volume and low noise. 5. Multiple key selection Mechanical key,touch screen key 6. Multiple pump control The pressure of the pipe network is detected by the host and sent to the auxiliary machine. When the pressure is not enough, the auxiliary machine starts and runs according to the set frequency, and the main machine performs constant pressure PID adjustment. Applications: Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management
VEICHI provides OEM/ODM Service for TOP Customers. AC310-XL special frequency converter for cable industry is a product continuously developed on the high-performance vector technology platform of VEICHI. It adopts field-oriented vector control technology, compatible with asynchronous and synchronous motor control. Moreover, under the premise of high performance and high reliability, the components are arranged reasonably to realize the book-style narrow body design. The design has strengthened customer ease of use and industry professionalism, and is equipped with a wealth of expansion interfaces. Product Advantages 1. Narrow book design, beautiful, convenient, and space-saving installation cabinet. 2. Independent air duct design, the fan can be disassembled freely, and the heat dissipation is good. 3. The PCB is all thickened with three anti-paint treatment, which is more reliable. 4. High seismic design, easy to deal with the vibration of the wire drawing machine. 5. Abundant expansion capabilities, IO card, communication card, GPRS, PG card, etc. 6. Can be applied to a variety of cable equipment. Applications Water tank wire drawing machine, straight wire drawing machine, pulley type wire drawing machine, non-swing rod wire drawing machine, power pay-off, tension frame winding, etc. Voltage, frequency: single-phase 220V 50/60Hz three-phase 220V 50/60Hz three-phase 380V~480V 50/60Hz Output voltage: 0 input voltage, deviation
VEICHI provides OEM/ODM Service for TOP Customers. IN310 integrated all-in-one machine is mainly composed of variable frequency drive, power-on knob switch, speed control positioner, and liquid crystal display. It is an all-in-one machine with multiple advantages, such as multi-function, smooth start-up, ultra-quiet, small size, easy operation, and energy saving. Product Advantages High-performance vector professional platform, excellent motor control algorithm; Support synchronous and asynchronous motor; Integration of driver and peripheral electrical equipment; "A5 paper" size, flexible and compact; Exquisite design, full of technology; Simple operation, plug and run, no debugging required;Rich expansion interface, applicable to various occasions; PCB three anti-paint protection to ensure product stability and reliability; Applications Synchronous direct-drive fan motors, asynchronous fan motors, fans, water pumps, transmission, food packaging, and other speed control applications. power range: Single-phase AC220V 1.5KW Three-phase AC380 1.5KW ,2.2KW
VEICHI provides OEM/ODM Service for TOP Customers. SD500 is a new generation of high-performance spindle servo drive. The standard dual-encoder interface can realize the full-closed-loop servo control of the spindle motor. It integrates speed control, position control and torque control. Precise position control and enhancement of product environmental adaptability and customized and industrialized design provide excellent drive solutions for machine tool spindles. Product Advantages 1. Dual encoder: dual encoder interface, full closed-loop vector control. 2. Quick response: strong load response capability. 3. Parameter optimization: self-tuning of loop parameters. 4. Wide range: large low-frequency torque, wide speed range. 5. Strong stability: accurate positioning and simple debugging. 6. Support the open-loop and closed-loop: Integrate synchronous and asynchronous drive. Applications Used in industries and equipment such as CNC machine tools, electronics manufacturing, textile machinery, printing and packaging, die-cutting machines, and woodworking machinery. Voltage frequency: Three-phase: 380V 440V, 50 / 60Hz The output voltage: Output under rated conditions: three-phase 380 440V, error is less than 5%
VEICHI provides OEM/ODM Service for TOP Customers. AP100 air compressor implements remote monitoring of the air compressor on-site application status. GPRS wireless transmission technology, intelligent fault detection, SMS notification. During operation, the magnetic field of the motor can be directly monitored, and early warning can be made to reduce the probability of loss of magnetization of the motor. Product Advantages 1. Three-in-one design to meet the various needs of customers. 2. High protection level, strong environmental adaptability. 3. Perfectly drive synchronous and asynchronous screw compressors of various types. 4. Intelligent IOT, real-time remote monitoring of air compressor field application conditions. 5. The intelligent energy-saving vector control algorithm, small current, large output, and energy saving. 6. Double predictive motor demagnetization mechanism to prevent irreversible demagnetization of the motor. 7. Fuzzy PI algorithm, fast voltage regulation, fast response, no overshoot. 8. The fuzzy PI algorithm, fast voltage regulation, fast response, no overshoot. Applications Pneumatic and pneumatic control, air drive and participation in chemical reactions, etc. The output voltage: Output under rated conditions: 3-phase, 0 input voltage, error less than 5% Output frequency range: 0 400Hz
VEICHI provides OEM/ODM Service for TOP Customers. S200K construction elevator integrated special machine is a special model specially developed for the series of construction elevators without a cab. It integrates console, frequency conversion control unit, logic control unit, lifting weight limiter, etc. The products are multi-functional, beautiful in appearance, and reasonable in structure, suitable for export. Product Advantages 1. Run steadily with low frequency and large torque S200K adopts the latest speed sensorless magnetic flow vector control technique that has a very quick dynamic response. The advanced current limiting technology ensures steady running during starting, rising, and dropping process without trip when the load fluctuates frequently. 2. Adopts special logic brake sequential control It adopts special logical break sequential control technology that brake will be set to open status only when starting frequency and starting current have arrived at the same time. It effectively ensures the security and reliability of the construction elevator system. 3. Professional brake circuit design The holding brake circuit design is secure and reliable. Two logical break signals control 2-line brake contactors respectively. When contactor adhesion or other mechanical failure happens, it still ensures the high security of the system. Applications Construction lifts
VEICHI provides OEM/ODM Service for TOP Customers. QT tower crane integrated drive is a mid-to-high-end model designed for intelligent modularization and lightweight design for tower crane electronic control requirements. It integrates the frequency conversion control unit, logic control unit, and black box monitoring unit (extension) of the lifting, slewing, and luffing mechanism. It can improve the safety and stability of the tower crane and solve the problems of equipment maintenance difficulties. Provide customers with a high-performance, complete tower crane system solution. Product Advantages 1. Modular Design, Integrated with Five Core Units VEICHI QT series tower crane control system has specially developed with modular design: the lifting, slewing, and luffing control module run independently without interference. Besides, it has been integrated with IOT control unit. 2. Lifting control unit: It is capable of running for a long time, braking at zero speed, and running smoothly without shaking. By using the QT series, it extends the service life of the tower crane's components such as transmission mechanism, steel wire rope, and more parts. Meanwhile, it effectively improves the safety of tower cranes. 3. Slewing control unit: QT02 tower crane inverter adopts flexible torque control that features powerful jog, fast response, steady running without a rebound. Applications Tower crane
VEICHI provides OEM/ODM Service for TOP Customers. AC70T hoisting special frequency converter is specially designed for hoisting industry applications. Complete functions, good protection effect (resistance to salt spray corrosion), and excellent performance to ensure the safety and reliability of lifting machinery. Product Advantages 1. Master-slave speed synchronization control function: When the double hoisting mechanism lifts a heavy object at the same time, then it can ensure that two hoisting mechanisms are synchronously promoted to ensure safety 2. Real-time correction control (closed-loop mode): It is suitable for applications with large spans. The master-slave adopts real-time position correction to meet the synchronous control of the position of the cart (applicable to driving and traveling equipment of gantry crane) 3. The slack rope detection function: to prevent the unsafe operation of the light load and high-speed function due to the malfunction of the crane rope under slack conditions 4. Support Profibus-DP, Modbus, and CANopen communication protocol to achieve the communication connection between multiple frequency inverters and PLC and HMI. Applications Port machinery, ship machinery, construction machinery, mining machinery, cranes, gantry cranes, electric hoists, cranes and hoists, etc. The output voltage: Output under rated conditions: 3-phase, 0 input voltage, error less than 5% Output frequency range: 0 320Hz
VEICHI provides OEM/ODM Service for TOP Customers. S200-C4/E4 type construction hoist integrated drive is a special model developed for construction hoist electric control system. Set frequency converter, brake module, logic controller, weight limiter, brake power supply, etc. Provide customers with a high-performance, complete electrical control program. Product Advantages Function upgrade 1. High-performance vector professional platform, excellent motor control algorithm. 2. Brake torque detection function. 3. The automatic test function saves time before leaving the factory and improves delivery efficiency. 4. HMI man-machine interface interactive system. Technological innovation 1. Designed with upper and lower deceleration limit interfaces, which are independent of each other and do not interfere with each other, and can quickly enter high-speed gears to improve equipment carrying efficiency. 2. Automatic leveling: simplify the complex and make the operation more user-friendly. 3. Soft limit protection, accurate feedback of real-time position through the height encoder; even when the upper and lower limit fails. Make sure that the lift does not appear to rush to the top and squat bottom. 4. Deceleration optimization, suitable for "old machine retrofits" without deceleration limit conditions. Applications Construction lifts The output voltage: Output under rated conditions: 3-phase, 0input voltage, error less than 5% Output frequency range: 0ï½?600Hz
VEICHI provides OEM/ODM Service for TOP Customers. The AC70S special drive for construction elevators is a drive specially designed for the transformation of old elevators with a position stop function. It integrates a frequency converter, brake module, and status indicator. It is convenient for on-site maintenance of equipment and reduces the cost of construction elevator frequency conversion transformation. Product Advantages 1. Safe and reliable: The special brake logic control function, through the release frequency and the release current colleague to reach the brake, to ensure its safety and reliability. 2. High performance-price ratio: Compared with a complete set of inverter cabinets, the price is cheaper and the performance is equivalent. 3. Humanized design: No need to change the inverter parameters, as long as the wires are correctly connected, it can operate normally after turning on the machine. 4. The transformation is simple: no need to add deceleration limit devices, no replacement of the operating table; accurate landing can be achieved at any speed. 5. Convenient maintenance: The keyboard operator can display upper and lower limit, ascending and descending signals, which is convenient for system maintenance. Applications Construction elevator Voltage frequency: Three-phase 380V 50/60Hz Three-phase 220V 50/60Hz The output voltage: Output under rated conditions: 3 phases, 0 input voltage, error less than 5% Output frequency range: 0~120Hz
VEICHI provides OEM/ODM Service for TOP Customers. The SI21 solar pump inverter can be used to provide clean water resources in remote areas where power facilities are scarce; the controller can convert the direct current of the photovoltaic array into alternating current and drive various water pumps. Product Advantages 1. Advanced Syn.R.M. and PMSM Driving Technology; 2. Wide-range and High Efficiency MPPT Technology; 3. Various Specific Functions for Solar Pumping; 4. Intelligent IOT; 5. Functional Monitoring Software; 6. Flexible and Various Installation; Applications Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management SI21-D3-2R2G-A Total Solar Panels Voc input range: D1 series: 60~400Vdc D3 series: 150~450Vdc D5 series: 250~780Vdc AC input voltage/frequency range: D1 series: Single/three phase 110Vac 50/60Hz D3 series: Single/three phase 220/230Vac 50/60Hz D5 series: Three phase 380Vac 50/60Hz Output voltage/frequency/power range: D1 series: 110~230Vac 0~600HZ 0.75~1.5KW D3 series: 150~230Vac 0~600HZ 0.75~2.2KW D5 series: 230~460Vac 0~600HZ 0.75~5.5KW Overload Capacity: 1. 150% rated currency 60s; 2. 180% rated currency 10s; 3. 200% rated currency 0.5s;
VEICHI provides OEM/ODM Service for TOP Customers. The SI22 solar pump inverter is cost-effective and economical, and the farmer's uncle is a little helper for photovoltaic water and irrigation to get rich. Small and exquisite, palm-sized, greatly saving installation space and transportation costs. Simple and stylish, integrating technology and art. Product Advantages 1. High-cost performance, pump more water with less cost. 2. Perfect drive synchronous, asynchronous, BLDC, single-phase. 3. Small and exquisite, palm-sized, saving installation space, and transportation costs. 4. Simple and stylish, integrating technology and art. 5. Intelligent IOT, which integrates online, offline, and WIFI functions. 6. MPPT, real-time output maximum power. 7. Simple operation, easy wiring, no trouble. 8. Multiple protection functions escort the water pump. Applications Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management SI22-D1 series, DC60-400VDC input, 3 phase 110-230VAC output, suitable for 110VAC pump. SI22-D3 series, DC60V-400V input, 3 phase 220-240VAC output, suitable for 220VAC pump
VEICHI provides OEM/ODM Service for TOP Customers. The SI23 solar pump inverter has a simple and elegant appearance, and the book-type structure design saves installation space. Smart IOT brings smart irrigation. Product Advantages 1. The new book-style narrow structure design greatly saves installation space. 2. Abundant expansion interfaces and new expansion accessories to meet various needs. 3. The new air duct design makes the heat dissipation effect even better. 4. Adapt to the intelligent Internet of Things module, big data remote control. 5. A variety of features to meet the needs of various markets and users. 6. The maximum power is 710kw, multiple voltage levels, suitable for multiple countries and regions. 7. Synchronous and asynchronous drive integration, comprehensive open, and closed-loop. 8. The new control algorithm makes the drive more stable and efficient. Applications Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management Voltage frequency: D1 model 90-400VDC/single-phase 110VAC 50/60HZ D3 model 150-450VDC/ single-phase 220VAC 50/60HZ D5 model 250-750VDC/ three-phase 380VAC 50/60HZ T3 model 350-780VDC/ three-phase 380VAC 50/60HZ Recommended voltage Voc: D1 model 175-360VDC D3 model 360-430VDC D5 model 620-750VDC T3 model 620-750VDC
VEICHI provides OEM/ODM Service for TOP Customers. SI30 solar pump inverter has wireless transmission technology (GPRS, Bluetooth, WIFI), mobile APP "one-key operation". Modular design, four major modules for customers to choose from. IP65 high protection grade, directly installed outdoors, without cabinet assembly. Drive synchronous, asynchronous, BLDC various types of pump motors. The new aluminum-alloy appearance is simple and elegant and more reliable. Product Advantages 1. Smart Internet of Things-Smart Irrigation. 2. Modular design. 3. Wireless transmission, mobile APP "one key operation". 4. IP65 high protection level, no cabinet assembly is required. 5. AC110V/220V/400V multiple voltage options. 6. Drive a variety of permanent magnet synchronous, asynchronous, BLDC motors. 7. MPPT Maximum power output + multiple protection functions. 8. New aluminum alloy appearance, generous and reliable. Applications Farmland irrigation, residential water, landscape fountains, swimming pool water supply, desert management Voltageï¼?frequency: D1 modelï¼?90-400VDC/single-phase 110VAC 50/60HZ D3 model 150-450VDC/ single-phase 220VAC 50/60HZ D5 model 300-850VDC/ three-phase 380VAC 50/60HZ Recommended voltage Voc: D1 model 175-380VDC D3 model 360-430VDC D5 model 620-750VDC
VEICHI provides OEM/ODM Service for TOP Customers. VEICHI industrial HMI VI20 series , a new generation of the IOT HMI with industrial ABS plastic shell and high reliability. The new model comes with a more practical down-cable approach and a better looking. The higher resolution models are aslo available. With the FLink IOT module, you can upgrade the IOT HMI immediately and enjoy a complete and convenient industrial IOT cloud platform service. Product Advantages 1. HD, highlight, full viewing angle: Using high-definition, high-brightness display LCD, the maximum viewing angle reaches 170 degrees. 2. Support edge computing: Possess powerful embedded operating software, namely edge computing software. 3. Support Flink IOT expansion module: Remote configuration of field device data is possible through Flnk. 4. Support cloud platform Flex Cloud: Powerful SAAS platform based on B/S structure. Brochure and Manual. Applications Petroleum and natural gas, chemical pharmaceuticals and other electrical environments that require explosion protection. Touch screen: 4-wire industrial resistive touch screen Rated power: VI20-043S-F: < 2.5W VI20-070S-F, VI20-070S-FE, VI20-101S-F, VI20-101S-FE:< 10W Rated voltage: DC24V, Workable range DC 9V~28V
VEICHI provides OEM/ODM Service for TOP Customers. PLC series product planning PLC is divided into several series of ultra-small, general-purpose, bus type, high-performance type, operation control type and industrial Ethernet type. 1. Among them, VC1 and VC1S are aimed at higher cost-effective applications of logic control below three pulses. 2. The VC2 series is aimed at applications based on CANOpen bus type control. 3. VC3 is aimed at the application of multi-channel pulse control. VC3M is aimed at pulse-based motion control. 4. VC5 is aimed at industrial Ethernet applications based on EtherCAT. VC1 series product introduction The VC1 series PLC is a general-purpose PlC with small structure, large functions, and extremely high cost performance. It can be widely used in machine manufacturing industries such as machine tools, textiles, packaging, plastic steel, air conditioners, elevators, and printing. 1. User program supports up to 16k steps. 2. Support Ethernet through left expansion. 3. 3 channels 100kHz pulse output. 4. Support USB communicatio make debugging more convenient and quick. 5. 2 chanmels of 50kHz high-speed counting, 6 channels of 10kHz high-speed counting. 6. Rich expansion modules. 7. 1 way 232 1 way 485. 8. Convenient firmware upgrade. 9. Can expand 1 way 485 through the left expansion module. Application Machine tool, packaging, printing, textile and other industries.
VEICHI provides OEM/ODM Service for TOP Customers. VEICHI SD700 series servo drives are high performance, high reliability, high quality, and cost-effective products to meet a variety of industrial environments and critical system applications and achieve the perfect combination of servo and program. Product Advantages: 1. The speed loop response bandwidth can reach 3kHz. 2. Using a 23-Bit absolute encoder, the communication speed can reach 2.5Mpps. 3. Bandwidth setting, automatically complete PID loop gain calculation. 4. Powerful PC software, multi-channel monitoring, easy to use. 5. Automatically complete inertia identification, loop gain, friction compensation, and other parameter settings. 6. Support multi-stage vibration control function, effectively limit resonance. 7. Robust control ensures smooth operation of loads with inertia within 30 times. 8. New structural appearance design, compact and space-saving. Voltage: 1 Phase 220V, 3 Phase 220V - 400V; Power: 0.1kW - 55kW, customized up to 250kW; Applications: Electronic manufacturing equipment, numerical control equipment, packaging machinery, printing machinery, textile machinery, plastic machinery and glass equipment, testing equipment, etc.
