Replace BUSCH Vacuum Pump Oil Mist Filter 0532140157/V532140157 Applied to R5 / RA / RC 0063 B R5 / RA / RC 0040 B R5 / RA / RC 0025 B R5 / RA / RC 0100 E R5 / RA / RC 0100 C R5 / RA / RC 0063 C R5 / RA / RC 0040 R5 / RA / RC 0025 R5 / RA / RC 0063 R5 / RA / RC 0063 E R5 / RA / RC 0100 R5 / RA / RC 0100 B
Centrifugal Monoblock Pumps Available Up to 2.0 H.P., Specially Design For Low Voltage Range. MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Graded Cast Iron, Impeller : Graded Cast Iron, Casting Parts : Graded Casting, Roller Bearing : SKF Made Bearing. Thermal Overload Protector Available. TECHNICAL DETAILS: Head Range : Up To 30 mtrs, Discharge Range : Up To 1000 lpm, Suction & Delivery : 25 X 25 mm / 50 X 50 mm / 65 X 50 mm/ 75 X 65 mm, Power Rating : 1 H.P. TO 2 H.P., Voltage Range : 120 V TO 240 V (1-Phase).
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
U5MK8267 oil pump 472-4718/ 297-3050 for perkins engine
Engine Oil Pump For " BMW " Part Number : 11417573748
Pulsar 180 Oil Pump Assembly
Yty series oil pumps motors are special designed for oil pump. They possess the advantages of newly instruction, perfect finishing, low temperature rising, low noise together with the performances of little vibration and high starting torque, etc.
CNDIP Common Rail Injector Nozzle DLLA140P1723 Injector Nozzle DLLA140P1723 Fuel Nozzle for Bosch Injector 0445120123 DIP (Diesel INJECTION PARTS) PLANTS is a manufacturer specialized in diesel fuel injection parts & components. The product line includes Injection Nozzles, Pump-elements (Plunger Barrel), Delivery Valve, Head Rotor,VE Pump Parts and many other related products. We are manufacturing and assembling the products of superior quality and performance with guaranteed components over 26 years! Our earned a reputation for outstanding customer service, and we continue to be dedicated to achieving excellence that can be depended upon.� � � CNDIP is your trusted partner in supplying highest quality ,best price for diesel engine spare parts. With thousands of parts in stock, we have what you are looking for! Our Advantages � � 1. High quality,Best price.� � � 2. Timely delivery; Within 7 days after confirmation. � � 3. Stable performance, Safety and stability,Long-standing durability. � � 4. Warranty: 6 months. � � 5. Packing customization: Accepted. More Products Injector Nozzle Valve 0445120002 DSLA136P804 F00RJ00005 0445120006 DLLZ157P964 F00RJ00375 0445120007/212 DSLA143P970 F00RJ00339 0445120014/015 DLLA155P1052 F00RJ00399 0445120019/020/084 DLLA150P1076 F00RJ00399 0445120029 DLLA118P1357 F00RJ01941 0445120032 DSLA124P1309 F00RJ00339 0445120037 DLLA144P1387 F00RJ01941 0445120038 DLLA145P1386 F00RJ01941 0445120048 DLLA157P1424 F00RJ01428 0445120054 DLLA143P1536 F00RJ01278 0445120057 DLLA143P1535 F00RJ01278 0445120059/231 DSLA128P1510 F00RJ02130 0445120060/250 DSLA143P1523 F00RJ02130 0445120066 DLLA144P1565 F00RJ01479 0445120067 DLLA146P1581 F00RJ01479 0445120070/241 DLLA144P1539 F00RJ01941 0445120074 DLLA150P1566 F00RJ01451 0445120075 DLLA137P1577 F00RJ01278 0445120079 DSLA143P1604 F00RJ00339 0445120083 DLLA152P1690 F00RJ01704 0445120085 DLLA155P1052 F00RJ00339 0445120086/388 DLLA145P1655 F00RJ01727 0445120087 DLLA145P1654 F00RJ01727 0445120090 DLLA150P1746 F00RJ01428 0445120097 DLLA128P1635 F00RJ01941 04
We manufacture all types of Brass Bush as per customers' requirements. Applications : Toy, Automobiles, Electrical Equipment, Household Appliances, Furniture, Mechanical Equipment, Daily Living Equipment, Electronic Sports Equipment, Light Industry Products, Sanitation Machinery, Art ware, etc. Types of Bush : Male Reducing Bush Brass Female Bush Brass Oil Pump Grooved Bush Brass Sleeve Bush Brass Spindle Bush CNC machined Brass Bush for Heavy Vehicles and Earth Movers Light Bush for Home Appliances like; Fan, Mixer, AC, etc.. Additional Information: Production Capacity: 100000pcs per month Delivery Time: Depends upon order volume Packaging Details: Export worthy customized packaging. Wooden Pallet > Paper Box > Plastic Bag.
Model NO:HY01 Mesh Form:Internal Engaged Tooth Flank:Straight Tooth Tooth Curve:Involute Power:Electric Type:Normal Line Gear Pump Applications"Machinery Manufacturing Certification:ISO Material:Cast Iro
Applications: designed for handling liquefied hydrocarbon gases, volatile flammable and inflammable liquids as well as solutions of inorganic alkalis (sodium hydroxide) at the process plants in the oil-refining industry. May be also used to transfer water and condensate in the steam and water circuit systems. Design: ndms series motor pump units consist of a centrifugal pump and an induction motor in the explosion-proof version, which are mounted on a common fabricated base plate. The pump and motor shafts are connected by means of a flexible coupling. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps as components of the pump units are electrically driven horizontal, centreline-supported, multistage ring section centrifugal pumps with rotor axial thrust balancing by a balance drum.
ZYB-50 Vane Pump ZYB-50 Vane Pump, built in air separator, by pass valve, filter, is with three different top covers for different connecting pipes. A type. B type and C type. With the advantage of low noise, high flow rate, long life service, etc. Speed : 630rmp ZYB-50 Flow Rate : 45L/min¡«65L/min ZYB-80 Flow Rate : 75L/min¡«85L/min Vacuum : 0.054MPa Noise : 72dB Working Pressure : 0.16¡«0.2MPa Package : 1pcs/carton Net Weight : 17kg Gross Weight : 17.5kg Dimension : 340¡Á260¡Á370mm
Electric fire pump is a kind of water supply device widely used in hospitals, shopping malls, office buildings and residential buildings in the middle and high-rise buildings, when an accidental fire, start the fire pump can ensure that the water pressure in the pipe network to meet the requirements of the fire extinguishing device, so that the fire is timely put out. In China, the fixed electric fire pump water supply system generally adopts the mode of one (or more) main pump with one (or more) standby pump, and is equipped with a special control cabinet to achieve the control of the fire pump.