Duplex Ingot Moulds are made according to the buyers size and composition requirements.
Supply of several non-ferrous cast alloys in the shape of ingots, The alloys available include: 1)Aluminum alloys Pure A1 , Al- Si, Al-Mg , . etc. 2)Copper alloys Pure Cu, Cu-Zn 3)Zn alloys 4)Pure Lead and lead alloys. Specification of the supplied ingots. 1.Sizes in the range of : Al65178 Cm Cu4677 Cm 2.Weights: Al12 Kg Cu14 Kg Zn10 Kg Pb50 Kg Moreover, alloys with specific chemical composition could be supplied according to the customer request.
Fahrenheit and for lower stress applications at higher temperatures. A-286 can be hardened to a strength level. The alloy is also useful for low temperature applications requiring a ductile, non-magnetic high strength material at temperatures ranging from above room temperature down to at least -320 degrees Fahrenheit. This alloy can also be used for moderately corrosive applications in aqueous solutions. All of our A-286 is ordered to specific decimal thicknesses.
Silicon steel 1.0 scope 1.1 this specification covers the grain oriented electrical steels are iron-silicon alloys that provide Low core loss and high permeability needed for more efficient and economical electrical Transformers. Cold rolled grain oriented (crgo) grades of electrical steel are typically used For transformer cores and large generators. 2.0application 2.1 the cgro is used regularly for cores in transformers. 3.0standard 3.1 this specification is prepared by taking guidance from bs 601:1973 4.0material 4.1 cold rolled grain oriented (crgo) grade m5, moh, zdkh as per bs 601:1973 and Equivalent to jis c 2553 5.0properties 5.1 specifications and typical electrical and magnetic properties (see appendix 1) 6.0dimension and tolerance 6.1 dimension : as per the purchase order with the tolerance as given table below Tolerance on width Nominal width (mm) Overup to and includingtolerance (mm) 0150+ 0 0.3 150500+ 0 0.5 001000+ 0 1.5 Tolerance on length Nominal width (mm) Overup to and includingtolerance (mm) 02000- 0 + 1.5 2000>2000- 0 + 2.0 Tolerance on length The tolerance on the mean thickness, measured by contact micrometer, for any coil shall be 0.03 mm from the nominal thickness. Tolerance on edge burr The tolerance on edge burr not to exceed 0.05mm. Tolerance on edge camber Edge camber is the lateral departure of the edge of the strip from a straight line forming a chord, refer figure a: Tolerance on edge camber of strip in coil shall not exceed 2 m in 2000 mm and shall be measured against a straight edge using a 2000 mm length cut from a coil. 7.0references (1) bs 601: 1973, steel sheet and strip magnetic circuits of electrical apparatus.
Ferro manganese We manufacture the products as per customers specification As per customers' requiremwnt
Packing: 25kg/40kg/50kg , plastic bag inside and carbaord drum outside Chemical properties: the color is yellow-orange. The relative density is 3.357g/cm3 . It is not soluble in anhydrous ethyl alcohol but can dissolve in acids or alkali. The steam is poisonous and the relative molecular weight is 181.88 . Quality guarantee : Advanced technique, completed resource controling system and hard and fast measurement of products , which all make sure of the products stability . Today our products have been sold all over the world like america , german , middle east and so on . We have about twenty years experiences of production and have enjoyed good reputation in this line .Welcome to contact us ! 98% 99.5% 99% 99.9%
All the handle can be fixed in sash door, wooden door, frame door optional and cabinets, the usefulness is very widely. The surface of all the stainless steelhandle can be high-quality processed for smooth , abrasive, half-abrasive. The products are more and more beautiful. All handles can be manufactured to meet customer special material requirements, including stainless steel, steel and zine alloy.
Aluminium alloy insect netting 30 meters per roll per carton box
hastalloys
Aluminum alloy wire 5154 Dia.0.12-0.16mm Packing: 1kg/spool, 12spool/carton.
Ferro silicon Chemicall detail as follow Specs: Si:75%min.or Si:72%min. Al:2.0%max. C:0.2%max. S:0.02%max. P:0.04%max. Size:10-100mm,10-50mm 90%min. Packing: in plastic woven bags of 1mt net each or in bulk. The annual output reaches 10,000mt In plastic woven bags of 1mt net each or in bulk
Aluminium profile
Aluminium extrusion frame
Tantalum We can provide all kinds of sizes Follow the customer's standard
Niobium Can provide all kinds of nb products Follow the customer's standard
Can provide all kinds of W product Follow the customer's standard
Indium Can provide all kinds of in product Follow the customer's standard
Zamak
Ferro Molybdaen Specification: Mo=66-70%, Cu=0.3-0.6%, P=0.03-0.4%, S=0.08-0.12%, Si=0.6-1.1%, c=0.03-0.07% Iron flanks
Ferro molybdenum Mo: 60%min cu: 0.50%max c: 0.10%max P: 0.10%max si:1.5%max s:0.10%max Packing : 250kgs steel drums on pallets
