A. When the ventilation technique with open high frequency and low humidify volume is adopted, the airway pressure is low with little effect of oxygen compound is good and the oxygen partial pressure can be increased rapidly. While the one with regular frequency and great humidify volume is adopted, CO2 can be ejected easily. B. Convenient connecting, it can be connected through the nasal and endotracheal tube. C. The ventilation mode with high frequency and low humidify volume will not easily produce pressure hurt. D. The effect of oxygen dispersion is so good that the tested beastie can stand for a long time. E. Adjustable oxygen concentration, the ventilation mode with continuous oxygen stream and good humidifying effect can ensure beastie to respire independently. F. Be fit for manual ventilation test for monkey, rabbit, dog etc. G. Configured with multiform ventilation conduit for beastles or connected with gas source, in addition. Specifications·ª Frequency:8f+150 breaths/min I/E ratio·ª1:1f+1:3 and inverse ratio Driving Pressure ·ª0f+0.08MPa Gas source: High-pressure oxygen source or air compredsor. The input pressure is not more than 0.16MPa High-pressure gas source:0.16MPa Output Limit of reductor: not less than 0.16MPa Ventilation Mode:HFJV(High Frequency Jet Ventilation);CPAP(Continuous positive airway pressure),Manual Control Mode.
Medical gas terminal outlet Medikar q-click terminal units newly designed arised from the difficulties of repairing and replacing medical gas terminal units in working hospital areas, especially in intensive care units, sbcu, operation theatres, and emergency departments where highly crowded and continuous patient and staff movement exist. It is very difficult to shut off gas flow and perform maintenance on the usual terminal units. Medikar q-click terminal units allow the maintenance, repair and replacement of the terminal units so easy that it takes only a few seconds. Also medikar q-click terminal units allow changing 2nd fix and convert the unit from bs standard to din standard or to en standard and vice versa. Medikar q-click terminal units consist of three main parts : a) base block (1st fix), b) cartridge and c) main body (2nd fix). A) Base block (1st fix) : made of forged brass and has a maintenance valve inside. It is tested under 10 bar pressure and contains gas specific pins and patented q-click mechanism. Inlet can be supplied by either brazed copper tube or brazed nist connector depending on the installation place. B) Cartridge : made of machined brass ; contains check valve which is the same for all gas types but differs according to the standard applied. C) Main body (2nd fix) : this is the part which makes our difference from other gas outlets. It consists of a locking mechanism, an indexing part for gas and standard differentiation and identification plate.
Oxygen concentrator Flow: 5l/min Purity: above 90% Pressure:0.03-0.07mpa Sound level: less than 50db Power consumption: 450w with 220/50 or 110/60-50 or 220/60 Weight: 29kg. Dimension:47x48x52cm Each unit packed in a carton with standard accessaries
Dr. Odin Adult Size Oxygen face mask for procuring oxygen from Source of Oxygen Cylinder / Oxygen Concentrator / Oxygen Hose, full set of oxygen mask and tubing which is universal fit for all machines and cylinders. It is not for use with nebulizer.
#BD #Bangladesh #oxygen Mobile: 01703180414. Name: Medi-Heart. Address: BMA Bhaban, Palton. Made in German. Full german technology. ONE year parts replacement service warranty. Brand new machine. Fully intact packet ey ache jevabe china theke ashce. Home delivery and installation possible. Remote control, full disital tuch screen display, purity alarming system, 24 hours continues oxygen flow. Nasal canula,extra canula, nebulizer system masq, adaptor etc. Also Light weight so that easy to carry. Ready stock available any time delivery possible. 7L(93+-%) 9L(93+-% & build in nebulizer ) 5Level(90+-3% with Battary backup ) Call me for cash on delivery or home delivery or any kind of information.
Oxystar Oxygen Concentrator is designed to provide supplementary oxygen to patients diagnosed with oxygen therapy. It delivers a high concentration of oxygen and is used with a cannula to channel oxygen from the concentrator to the person. It is perfect for home and institutional use. Uses: It is used to deliver supplementary oxygen to patients diagnosed with oxygen therapy. Product Specifications and Features: Sound Pressure Level: 60dB(A) Maximum Flow: 1L/min Ideal for home and institutional use Gives supplementary oxygen to patients diagnosed with oxygen therapy Directions For Use: Use as directed on the label. Safety Information: Read the label carefully before use Store in a cool dry place away from direct sunlight Keep out of reach of the children Avoid physical damage This product is non-returnable.
Oxystar Oxygen Concentrator is designed to provide supplementary oxygen to patients diagnosed with oxygen therapy. It delivers a high concentration of oxygen and is used with a cannula to channel oxygen from the concentrator to the person. The concentrator is perfect for home and institutional use. Uses: It is used to deliver supplementary oxygen to patients who are in need of oxygen therapy. Product Specifications and Features: Sound Pressure Level: 60dB(A) Maximum Flow: 1L/min Ideal for home and institutional use Gives supplementary oxygen to patients requiring oxygen therapy Directions For Use: Use as directed on the label. Safety Information: Read the label carefully before use Store in a cool dry place away from direct sunlight Keep out of reach of the children Avoid physical damage
Product Description Brand -Servotech Model Name/Number -ST-DE-2A Flow Rate -5 LPM Weight (in kg) -19-25 Flow -Single Flow Product Type-Stationary Input Voltage-220 Country of Origin - Made in India Oxygen Concentrator Servotech's Oxygen Concentrator is designed especially with the aim of meeting the demands of auxiliary oxygen to the patients in need. This lightweight, noiseless, and portable oxygen concentrator device maintains a steady flow of oxygen which can be easily adjusted according to the patient's need. The ST-DE-2A Oxygen machine maintains a flow of 1-10 LPM instrumental in providing a 24-hour continuous supply of oxygen. With an inbuilt pure copper oil-free compressor, the device ensures a seamless flow of oxygen. The oxygen concentrator is also powered by an Aluminium-Magnesium alloy cooling fan, promising an elongated life and enhanced performance. The equipment is extremely easy to use and comes with an HD LCD touchscreen, paired with an on-the-go power saving mode, which allows you to use the oxygen supply while sleeping. The oxygen concentrators come in two variations, one which produces 5 LPM oxygen, and the other which produces 10 LPM oxygen. Both machines are paired with a pressure alarm, a power off alarm, and an abnormal voltage alarm. This medical-grade oxygen generator weighs around 19-25kgs, with an input AC of 220V and 50Hz, and takes up less than 400VA of power, running continually for 2000hrs straight. Switching to this sleek device in hospitals can ensure larger operational space for the surgical staff and low maintenance as compared to the traditional, bulky oxygen cylinders. Park it next to the patient's bed, plug it in, and get an uninterrupted flow of oxygen for long hours. With adjustable flows between 1 to 10 LPM, you can make changes to the flow rate as per the patient's oxygen requirement.
Source - CHENG Category - 12/31 Unit - PCS Certs - FDA CE
It is suitable for oxygen transmission performance testing of films, sheets, paper, packaging, and related materials in the fields of food, medicine, medical equipment, daily chemicals, photovoltaic electronics, etc., and provides a wide range and high-efficiency oxygen transmission rate detection for high, medium and low oxygen barrier materials.
Sterile Twin Bore Nasal Oxygen Set
Pressure:High Material:steel Use:Medical Gas Product name:O2 gas cylinder Color:As the picture/Customized Standard:ISO9809-3 Outside diametor:219MM Water capacity:40L Height(without valve):1315mm Weight(without valve/cap):48Kg Service pressure:15mpa Design wall thickness:5.7mm
Technology brief There has been a growing demand for small and medium-sized oxygen equipment with rapid development of the national economy in recent years. Beijing Peking University Pioneer Technology Co., Ltd. (hereinafter referred to as PKU PIONEER), seizing this market opportunity with its advanced technology and engineering experience of more than 100 sets of oxygen equipment, has produced the customized the new skid-mounted PSA oxygen equipment through its continuous development and innovation. The PSA-O2 generator meets a wide range of requirements for users in need of small and medium-sized oxygen equipment. It has remarkable advantages on its stability, simplicity, efficiency and energy saving. Production Capacity 50Nm3/h-450Nm3/h, equivalent to liquid oxygen of about 1.7 TPD-15.4 TPD. Typical Applications The PSA-O2 generator is widely used in water treatment, flue gas ozone denitrification, kiln combustion, pulp bleaching, aquaculture, medical and other fields. Technical Advantages 1. Advanced single-vessel process Compared with the traditional double-vessel process, the world-leading single-vessel process requires less equipment but brings more stable performance with easier operation and maintenance. 2. High efficiency lithium-based molecular sieve The third generation of high-efficiency lithium-based oxygen generation molecular sieve (PU-8) has a lithium ion exchange rate of over 99%, bringing plenty of advantages such as high strength, high nitrogen and oxygen selectivity, large bulk density, uniform particles, long service life, etc. In combination with the proprietary automatic filling technology, the stability of the molecular sieve bed is effectively guaranteed. 3. Special valves for oxygen generation Special valves for oxygen generation are more suitable for VPSA oxygen process, offering good sealing, fast switching speed, stable performance and other characteristics, along with outstanding low failure rate and easy maintenance. 4. Modular integrated design Compared with the conventional double-vessel process, the equipment is more compact and the plot area can be reduced by more than 20%. 5. Low operation cost The power consumption of oxygen is as low as 0.29-0.32kWh/Nm3, the annual maintenance cost is 30% lower than that of a common PSA oxygen generator. The annual comprehensive operation cost is also reduced by more than 50%, compared with the cost of common PSA oxygen generator or purchasing liquid oxygen.
Technology Brief Based on the principle of VPSA technology, the VPSA-O2 units adopt the special adsorbent (model: PU-8) to enrich the oxygen in the air and supply it to the user. Production Capacity 1000Nm3/h~40000 Nm3/h, Converted to liquid oxygen: 34 TPD~1360 TPD Typical Applications > Steel: Blast furnace oxygen-rich coal injection, electric furnace steelmaking > Non-ferrous metallurgy: combustion-supporting for non-ferrous metals metallurgy including copper, lead, nickel, zinc, tin and gold. > Chemical: gasification furnace oxygen-rich gas making, carbon black production, sulphur trioxide production etc. > Kiln energy-saving: combustion supporting for glass kilns, cement kilns and oxygen-rich combustion supporting for waste incinerators > Papermaking: pulp bleaching process > Sewage treatment: OEAA technology, oxygen source for ozonizer Technical Advantages 1. Experienced engineering PKU PIONEER has built the most VPSA-O2 plants in China, including the world's largest VPSA-O2 plant. 2. Excellent energy consumption Energy consumption of PKU PIONEER's VPSA-O2 plant is 0.29-0.32kWh/m3 O2, which is among the lowest, around the world. 3. Internationally-leading process design PKU PIONEER has built up the first set of radial bed in China. Independently-developed five-bed, air intake and other original process designs have proved obvious advantages. 4. The independently-developed lithium-based adsorbent PKU PIONEER's independently-developed and produced lithium-based VPSA-O2 adsorbent PU-8 is featured by high selectivity and high working capacity of nitrogen, which is among the best around the world. 5. Mature and reliable system running The long-term engineering practice has proved that PKU PIONEER's VPSA-O2 plants are stable and the supplementary devices are mature and reliable, thus ensuring the continuous production for users.
1 year warranty
Sodium percarbonate,
Manufacturer of Oxygen Absorber
10L Oxygen concentrator. Weight - 22Kg
Details refer to photos & specs. Have stock & fast production We are working with the factory directly. DO NOT BOTHER IF YOU ARE NOT A SERIOUS BUYER. THANK YOU
Power Supply: AC230 ±22V/50Hz AC115 ±10V/60Hz Power Consumption: