ABB MCB System pro M compact S200M miniature circuit breakers are current limiting. Theyhave two different tripping mechanisms, the delayed thermal tripping mechanism foroverload protection and the electromechanic tripping mechanism for short circuitprotection. They are available in different characteristics (B,C,D,K,Z), configurations(1P,1P+N,2P,3P,3P+N,4P), breaking capacities (up to 10 kA at 230/400 V AC) and ratedcurrents (up to 63A). All MCBs of the product range S200M comply with IEC/EN 60898-1 and IEC/EN 609 47-2, allowing the use for residential, commercial and industrialapplications. Bottom-fitting auxiliary contact can be mounted on S200M to save 50%
BRAND : SCHNEIDER MCB 6A - 32A Single Pole Schneider Miniature Circuit Breaker. Product Specification No.of poles 1-4 Pole Rated current 6 to 63 A Voltage 240-415 V Breaking Capacity 10 kA Frequency 50 Hz Curve Type B and C tripping curves Brand Schneider
SIWOB Series MCB: Product description : SIWOB series MCB Scope of application They are applicable to the circuit with rated voltage of up to 400V and rated current of up to 125A to provide overcurrent protection for line facilities and electrical equipment in the buildings and similar places or for infrequent make-break operation Work environment in use and installation conditions Work environment in use and installation conditions The altitude of installation site shouId not be more than 2,000m; The ambient air temperature is -5 - +40, and the average temperature within 24h shouId be not higher than +35, When the maximum temperature is +40, the air relative humidity is not higher than 50%, and a higher relative humidity can be tolerable at relatively low temperature for examplethe relative humidity is 90% at +20; Pollution degree 2 (i.e.There is non-conductive pollution under normal circumstances , but transient conductivity is taken into consideration due to accidental condensation), Vertical installation, error is ±5° Terminal electrical equipment is installed on TH35-7 mounting rails Product origin : Shenyang Key Specifications/Special Features : SIWOB-1A~125A/4P C
Miniature Circuit Breakers 1) BK series. - BKN : 1 to 4pole up to 63A & 6kA (IEC60898-1) -BKN-b: 1 to 4pole up to 63A 10kA (IEC60898-1) - BKH : 1 to 4pole from 63 to 125A 10kA (IEC60947-2) 2) BF series - 6~50A Max 2.5kA at 415VAC (IEC60947-2) 3) BS series - 6~30A, 1.5kA at 110/220VAC 4) Certifications: CE, KEMA, SEMKO, CQC/CCC, SABS, SASO, GOST, UL1077, SNI
Technical data 1/ pole no.: 1p, 1p+n, 2p, 3p, 3p+n, 4p 2/ rated voltage: ac 230/400v 3/ rated current (a): 1, 2, 3, 4, 6, 10, 13, 16, 20, 25, 32, 40, 50, 63 4/ tripping curve: b. C. D 5/ rated short-circuit capacity(icn): 6000a 6/ rated frequency: 50/60hz Panel mounting 12pieces one middle box, 20middle boxes one carton
Characteristics: Standard: IEC60898 Rated current In (A): 1,2,3,4,6,10,13,16,20,25,32,40,50,63 Rated voltage Ue (V): 230/400 Poles: 1P, 1P+N, 2P, 3P, 3P+N4P Rated insulation voltage Ui (V): 500 Rated impulse withstand voltage (V): 6000 Rated breaking capacity: 10KA Rated frequency: 50/60Hz Trip curve: B, C, D Thermal operating limit: (1.13~1.45)¡ÁIn Energy limiting cass: 3 Mechanical lfe: 20 000 Electrical lfe: 4000 Mount: on 35mm DIN rail. The Gross weight 14kg The dimension 46.5*23.5*17 cm M.O.Q 500pcs (Samples Excepted) Payment term T/T, L/C,D/P,O.A Delivery time Usually 25 days (Negotiable for different order quantity) Promote the products with our own brand (As one of our agents in your market) Promote the products with neutral packing.
FeaturesComply with the main International IEC 898 standard & specifications - Ratings 2A, 4A, 6A, 10A, 16A, 20A, 25A, 32A,40A, 50A, 63A - 1P, 2P, 3P, 3P+SN available (4P & 1P+SN on request) - 18mm modular width per pole - Suitable for DIN rail mounting in OEM / panel - builder enclosures - Padlock or seal can be fitted in ON or OFF position - Current limiting operation under fault conditions - Wide range of accessories SpecificationsMagnetic release: Test current Tripping time B 3 In5 In t > 0.1st < 0.1s Application: Electrical heating,Water heater,Stoves Test current Tripping time C 5 In10 In t >0.1st < 0.1s Application: Lighting,Socket outlets,Small motor Test current Tripping time D 10 In20 In t > 0.1st < 0.1s Application: Control and protection of circuits having important transient inrush currents (large motor) Thermal release: Tripping time Test current t > 1 h(In < 63 A) 1.13 In t > 2 h(In > 63 A) t > 1 h(In < 63 A) 1.45 In t > 2 h(In > 63 A) 1s < t < 60s (In32 A)
The main contacts of circuit breaker mainly are intended to be connected to circuits, the rated voltage of which does not exceed 1000V A.C. or 1500V D.C. - Circuit Breakers for use in industrial environments. - Ratings 0.5A, 1A, 2A, 4A, 6A, 10A, 16A, 20A,25A, 32A, 40A, 50A, 63A - Current limiting operation under fault conditions - 1P, 2P, 3P, 3P+SN available (4P & 1P+SN on request) - Padlock or seal can be fitted in ON or OFF position - Suitable for DIN rail mounting in OEM / panel builder enclosures - Wide range of accessories a. Use at DC (the magnetic tripping current is +/-40% higher than at A.C.) b. Use at 400 Hz (the magnetic tripping current is ~50% higher than A.C. 50/60 Hz) c. Shock resistance (in X, Y, Z direction) d. Vibration resistance (in X, Y, Z direction) e. Operation temperature (from -55oC to +55oC) SpecificationsComply with the main International IEC 947-2 standard & specifications. Magnetic release: GE Power Control offers instantaneous tripping ranges - release between 3 and 5 In - release between 5 and 10 In - release between 10 and 20 In Thermal release: Tripping time Test current t > 1 h(In < 63 A) 1.05 In t > 2 h(In > 63 A) t > 1 h(In < 63 A) 1.30 In t > 2 h(In > 63 A)
Features- Ratings 2A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A - 1P, 2P, 3P, 3P+N available (4P & 1P+SN on request) - 18mm modular width per pole - Suitable for DIN rail mounting in OEM / panel builder enclosures - Padlock or seal can be fitted in ON or OFF SpecificationsMagnetic release: Curve B: Test current 3 In, t > 0.1s 5 In, t < 0.1s Only for resistive load such as: Electrical heating,Water heater, Stoves Curve C: Test current 5 In, t >0.1st 10 In, t < 0.1s Usual load such as: Lighting, Socket outlets & Small motor
Contactor & Relay, Dol Starters, Capacitors, MCB, RCCB, MCCB MPCB, SFU & HRC Fuse Changeover Switch. Cable & Wires, Lugs & Gland, Rotry & Limit-Switches,Meters, Proximity & Senso, Panel Accessories.
Provide Miniature Circuit Breaker, contact firstname.lastname@example.org for more information. Pole No:1,1P+N,2,3,3P+N,4 Rated voltage:AC 230/400V Rated current(A): 1,2,3,4,6,10,13,16,20,25,32,40,50,63
The rates may vary from 1 to 10 $ as per size and specification guages.We are into manufacturing since many years and our range goes upto 19 tpn box manyfacturing. We also make d.P boxes as per customer specification. Minimum lot size of 100 pcs